SAGEMCOM BROANDS DGCI384 Video Gateway User Manual

SAGEMCOM BROADBAND SAS Video Gateway Statements

a href="https://usermanual.wiki/SAGEMCOM-BROANDS" itemprop="url"> SAGEMCOM BROANDS >

Contents

User manual (Statements).pdf

Optimum A service of Altice. Service Terms & Information. Safety Information. Important Safety Compliance Instructions • Read and retain instructions from the manufacturer of your equipment. • Place the electronic equipment in a location that is easily accessible and close enough to an electrical outlet to accommodate the length of the power cord and unplugged quickly in case of a problem. Note: Place the electronic equipment on a stable surface. The surface must support the size and weight of the electronic equipment. • The electronic equipment has openings for ventilation that protect it from overheating. To ensure the reliability follow these guidelines to avoid obstructing the openings: - Do not place other equipment, lamps, books, vases with liquid, or any other object on the top of the electronic equipment. - Do not place in any of the following locations: (1) Outdoors; (2) On a bed, sofa, rug, or similar surface; (3) Over a radiator or a heat register; or (4) In an enclosure, such as a bookcase or equipment rack, unless the installation provides proper ventilation. • Before cleaning the electronic equipment, unplug it from the electrical outlet. Use a damp cloth to clean. Do not use a liquid cleaner or an aerosol cleaner. Do not use a magnetic/static cleaning device (dust remover) to clean the electronic equipment. • Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. • Do not expose the electronic equipment to liquid or moisture. • Do not place on a wet surface. Do not spill liquids on or near the electronic equipment. • Do not use accessories with the electronic equipment unless recommended by your cable service provider. • Do not overload electrical outlets, extension cords, or integral convenience receptacles, as this can result in a risk of fire or electric shock. • Ground (earth) your cable system to provide some protection against voltage surges and built-up static charges. Plug your electronic equipment into a surge protector to reduce the risk of damage from lightning strikes and power surges. If you have questions, call your cable service provider. • Arrange all power cords so that people can’t walk on the cords, place objects on the cords, or place objects against the cords, which can damage them. Give particular attention to the cords at the point at which the cord connects to the plug, at electrical outlets, and at the places where the cords exit the electronic equipment. • A label on the electronic equipment indicates the correct power source. Operate only from an electrical outlet that has the voltage and frequency that the label indicates. If you are unsure of the type of power supply to your residence, consult your local power company. • The electronic equipment has a two-prong plug. Properly ground (earth) by inserting the plug into a grounded electrical, two-socket outlet. If this plug is polarized, it has one wide prong and one narrow prong. This plug fits only one way. If you are unable to insert this plug fully into the outlet, contact an electrician to replace your obsolete outlet. • Do not open the cover of the electronic equipment. Refer all servicing to qualified personnel only. Contact Optimum for instructions. • For damage that requires service, unplug the electronic equipment from the electrical outlet. Refer to qualified personnel when any of the following occurs: (1) There is damage to the power cord or plug; (2) Liquid enters the electronic equipment; (3) There is exposure to rain or water;
Download:
Mirror Download [FCC.gov]
Document ID3264282
Application IDNLr/EpND6LTSk0W8r0nI6g==
Document DescriptionUser manual (Statements).pdf
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize13kB (162510 bits)
Date Submitted2017-01-19 00:00:00
Date Available2017-02-23 00:00:00
Creation Date2017-01-13 16:22:54
Producing SoftwareMicrosoft® Word 2010
Document Lastmod2017-01-13 16:22:54
Document TitleUser manual (Statements).pdf
Document CreatorMicrosoft® Word 2010
Document Author: Samantha Sicari
FCC ID Filing: VW3DGCI384

Navigation menu