SAMSUNG DLP Television Manual L0612212

User Manual: SAMSUNG SAMSUNG DLP Television Manual SAMSUNG DLP Television Owner's Manual, SAMSUNG DLP Television installation guides

Open the PDF directly: View PDF PDF.
Page Count: 96

Owner +s _nstr_ c_+o_s
Your New Wide TV ............................................................................................ 6
Replacing the Lamp ................................................................................................ 6
List of Features ....................................................................................................... 8
Accessories ........................................................................................................... 8
Side Panel Buttons.................................................................................................. 9
Side Panel Jacks ................................................................................................... 9
Front Panel LED Indicators ..................................................................................... 10
Rear Panel Jacks .................................................................................................. 11
Remote Control .................................................................................................... 12
Installing Batteries in the Remote Control ..................................................... 13
Connections ..................................................................................................... 16
Connecting VHF and UHF Antennas ....................................................................... 16
Antennas with 300-ohm Flat Twin Leads ..................................................... 16
Antennas with 75-ohm Round Leads ........................................................... 16
Separate VHF and UHF Antennas .............................................................. 17
Connecting Cable TV and VCR.............................................................................. 18
Cable without a Cable Box ....................................................................... 18
Cable with a Cable Box that Descrambles All Channels ............................... 18
Connecting a Cable Converter Box ............................................................ 19
Connecting a Cable Converter Box and a VCR ........................................... 19
Connecting a Camcorder ...................................................................................... 20
Connecting a DVD Player ..................................................................................... 21
Connecting to Y, PB, PR............................................................................. 21
Connecting to Audio and Video Jacks ........................................................ 21
Connecting a DTV Set-Top Box .............................................................................. 22
Connecting to Y, PB, PR............................................................................. 22
Connecting to DVI (Digital Visual Interface) ................................................. 22
Connecting to R, G, B .............................................................................. 23
Connecting to HDMI (High Definition Multimedia Interface) .......................... 23
Operation ........................................................................................................ 26
Turning the TV On and Off .................................................................................... 26
Viewing the Menus and On-Screen Displays ........................................................... 26
Selecting the Menu Language ................................................................................ 27
Selecting the Antenna Input ................................................................................... 27
Memorizing the Channels ..................................................................................... 28
Adding and Erasing Channels ............................................................................... 29
Changing Channels .............................................................................................. 30
Selecting Your Favorite Channels ........................................................................... 31
Scanning the Channels ......................................................................................... 32
Labeling the Channels .......................................................................................... 33
Picture Control ..................................................................................................... 34
Sound Control ..................................................................................................... 36
Setting the Clock .................................................................................................. 38
Setting the Timers ................................................................................................. 39
Viewing an External Signal Source ........................................................................ 41
Assigning Names to External Input Mode ............................................................... 42
Freezing the Current Picture .................................................................................. 43
Remote Control VCR/DVD Buttons.......................................................................... 43
English - 2
Special Features ............................................................................................... 46
Customizing Your Remote Control .......................................................................... 46
Remote Control Codes .......................................................................................... 47
Fine Tuning Channels ........................................................................................... 48
LNA (Low Noise Amplifier) .................................................................................... 49
Selecting the Color Tone ....................................................................................... 50
Changing the Picture Size ..................................................................................... 51
Digital Noise Reduction ........................................................................................ 52
DNle TM (Digital Natural Image engine)_ ........................................................... 53
Setting the My Color Control Mode ........................................................................ 54
Setting the Film Mode ........................................................................................... 56
Viewing Picture-In-Picture....................................................................................... 57
Activating the PIP..................................................................................... 57
Selecting an External Source ..................................................................... 58
Swapping the Sub Picture and Main Picture ................................................ 59
Changing the Size of the Sub Picture ......................................................... 60
Changing the Location of the Sub Picture.................................................... 61
Changing the Channel of the Sub Picture.................................................... 62
Selecting the Sound Source ....................................................................... 63
Setting the SRS TSXT............................................................................................. 64
Choosing a Multi-Channel Sound (MTS) track .......................................................... 65
Auto Volume ........................................................................................................ 66
Enjoying the Sound of External Speakers ................................................................ 67
Using the V-Chip .................................................................................................. 68
Viewing Closed Caption Information ...................................................................... 78
Setting the Blue Screen Mode ................................................................................ 80
Setting The On/Off Melody .................................................................................. 81
Using the Color Weakness Enhancement Feature ..................................................... 82
PC Display ....................................................................................................... 84
Using Your TV as a Computer (PC) Display ............................................................. 84
How to Connect Your PC to the TV............................................................. 84
Setting up Your PC SofNvare (Based on Widows 98) ................................... 85
Display Modes ......................................................................................... 86
Adjusting the Picture Quality ................................................................................. 87
Changing the Picture Position ................................................................................ 88
Adjusting the Picture Quality and Position Automatically ........................................... 89
Initializing the Picture Settings ................................................................................ 90
Changing the Picture Size (PC Mode) ..................................................................... 91
Appendix ......................................................................................................... 94
Troubleshooting ................................................................................................... 94
Cleaning and Maintaining Your TV ........................................................................ 95
Using Your TV in Another Country .......................................................................... 95
Specifications ...................................................................................................... 95
English -3
Rep[adngtheLamp
Why do I need to replace the lamp?
The lamp used in a projection TV has a limited lifespan. For the best screen quality it needs to be
replaced periodically. After replacing the lamp, the screen quality will be bright and clear as new.
When do |need to replace it?
It should be replaced when the screen becomes darker, less clear or when all three LEDson the front
(Timer, Lamp, & Temp.) are flashing.
Check before lamp replacement
1. The lamp must be the same code number and type.
2. The lamp type is indicated on the right side of the TV. It is also indicated on the lamp case.
3. After checking the code number for the lamp, give the code number to the store where you
purchased the TV or to a Samsung Service center.
Caution
1. Replace with the correct code numbered lamp (BP96-OO826A) to avoid damage b the TV.
2. Turn the power off and wait for 30 minutes before replacing the lamp as it will be hot.
3. Do not touch the glass part of the lamp with your bare hands nor insert any foreign object inside
the cover as it may cause poor screen quality, electric shock or fire.
4. Do not place the old lamp near flammable objects or within the reach of children.
When installing the product, make sure to keep it away from
the wall (more than 10cm/4 inches) for ventilation purposes.
Poor ventilation may cause an increase in the internal
temperature of the product, resulting in a shortened
component life and degraded performance.
F
/
Enghsh -6
* Forreplacement,youwillneeda 5.91Inches-longPhillipsscrewdriverandapairofgloves.
Unplug TV, then use a
screwdriver to remove the
screw.
Remove the Lamp cover.
....' Remove the screws securing
the Lamp by using a
screwdriver.
Separate the Lamp from the
engine by holding the handle
and pulling it out.
' ......To reinstall the Lamp, follow
these steps in reverse order.
Be sure the replacement Lamp is the same type.
After replacing the lamp, align the lamp cover with the groove and secure the screw.
The TV will not turn on if the lamp cover is not correctly closed (as this will activate the
protective circuit).
English -
Listof Features
Your TV was designed and engineered using the latest technology. It is a full-featured, high-performance
unit that exceeds industry standards. [n addition, it has these special Features:
• Easy-to-operate remote control
Easy-to-use on-screen menu system you can access from the side panel or remote control
Automatic timer to turn the TV on and off at any time you choose
Adjustable picture and sound settings and the ability to memorize your Favorite settings
Automatic channel tuning for up to ] 81 channels
A special Filter to reduce or eliminate reception problems
Fine tuning control for the sharpest picture possible
A built-in multi-channel sound decoder for stereo and bilingual listening
Built-in, dual channel speakers
A special sleep timer
Picture-in-Picture capability that lets you watch Nvo channels at once
Widescreen TV with adjustable image size
Life-like clear images provided by DNIe technology
My Color Control Mode for corresponding with your color style
Color weakness Mode
Once you have unpacked your TV, check to make sure that you have all the parts shown here.
ff any piece is missing or broken, call your dealer.
