SAF Tehnika AS ARANETMINI Low Power Transmitter User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3748253
Application ID	59WgTp3z+yUm9vFYpVZM1w==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	274.35kB (3429380 bits)
Date Submitted	2018-02-09 00:00:00
Date Available	2018-03-26 00:00:00
Creation Date	2018-02-07 15:24:14
Producing Software	Adobe PDF Library 10.0.1
Document Lastmod	2018-02-07 15:25:41
Document Title	User Manual
Document Creator	Adobe InDesign CS6 (Windows)

USERS GUIDE
Aranet MINI User’s Guide
FCC Compliance statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the device.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from the one the receiver is connected to.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with a minimum distance of 20cm
between the radiator and any part of your body.
Changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
Aranet MINI does not contain serviceable parts. Warranty will not be applicable in the event Aranet MINI
has been opened.
The information presented in this guide is the property of SAF Tehnika, JSC. No part of this document may
be reproduced or transmitted without proper permission from SAF Tehnika, JSC.
The specifications or information contained in this document are subject to change without notice due
to continuing introduction of design improvements. If there is any conflict between this document and
compliance statements, the latter will supersede this document.
SAF Tehnika, JSC has no liability for typing errors in this document or damages of any kind that result
from the use of this document.
To get up to date information about accessories and their availability, please contact sales representative.
Copyright Notice
Copyright © 2017 SAF Tehnika, JSC. All rights reserved.
Industry Canada Regulatory Statement
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following
two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired
operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts
de licence. L’exploitation est autorisée aux deux conditions suivantes: (1) l’appareil ne doit pas produire
de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si
le brouillage est susceptible d’en compromettre le fonctionnement.
TABLE OF CONTENTS
Introduction
Aranet MINI Base Station Overview
What’s in the box
Aranet MINI ports
Aranet MINI Datasheet
Initial set up
Device functionality
Main menu
Settings
Alarms
Password
Screen
Exporting the data
Advanced
Terms of use
10
Warranty
10
RMA (Return Merchandise Authorization) form
14
Intellectual Property Rights
14
Cleaning And Maintenence
14
Accessories
15
Disclaimer
15
Additional information
15
Introduction
Aranet offers environmental monitoring solutions for a variety of businesses.
The base station has exceptional sensitivity of -129dBm and allows placing sensors within line - of - sight
range of at least 3km/1.9mi.
All Aranet MINI base stations come with preinstalled software that allows for viewing of data in real
time, set thresholds for alarms as well as exporting data for further analysis. Simple UI/UX design of the
software in combination with resistive touchscreen enables easy navigation even with gloves on.
Visit www.aranet.com for more information.
ARANET MINI BASE STATION OVERVIEW
What’s in the box
(1) Aranet MINI base station
(2) Aranet MINI base station mount
(3) AC power adapter
Aranet MINI ports
Back
Bottom
(1) On/off switch
(2) Micro USB port
(3) Micro USB port
!NOTE! Don’t utilize both of the USB ports at the same time
Terms of use
The Customer is obliged to guarantee the usage, maintenance, and preservation of the Equipment
at their own expense in a way that excludes the Equipment’s theft, loss, destruction, harming and/or
damaging (including as a result of mechanical damages, moisture, liquid related damages, lightning
and/or other similar events). The base station may only be used indoors, it needs to be protected from
environmental impact (snow, rain, direct sunlight).
