SAM JIN IM6001-BTP01 Button User Manual IOT QSG HSG ai

Download:
Mirror Download [FCC.gov]
Document ID	3814898
Application ID	dKrWOtKYVUBzP/hJ5gKw0A==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	20.45kB (255563 bits)
Date Submitted	2018-04-12 00:00:00
Date Available	2018-04-12 00:00:00
Creation Date	2018-03-23 18:52:02
Producing Software	Acrobat Distiller 11.0 (Windows)
Document Lastmod	2018-04-11 17:37:48
Document Title	IOT QSG&HSG.ai
Document Creator	PScript5.dll Version 5.2.2
Document Author:	user

Button QSG
Front
Welcome to your
Button
Back
Setup
1.
Make sure the Button is within
15 feet (4.5 meters) of your
SmartThings Hub or SmartThings
Wifi (or compatible device with
SmartThings Hub functionality)
during setup.
2.
Use the SmartThings mobile app to
select the “Add device” card and
then select the “Button” category.
Placement
Troubleshooting
The Button can control any connected
devices at a touch of a Button.
1.
Hold the “Connect” button with a
paperclip or similar tool for 5
seconds, and release it when the
LED starts blinking red.
2.
Use the SmartThings mobile app to
select “Add device” card and then
follow the on-screen instructions to
complete setup.
Simply place the Button on the table,
desk, or any magnetic mating surface.
The Button can also monitor
temperature.
Revised 05/18. Copyright 2018.
SmartThings, Inc. All rights reserved.
3.
Remove the tab on the Button
marked “Remove When Connecting”
and follow the on screen instructions
in the SmartThings app to complete
setup.
Connect button
If you’re still having trouble connecting
the Button, please visit
Support.SmartThings.com for assistance.
•
Safety Instructions
•
•
•
•
•
•
Read, keep, and follow these instructions. Heed all warnings.
The SmartThings Water Leak Sensor is water-resistant but not
water-proof; avoid submerging it in water or liquid to keep interior
dry and to protect batteries. All other SmartThings products should
not be used near water or exposed to dripping or splashing of any
water or liquid.
Clean only with a dry cloth.
Do not install near any heat sources such as radiators, heat registers,
Read our Product Usage Guidelines at:
www.SmartThings.com/Guidelines.
Safety Instructions: Hub
Disconnect the network cable and power adapter or any other connected
peripherals if any of the following conditions exist:
•
•
•
The power cord or connector is damaged or frayed.
You want to clean the Hub (see Important Safety Instructions).
excessive moisture.
FCC Statement
The Hub power adapter is damaged or has been dropped and you
suspect it needs to be serviced.
Avoid installing the SmartThings Hub
near or inside sources of metal, radio
or electromagnetic interference.
WARNING: No user-serviceable parts inside. Refer all
IMPORTANT CONSUMER INFORMATION: Please read
before activating or using the device.
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
Disclaimer
Some content and services accessible through this device belong to third
parties and are protected by copyright, patent, trademark and/or other
intellectual property laws. Such content and services are provided solely
for your personal non-commercial use.
You may not use any content or services in a manner that has not been
authorised by the content owner or service provider. Without limiting the
foregoing, unless expressly authorised by the applicable content owner
or service provider, you may not modify, copy, republish, upload, post,
transmit, translate, sell, create derivative works, exploit, or distribute in
any manner or medium any content or services displayed through this
device.
This device complies with Part 15 of the FCC rules. Operation is subject to
the following conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation.
Tested to Comply With FCC Standards
FOR HOME OR OFFICE USE
Multipurpose Sensor
Outlet
Manufacturer Model : IM6001-MPP01
FCC ID : 2AF4S-IM6001-MPP01
IC : 20753-IM6001MPP01
Manufacturer Model : IM6001-OTP01
FCC ID : 2AF4S-IM6001-OTP01
IC : 20753-IM6001OTP01
Motion Sensor
Manufacturer Model : IM6001-MTP01
FCC ID : 2AF4S-IM6001-MTP01
IC : 20753-IM6001MTP01
Button
Manufacturer Model : IM6001-BTP01
FCC ID : 2AF4S-IM6001-BTP01
IC : 20753-IM6001BTP01
Water Leak Sensor
Manufacturer Model : IM6001-WLP01
FCC ID : 2AF4S-IM6001-WLP01
IC : 20753-IM6001WLP01
FCC Caution
responsible for compliance could void the user’s authority to operate this
equipment.
Important Note: FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for
an uncontrolled environment. This equipment should be installed and