Remote Control
(BP59-00048C)/
AAA Batteries
Owner's Instructions Power Cord
(3903-000144)
English -8
SidePanelButtons
The buttons on the right side panel control your TV's basic Features, including the on-screen menu
system. To use the more advanced Features, you must use the remote control.
PresstoswitchbetweenviewingTVprogramsandsignalsfromconnectedcomponenis.
Presstoseethean-screenmenu.
Presstolowerorraisethevolumeandtosebditemswhenusingtheon-screenmenu.
Presstochangechannelsandmovebetweenitemsontheon-screenmenu,
Presstoactivate(orchange)o particularitem.
SidePondJacks
Use the right side panel jacks to connect a component that is used only occasionally (a camcorder
or video game, for example).
Connedihevideosignalfroma camcorderorvideogame.
Connediheaudiosignalfromocamcorderorvideogame,
ConnectanS-videosignalfromocamcorderorvideogame.
(S-Video3jackandAudioL/Rinpui3 areesedincenjenciion.)
EngJish
FrontPane]LEDIndicators
The three lights on the front panel indicate the status of your TV.
POWER
PresstoturntheTVonandoff.
Remote Control Sensor
AimtheremotecontroltowardsthisspotontheTV.
: Light is On
(11: Light is Blinking
O : Light is Off
T_MER LAMP
O O
O
@ O
O (1t
O
(I
It takes about 30 seconds for
The TV has a fan to keep the
STANDBY/TEMP
0
0
0
Indication
Standby state.
The picture will automatically appear in about 15 seconds.
Auto Timer ON/OFF has been set and the set will automatically be
turned on in about 25 seconds.
A cooling fan inside the set is not operating normally.
Lamp cover on rear of the set is not properly shut.
Check if the ventilation hole on the rear of the set is blocked, because if
the inner temperature is too high, the power will shut off.
Lamp may be defective. Please contact a certified technician.
the TV to warm up, so normal brightness may not appear immediately.
inside lamp from overheating. You'll occasionally hear it working.
English -10
RearPanelJacks
Use the rear panel jacks to connect components such as a VCR. You can connect different components
such as VCRs, Set-Top Box and a DVD player etc., because there are Nvo sets of video input jacks and
three set of component video input jacks on the rear panel of your TV. For more information, please see
"Connections".
OANTENNA terminals
Twoindependentcablesorantennascanbeconnectdtotheseterminals.
Use"ANT] IN"and"ANT2 IN"terminalstoreceiveasignalfrom
VNF!UNFantennasoryourcablesystem.Usethe"ANT]OUT"terminalto
sendthesignalbeingreceivedbythe"ANT] IN"terminalouttaanother
component(suchasa CableSet-TopBox).ThePIPchannelcanbereceived
onlywhenasignalsourceisconnectedto"ANT1IN",
0S-VIDEO INPUT jacks
ConnectsanS-VideosignalfromanS-VHSVCRor DVDplayer.
0VIDEO/AUDIO iNPUT jacks (VCR1, VCR2)
Connectvideo/audiosignalsfromexternalsources,suchasaVCRorDVD
players.
OVIDEO/AUDIO OUTPUT jacks
SendsavideosignalfromtheTVtoanexternalsource,suchasa VCR.
Note:ItisavailableonlyinRF,VideoandS-Videomodes.
O Component], 2 jacks (Y, PB,PR,L, R)
Usethesejackstaconnectthecomponentvideo/audiosignalsfromaDVD
playeroraSet-TopBoxwhenusingthecomponentvideoinputjacks.
0
@
0
0
@
Q
PCAUDio iNPUT jacks
ConnectthesetotheaudiooutputjacksonyourPC.
PC VIDEO iNPUT jack
Connecttheseto thevideooutputjackonyourPC.
DVl (Digital Video Interface) AUDIO INPUT jacks
ConnecttothedigitalaudiooutputjacksfordevicewithDVIoaipuL
DVl (Digital Video Interface) VIDEO iNPUT jack
ConnecttothedigitalvideooutputiackfordevicewithDVIouipaL
HDMI (High Definition Muhimedia Interface)
VIDEO/AUDIO INPUT jack
ConnecltotheHDMIiackfordevicewithHDMIeuipuL
SERVICE
Thisiackisforrepairandsoftwareupgrades,
EngJish - 1 1
RemoteContrd
You can use the remote control up to about 23 FeetFromthe TV. When using the remote control, always
point it directly at the TV. You can also use your remote control to operate your Set-Top Box, VCR, Cable
box or DVD player. See pages 46~47 For details.
1. POWER 17.
Turnsthe"iVonandoff.
2. S.MODE
AdjusttheTVsoundbyselectingoneof the
presetfactorysettings(orselectyourpersonal, | 8.
customizedsoundsettings.)
3. P.MODE
Adjustthe1Ypicturebyselectingoneofthe
presetfactorysettings(orselectyourpersonal, 'J9.
customizedpicturesettings.)
4. +100 20.
PresstoselectcablechamrelsoverlOOonTV.
5. VOL +, VOL-
Presstoincreaseordecreasethevolume.
6. MUTE 2].
Presstonrutethe1"?sound.
7. FAV.CH {Favorite Channel)
Presstoswitchbetweenyourfavoritechannels. 22.
8. MENU
Displaysthenroinon-screenmmru. 23.
9. STILL
Presstostoptheactionduringaparticular
scene.Pressagaintoresumenormalvideo.
]O.P.SIZE 24.
Presstochangethepicturesize.
] ]. MODE
Selectsa targetdevicetobecontrolledbythe
Samsungremotecontrol(i.e.,_ STB,VCR,
CABLE,orDVD).
]2. PRE-CN
Tunes1othepreviouschannel.
]3. SOURCE
Presstodisplayall of theavailablevideo
sources(i.e.,TV,Set-TopBox,VCR,DVD,DI_,
PC).
|4. CHA, CHV
Presstochmlgechannels.
]5. INEO
Pressto displayinformationonthe_ screen.
] 6. EXIT
Pressto exitthemenu.
_, v, 4, _, ENTER
Presstoselecthighlighlup,down,left,orrighl.
Whileusingtheon-screenmenus,pressthe
ENTER1oactivate(or change)a particularitem.
MTS {Muhichannel
Television Stereo)
PresstochooseStereo,MonaorSAP(Secondary
AudioProgram).
SRS
ActivatesTruSuwound.
ADD/DEL
Presstoaddorerasechannelsin1heTV's
memory.
UsetheADD/DELbuttontomemorizeanderase
thefinetuningafterfinetuningchannels.
SLEEP
Presstoselecta presetlimeinlervalfor
automaticshutoff.
PiP {Picture In Picture)
ActivatesPIR
SET
Usedduringsetupofthisremotecontrol,so
thatit willworkcompatiblywithotherdevices
(Set-TopRox,VCI,_,Cablebox,DVD,etc.)
DNle {Digital Natural
image engine)
ActivatesDNIe.
25. PiP Controls
SIZE;Presstoselectthesizeof PiPwindow.
SWAP;Presstoexchangethevideosignalthat
iscurrentlydisplayedonthemainscreenwith
thesignalinthePIPwindow.
(HA/V; Press1odisplaytheavailable
channelsinsequence.(Thesebuttonschange
chamldsinthePIPwindowonly.)
26. VCR/DVD Controls
ControlsVCRorDVDfunctions:Rewind,Stop,
Play/Pause,FastForward.
27. RESET
If yourremotecontrolis notfunctioning
properly,lakeoulthebatteriesandpressthe
resetbuttonforahoul2-3 seconds.Re-insert
1hehatleriesandlry using1heremotecontrol
again.