Aranet MINI Datasheet
Aranet MINI
Maximum sensors amount
12
Barometer
Built-in
Alarm type
Built-in audio alarm
Memory
10+ years with 12 sensors
Receiver sensitivity
-129 dBm
Channels
Channel 1: 917.6 MHz
Channel 2: 918.4 MHz
Channel 3: 919.2 MHz
Channel 4: 920.0 MHz
Channel 5: 920.8 MHz
Channel 6: 921.6 MHz
Channel 7: 922.4 MHz
Graph range
Temperature: -40°C to 120°C/ -40°F to 248°F
Humidity: 0% to 100%
Pressure: 280 hPa to 1050 hPa
Data resolution
Temperature: 0.1°
Humidity: 1%
Pressure: 1 hPa
Data protection
Password for settings screen, encryption for data
Communication
USB cable to PC
Power options
AC Power adapter
USB cable from PC
Built-in battery (backup power up to 8h)
Operating temperature
0°C to 40°C / 32°F to 104°F
Operating humidity
0% to 100% non-condensing
Interface languages
English, French, German, Spanish, Portuguese, Latvian
Display
LCD, 4.3 inch, 480x272 px, resistive touchscreen
Dimensions
79x137x27 mm / 3.11x5.4x1.06 w/o stand
Ports
2 USB micro B
Weight
180g / 6.4oz w/o stand
Construction
ABS Plastic
Protection class
IP40
FCC Marking
Yes
Included
AC power adapter with USB cable, stand
INITIAL SET UP
(1) Turn on the device – the power switch is situated at the bottom, next to the USB port. You should
now see the main screen. If no sensors are attached only the atmospheric pressure readings will
be displayed. In the upper right corner the settings menu icon
is located.
(2) Attach the power supply to one of the two USB ports, depending on how the device will be
positioned. In case it will be placed on a flat surface attach the included stand to the device. Once
it is done the battery icon in the middle of the top row of the main screen will be changed to a
plug icon.
(3) Before adding sensors, tap then Time menu. Set correct time and date – it will ensure that the
data is represented correctly. Tap
to return to the main menu or back to return to settings
menu.
(4) Tap
, then choose Sensors menu and tap the Setup button. Set up a sensor by following the
instructions on the screen. After successfully setting up a sensor, the sensor ID and the name of
the sensor will appear on the left side of the screen. Sensors are given name “SENS ”
automatically. Tap the name of the sensor to give it a new name with length up to 8 symbols. In
order to remove a sensor just press the
sign next to it.
(5) Set up other sensors in the same manner.
• To add more than 6 sensors, press the page button on top.
• To change the order of the sensors, press
and
want to move and then – where you want to move it to.
• Tap the home button to return to the main menu.
. Then press on the sensors you
DEVICE FUNCTIONALITY
Main menu
The top row displays the current date and time, and whether the unit is plugged in or relying on battery
power. In case it is relying on battery power it will display a visual indication of battery charge left. This is
also where you can find the settings
button.
The sensors refresh information every 10 minutes. If there is no information received from a sensor for
more than 30 minutes, the name of the sensor turns red.
On the right side of the name of the sensor, the strength of the received radio signal from the sensor and
the battery level
are shown. On the left side the most current temperature and humidity readings
are displayed.
One page can show up to six sensors, if more sensors are attached they can be viewed by tapping the
Page button.
Tapping the temperature indication
will resize it. Holding it pressed down will make it go full
screen.
Tapping the atmospheric pressure indication
will show the atmospheric pressure graph. For
best data representation it is recommended to set the current altitude as it adjusts the scale of the graph.
Tapping the name of the sensor will show the corresponding temperature and relative humidity graphs.
The time period shown can be modified with the options under the graphs, these options are one day,
one week or one month. The next row of icons are for navigating the data – arrow keys allow shifting
to the next or previous time period that is currently selected and the middle icon opens up a calendar
where it is possible to quickly navigate to a particular date, week or month. The save icon allows you
to make a quick snapshot of the graphs that will be saved in the device. The minimum and maximum
bounds of the temperature graph can be changed by tapping on them.
Settings
To enter the settings menu press on the
the home
icon in main menu. To get back to the main menu just tap
icon that is available on most settings pages.
On the bottom of the settings menu it is possible to change the Language used by the device by tapping
the appropriate country code. The language code that is highlighted green is the one that is currently in
use.
Alarms
The alarm can be set by tapping
activated by tapping
, then
. The sound of the alarm can be
(turns red). If the value registered by the sensor is equal or lower than that set
under the blue arrow, the alarm will sound and corresponding indication in the main menu will turn blue.
If the value registered by the sensor is equal or higher than that set under the red arrow, the alarm will
sound and corresponding indication in the main menu will turn red. By tapping on the colored indication,
the sound is temporarily turned off. Once the values are back in the set range the sound is also turned off.
