SAGEMCOM BROANDS PPX4350 Pocket Projector User Manual PPX4350 UM EN 253xxxxxx
SAGEMCOM SAS Pocket Projector PPX4350 UM EN 253xxxxxx
Contents
- 1. User Manual pt 1
- 2. User Manual pt 2
User Manual pt 1
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2459488 |
| Application ID | cpklB5IEtaZMwX6jWy++Zg== |
| Document Description | User Manual pt 1 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 303.02kB (3787735 bits) |
| Date Submitted | 2014-12-01 00:00:00 |
| Date Available | 2014-12-01 00:00:00 |
| Creation Date | 2014-09-16 09:05:13 |
| Producing Software | Acrobat Distiller 11.0 (Windows) |
| Document Lastmod | 2014-09-16 09:05:13 |
| Document Title | PPX4350_UM_EN_253xxxxxx.book |
| Document Creator | FrameMaker 10.0.2 |
| Document Author: | g092899 |
PPX4350_UM_EN_253xxxxxx.book Page 1 Mardi, 16. septembre 2014 12:52 12 Register your product and get support at www.philips.com/welcome PPX 4350 EN User Manual PPX4350_UM_EN_253xxxxxx.book Page 2 Mardi, 16. septembre 2014 12:52 12 Table of contents Dear Customer ....................................................................3 About this User Manual 3 What's in the Box 3 Product Highlights 3 WiFiDisplay (Miracast) ........................................................3 General Safety Information .....................4 Setting up the Device ..........................................................4 Power Supply ........................................................................4 Repairs ....................................................................................5 Overview ...................................................6 Service ..................................................... 18 Care Instructions for the Battery .................................. 18 Battery deep discharge ..................................................... 18 Cleaning ............................................................................... 19 Device Overheated ........................................................... 19 Update Firmware with Memory Card .......................... 19 Troubleshooting ................................................................. 20 Appendix ................................................. 22 Technical Data .................................................................... 22 Accessories ......................................................................... 22 Top of the Device ................................................................6 Side View ................................................................................6 Bottom of the Device .........................................................6 Overview of the Menu Functions .....................................7 Symbols in the Statusbar ....................................................7 Initial Operation .......................................8 Setting up the Device ..........................................................8 Connect Power Supply / Charge Battery .......................8 Initial Installation ...................................................................8 + functions .................................................9 Flashlight .................................................................................9 SOS light .................................................................................9 Warning light .........................................................................9 Connect to the Playback Device ...........10 Connecting to Devices with HDMI Output ................10 Connecting the headphones ............................................10 Memory ...................................................11 Inserting a Memory Card .................................................11 Connecting USB Storage Medium ..................................11 Miracast ...................................................12 Bluetooth .................................................13 Activating the Bluetooth connection .............................13 Setting up Bluetooth parameters ...................................13 Media Playback .......................................14 Video playback ....................................................................14 Photo Playback ...................................................................15 Music Playback ....................................................................15 Managing Files .....................................................................16 Settings ....................................................17 Overview of the Menu Functions ...................................17 Philips · PPX 4350 PPX4350_UM_EN_253xxxxxx.book Page 3 Mardi, 16. septembre 2014 12:52 12 Dear Customer What's in the Box Thank you for purchasing our Pocket Projector. We hope you enjoy your device and its many functions! 1 – PicoPix Projector 2 – Quick Start Guide About this User Manual With the installation guide on the following pages, you can start using your device quickly and easily. Detailed descriptions can be found in the following sections of this user manual. Read the entire user manual carefully. Follow all safety instructions in order to ensure proper operation of your device. The manufacturer accepts no liability if these instructions are not followed. Symbols Used Notice Troubleshooting This symbol designates tips that will help you to use your device more effectively and easily. CAUTION! Damage to the Device or Loss of Data! This symbol gives warning of damage to the device and possible loss of data. This damage can result from improper handling. DANGER! Product Highlights Connecting to devices with HDMI output With the HDMI to mini HDMI cable you can connect the projector to a computer or laptop (see also Connect to the Playback Device, page 10). WiFiDisplay (Miracast) With the Miracast™ solution you can display video between Wi-Fi devices, without cables or a network connection. You can do things like view pictures or videos from a smartphone (Android 4 and more) or laptop (Windows 8.1) on your pocket projector. Danger to Persons! This symbol gives warning of danger to persons. Physical injury or damage can result from improper handling. PPX4350_UM_EN_253xxxxxx.book Page 4 Mardi, 16. septembre 2014 12:52 12 1 General Safety Information Do not make any changes or settings that are not described in this user manual. Physical injury or damage to the device or loss of data can result from improper handling. Take note of all warning and safety notes indicated. Setting up the Device The unit is for indoor use only. The device should be placed securely on a stable, flat surface. Position all cables in such a way that no one will stumble on them, thus avoiding possible injuries to persons or damage to the device itself. Do not plug in the device in moist rooms. Never touch the mains cable or the mains connection with wet hands. The device must have sufficient ventilation and may not be covered. Do not put your device in closed cabinets or boxes. Do not place the machine on soft surfaces such as tablecloths or carpets and do not cover the ventilation slits. Otherwise the device could overheat or catch fire. Protect the device against direct sunlight, heat, large temperature fluctuations and moisture. Do not place the device in the vicinity of heaters or air conditioners. Observe the information on temperature and humidity in the technical data. When the device is running for a long period of time, the surface becomes hot and a warning symbol appears on the projection. The device switches automatically to stand-by mode when it gets too hot. After the device has cooled down, you can continue playback by pressing any key. Do not allow liquids to enter into the device. Switch off the device and disconnect it from the mains supply if liquids or foreign substances end up inside the device. Have the unit inspected by a technical service department. Always handle the unit with care. Avoid touching the lens. Never place heavy or sharp objects on the projector or the power cable. If the projector gets too hot or emits smoke, shut it down immediately and unplug the power cable. Arrange for your device to be investigated by a technical service centre. To prevent the spread of fire, open flames should be kept away from the device. Under the following conditions, a layer of moisture can appear inside the device which can lead to malfunctions: • if the device is moved from a cold to a warm area; • after a cold room is heated; • when this device is placed in a damp room. Proceed as follows to avoid any moisture build-up: 1 Seal this device in a plastic bag before moving it to another room, in order for it to adapt to room conditions. 2 Wait one to two hours before you take the device out of the plastic bag. The device should not be used in a very dusty environment. Dust particles and other foreign objects may damage the unit. Do not expose the device to extreme vibrations. It may damage the internal components. Do not allow children to handle the device without supervision. The packing materials should be kept out of the hands of children. Power Supply Use only the enclosed power adapter (see chapter Appendix / Technical Data). Check whether the mains voltage of the power supply matches the mains voltage available at the setup location. This equipment complies with the voltage type specified on the unit. The capacity of the battery diminishes with time. If the device functions only with the power supply, the battery is defective. Contact an authorised service centre to replace the battery. Do not try to replace the battery yourself. Incorrect handling of the battery or using the wrong type of battery can cause damage to the device or cause injury. DANGER! Risk of explosion with incorrect type of batteries Do not try to replace the battery yourself. There is a risk of explosion if the incorrect battery type is used. Switch the device on or off using the power switch before removing the power supply from the socket. Turn off the device and remove it from the power supply before cleaning the surface. Use a soft, lint-free cloth. Never use liquid, gaseous or easily flammable cleansers (sprays, abrasives, polishes, alcohol). Do not allow any moisture to reach the interior of the device. DANGER! High Power LED This device is equipped with an high power LED (Light Emitting Diode), which emits very bright light. Do not look directly into the projector lens. This could cause eye irritation or damage. DANGER! Danger of hearing damage Do not use the device over a longer time at high volume – especially when using headphones. This could lead to the risks of hearing damage. Philips · PPX 4350 PPX4350_UM_EN_253xxxxxx.book Page 5 Mardi, 16. septembre 2014 12:52 12 Repairs Do not repair the device yourself. Improper maintenance can result in injuries or damage to the device. Your device must be repaired by an authorised service centre. Find details of authorised service centres on the warranty card. Do not remove the type label from your device; this would void the warranty. General Safety Information PPX4350_UM_EN_253xxxxxx.book Page 6 Mardi, 16. septembre 2014 12:52 12 2 Overview Top of the Device Side View 1 – USB cable USB connection for a computer / port for power supply USB connection for a USB storage medium 1 – Loudspeak (on the other side) 2 – – HDMI port for a playback device (with adapter cable) 3 – – Memory card slot (Micro SD/ SDHC/SDXC) 4 – à – On/Off switch 5 – Ï – Audio output – headphone connection or connection for external speakers 6 – Battery status monitor Charge indicator with connected power supply: Red: Charging battery Green: battery is fully charged 2 – Focus wheel for image sharpness. Notice Note that the distance to the projection surface must be a minimum of 0.3 meters and a maximum of 2.1 meters. If the Pocket Projector is located outside of this range, it will not be possible to focus the image. Turn the focus wheel carefully so as to avoid damaging the lens. 3 – OK key à–Confirm entry / start, stop video/music playback or slideshow. 