EngJish -12
[_std[[ng Bailer[as [_ the Re_ot÷ (ont[d
With normal use, the batteries in the remote control should lost about a year. If you notice a performance
degradation while using the remote, the batteries may need to be replaced. Make sure you replace both
batteries and do not mix old and new batteries in the remote control. If you won't be using the remote
control for a long time, remove the batteries and store them in a cool dry piece.
Slide the back cover all the way out
to open the battery compartment of
the remote control.
Install two AAA size batteries.
Make sure to match the "+" and
"-" ends of the batteries with the
diagram inside the compartment.
Slide the cover back into place.
English - 13
Conne@gVHFandUHFAntermas
If you do not have a cable system, you will need to connect an antenna to your TV.
Antennaswith 30(}°ohm Hat Twin Leads
If your antenna looks like this: it has 300-ohm flat h,vin leads.
Place the wires from the Nvin
leads under the screws on the
300-75 ohm adaptor (not
supplied). Use a screwdriver
to tighten the screws.
Hug the adapter into the
"ANT ] IN" terminal on the
rear panel.
Antennaswith 75o0hmR0u_] Leads
If your antenna looks like this: it is an antenna with 75-ohm round leads.
Plug the antenna lead into the
"ANT 1 IN" terminal on the
rear panel.
EngJish - 16
SeparateVHFand UHFAntennas
If you have Nvo separate antennas for your TV (one VHF and one UHF), you must combine the
Nvo antenna signals before connecting the antennas to the TV. This procedure requires an optional
combiner-adaptor (available at most electronics shops).
...... Connect both antenna
leads to the combiner.
Plug the combiner into the
"ANTI IN" terminal on
the rear panel.
EngJish -
Conne@g@bJeTVandVCR
You can connect diFFerentcable systems to your TV, including cable without a cable box, and
cable with a cable box that descrambles some or all channels.
@b_÷withouta @b[÷ Box
[f you want to connect cable, and you do not need to use a cable box:
i Plug the incoming cable
into the "ANT 1 IN"
terminal on the rear panel.
@b[÷with a @bb Boxth_t Des€ramblesA_I(h_nnds
Find the cable that is
connected to the
ANTENNA OUT terminal
on your cable box. This
terminal might be labeled
"ANT OUT", "VHF OUT"
or simply, "OUT".
Connect the other end of
this cable to the "ANT 1
IN" terminal on the rear
panel.
English - 1 8
Connectinga @bb (onver_er Bo×
This connection allows you to watch cable and premium channels. You should keep your TV
selected to "ANT I IN" so that you can use the TV Features. When viewing premium channels,
select "ANT 2 IN" and tune the TV to channel 3 or 4 (whichever channel is vacant in your area),
then use the converter box to change channels. You will need two coaxial cables.
From
When you use a converter box with
your TV, there may be Features that you
can not program using the remote
control, such as programming your
Favorite channels and blocking
channels.
_' The output from "ANT 1OUT" is
available when select "Ant.2" in the
"Antenna" channel menu.
(ennecting a @bb (enverter Be× and a V(R
This connection allows you to watch and record basic and premium cable channels, as well as
watch videotapes. You should keep your TV selected to "ANT ] IN" so that you can use the TV's
Features.When viewing premium channels or recording with the VCR, select "ANT 2 IN"
(whichever channel is vacant in your area}, then use the converter box to change channels.
From
Cable
TV Rear Panel
Stereo VCR
Caution: If you want to record one channel
while watching another channel, a splitter
(not included) must be added between the
cable and "ANT 1 IN". One output of the
splitter goes to "ANT ] OUT" and the
second output is connected to IN on the
cable converter box.
If you have a mono VCR, connect L/Mono
to VCR Audio OUT using only one audio
cable.
If you have a S-VHS VCR, use the S-video
connections and remove the video cable.
Do not connect the video cable and the
S-video cable to video1 simultaneously.
When you use a converter box with your
TV there may be Features that you can not
program using the remote control, such as
programming your Favorite channels and
blocking channels.
EngJish -
Conn÷@ga@mco@r
The side panel jacks on your TV make it easy to connect a camcorder to your TV.
You can use your camcorder to view tapes without using a VCR.
Locate the A/V output jacks
on the camcorder. They are
usually found on the side or
back of the camcorder.
Connect a set of audio
cables belween the AUDIO
IN jacks on the TV and the
AUDIO OUT jacks on the
camcorder. If you have
mono camcorder, connect
L(mono) to camcorder audio
out using only one audio
cable.
Connect a video cable
beh,veen the VIDEO IN (or
S-VIDEO IN) jack on the TV
and the VIDEO OUT jack
on the camcorder. The
audio-video cables shown
here are usually included
with a Camcorder. (If not,
check your local electronics
store.) If your camcorder is
stereo, you need to connect
aset of two cables.
TV Side Panel
\Camcorder
Output Jacks
Camcorder
EngJish - 20
Conn÷@gs DVDPlayer
The rear panel jacks on your TV make it easy to connect a DVD player to your TV.
(0nsecting to _ ?B,?R
Connect a set of audio
cables beNveen the
COMPONENT (1 or 2)
AUDIO (L, R) IN jacks on the
TV and the AUDIO OUT
jacks on the DVD player.
Incoming
Cable or
Antenna
TV Rear Panel
9To enable Component video
viewing, connect a set of
video cables beh,veen the
COMPONENT (1 or 2)
VIDEO (Y, PB, PR)IN jacks
on the TV and VIDEO
(Y/PB/PR or Y/CB/CR) OUT
jacks on the DVD player.
Note: For an explanation of
Component video, see your
DVD player's owner's
manual. DVD Player
(onne_t[ngto ssdb ssd video[_¢ks
Connect a set of audio
cables between the AUDIO
IN (1 or 2) jacks on the TV
and the AUDIO OUT jacks
on the DVD player.
iiiiiiiiii,: "i
Connect a video cable
between the VIDEO IN (1
or 2) jack on the TV and the
VIDEO OUT jack on the
DVD player.
Incoming
CaBle or
Antenna
TV Rear Panel
DVD Player
English - 21
Conn÷ctingaDTVSet-TopBox
(onnecting to _ ?B, ?R
Connect a set of audio
cables between the
COMPONENT (1 or 2)
AUDIO (L, R) IN jacks on the
TV and the AUDIO OUT
jacks on the Set-Top Box.
Connect a set of video
cables between the
COMPONENT (1 or 2)
VIDEO (Y, PB, PR)IN jacks
on the TV and VIDEO
(Y/PB/PR or Y/CB/CR) OUT
jacks on the Set-Top Box.
Note: For an explanation of
Component video, see your
Set-Top Box owner's
manual.
Incoming
Cable or
Antenna
TV Rear Panel
(@nnectingt@DV[ (Digital Visud mnterJace_
Connect a set of audio
cables between the DVI
AUDIO (L, R) IN jacks an the
TV and the AUDIO OUT
jacks an the Set-Top Box.
DTV Set-Top Box
TV Rear Panel
dill¸.......
Connect a video cable
between the DVI IN jack on
the TV and the DVI OUT
jack on the Set-Top Box.
Incoming
Cable or
Antenna
DTV Set-Top Box
EngJish - 22
(onne_t[ns to R, G, B
Connect a set of audio
cables between the PC
AUDIO (L, R) IN jacks on the
TV and the AUDIO OUT
jacks on the Set-Top Box.
2Connect a video cable
between the PC IN jack on
the TV and the R.G.B OUT
jack on the Set-Top Box.
Incoming
Cable or
Antenna
TV Rear Panel
DTV Set-Top Box
Please check if the power of
HDMI source is on, in case that
you fail to select HDMI from the
"Source List" even after you
connected the cable of HDMI
source (DTV Set-TopBox, DVD,
etc.) to TV.