Password
It is possible to set up an 8 digit password that will be required every time a person tries to access the
settings menu. As it is just a simple tamper proof mechanism, in case the password is forgotten the
password DEFAULT will allow bypassing it.
Screen
The device has a built in light sensor, which automatically adjusts the brightness of the screen depending
on how well lit is the environment around it. In this menu it is possible to also set up a fixed brightness
in case it is preferred.
Two background colors are also available – black and white – which can be chosen to suit your personal
preferences.
Exporting the data
Temperature, relative humidity and atmospheric pressure measurements are automatically saved in
the device where they are sorted by year, month, date and the name of the sensor. The base station has
enough memory to save data for more than a decade, even if no data exports are made. The graphs can
be saved as images by tapping
. Data and images are accessible when device is connected to a
PC using USB cable. Data is saved in *.csv format, which can be opened by most spreadsheet software
(including Microsoft Excel).
Advanced
Advanced features let you access the terminal to see the raw data about incoming signals – it displays
the sensor ID, relative humidity and temperature measurement, sensor battery voltage, signal strength
and time of received signal.
Channel menu allows you to choose from available radio channels for your device. In order to know
which one is best a channel test can be performed – it will show which one has the largest amount of
activity and thus choosing the least active radio channel can give you a more reliable data stream. The
test takes 20 minutes to complete on Aranet MINI during which no data from sensors will be received!
TERMS OF USE
Aranet MINI base station - The Customer is obliged to guarantee the usage, maintenance and preservation
of the Equipment at their own expense in a way that excludes the Equipment’s theft, loss, destruction,
harming and/or damaging (including as a result of mechanical damages, moisture, liquid related damages,
lightning and/or other similar events). Base station may only be used indoors, it needs to be protected
from environmental impact (snow, rain, direct sunlight).
!NOTE! For the full Terms and Conditions, please visit: https://aranet.com/terms-and-conditions/
Aranet MINI is supplied with built in UPS providing up to 8 hours of power supply in case of
power shortage or portable use. It is meant only as a back up. If the device is charges the UPS on Power
ON position it may suffer permanent damage.
!WARNING!
ARANET MINI BASE STATIONS CONTAIN AN LI-ION 14500 PROTECTED TYPE RECHARGEABLE BATTERY
AND A CR2032 TYPE BATTERY. RISK OF DAMAGE IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
THE USER IS RESPONSIBLE FOR DISPOSAL OF BATTERIES ACCORDING TO THE STATE LEGISLATION.
WARRANTY
ARANET WARRANTY
SAF, which includes SAF Tehnika and SAF North America, LLC, has built a reputation on providing
high-quality products to its customers and it stands behind each product it manufactures, including
Aranet. Accordingly, SAF warrants the products it manufactures will be free from defects in material or
workmanship and will function in accordance with their official written specifications for a minimum of
two years as long as they are used and stored in accordance with industry standards and any unique
handling instructions provided by SAF. While SAF warrants all of its products will function in accordance
with their official written specifications, SAF does not warrant all products will function uninterrupted or
error free. Further, verbal or informal specifications will not be covered by the Warranty. To be enforceable,
a product specification must be stated in SAF official literature. No product shall be considered defective
or otherwise in breach of the Warranty simply because it needs to be adapted to or otherwise does not
comply with the laws and regulations (including frequency range) of the customer’s home country or
jurisdiction.
WARRANTY TERM
The Warranty shall apply to Aranet 24 months after it is shipped to the customer. An invoice itemizing
a product’s warranty period shall be included with the product when it is delivered to the customer. No
verbal extensions or modifications of the Warranty shall be enforceable.
WARRANTY LIMITATIONS
The Warranty shall be voidable at SAF’s discretion in any circumstance where a SAF manufactured
product has been damaged by a customer’s conduct or an act of God including, but not limited to: a.)