4 – Navigation keys / – Navigating / during music playback select previous, next title when image display is switched off / during video/picture playback wake Quick setting bar. À/Á – Navigating / during music playback: adjust volume level / during video playback start forward or backward / during picture playback select previous, next picture 5– Bottom of the Device 1 – Tripod socket keys – One menu step back, one directory level back / cancelling a function Philips · PPX 4350 PPX4350_UM_EN_253xxxxxx.book Page 7 Mardi, 16. septembre 2014 12:52 12 Overview of the Menu Functions Symbols in the Statusbar 12 3 45 6 1 After switching on the device the main menu appears. 2 Select the desired menu using the navigation keys /, À/Á. 3 Confirm with à. 4 By pressing the key you will return to the main menu. Videos Source Pictures Folder View Music Settings 1 – WLAN status display 2 – Mode ECO 3 – Folder 4 – USB storage medium 5 – Bluetooth 6 – Charge level of the internal battery. The icon will be red, when the battery needs to be recharged. Source – Switch to the external video input HDMI or select WiFi (if WiFi dongle connected) Videos – Selecting files for video playback Pictures – Selecting files for the slideshow Music – Selecting music files for playback Settings – Access + and configure settings the Pocket Projector Folder View – Selecting files for Playback. Copy or Delete Files (Mark the files with Á and confirm using à). Overview PPX4350_UM_EN_253xxxxxx.book Page 8 Mardi, 16. septembre 2014 12:52 12 3 Initial Operation Setting up the Device Initial Installation A tripod accessory is available if you can to elevate the device. 1 Switch the device on using the on/off switch on the side. 2 Turn the device towards a suitable projection surface or wall. Note that the distance to the projection surface must be a minimum of 0.3 meters and a maximum of 2.1 meters. Make sure the projector is in a secure position. 3 Use the focus wheel on the top to adjust the image sharpness. 4 Select the desired menu language using /. 5 Confirm with à. Connect Power Supply / Charge Battery CAUTION! Mains Voltage at the Site of Installation! Check whether the mains voltage of the power supply matches the mains voltage available at the setup location. 1 Connect the USB plug to a computer, to charge the battery. Alternatively you may connect the USB plug to the power adapter (not included), we recommend using the accessory PPA6200. Charge time is faster for to charge the battery (XX hour/minutes). Notice The Main Menu Appears Instead of the Language Selection The device has already been installed. In order to change the menu language, proceed as follows: 1 Use the navigation keys to select Settings. 2 Confirm with à. 3 Select with / Language. 4 Confirm with à. 5 Select the desired language with /. 6 Confirm with à. 7 Exit with Philips · PPX 4350 PPX4350_UM_EN_253xxxxxx.book Page 9 Mardi, 16. septembre 2014 12:52 12 4 + functions Functions are available for you to use your projector as a pocket flashlight, emitting a flash or a SOS bright. CAUTION! These functions use a lot of energy, make sure your battery is charged before using them. The SOS light can not be seen as an emergency beacon. Flashlight Allows to use the Pocket Projector as a flashlight. Warning light Your Pocket Projector can emit a flash of red or orange. This flash can be seen more than 50 meters. 1 Switch the device on using the on/ off on the side. 2 After the initial screen the main menu appears. 3 Use the navigation keys to select Settings. 4 Confirm with à. 5 Use the navigation keys to select Warning light. 6 Confirm with à. 7 The flashlight is activated. 8 For stop, press 1 Switch the device on using the on/ off on the side. 2 After the initial screen the main menu appears. 3 Use the navigation keys to select Settings. 4 Confirm with à. 5 Use the navigation keys to select Flashlight. 6 Confirm with à. 7 The flashlight is activated. 8 For stop, press or 1 Switch the device on using the on/off on the side. 2 After the initial screen the main menu appears. 3 Press during two seconds 4 The flashlight is activated 5 For stop, press SOS light Your Pocket Projector is equipped with an SOS light function. The flashes are issued according to the rule Morse 3 short, 3 long, 3 short. Your equipment can not be considered a rescue beacon approved. Switch the device on using the on/off on the side. After the initial screen the main menu appears. Use the navigation keys to select Settings. Confirm with à. Use the navigation keys to select SOS. Confirm with à. The flashlight is activated. For stop, press + functions PPX4350_UM_EN_253xxxxxx.book Page 10 Mardi, 16. septembre 2014 12:52 12 5 Connect to the Playback Device Only use the supplied cable or cables that are available as accessories to connect the projector. Cables available as accessories Mini Display port cable ............. (PPA1270 / 253xxxxxx) MHL cable .................................... (PPA1240 / 253520048) Connecting to Devices with HDMI Output Use the HDMI to mini HDMI cable to connect the projector to a computer or laptop. Connecting the headphones Notice Switching to the Multimedia Device Signal Output See the multimedia device instruction manual to find out how to switch the signal output to this jack. 1 Before connecting the headphones, turn down the volume on the device. 2 Connect the headphones to the projector's headphone slot. The device speakers deactivate automatically when the headphones are connected. 1 Switch the device on using the on/off switch on the side. 2 After the initial screen the main menu appears. 3 After connecting the headphones, increase the volume to a comfortable level. Videos Source Pictures DANGER! Folder View Music Settings 3 Connect the HDMI cable to the projector's HDMI socket. 4 Connect the cable to the mini-HDMI socket of the playback device. 5 Use the navigation keys to select Source. 