Incoming
Cable or
Antenna
DTV Set-Top Box
EngJish - 23
TurningtheTVOnandOff
Press the POWER button on the remote control.
You can also use the POWER button on the Front panel.
ViewingtheMenusandOnoScreenD@lays
The on-screen menu system allows you to control the settings of your TV. Access the on-screen menu
system by pressing the MENU button on the remote control. Once the on-screen menu appears, use
the A/V/4/_/ENTER on your remote control to select menu items and make adjustments.
You can also view the on-screen menu system and make some adjustments using the TV's side
panel buttons.
Viewingthe Menus
Press the MENU button.
The main menu is displayed.
There are five menu groups:
"Input", "Picture", "Sound",
"Channel" anct "Setup".
O, Press the A or V button to
select to an item you want in
the menu.
Press the 4, _ or ENTER
button to display, change, or
use the selected items.
Use the ENTER button to
enter items in the menu.
Press the EXITbutton to exit.
Viewingthe Dispmoy
Pressthe INFO button on the
remote control.
The TV displays the current
channel, the status of certain
picture and sound settings and
the current time.
EngJish -26
Sd÷@gtheMenuLanguage
Choose a language for the on-screen menus: English, Spanish or French.
POWER , _A OrB
Q _ .....
PMOD[ SMOD_ MODE
_ CT
_,_
PSZE _;111_ NITS SR5
CD CD CD _
Pressthe MENU button.
Press the A or V button to
select "Setup", then press the
ENTER button.
Pressthe ENTER button to
select "Language".
Press the ,_. or T button to
select the appropriate
language, then press ENTER
button.
Press the EXIT button to exit.
SelectingtheAntennaInput
You can connect to Nvo difl:erent signal sources by choosing the antenna input
(1 or 2).
Pressthe MENU button.
Pressthe A or T button to select
"Channel", then press the ENTER button.
2Pressthe ENTER button to select
"Antenna".
Pressthe A or V button to select "Ant. 1"
or "Ant.2", then press ENTER button.
Pressthe EXITbutton to exit.
Enghsh -
MemorizingtheChanneWs
Your TV can memorize and store all of the available channels For both "off-air" (antenna) and
cable channels. AFter the available channels are memorized, use the CHA and CHv buttons to
scan through the channels. This eliminates the need to change channels by entering the channel
digits. There are three steps For memorizing channels: selecting a broadcast source, memorizing
the channels (automatic) and adding/deleting channels (manual).
i _ _ _i i _ ii
PSIZE _ilLL _l]S SRS
Sdeding the Video Signd SoUrCe
BeFore your TV can begin memorizing the available channels, you
must specify the type oF signal source that is connected to the TV
(i.e., an antenna or a cable system).
Press the MENU button.
Press the A or Y button to
select "Channel", then press
the ENTER button.
(},
.....:_i!!!:ii_
Press the A or Y button to
select "Air/CATV", then
press the ENTER button.
IFyou are connected to an
antenna, press the A or Y
button to select "Air".
IFyou connected cable,
press the A or Y button to
select the type oF cable
system: "STD', "HRC" or
"IRC".
Press the EXITbutton to exit.
"ST[)", "HRC" and "IRC" identify various types of cable TV
systems. Contact your local cable company to identify the type
of cable system that exists in your particular area. At this point
the signal source has been selected. Proceed to "Storing
Channels in Memory".
Subscription cable services require service-specific requirement
for viewing.
English -28
Storing (hanne[s [n _÷_ory/Autom_ti_ _÷thsd)
First, select the correct signal source ("Air", "STD", "HRC" or "[RC") as
described on the previous page.
Pressthe MENU button.
iiiiiii Pressthe A or V button to select
"Channel", then press the ENTER button.
Pressthe,' or,' buttontoselect"Auto
...................Program", then press the ENTER button.
Pressthe ENTER button to start the auto
program.
The TV begins memorizing all of the
available stations.
Pressthe ENTER button at any time to
interrupt the memorization process.
Pressthe EXITbutton to exit.
AddingandErasingChannels
You can add channels that were not memorized or delete unwonted channels
from memory.
Pressthe MENU button.
iiiiiii Pressthe A or T button to select
"Channel", then press the ENTER button.
'2i!i!i' Pressthe Aor T button to select
"Add/Delete", then press the ENTER
button.
Repeatedly pressing the ENTER button will
alternate between add channel and delete
channel.
Pressthe CHA or CHv button (or
number buttons) to switch to the
appropriate channel, then repeat above.
Pressthe EXITbutton to exit.
Air 12 Not In Memory
AJt÷r_te metB@4
Simply press the ADD/DEL button on the remote control to add or delete channels.
English -
ChangingChannels
You can change channels on your TV by using the CHA and CHv buttons, or by direct
selection using the number buttons. You can use the number buttons to tune to any channel (even
one that has been erased or has not been memorized).
Usiagthe (:haaneJButtons
Pressthe CHA or CHv button to change channels.
When you press the CHA or CHv button, the TV changes
channels in sequence. You wiil see all the channels that the TV has
memorized. (The TV must have memorized at least three
channels.) You will not see channels that were either erased or not
memorized.
_h÷NumberBuHons
Pressthe number buttons to go directly to a channel.
When you use the number buttons, you can directly select
channels that were either erased or not memorized.
For example, to select channel "27", press the "2", then "7".
The TV will change channels when you press the second number.
To change to single-digit channels (0-9) Faster,press the "0"
before the single digit. (For channel "4", press the "0", then "4".)
To select a channel over 100, press the +100 button. (For channel
"122", press the +100 button, then "2", then "2".)
_bePrevious@_nnd
Pressthe PRE-CHbutton.
The TV changes to the last channel you were watching.
English - 30
Sd÷@gYourFavoriteChannels
You can store your favorite channels for each available input source (such as TV and CATV).
This allows you to quickly and easily find frequently watched channels by pressing the FAV.CH
button on the remote control.
Ts Stsrs Yssr Fsvsrits @ssseg:
Pressthe MENU button.
Press the Aor V button to
select "Channel", then press
the ENTER button.
2Pressthe A or T button to
select "Favorite Channels",
then press the ENTER button.
Press the A or T button to
select a channel, then press
the ENTER button.
Press the ENTER button
again to deselect the
selected channel.
Press the EXIT button to exit.
T@View ¥@srFsv@rit÷@asn÷Jss
Press the FAV.CH button repeatedly to jump from one favorite
channel to another.
Only memorized channels can be set as Favorite channels.
English - 31
ScanningtheChannels
The TV automatically scan all of the channels it has memorized.
PMODE SMODE
r_CD_
VOL CH
@ _ _ 0MUT[ SOUNC[
i:
PSZF 6TL MT5 SN5
......... /
Press the MENU button.
Press the ,_ or V button to
select "Channel", then press
the ENTER button.
Press the A or V button to
select "Scan", then press the
ENTER button.
The TV scans all of the
channels memorized.
Press the EXITbutton to exit.
Air 3
Air 4
When the "ANT 2 IN" mode is selected, the channel scan
function works an the main picture only.
EngJish -32
Lab÷JingtheChannds
Use this feature to assign an easy-to-remember label to any channel (i.e., "CBS", "ESPN",
"PBS2", CNN1 ", etc.) A label consists of five fields, where each field is a letter, a number or a
blank. When the INFO button is pressed, the channel label will appear next to the channel
number.
Pressthe CHA or CHv button to tune to the channel that
will be labeled.
iiiiiiiiii: 'i
Pressthe MENU button.
Pressthe A or T button to
select "Channel", then press
the ENTER buttom
Pressthe A or T button to
select "Name", then press
the ENTER button.
If you add or delete
the TV channel, the
labeled channels list
will also be added or
deleted.
Pressthe A/T/4/_ button
to move to the channel to be
assigned to a new name,
then press the ENTER button.