10
damage caused by the customer’s improper use of the product; b.) mechanical damage caused by a
physical impact; c.) the accumulation of moisture or water in a product’s housing; d.) damage caused by
wind, hail, rain, animal, insect or other environmental events; and e.) electromagnetic damage caused by
a power surge, overvoltage, or a strike of lighting. Finally, for the Warranty to be effective, all repairs and
modifications to a product, including its software, must be performed by SAF and the Warranty shall be
voidable at SAF’s discretion in any circumstance where a customer or its agent opens a product’s housing
or otherwise attempts to modify or repair a product, including its software, without SAF’s permission.
There are currently no third-parties authorized to repair SAF’s products.
Product Repairs & Liability Limitations
In the event a SAF manufactured product does not conform with the Warranty, SAF will fix or replace the
non-functioning product in accordance with the return and repair policy below. These options shall be a
customer’s sole remedy.
IN NO EVENT SHALL SAF BE LIABLE FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES ARISING OUT OF OR RELATING TO THE SALE OR USE OF ITS PRODUCTS, WHETHER OR NOT SAF
HAS ADVANCE NOTICE OF THE POSSIBILITY OF SUCH DAMAGES. SAF’S SOLE AND EXCLUSIVE MAXIMUM
LIABILITY FOR ANY LEGAL CLAIM ASSOCIATED WITH A SALE COMPLETED PURSUANT TO THESE TERMS
OR THE WARRANTY, REGARDLESS OF WHETHER SUCH CLAIM SOUNDS IN CONTRACT OR TORT, LAW
OR EQUITY, SHALL NOT EXCEED THE PRICE OF THE PRODUCT(S) SOLD TO A GIVEN CUSTOMER. BY
SUBMITTING THEIR PURCHASE ORDER, EACH CUSTOMER KNOWINGLY WAIVES ANY AND ALL CLAIMS
AND DAMAGES PRECLUDED BY THE FOREGOING LIMITATIONS INCLUDING, BUT NOT LIMITED TO, ALL
CLAIMS ASSOCIATED WITH PERSONAL INJURIES (INCLUDING ANY CLAIMS BASED IN PRODUCT OR STRICT
LIABILITY), LOST REVENUE AND PROFITS, LOSS OF TECHNOLOGY, LOSS OF RIGHTS OF SERVICES, UNFAIR
COMPETITION AND COMMERCIAL LOSSES OF ANY KIND.
ACCEPTANCE, RETURNS & REPAIRS
If Customer has not received the goods he can contact SAF to help solving the problem. The claim of nonreceived goods should be raised within 60 days from the date of payment. No assistance will be available
after the term of 60 days has passed. Prior to raise a claim to SAF, Customer should ascertain that a
parcel is not received by any other person in Customer’s premises. Also, Customer is asked to ascertain
that a parcel is not left at any of the neighbours, etc.
SAF keeps the right to perform an investigation for a period of 20 days. In the case SAF has made a
decision to compensate Customer for the losses, either a new product may be sent to customer or the
price for the ordered product may be returned to Customer.
If Customer is not satisfied with a received product, he can proceed as described further. Restocking and
Refund is not applicable for legal entity.
Physical person which is a resident of US and Canada may require Restocking and Refund within 60
days from the date of payment. No Restocking and Refund will be available after the term of 60 days has
passed.
Physical person which is a resident of any country outside US and Canada may require Restocking and
Refund within 14 days from the date of payment. No Restocking and Refund will be available after the
term of 14 days has passed.
11
No more than one product (set), or a product for a price exceeding EUR 700 or USD 750 can be Restocked.
If the Restocking is accepted by SAF, the product(s) must be returned – unused, condition as brand new,
without any defects, without dirt and scratches, containing all original labels, full completion as received,
in original package as received. The shipment back to SAF is on Customer’s account.
If Customer has failed to meet all of the Restocking rules mentioned above, SAF keeps the right to refuse
the Refund, or reduce the amount of money returned.
If Customer has not requested a Restocking, Refund or raised a claim within 60 days from the date of
Invoice, the product (set) is considered to be accepted by Customer.
Shipping to SAF
If the failure is discovered to a SAF manufactured product, it will be given a Return Materials Authorization
(“RMA”) number and should be returned to SAF by completing the RMA form at https://aranet.com/rma/
and then shipping the non-functioning product in its original packaging (or packaging providing a similar
level of protection) to one of the facilities below.