6 Confirm with à. 7 Use the navigation keys to select MHL/HDMI. 8 Confirm with à. 9 The connection is activated. Danger of Hearing Damage Do not use the device over a longer time at high volume – especially when using headphones. This could lead to the risks of hearing damage. Before connecting the headphones, turn down the volume on the device. After connecting the headphones, increase the volume to a comfortable level. Décrire connexion avec hdmi iOS devices (with HDMI) Android devices with MHL cable 10 Philips · PPX 4350 PPX4350_UM_EN_253xxxxxx.book Page 11 Mardi, 16. septembre 2014 12:52 12 6 Memory Inserting a Memory Card 1 Insert a memory card with the contacts facing downwards into the slot at the side of the device. Your device supports the following memory cards: Micro SD/SDHC/SDXC. 2 Insert the memory card into the slot until it snaps into position. DANGER! Connecting USB Storage Medium 1 Connect the USB storage medium to the USB cable of the device. describe here how to connect iOS and Android devices. Inserting a Memory Card! Never pull out the memory card while the device is accessing it. This could cause data to be damaged or lost. Switch the device off in order to make sure that the device does not access the memory card. 3 Press lightly on the memory card to remove it. 4 The memory card is ejected. Memory 11 PPX4350_UM_EN_253xxxxxx.book Page 12 Mardi, 16. septembre 2014 12:52 12 7 Miracast function to do 12 Philips · PPX 4350 PPX4350_UM_EN_253xxxxxx.book Page 13 Mardi, 16. septembre 2014 12:52 12 8 Bluetooth Activating the Bluetooth connection 1 Switch the device on using the on/off switch on the side. 2 After the initial screen the main menu appears. 9 Modify the desired settings. Menu Description Select device The list shows all paired devices. Paired device To unconnect or unpair the paired device. to finish settings and possibilities with bluetooth. Videos Source Pictures Folder View Music Settings 3 Use the navigation keys to select Settings. 4 Confirm with à. 5 Use the navigation keys to select Bluetooth. 6 Confirm with à. 7 Use / to select On. 8 Confirm with à. The projector is now visible for the near external Bluetooth devices. Setting up Bluetooth parameters 1 Switch the device on using the on/off switch on the side. 2 After the initial screen the main menu appears. Videos Source Pictures Folder View Music Settings Use the navigation keys to select Settings. Confirm with à. Use the navigation keys to select Bluetooth. Confirm with à. Using / select the desired setting. Confirm with à. Bluetooth 13 PPX4350_UM_EN_253xxxxxx.book Page 14 Mardi, 16. septembre 2014 12:52 12 9 Media Playback File Format Notice Best Settings for Optimal Use Read the informations on the best settings in the chapter settings (see also Settings, page 17) for optimal use of your device. Video playback Video Playback (USB / MICRO SD / Internal Memory) Switch the device on using the on/off on the side. After the initial screen the main menu appears. Use the navigation keys to select Videos. Confirm with à. With connected memory: Using the keys / select the internal memory, the USB storage medium or the memory card. 6 Confirm with à. 7 Use / to select the video file that you wish to play. Notice Displaying Video Files Only those videos that are compatible with the Pocket Projector will be displayed. 8 Press à to start playback. 9 Press to end the playback and return to the overview. 10 When you press again, you will return to the main menu. During playback you can adjust the volume using À/ Á. 14 There are various video file formats as *.mov, *.avi, *.m4v. Many of these formats function as a container that contains the various encoded audio and video files. MPEG-4, H.264, MP3, and AAC are all examples of encoded audio/video files. In order to play these files, the projector must read them and decode the audio/ video signals. Please note that some files cannot be played as a result of different video and audio encoders. Supported file formats Container Video format *.avi XVID; MPEG-4; H.264; MJPEG *.mov MPEG-4; H.264;H.263 *.mp4 MPEG-4; H.264;H.263 *.mkv XVID; MPEG-4; H.264; MJPEG *.flv NO *.ts H.264 *.m2ts H.264 *.swf NO *.3gp H.263 *. lvr MPEG-4; H.264;H.263 Video Playback (Mini-HDMI Socket) 1 Connect the audio/video output of the external device to the Pocket Projector's socket. Use the corresponding cable and cable adapter for this purpose (see also Connect to the Playback Device, page 10). 2 To find out how to deactivate the video output for the external device, please see the relevant instruction manual. Most often, this option is labelled "TV out" or "TV Output" in the corresponding menu. 3 Start the video playback on the external device. 4 Modify the volume with À/Á. Philips · PPX 4350 PPX4350_UM_EN_253xxxxxx.book Page 15 Mardi, 16. septembre 2014 12:52 12 Modify settings during playback 1 Press the or key. 2 Use the / keys to choose from the following settings: Volume: Adjust volume level Smart Settings: Select predefined settings for brightness / contrast / colour saturation Saturation: Adjust colour saturation Contrast: Adjust contrast Brightness: Adjust brightness 3 Modify the setting using À/Á. The device saves the modified settings automatically. Photo Playback 1 Switch the device on using the on/off switch on the side. 2 After the initial screen the main menu appears. 3 Use the navigation keys to select Pictures. 4 Confirm with à. 5 With connected memory: Using the keys / select the internal memory, the USB storage medium or the memory card. 6 Confirm with à. 7 Thumbnail photos are displayed on the screen as an overview. Notice Thumbnail or List In the settings, you are able to select whether the overview will be displayed as miniatures or in a list. Notice Many Photos on the Memory Card or the USB Medium If there are a lot of photos on the memory card or the USB storage medium it can take a moment before the overview appears. 8 Use À/Á or / to select the image that you want to start the slide show with. 9 Press à to start the slide show. 10 Press à to pause the slide show. 11 Press to end the slide show and return to the overview. 