Pressthe A or T button to
select a letter, a number or a
blank. (Resultsin this
sequence: A_..Z, _, blank,
0...9,d.
Pressthe I_ button to switch
to the next field, which will
be selected.
Select a second letter or digit
pressing A or T button, as
above.
Repeat the process to select
the last two digits.
When you have finished,
press the ENTER button.
To erase the assigned new
name, select "Clear" by
pressing the A/T/4/i_
button, then press the ENTER
button.
Press the EXIT button to exit.
English - 33
Pidur÷[on rd
You can use the on-screen menus to change the "Contrast", "Brightness", "Sharpness", "Color"
and "Tint" according to personal preference. (Alternatively, you can use one of the automatic
settings. See next page.)
POWER
"Tint" doesn't operate
in PC, DVI, HDMI or
480p-Component or
higher modes.
@st@mizingthe Pkture
Press the MENU button.
Press the A or T button to
select "Picture", then press
the ENTER button.
Press the ENTER button to
...... select "Mode".
Press the A or V button to ...._,_ooo_o_.o ....... ,o
select a particular item, then _ _,_,,_,_,,,,,_,,_,_,,,,,_,,_,_,,,,,_,,_,_,,,,,_,,
press the ENTER button.
Press the 4 or _ button to
increase or decrease the
value of a particular item.
Resetting the Pktur÷ Settings to tB÷ Factory #da@s
You can return to the factory default picture settings.
Press the MENU button to
display the "Mode" menu.
Press the A or T button to
select "Reset", then press the
ENTER button.
The previously adjusted
picture settings will be reset
to the factory defaults.
English - 34
UsingAetematk ?ktu_e SeHings
Your TV has automatic picture settings ("Dynamic", "Standard" and "Cinema")
that are preset at the factory. You can activate either "Dynamic", "Standard" or
"Cinema" by pressing the EMODE button (or by making a selection from the
menu). Or, you can select "Custom" which automatically recalls your
personalized picture settings.
Pressthe MENU button.
Pressthe A or Y button to select
"Picture", then press the ENTER button.
Pressthe ENTER button to select "Mode".
Pressthe ENTER button again to select
"Mode".
Pressthe A or T button to select a
particular item, then press the ENTER
button.
Pressthe EXITbutton to exit.
AJier_te method
Press the PMODE button on the remote control
repeatedly to select one of the standard picture
settings.
*Choose "Dynamic" for viewing the TV during the day or when there is a
bright light in the room.
*Choose "Standard" for the standard factory settings.
*Choose "Cinema" when viewing a movie.
English - 35
SoundC0n rd
You con control and customize the sound levels and settings of: the TV with the remote control.
Adjustin_theVolume
Pressthe VOL+ or VOL- buttons to increase or decrease the
volume.
the MUTEBu#on
At any time, you can temporarily
cut off the sound.
Pressthe MUTE button on the
remote control.
The message "Mute" is displayed
and the sound cuts off.
To turn mute off press the MUTE
button again or, press either the
VOL+ or VOL- button.
@st0mizing the Sound
The sound settings can be adjusted to suit your personal
preference. (Alternatively, you can use one of the automatic
settings. See next page.)
Press the MENU button.
Press the A or V button to
select "Sound", then press
the ENTER button.
Pressthe',or','buttonto
...................select 'Equal'zer", then
press the ENTER button.
Continued...
English - 36
Pressthe 4 or 1_button to select a
particular item to be changed.
Pressthe A or V button to increase or
decrease the value of a particular item.
Pressthe EXITbutton to exit.
Usin9 Automatk SoundSeHings
Your TV has automatic sound settings ("Standard", "Music", "Movie" and "Speech") that are
preset at the factory. You can activate these sound settings by pressing the S.MODE button (or by
making a selection from the menu), or you can select "Custom", which automatically recalls your
personalized sound settings.
Pressthe MENU button.
Pressthe A or V button to select "Sound"
then press the ENTER button.
9Pressthe ENTER button to select "Mode".
Pressthe ,i, or V button to select a
particular item, then press the ENTER
button.
Pressthe EXITbutton to exit.
A_ler_le meih@d
Press the S.MODE button on the remote control
repeatedly to select one of the standard sound
settings.
*Choose "Standard" for the standard factory settings.
*Choose "Music" when watching music videos or concerts.
*Choose "Movie" when watching movies.
*Choose "Speech" when watching a show that is mostly dialogue (i.e., news).
*Choose "Custom" to recall your personalized settings.
English -
SettingtheClock
Setting the clock is necessary in order to use the various timer features of the TV. Also, you can
check the time while watching the TV. (Justpress the INFO button.)
POWER
O
_SIZE _iI_ MTS SRS
i i_ i_I i _ iiii
i i
Press the MENU button.
Press the A or Y button to
select "Setup", then press the
ENTER button.
Press the A or T button to
select "Time", then press the
ENTER button.
PresstheENTERbuttonto
select "Clock Set".
Press the 4 or _ button to
move to "Hour", "Min" or
"am/pm".
Set the clock you want by
pressing the A or T button,
then press the ENTER button.
Press the EXITbutton to exit.
The current time will appear every time you press the INFO
button.
Absen_Pow÷_ Off
When you set the timer "On", your television will eventually be turned off, if you do not operate any
controls during the 3 hours after the TV is turned on by timer. This function is available in only the
timer "On" mode and will prevent a leakage accident or overheating, caused by your TV left on for
a long time due to the timer "On" (when you are away on holiday, for example).
SettingtheTimers
This TV can be set to turn on or off automatically at specific times that you
choose. BeFore using the timers, you must set the TV's clock, as described
previously.
lle OnlOll Timer
Pressthe MENU bulon.
Pressthe ,& or V button to select "Setup",
then press the ENTER button.
dl].......
Pressthe A or Y button to select "Time",
then press the ENTER button.
Pressthe ,& or V button to select "On
Timer", then press the ENTER button.
Pressthe ,A.or T button to adjust "Hour",
then press the i_ button to move to the
next step.
Set other items using the same method as
above.
When Finished, press the MENU button to
return.
Pressthe A or Y button to select "Off
........Timer", then press the ENTER button.
Press the _. or V button to adjust "Hour",
then press the i_ button to move to the
next step.
Set other items using the same method as
above.
Press the EXIT button to exit.
English -
ge#[_g the Sleep_mer
The sleep timer automatically shuts off the TV after a preset time (from 30 to 180 minutes).
PSJZE 8111£ MTS SRS
REW STOP pLAy/pAUS_ FF
Press the MENU button.
Press the A or Y button to
select "Setup", then press the
ENTER button.
iii:Ziiii:ili!i!i' Press the A or V button to
select "Time", then press the
ENTER button.
Press the A or Y button to
select "Sleep Timer", then
press the ENTER button.
Press the ,A or V button to
select the preset time you
want, then press the ENTER
button.
Press the EXITbutton to exit.
A[ier_te method
Pressthe SLEEPbutton on the
remote control repeatedly until the
appropriate time interval appears
(any of the preset values from "30
Min." to "180 Min.").
If no signal is received for 15 minutes, the TV will be
automatically turned off.
English - 40
Vi÷v@ganE× ÷mdSigndSource
Use the remote control to switch between viewing signals from connected equipment, such as
VCR, DVD, Set-Top Box and the TV source (broadcast or cable).
Setting the Signd Sesrc÷
Pressthe MENU button.
Pressthe ENTER button to
select "Input".
Pressthe ENTER button to
select "Source List".
Pressthe A or V button to
select a signal source, then
press the ENTER button.
Pressthe EXITbutton to exit.
AJternatemethed
Press the SOURCE button on the
remote control repeatedly to
select an external signal source.
,_ When you connect equipment to the TV, you can choose
between the following sets of jacks: "AV1 ", "AV2", "S-Video1 ",
"S-Video2", "Component1 ", "Component2", "PC", "DVI" or
"HDMV' on the TV's rear panel, and "AV3" or "S-Video3" on
the TV's side panel.