operated with minimum distance 20cm between the radiator & your body.
Canada Statement
This device complies with RSS-247 of the Industry Canada Rules.
Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired
operation.
Ce dispositif est conforme à la norme CNR-247 d’Industrie Canada
applicable aux appareils radio exempts de licence. Son fonctionnement
est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas
produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout
brouillage reçu, y compris un brouillage susceptible de provoquer un
fonctionnement indésirable.
Important Note for mobile device use Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for
an uncontrolled environment. This equipment should be installed and
operated with minimum distance 20cm between the radiator & your body.
Note Importante pour l’utilisation de dispositifs mobiles
Déclaration d’exposition aux radiations: Cet équipement est conforme aux
limites d’exposition aux rayonnements IC établies pour un environnement
non contrôlé. Cet équipement doit être installé et utilisé avec un
minimum de 20 cm de distance entre la source de rayonnement et
votre corps.
Information to the User
Correct disposal of batteries in this product
One (1) Year Limited Warranty
could void your authority to operate the equipment.
(Waste Electrical & Electronic Equipment)
(Applicable in countries with separate collection systems)
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation.
This marking on the product, accessories or literature indicates that the
product, its electronic accessories (e.g. charger, headset, USB cable), and
batteries should not be disposed of with other household waste.
SAMJIN, Inc. warrants this product (the “Product”) against defects
in materials and/or workmanship under normal use for a period of ONE
(1) YEAR from the date of purchase by the original purchaser (“Warranty
Period”). If a defect arises and a valid claim is received within the
Warranty Period, then as your sole remedy (and SAMJIN’ sole
liability), SAMJIN will at its option either 1) repair the defect at no
charge, using new or refurbished replacement parts, or 2) replace the
Product with a new product that is functionally equivalent to the original,
in each case within 30 days following receipt of the returned Product.
A replacement product or part, assumes the remaining warranty of the
original Product. When a Product or part is exchanged, any replacement
item becomes your property and the replaced Product or part becomes
SAMJIN’ property.
This equipment generates and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of
the following measures:
•
•
•
•
ZigBee networks supporting the Home
Global 2.4 GHz wireless use.
of the ZigBee Alliance.
Reorient or relocate the receiving antenna.
Increase the separation between equipment and the receiver
Connect the equipment to an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
To prevent possible harm to the environment or human health from
uncontrolled waste disposal, please separate these items from other
types of waste and recycle them responsibly to promote the sustainable
reuse of material resources.
Where marked, the chemical symbols Hg, Cd or Pb indicate that the
battery contains mercury, cadmium or lead above the reference levels
in EC Directive 2006/66. If batteries are not properly disposed of, these
substances can cause harm to human health or the environment.
Household users should contact either the retailer where they purchased
how they can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract. This product and its electronic
accessories should not be mixed with other commercial wastes for
disposal.
Obtaining Service: Please contact directly the reseller of this product
where you bought in your local area or service agent of reseller.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : user
Create Date                     : 2018:03:23 18:52:02+09:00
Modify Date                     : 2018:04:11 17:37:48+09:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.4-c006 80.159825, 2016/09/16-03:31:08
Format                          : application/pdf
Title                           : IOT QSG&HSG.ai
Creator                         : user
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2018:04:11 17:37:48+09:00
Producer                        : Acrobat Distiller 11.0 (Windows)
Document ID                     : uuid:eb37c085-0e90-4947-b4ae-f0b4d56ec338
Instance ID                     : uuid:17bfe9b5-bfd8-4b4d-b6af-e53f961ec53c
Page Count                      : 3

EXIF Metadata provided by EXIF.tools