12 When you press again, you will return to the main menu. 3 Using À/Á select Music. 4 Confirm with à. 5 Use / to select the file that you wish to play. Notice Storage Location Only files from the internal memory/Memory Card/USB Storage Medium can be played. 6 To start the background sound confirm with à. 7 Press À/Á to adjust the volume level. 8 If no input is made, the menu bar is hidden after 5 seconds. Music Playback Notice Switch off the Image Playback You can turn off image playback while playing music in order to save power (see also Music settings, page 17). As soon as you press the key, the image reappears and the fan starts again. 1 Switch the device on using the on/off switch on the side. 2 After the initial screen the main menu appears. 3 Use the navigation keys to select Music. 4 Confirm with à. 5 With connected memory: Using the keys / select the internal memory, the USB storage medium or the memory card. 6 Confirm with à. 7 Use / to select the file that you wish to play. 8 Press à to start playback. 9 Press à to stop or continue playback. Notice Navigating when Image Playback is Switched off Press / to skip to the previous or next song. Press à to stop or continue playback. Press to return to the selection. During playback you can adjust the volume using À/ Á key. Slide Show with Background Sound 1 Start the slideshow. 2 Press /, to open the menu bar. Media Playback 15 PPX4350_UM_EN_253xxxxxx.book Page 16 Mardi, 16. septembre 2014 12:52 12 Managing Files Notice Error If errors occur during the copying process, make sure that enough free space is available on the medium. Removing Storage Medium Only remove the storage medium after the copy process is complete. Copy Files You can copy files back and forth from the internal memory to the connected USB storage medium or memory card. 1 Switch the device on using the on/off switch on the side. 2 After the initial screen the main menu appears. 3 Use the navigation keys to select Folder View. 4 Confirm with à. 5 With an inserted memory card or USB storage device: Select the internal memory, the USB storage medium or the memory card using the keys /. 6 Confirm with à. 7 Use / to select the file that you want to copy. Notice No Files Found (0 files) Only those files that are compatible with the Projector will be displayed. 8 Mark the file using Á. Pressing the key again deselects the chose file(s). Delete Files You can delete files from the internal memory, the connected USB storage medium or the memory card. 1 Switch the device on using the on/off switch on the side. 2 After the initial screen the main menu appears. 3 Use the navigation keys to select Folder View. 4 Confirm with à. 5 With connected memory: Using the keys / select the internal memory, the USB storage medium or the memory card. 6 Confirm with à. 7 Use / to select the file that you want to delete. Notice No Files Found (0 files) Only those files that are compatible with the Projector will be displayed. Notice Mark the Entire Folder You can also mark an entire folder to copy all files from the folder. Note that the copy process of large folders can takes some time. 9 Use / to select other files. 10 Press à. 11 Select with / Copy. 12 Confirm with à. 13 Use / to select the destination memory: SD card, internal memory or USB storage medium. 14 Confirm with à. Notice Files Already Exist If the files you are copying already exist in the target folder, you must choose whether or not you want to overwrite them using / and à. If you choose not to overwrite these files, copies will be created. The copies can be recognised by a number added to the file names. 15 The files are copied. 16 8 Mark the file using Á. Pressing the key again deselects the chose file(s). 9 Use / to select other files. 10 Press à. 11 Select with / Delete. 12 Confirm with à. 13 Use / if you want to delete the files or cancel the deletion process. 14 Confirm with à. Notice Error If errors occur during the deletion process, make sure that the storage medium is not write-protected. Deleting Photos on the Memory Card When deleting photos via the computer, note that the photos may not be correctly displayed when the memory card is inserted into the digital camera again. Digital cameras sometimes store additional information in specific folders, including previews and orientation information. For this reason, only delete the photos using the digital camera. Philips · PPX 4350 PPX4350_UM_EN_253xxxxxx.book Page 17 Mardi, 16. septembre 2014 12:52 12 10 Settings 1 Switch the device on using the on/off switch on the side. 2 After the initial screen the main menu appears. 3 Use the navigation keys to select Settings. 4 Confirm with à. 5 Use / to select from the following settings. 6 Confirm with à. 7 Modify the settings using à, /, 8 Confirm with à. The key takes you one step back in the menu. Overview of the Menu Functions Image settings Wall paper – Select background images Fit Screen – Convert videos and images to Original, Optimal or 16:9 resolution Projection mode Front – Normal projection; the device is located in front of the projection surface/screen Rear – Rear projection; the device is located behind the projection surface; the image is reflected horizontally. Rear ceiling – The device is located behind the projection surface, hanging from the ceiling in an upside-down position; the image is rotated through 180 degrees and reflected horizontally. Ceiling – The device is hanging from the ceiling in an upside-down position; the image is rotated through 180 degrees. Wall color correction – Colour correction of the projected image to adjust to coloured projection surfaces Smart Settings – Select predefined settings for brightness / contrast / colour saturation. If you modify these settings, the setting is switched to Standard. Brightness – Adjust brightness Contrast – Adjust contrast Saturation - Adjust saturation Sound Settings: Volume – Adjust the volume Bass – Set the playback of the low