EngJish -41
AssigningNamesto E×temdInputM0d÷
This feature enables you to name the input source you hove connected.
Press the MENU button.
Press the ENTER button to
select "Input".
Press the ,& or Y button to
...... select "Edit Name", then
press the ENTER button.
Press the A or _r button to
select a signal source, then
press the ENTER button.
Press the A or T button to
select an external device,
then press the ENTER button.
Press the EXITbutton to exit.
English - 42
Freezingthe@trentPidure
You can Freeze the picture when watching a television programme simply by pressing the STILL
button. To return to normal viewing, press it again.
_' In the PIP mode, the main and sub pictures are stilled at the
same time.
Remote(0ntrdV(R/DVDButtons
Slide the cover of the remote control up to access buttons that can control the tape functions of a
connected VCR or DVD, including Rewind, Stop, Play/Pause and Fast Forward.
Slide the cover of your remote control unit for access to the tape
Function controls. Pressthe appropriate buttons to control your
VCR or DVD.
EngJish - 43
Customizing?0urRemote(0n r0[
Your TV comes equipped with a universal remote control. In addition to controlling the TV, the
universal remote control can also operate a VCR, Cable box, DVD, and Set-Top Box (even if your
VCR, Cable box and DVD are made by manufacturers other than Samsung).
The remote control might not be compatible with all DVD Players, VCRs, Cable boxes, and
Set-Top Boxes.
PMODE
PSIZE g'NLL MTS S_S
RE_J STOP PLAYJPAU5_ FF
( ;
i_ i_iii I
/
Selling Up Your Remete (#nbo[ to Operate Your V(R ((_b[e b@×or
DVDpmayer)
Turn off your VCR (Cable box or DVD player).
PresstheMODEbuttontosw,tchtheremotecantra totheVC,
...................(CABLE or DVD) mode.
The remote control has five modes: TV, STB, VCR, CABLE, and
DVD.
On your Samsung remote control, press the SET button.
Enter 3 digits of the VCR (Cable box or DVD player) code listed
on next page for your brand of VCR (Cable box or DVD
player).
Make sure you enter 3 digits of the code, even if the first digit is
a "0". (If more than one code listed, try the first one.)
Press the POWER button. Your VCR (Cable box or DVD player)
should turn on. If your VCR (Cable box or DVD player) turns on,
your remote control is now set correctly.
If your VCR (Cable box or DVD player) does not turn on, repeat
steps 2, 3, and 4, but try one of the other codes listed for the
brand of your particular VCR (Cable box or DVD player).
Once your remote control is set up, press the MODE button any
time you want to use the remote to operate your VCR (Cable
box or DVD player).
When your remote is in the TV mode, the VCR (or DVD player)
control buttons (REW, STOP, PLAY/PAUSE, and FF) will still operate
your VCR (or DVD player).
_' When your remote control is in the STB, VCR, CABLE, or DVD
mode, the volume buttons still control your TV's volume.
Enghsh - 46
Remote[ontrdCodes
V(R (o@s
Admiral 015,08S
Aiwa 024
Akai 026,031,032
Audio Dynamics 022,025
Bell& Howell 011
Sroksonic 019
Candle 016,01S,022,054,055,061
Canon 017,062
Citizen 016,01S,022,054,055,061
Coloriyme 023
Craig 016,021
Curtis Mathes 009,016,017,023,024,055,
062,073,076
Daewoo 003,004,005,006,007,008,
022,054,085
DB 023,025
Dimensia 009
Dynatech 024
Electrohome 036
Emerson 017,01S,019,022,024,029,
032,036,043,050,051,056,
05S,066,071,074,076,077,
079
Fisher 011,021,027,028,052,057,
067
024
00%016,017,041,062
016
023
Hitachi
Instant Replay
JC Penny
JCL
Kenwood
KLH
LGIGoldstarl
Lloyd
Logik
LXI
Magnavox
Marantz
MTC
M@itech
NEC
Funai
General Electric
Go Video
Harman Kardon
CubleBoxCodes
Magnavox
Opfimus
Panasonic
Pentax
PenfexResearch+
Philco
Philips
Pioneer
Podland
PROSCAN
Quartz
014,024,044,045
017
011,014,016,017,023,O25,
039,044,060,062
011,017,023,025,039,055
011,023,025,039,055
O82
001,002,007,018,023,055,
069
O24
O40
O24
017,038,062,065
011,017,023,025,03S,039,
055,070
016,024
016,024,040,041
011,023,025,039,055,070,
073
015
017,062,084,086
014,044
O55
017,038,062,065
017,038
014,025,042,059
053,054,061
O09
011
Quasar
Radio Shack
RCA
Realsfic
Samsung
Sansui
Sanyo
Scott
Sears
Sharp
Shlnbm
Signature
Bony
Sylvania
Symphonic
Tandy
Tatung
Teac
Technics
Teknika
TMK
Toshiba
Toshiko
Totevislon
017,053
011,015,017,018,021,024,
028,036,052,062
009,014,016,017,037,044,
046,063,078
011,015,017,018,021,024,
028,036,052,062
000,016,022, 031,041,051
025
011,021
022,050,058,077
011,014,018,021,027,028,
044,052,057
015,036,048,054
026,035,040,064
024
026,035,047
017,024,038,062,065
024
011,024
039
024,039,078
0_7
017,018,024,030
076
014,022,028,057,058
018
016,018
Anvision
Cable Star
DaeHan
DeaRyun_
DongKuk
Eagle
EasternIntemalional
General Instrument
GI
Hamlin
Hitachi
Jerrold
LG(Goldstar)
Macom
015,016
015,016
0O5
003
0O4
015,016
020
054
012,013,023,031,032,033,
038,044,095,076,079
011,012,020,021,042,056
045,051,054
012,013,023,031,032,033,
038,044,054,070,073
006
045,051
Nawoo
NSC
Oak
ask Sigma
Panasonic
Philips
Pioneer
Randtek
RCA
Regal
Regency
Saewoo
Samsung
015,016,027,029,034,036,
037,040,041,048,049
O01
017
024,046
024
011,035,047,069
015,016,027,029,034,036,
037,040,041,048,049
026,028,052
015,016
008,035,074
011,020,021
010,041
OO7
000,011,030,052,071,072
Signature
Sprucer
Sfalcom
Stargate2000
Sylvania
TaePyungYang
Texscan
Tocorn
Unika
Universal
Viewstar
Warner Amex
Zeniih
054
035
054
066
019,067
002
019,067
025,02%057,058,063
03%040,049
059,060
015,016,D27,029,034,036,
037,040,041,048,049
052
022,050,065,069
I)VI)Codes
Curtis Mathes
JVC
LG(Goldstar)
Panasonic
009
003
001
006
Philips
PROSCAN
RCA
Samsun9
007
008
008
000
Sharp
Sony
Toshiba
005
004
002
EngJish -
FineTuningChenne[s
The Fine Tuning Function lets you manually adjust the TV's tuner iFyou have difficulty tuning
channels.
POWE_ _v STB V('f_ CABL[ OVD
O
_MODE_,_OD_ |
Using the number buttons on the remote control, select the
channel you want to fine tune.
Press the MENU button.
Press the A or T button to
select "Channel", then press
the ENTER button.
Press the A or V button to
select "Fine Tune", then
press the ENTER button.
Press the -_1or _ button to
....adjust the fine tuning.
To store the fine tuning
setting in the TV's memory,
press the ENTER button.
The symbol "*" is displayed.
To reset the fine tuning to
"0", select "Reset" by
pressing the A or Y button,
then press the ENTER button.
Press the EXITbutton to exit.