Standard shipping address is:
SAF Tehnika
RMA Dep.
24a Ganibu dambis
Riga LV-1005
LATVIA
All North American customers should ship their products to:
SAF North America, LLC
3250 Quentin Street, Unit 128
Aurora, Colorado 80011
U.S.A.
(720) 502-0728
All returns shall be sent to SAF at the customer’s expense, and shall not be considered delivered until they
arrive at SAF’s facilities. SAF assumes no responsibility and shall not be liable for any products damaged
while in transit to SAF’s facilities. SAF strongly recommends the customer to purchase an appropriate
amount of insurance from the carrier they use to return the product(s) to SAF.
Inspection & Repair
Non-functioning product(s) shall be evaluated and treated as follows:
DOA. Any product discovered as non-functioning within 30 days after it is shipped to the customer, for
any reason other than a customer’s misuse or mishandling, shall be deemed “Dead on Arrival” or “DOA”
and replaced free of charge. Aranet products will be replaced no later than 20 business days after SAF
verifies its non-functioning status.
Warranty Repair. All products subject to the Warranty shall, depending on the circumstances, will be
repaired or replaced free of charge within 20 business days of their arrival at SAF’s facilities.
12
Non-warranty Repairs. SAF will repair a product for a period of 5 years after it is delivered to the customer.
All products repaired outside of the Warranty shall be repaired at the customer’s sole expense. A quote
for repair shall be provided to the customer via e-mail prior to the product being received by SAF or
within a reasonable time after the product arrives at SAF’s facilities. All repair and shipping costs must
be paid by the customer in advance. SAF shall repair and ship the non-functioning product within 20
business days of receiving full payment for the repairs.
Post-repair Warranty
All repaired products shall be subject to the Warranty for a period of six months after they are repaired.
The additional warranty described herein may extend but shall in no way reduce any pre-existing warranty
periods already applicable to the product.
Return Costs
If a given product is covered by the Warranty, SAF will pay the shipping costs associated with returning it
to the customer. If a product is outside of the Warranty, the customer shall pay all costs associated with
transmitting it to and from SAF. An estimated cost of return will be included in any repair invoice sent to
the customer, and must be paid before SAF will return a repaired product.
Shipping & Abandonment
Any non-functioning product remaining in SAF’s possession for three months after a customer receives
an invoice for repairs because the customer has failed to pay the invoice in question, shall be considered
abandoned. A customer’s rights in all abandoned products shall be considered forfeit and SAF shall have
the right to reprocess such products in any manner it sees fit.
Sole Warranty
UNLESS SAF AGREES TO ADDITIONAL OR ALTERNATE TERMS IN WRITING, THE WARRANTY DESCRIBED
HEREIN IS THE SOLE AND EXCLUSIVE WARRANTY OFFERED TO SAF’S CUSTOMERS, AND NO ADDITIONAL
WARRANTIES ARE GIVEN OR IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF
MERCHANTABILITY, NON-INFRINGEMENT, TITLE OR FITNESS FOR A PARTICULAR PURPOSE.
CHANGES TO THESE TERMS & CONDITIONS
We reserve the right to update or change our Terms and Conditions at any time and you should check
these Terms and Conditions periodically. Your continued use of the Service after we post any modifications
to the Terms and Conditions on this page will constitute your acknowledgment of the modifications and
your consent to abide and be bound by the modified Terms and Conditions.
13
RMA (RETURN MERCHANDISE
AUTHORIZATION) FORM
To file an RMA case, please fill out the form here: https://aranet.com/rma/
INTELLECTUAL PROPERTY RIGHTS
All intellectual property rights in or related to the Products including, but not limited to, patents, trade
secrets, know-how, copyright, trademarks, service marks, and mask rights, registered or unregistered,
owned or otherwise used by SAF, as well as all goodwill related thereto are and shall remain at all times
the exclusive property of SAF. None of the foregoing property rights may be exploited by SAF’s customers
except as provided in these Terms nor shall such rights be transferred to SAF’s customers except as
expressly provided in these Terms. Each customer shall take reasonable measures to protect SAF’s
intellectual property rights.