frequencies Treble – Set the playback of the high frequencies Key beep – Turn key tones on and off Video settings View – Display all videos in a list or a corresponding folder structure on the drive. Repeat – Set the repeat type for video files: Repeat deactivated (Off), repeat all videos in a directory (Directory), repeat only the current video (Movie), repeat all videos (All). Settings Resume play – If this function is activated, playback will continue at the position it was last stopped. If deactivated, playback will always start at the beginning of the video. Music settings View – Show all tracks in a list or a corresponding folder structure on the drive. Screen – Activate or deactivate the projection during playback. Repeat – Set the repeat type for music files: Repeat deactivated (Off), repeat all songs in a directory (Directory), repeat only the current song (Song), repeat all songs (All). Shuffle – Activate this function for random playback. Otherwise, playback will take place in sequence. Picture settings View – Display the images as a thumbnail or as a list during selection in the main menu. Time per slide – Image viewing time during slide show Repeat – Set the type of repeat for slide show photos: Repeat off (Off), repeat all photos in the directory (Directory), repeat all stored photos (All). Slide transition – Set image transitions Slideshow order – Play slide show in order or randomly Power Save Brightness mode – This function reduces the light output in order to increase the operating time for the built-in battery. When operating from the power supply, the energy saving mode is always deactivated in order to ensure the best-possible image display. Sleep mode – With this function, the projector automatically shuts down after a specified period of time or at the end of a movie. Auto demo mode – Switching demo mode on and off. In this mode, Pocket Projector is continuously displayed on the screen and video and/or audio files placed in internal memory are read directly. Bluetooth – Enables the function and select the Bluetooth device. Language – Select the desired language for the menu. Maintenance Reset settings – Reset settings to factory defaults. Firmware Update – Update Firmware Notice Connect for the duration of the firmware update the power adapter. Information – Display free space in the internal memory and information on the device (Capacity: / Free space: / Firmware version: / Device name: / Model:) 17 PPX4350_UM_EN_253xxxxxx.book Page 18 Mardi, 16. septembre 2014 12:52 12 11 Service Care Instructions for the Battery The capacity of the battery diminishes with time. You can prolong the life of the battery if you observe the following points: • Without a power supply, the device operates from the built-in battery. When the battery does not have sufficient capacity, the device turns off. Connect the device to the power supply. • When the battery does not have sufficient capacity, the battery symbol in the display and turns red. • When the device is running for a long period of time, the surface becomes hot and a warning symbol appears on the projection. The device behaves as follows: 1 The fan turns to maximum level. 2 At maximum level of brightness the overheat symbol appears in the status bar and the device turns automatically to minimum level of brightness. 3 At minimal level of brightness the overheat symbol shows for three seconds in the middle of the screen. Then the device turns off automatically. After the device has cooled down, you can continue playback. • Use the device at least once a week. • Charge the battery regularly. Don’t store the device with a completely discharged battery. • If the device is not used for several weeks, discharge the battery a little by using the device before storing it. • If the device only works using the USB connection or with the power supply, the battery is defective. • Keep the device and the battery away from sources of heat. Battery deep discharge When the battery is in deep discharge or the device is not used for a longer period, proceed as followed: 1 Connect the device to the power supply (see also Connect Power Supply / Charge Battery, page 8). The device behaves as follows: Device off Device on Connect to a computer The indicator light on the side of the device turns red. Slow charging Connect to a computer No charging Connect to the power adapter The indicator light on the side of the device turns red. Fast charging Device remains turned on. Slow charging 2 The device can be turned on and is ready to use after approximately five minutes of charging time. Battery recharge time with device off Turning on possible Completely charged Slow charging 5 minutes 10 hours Fast charging 5 minutes 2 hours DANGER! Do not Replace the Battery Yourself Do not try to replace the battery yourself. Incorrect handling of the battery or using the wrong type of battery can cause damage to the device or cause injury. 18 Philips · PPX 4350 PPX4350_UM_EN_253xxxxxx.book Page 19 Mardi, 16. septembre 2014 12:52 12 Cleaning DANGER! Instructions for Cleaning! Use a soft, lint-free cloth. Never use liquid or easily flammable cleansers (sprays, abrasives, polishes, alcohol, etc.). Do not allow any moisture to reach the interior of the device. Do not spray the device with any cleaning fluids. Wipe over the surfaces gently. Be careful that you do not scratch the surfaces. Update Firmware with Memory Card Notice Connect for the duration of the firmware update the power adapter (see also Connect Power Supply / Charge Battery, page 8). 1 Format the memory card in the file system FAT16 or FAT32. DANGER! All Data will be Deleted! This procedure erases all your data that is stored on the memory card. Cleaning the Lens Use a brush or lens cleaning paper for cleaning the lens of the projector. DANGER! Do not use any Liquid Cleaning Agents Do not use any liquid cleaning agents for cleaning the lens, to avoid damaging the coating film on the lens. Device Overheated A overheat symbol appears if the device is overheated (see also Symbols in the Statusbar, page 7). The device behaves as follows: 1 The fan turns to maximum level. 