Air 12
Air 12_
Air 12
0
English - 48
LNA(LowNoiseAmplifier)
When a weak broadcast signal causes unclear noisy picture the "LNA" feature improves the
picture quality by setting to "On". If you experience noise on a certain channel, set the "LNA" to
"On" or "OFF" for this channel, to obtain the optimum picture.
Pressthe MENU button.
Press the A or V button to
select "Channel", then press
the ENTER button.
Pressthe A or V button to
...............select "LNA", then press the
ENTER button.
Pressthe A or V button to
select "On" or "Off", then
press the ENTER button.
Press the EXIT button to exit.
This function works in "ANT 1 IN" mode only (not available in
"ANT 2 IN" mode).
English -
Sd÷dingth÷CdorTone
Press the MENU button.
Press the A or Y button to
select "Picture", then press
the ENTER button.
Pressthe,'or,buttonto
:: select "Color Tone", then
press the ENTER button.
Press the A or Y button to
select "Cool2", "Cool1 ",
"Normal", "Warm 1" or
"Warm2", then press the
ENTER button.
Press the EXITbutton to exit.
Not available in the "Cinema" picture made.
English -50
Changingfh÷Pkiur÷Size
You can select the picture size which best corresponds to your viewing requirements.
Pressthe MENU button.
Pressthe A or Y button to
select "Picture", then press
the ENTER button.
Pressthe _ or T button to
select "Size", then press the
ENTER button.
Pressthe _1or _ button to
select the screen format you
want, then press the ENTER
button.
Pressthe EXITbutton to exit.
AJter_te method
Press the P.SIZEbutton on the remote control repeatedly to select
one of the picture size settings.
,, "Wide": Sets the picture to 16:9 wide mode.
" "Panorama": Use this mode for the wide aspect ratio of a
panoramic picture.
" "Zoom1": Magnifies the size of the picture on screen. You can
also move the picture on screen using the scroll function. Press
the A or T button to scroll the picture.
" "Zoom2": Magnifies the size of the picture more than
"Zoom1". You can also move the picture on screen using the
scroll function. Pressthe A or T button to scroll the picture.
" "4:3": Sets the picture to 4:3 normal mode. This is a standard
TV screen size.
O
O
You can select only Wide, 4:3 screen size in the Component(480p, 720p, 10801) Mode.
With PIP On, the screen automatically becomes wide in the Antenna, AV (1~3), S-Video (1~3)
or Component (480i) mode. With PIPOff, it returns to original screen size.
The picture size can't be changed when the "PIP" is active in the TV or AV mode.
English - 51
DigitdNoiseRe@dion
If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction
feature to help reduce any static and ghosting that may appear on the screen.
Press the MENU button.
Press the A or T button to
select "Picture", then press
the ENTER button.
Pressthe,,or', buttonto
...................select "Digital NR", then
press the ENTER button.
Press the A or '_' button to
select "Off" or "On", then
press the ENTER button.
Press the EXIT button to exit.
English - 52
DNIdM(DigitdNaturdImageengine)
This feature brings you more detailed image with 3D noise reduction, detail enhancement,
contrast enhancement and white enhancement. New image compensation Algorithm presents
brighter, clearer, much detailed image. DNle TM technology wiil fit every signals into your eyes.
V0L CH
ssna s s s
NP SIZg _(_ a4
REW STOP RLAY/PAUS[ FF
os_T o_sa
Pressthe MENU button.
Press the A or T button to
select "Picture", then press
the ENTER button.
Pressthe ,& or Y button to
...............select "DNIe", then press the
ENTER button.
Pressthe A or Y button to
select "Off", "Demo" or
"On", then press the ENTER
button.
Press the EXIT button to exit.
Alternate meth@d
Press the DNIe button on the remote control repeatedly to select
one of the settings.
*On: Switches on the DNIe mode.
*Off: Switches off the DNIe mode.
*Demo: The screen before applying
DNIe appears on the right and the
screen after applying DNIe appears
on the left.
EngJish - 53
Settingthe@ Cd0rC0n_rdM0@
My Color Control allows users to adjust colors to according to their preferences, by adjusting
skin, sky, and grass tones using the predefined settings ("Blue", "Green", "Pink", "Standard",
"Custom") without aFFecting other colors on the screen.
PMODi
VOL CH
Usingthe Easy(on_rd Menu
Press the MENU button.
Press the A or Y button to
select "Picture", then press
the ENTER button.
Pressthe,,or,' buttonto
select "My Color Control",
then press the ENTER button.
Press the ENTER button to
select "Easy Control'.
Press the 4 or _ button to
select one of the picture
settings you want.
The original picture (beFore
adjustment) is shown
on the left side, while the
selected mode is shown
on the right side.
Press the ENTER button to
accept the selected mode.
_' Changing the settings
in the "Detail Control"
menu (see next page)
will automatically set
the My Color Control
mode to "Custom".
Press the EXIT button to exit.
*"Blue": Emphasizing Clear Blues. Feel the clear sun shine on
the blue Mediterranean sea.
*"Green": Emphasizing Mild Greens. Feel the translucent,
romantic turquoise sea.
*"Pink": Emphasizing Warm Skin Colors.
*"Standard": Standard Picture
English - 54
@4ore geH[ngs
Pressthe MENU button.
Pressthe A or V button to
select "Picture", then press
the ENTER button.
Pressthe A or T button to
select "My Color Control",
then press the ENTER button.
Pressthe A or T button to
.................select "Detail Control", then
press the ENTER button.
Pressthe A or Y button to
select one of the My Color
Control color you want, then
press the ENTER button.
There are three colors:
"Pink", "Green" and "Blue".
Pressthe 4 or _ button to
adjust the value of a color
selected.
Changing the adjustment
value will refresh the
adjusted screen.
Resetting the My (d@r (@ntrd (d@rs i@the Facl@iy Defa@s
You can return to the factory default settings for My Color Control
colors.
Pressthe MENU button to
display the "Detail Control"
menu.
Pressthe A or T button to
select "Reset", then press the
ENTER button.
The previously adjusted My
Color Control Colors will be
reset to the factory defaults.
English - 55
SettingtheFHmM0d÷
You can automatically sense and process film signals from all sources and adjust the picture for
optimum quality.
Press the MENU Button.
Press the A or V button to
select "Picture", then press
the ENTER button.
iii!!!iiPresstheAor,'Buttonto
select "Film Mode", then
press the ENTER button.
Press the A or Y button to
select "OFF"or "On", then
press the ENTER button.
Press the EXIT button to exit.
Film mode is supported in 480i only.
English - 56
Viev@gPktureolmPidure
One of the most best features of your TV is the Picture-In-Picture (PIP) feature. The advanced PIP
system allows you to watch two different pictures at once, even if you don't have a VCR
connected to your TV.
POWER
VOL CH
PSZE ffI1LL MTS SRS
8LEP _B_ _b
O S_T O RESE_
Activatingthe P)P
Press the MENU button.
Press the A or T button to
select "Picture", then press
the ENTER button.
Press the A or _ button to
...... select "PIP", then press the
ENTER button.
Press the ENTER button to
select "PIP".
Press the A or T button to
select "On", then press the
ENTER button.
The sub picture appears in
the corner of the screen.
Press the EXITbutton to exit.
AJternate method
Pressthe PIP button on the remote control repeatedly to activate or
deactivate the PIP.
This feature doesn't function when the "V-Chip" or "Caption" is active.
This feature doesn't operate in the HDMI mode.
If you turn the TV off while watching and turn it on again, then the mode will return to normal
video.
English -
Selecting an E×ler_ Sour_÷
You can use PIPto view a signal from an external source, such as a VCR.
Pressthe MENU button.
Pressthe A or Y button to
select "Picture", then press
the ENTER button.
Pressthe ,_. or _' button to
.... select "PIP", then press the
ENTER button.
Pressthe A or V button to
select "Source", then press
the ENTER button.