SAF’s and Aranet name and logo are proprietary trademarks and shall not be used without SAF’s explicit
permission. The customer shall further not alter or remove any proprietary marks, logos, or labels on
SAF’s Products.
!NOTE Read carefully
It is responsibility of the user to enforce the country regulation and the specific environment
regulation. Do not use this device if using the device is prohibited. Do not use the device if doing so
causes danger or interference with other electronic devices.
Keep away from children, Do not allow children or pets to bite or suck the device or accessories. Doing
so may result in damage or explosion. Observe local laws and regulations, and respect the privacy and
legal rights of others.
Do not disassemble the product; any mark of tampering will compromise the warranty validity.
We recommend following the instructions of this user guide for correct setup and use of
the product.
CLEANING AND MAINTENENCE
Keep the device and accessories dry. Do not attempt to dry it with an external heat source, such as
microwave oven or hair dryer.
Do not expose your device and accessories to extreme cold or heat. These environments may interfere
with proper function and may lead to fire or explosion.
Avoid collision, which may lead to device malfunctions, overheating, fire, or explosion.
Please handle the product with care, avoiding any dropping and contact with the internal
circuit board as electrostatic discharges may damage the product itself.
14
CAUTION: ARANET MINI BASE STATION CONTAINS AN ENCLOSED BATTERY. RISK OF DAMAGE IF BATTERY
IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
The user is responsible for disposal of the batteries according to the Universal Waste Rule. Batteries
should not be disposed of as household garbage. These items should not be disposed as of unsorted
municipal waste and should be taken to a certified collection point for recycling or proper disposal.
ACCESSORIES
Use only power supplies which are provided by manufacturer and in the original packaging of this
product.
Using unapproved or incompatible power adapter, charger or battery may cause fire, explosion or other
hazards.
Choose only accessories approved for use with this model by the device manufacturer. The use of any
other types of accessories may void the warranty, may violate local regulations and laws and may be
dangerous, Please contact your retailer for information about the availability of approved accessories in
your area.
DISCLAIMER
All contents of this manual are provided “as is”. Except as required by applicable laws, no warranties of
any kind, either express or implied, including but not limited to, the implied warranties of merchantability
and fitness for a particular purpose, are made in relation to the accuracy, reliability or contents of this
manual.
To the maximum extent permitted by applicable law, in no event shall SAF Tehnika JSC be liable for
any special, incidental, indirect, or consequential damages, or loss of profits, business, revenue, data,
goodwill savings or anticipated savings regardless of whether such losses are foreseeable or not.
ADDITIONAL INFORMATION
For additional information, please contact helpdesk@aranet.com
15
16
SAF Tehnika JSC
24a, Ganibu Dambis
Riga, LV-1005, Latvia
Copyright Notice | Copyright © 2017 SAF Tehnika, JSC. All rights reserved.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30
Create Date                     : 2018:02:07 15:24:14+02:00
Metadata Date                   : 2018:02:07 15:25:41+02:00
Modify Date                     : 2018:02:07 15:25:41+02:00
Creator Tool                    : Adobe InDesign CS6 (Windows)
Instance ID                     : uuid:326ec588-9964-4b85-b7c4-0f70ba873e69
Original Document ID            : xmp.did:A9DA01CC1F83E71183498848CB8F17AF
Document ID                     : xmp.id:A5770F2F0A0CE8118A48E048864FBD5E
Rendition Class                 : proof:pdf
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Windows)
History Changed                 : /
History When                    : 2018:02:07 15:24:14+02:00
Derived From Instance ID        : xmp.iid:A4770F2F0A0CE8118A48E048864FBD5E
Derived From Document ID        : xmp.did:A9DA01CC1F83E71183498848CB8F17AF
Derived From Original Document ID: xmp.did:A9DA01CC1F83E71183498848CB8F17AF
Derived From Rendition Class    : default
Format                          : application/pdf
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Page Count                      : 22
Creator                         : Adobe InDesign CS6 (Windows)

EXIF Metadata provided by EXIF.tools