2 At maximum level of brightness the symbol appears in the status bar and the device turns automatically to minimum level of brightness. 3 At minimal level of brightness the symbol shows for three seconds in the middle of the screen. Then the device turns off automatically. After the device has cooled down, you can continue playback. 2 Save the latest firmware update file to the memory card. 3 Insert the memory card (see also Inserting a Memory Card, page 11) and switch the device on. 4 Use the navigation keys to select Settings. 5 Confirm with à. 6 Use / to select Maintenance. 7 Confirm with à. 8 Use / to select Firmware Update. 9 Confirm with à. 10 Use / to select Yes. 11 Confirm with à. 12 The device turns off and on again. After around 5 minutes the Language Selection screen appears. The firmware update is now completed. DANGER! Inserting a Memory Card! Never pull out the memory card while the device is accessing it. This could cause data to be damaged or lost. DANGER! Power! Do nut unplug the power adapter during the firmware update. Notice If an error occurs during the firmware update process retry the procedure or contact your dealer. Service 19 PPX4350_UM_EN_253xxxxxx.book Page 20 Mardi, 16. septembre 2014 12:52 12 Troubleshooting 1 Switch the device off using the on/off switch on the side. 2 Wait at least ten seconds. 3 Switch the device on using the on/off switch on the side. 4 If the problem repeats, please contact our technical customer service or your retailer. Power Cycling If a problem occurs that cannot be corrected with the instructions in this user manual (see also the help below), follow the steps given here. Problems Solutions The Pocket Projector is unresponsive or hung up • Insert a slim, pointy object into the reset hole to trigger a hardware reset (see also Overview of the Menu Functions, page 7) The Pocket Projector cannot be switched on • Connect the supplied power supply to recharge the internal battery. No sound • Adjust the volume using the À/Á key. No sound from the external connected device • • • Check the cables to the external device Set the volume on the external device Only the original cables from the device manufacturer may function Bad sound quality with your computer connection • Check if the audio cable is connected to the computers headphone socket or the line-out socket. The volume setting on the computer should not be too high. • Only the initial screen appears and not the image from the external device • • • Only the initial screen appears and not the image from the connected computer • • Device switches turns off • • The device is connected to the power supply and switches to stand-by mode 20 • Check if the cables are connected to the right sockets. Please check that the external device is switched on Check if the video output of the external device is switched on. Please check that the VGA-output of the computer is switched on. Check if the resolution of the computer is set to 800x600. When the device is running for a long period of time, the surface becomes hot and a warning symbol appears on the projection, see also symbols in the statusbar. The device automatically turns off when it gets too hot. After the device has cooled down, you can continue playback. When the battery does not have sufficient capacity, the device turns off. Connect the device to the power supply. The battery is in deep discharge. The device can be turned on and is ready to use after approximately five minutes of charging time (see also Battery deep discharge, page 18). Philips · PPX 4350 PPX4350_UM_EN_253xxxxxx.book Page 21 Mardi, 16. septembre 2014 12:52 12 Problems Solutions Devices changes from maximum level of brightness to • minimum level of brightness when the device is connected over USB to play videos. • Bad image or color quality when connecting with HDMI • Service When the environment temperature is too high, the devices turns automatically from maximum level of brightness to minimum level of brightness in order to protect the high power LED. Use the device with lower environment temperatures. Use the supplied HDMI cable (PPA1290). Thirdparty cables may cause signal distortions. 21 PPX4350_UM_EN_253xxxxxx.book Page 22 Mardi, 16. septembre 2014 12:52 12 12 Appendix Technical Data Accessories Dimensions (L¦×¦H¦×¦W)........................ 97 x 17 x 54 ¦mm Weight ............................................................................ 120 g Recommended Ambient........................................5¦–¦35¦ºC Relative Humidity ..................15¦–¦85¦% (non-condensing) File format................... *.mp4, *.avi, *.mov, *.mkv, *.mpg, ..................................*.mpeg, *.flv, *.ts, *.m2ts, *.3gp Photo formats ................................. JPEG, BMP, PNG, GIF Music formats........................................MP3, WAV, WMA Video Standard (CVBS)................... PAL, SECAM, NTSC Video Standard (YPbPr)....480i/p, 576i/p, 720p, 1080i/p Video connection ................................. Mini-HDMI socket Headphone connection..........Stereo - jack plug: 3,5¦mm Internal speaker ...................................................mono 1¦W Internal memory.............................................................4¦GB Compatible Memory Cards ..... Micro SD/SDHC/SDXC USB connection max. power .........................5V, 500mA Technology / optical Display technology ..................................WVGA 0,2" DLP Light source ........................................................... RGB LED Resolution ......................................................640¦x¦360¦Pixel Supported Resolutions..................... VGA/SVGA/WVGA ..............................................XGA/WXGA/FULL HD Brightness (Bright Mode)..................... up to XXX lumen Contrast ratio .............................................................1300:1 Projected image size ..........................................10¦–¦60¦inch Screen distance ................................... 0,35¦m up to 2.12¦m Focus ............................................................................ Manual Focus length.................................................................10.6 m Built-in rechargeable battery Battery type .................................................................... LiPol Capacity ........................................................ XXX mAh X V Charging time.................................................................... X¦h Operating time.................................................................. X¦h Operating time (ECO mode) ........................................ X¦h Manufacturer ......................................................... xxxxxxxx Following accessories are available for your device: 22 Mini HDMI-HDMI cable ........ PPAXXXX / 253xxxxxx MHL cable ................................ PPAXXXX / 253xxxxxx Power adaptor ........................ PPA6200EU / 253456003 ........................................... PPA6200UK / 253461710 ............................................ PPA6200US / 253495638 All data are provided for reference purposes only. Sagemcom Documents SAS reserves the right to make any changes without prior notice. Philips · PPX 4350 PPX4350_UM_EN_253xxxxxx.book Page 23 Mardi, 16. septembre 2014 12:52 12 The CE marking certifies that the product meets the main requirements of the European Parliament and Council directives 1999/5/CE, 2006/95/CE, 2004/108/ CE and 2009/125/CE on information technology equipment, regarding safety and health of users and regarding electromagnetic interference. The declaration of compliance can be consulted on the site www.picopix.philips.com. Preservation of the environment as part of a sustainable development plan is an essential concern of Sagemcom Documents SAS. The desire of Sagemcom Documents SAS is to operate systems observing the environment. The desire of Sagemcom Documents SAS is to operate systems observing the environment and consequently it has decided to integrate environmental performances in the life cycle of this products, from manufacturing to commissioning use and elimination. Packaging: The presence of the logo (green dot) means that a contribution is paid to an approved national organisation to improve package recovery and recycling infrastructures. Please respect the sorting rules set up locally for this kind of waste. Batteries: If your product contains batteries, they must be disposed of at an appropriate collection point. their respective owners. Sagemcom Documents SAS disclaims any and all rights in those marks. Neither Sagemcom Documents SAS nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by the purchaser or third parties as a result of accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or failure to strictly comply with Sagemcom Documents SAS operating and maintenance instructions. Sagemcom Documents SAS shall not be liable for any damages or problems arising from the use of any options or any consumable materials other than those designated as original Sagemcom Documents SAS / PHILIPS products or Sagemcom Documents SAS / PHILIPS approved products. Sagemcom Documents SAS shall not be held liable for any damage resulting from electromagnetic interference that occurs from the use of any interface cables other than those designated as Sagemcom Documents SAS / PHILIPS products. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Sagemcom Documents SAS. The information contained herein is designed only for use with this product. Sagemcom Documents SAS is not responsible for any use of this information as applied to other devices. This user manual is a document that does not represent a contract. Errors, printing errors and changes are reserved. Copyright È 2014 Sagemcom Documents SAS Product: The crossed-out waste bin stuck on the product means that the product belongs to the family of electrical and electronic equipment. In this respect, the European regulations ask you to dispose of it selectively; • At sales points in the event of the purchase of similar equipment. • At the collection points made available to you locally(drop-off centre, selective collection, etc.). In this way you can participate in the re-use and upgrading of Electrical and Electronic Equipment Waste, which can have an effect on the environment and human health. The paper and cardboard packaging used can be disposed of as recyclable paper. Have the plastic wrapping recycled or dispose of it in the non-recyclable waste, depending on the requirements in your country. Trademarks: The mentioned references in this manual are trademarks of the respective companies. The lack of the trademarks É and Ë does not justify the assumption that these dedicated terminologies are free trademarks. Other product names used herein are for identification purposes only and may be trademarks of Appendix 23 PPX4350_UM_EN_253xxxxxx.book Page 24 Mardi, 16. septembre 2014 12:52 12 PHILIPS and the PHILIPS’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used by Sagemcom Documents SAS under license from Koninklijke Philips N.V. È 2014 Sagemcom Documents SAS All rights reserved Sagemcom Documents SAS Documents Business Unit Headquarters : 250, route de l’Empereur 92848 Rueil-Malmaison Cedex · FRANCE Tel: +33 (0)1 57 61 10 00 · Fax: +33 (0)1 57 61 10 01 www.sagemcom.com Simplified Joint Stock Company · Capital 8.479.978 € · 509 448 841 RCS Nanterre PPX 4350 EN 253XXXXXX
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Format : application/pdf Title : PPX4350_UM_EN_253xxxxxx.book Creator : g092899 Create Date : 2014:09:16 09:05:13Z Creator Tool : FrameMaker 10.0.2 Modify Date : 2014:09:16 09:05:13Z Producer : Acrobat Distiller 11.0 (Windows) Document ID : uuid:22f0b052-530d-4fe6-9672-6c26a44dc626 Instance ID : uuid:2ad158a2-8bde-4a5d-a550-1beb2e36b33b Page Mode : UseOutlines Page Count : 24 Author : g092899EXIF Metadata provided by EXIF.tools