If you have not connected
any equipment to the TV's
input jacks, the signal From
these inputs wiil not appear.
Pressthe A or _" button to
select an external signal,
then press the ENTER button.
Pressthe EXITbutton to exit.
_' The sub picture doesn't support "ANT 2 IN", "Component l", "Component2", "PC", "DVI" and
"HDMI".
For more information about external signals, see "Viewing an External Signal Source" (See
page 4 1). If you select "TV', the sub picture is the same as the main picture.
English - 58
Swappingthe SubPktureandMainPkture
POWE_
VOL CH
PSIZE _'11LL 1_$ SRS
0 SET 0 _SET
!iii_ iIii _ilil,_°
i i
i ii _i
J
Press the MENU button.
Press the A or V button to
select "Picture", then press
the ENTER button.
Press the Aor V button to
select "PIP", then press the
ENTER button.
Press the Aor V button to
select "Swap", then press
the ENTER button.
The sub picture appears in
the main picture, and vice
versa.
Press the EXITbutton to exit.
The swapping doesn't support "ANT 2 IN", "Component l", "Component2", "PC", "DVI" and
"HDMI'.
EngJish -
(bunging the Sized the Sub?kture
VOL C"
PSIZE _fll,L MTS SRS
Pressthe MENU button.
Pressthe A or Y button to
select "Picture", then press
the ENTER button.
Pressthe', or,buttonto
...................select "PIP", then press the
ENTER button.
%9
Pressthe A or V button to
select "Size", then press the
ENTER button.
Pressthe ,_. or V button to
select a size you want, then
press the ENTER button.
Pressthe EXITbutton to exit.
A_lernule meihed
Press the SIZE button on the remote control repeatedly to select
one of the settings.
English - 60
@ongingthe Locationof the SobPicture
Press the MENU button.
Press the A or Y button to
select "Picture", then press
the ENTER button.
Pressthe"or, buttonto
...................select "PIP", then press the
ENTER button.
%9
Press the A or V button to
select "Pos't'on', then press
the ENTER button.
Press the A or V button to
select a position you want,
then press the ENTER button.
Press the EXIT button to exit.
English - 61
(h_ng[ng the (h_nne[ of the SubPkture
After you set the signal source (antenna or cable) of sub picture, it is easy to change channels.
Pressthe MENU button.
Pressthe A or Y button to
select "Picture", then press
the ENTER button.
Pressthe "or Y button to
...............select "PIP", then press the
ENTER button.
Pressthe A or V button to
select "Channel", then press
the ENTER button.
Pressthe A or Y button to
select a channel you want,
then press the ENTER button.
Pressthe EXITbutton to exit.
Alternate method
Pressthe CHA or CHV button on the remote control to change
channels of sub picture during PIPon.
The channels of sub picture are not available when antenna is set to "ANT 2 IN". It links to
"ANT 1 IN".
English - 62
Sde_tingthe SoundSource
You can use this Featureto hear sound from the main or sub picture.
Pressthe MENU button.
Pressthe A or Y button to
select "Picture", then press
the ENTER button.
Pressthe A or V button to
...... select "PIP", then press the
ENTER button.
Pressthe A or V button to
select "Select Sound", then
press the ENTER button.
Pressthe A or V button to
select "Main" or "Sub",
then press the ENTER button.
"Main" is for the main TV
picture audio, and "Sub" is
for the sub picture (PIP)
audio.
Pressthe EXITbutton to exit.
EngJish - 63
SettingtheSRSTS×T
TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 muhichannel
content over two speakers. Trusurround delivers a compelling, virtual surround sound experience
through any two-speaker playback system, including internal television speakers. It is fully
compatible with all muhichannel formats.
Press the MENU button.
Press the A, or V button to
select "Sound", then press
the ENTER button.
Pressthe'.or,buttonto
select "SRS TSXT", then
press the ENTER button.
Press the ,A.or V button to
select "Off", "3D Mono" or
"Stereo", then press the
ENTER button.
Press the EXITbutton to exit.
AJternatemethed
Pressthe SRS button on the remote control repeatedly to select one
of the settings.
EngJish -64
ChoosingaM@io@anndSound(MTS)track
Depending on the particular program being broadcast, you can listen to "Mona", "Stereo" or
"SAP (Separate Audio Program)". "SAP" audio is usually a foreign-language translation.
Sometimes "SAP" has unrelated information like news or weather.
Pressthe MENU button.
Pressthe A or V button to
select "Sound", then press
the ENTER button.
PresstheAorVbuttonto
...................select "MTS", then press the
ENTER button.
Pressthe A or V button to
select "Mono", "Stereo" or
"SAP", then press the ENTER
button.
Pressthe EXITbutton to exit.
AJter_te method
Press the MTS button on the remote control repeatedly to select
one of the settings.
Choose "Mono" for channels that are broadcasting in mono, or
if you are having difficulty receiving a stereo signal.
Choose "Stereo" for channels that are broadcasting in stereo.
Choose "SAP" to listen to the Separate Audio Program, which
is usually a foreign-language translation.
EngJish - 65
AutoVdum÷
Each broadcasting station has its own signal conditions, and it is inconvenient to adjust the
volume every time the channel is changed. "Auto Volume" automatically adjusts the volume of the
desired channel by lowering the sound output when the modulation signal is high or by raising
the sound output when the modulation signal is low.
Press the MENU button.
Press the A or Y button to
select "Sound", then press
the ENTER button.
Pressthe',or,' buttonto
...................select "Auto Volume", then
press the ENTER button.
Press the A. or Y button to
select "Off" or "On", then
press the ENTER button.
Press the EXITbutton to exit.
EnjoyingtheSoundofE×_emdSpeakers
When using external device such as Home Theater Systems, external speaker, or external Audio
AmpliFier set "Internal Mute" to "On" to produce sound which is consistent with what the picture
shows.
Pressthe MENU button.
Press the A or V button to
select "Sound", then press
the ENTER button.
Pressthe A or Y button to
...............select "internal Mute", then
press the ENTER button.
Pressthe A or V button to
select "Off" or "On", then
press the ENTER button.
Press the EXIT button to exit.
EngJish -
Using VoChip
Access to channels and programs is controlled by a password (i.e., a 4-digit secret code that is
defined by the user). The on-screen menu will instruct you to assign a password (you can change
it later, if necessary).
The V-Chip doesn't function when the PIP is active.
How to @_ng÷YearPassword
Press the MENU button.
Press the A or T button to
select "Setup", then press the
POWER ENTER button.
Press the A or V button to
select 'V-Ch'p", then press
the ENTER button.
VOL CH
Press the number buttons to
enter your current 4-digit pin
number.
(The default pin number far
a new TV set is "0000".)
The "V-Chip" menu is
displayed.
Press the A or V button to
select "Change PIN", then
press the ENTER button.
<USA>
<Canada>
If you brget the pin
number, press the
remote control buttons
in the following
sequence, which resets
the pin to 0-0-0-0:
POWER (Off), MUTE,
8, 2, 4, POWER (On).
Press the number buttons to
enter your new 4-digit pin
number.
Re-enter your new pin
number to confirm.
Press the EXITbutton to exit.
How to Enable/DisabletheRating(onbds
Pressthe MENU button.
Pressthe A or V button to
select "Setup", then press the
ENTER button.
Pressthe A or T button to
select "V-Chip", then press
the ENTER button.
....d ......
Pressthe number buttons to
enter your current 4-digit pin
number.
(The default pin number far
a new TV set is "0000".)
The "V-Chip" menu is
displayed.
Pressthe ENTER button to
seJect "V-Chip Lock".
Pressthe A or T button to
select "On", then press the
ENTER button.
Pressthe EXITbutton to exit.
<USA>
<Canada>
EngJish -
How to Se| up ilestrktio.s Usingthe "TV Parental Guidelines"
The parental restrictions can be set up using either oF two methods: The "TV Parental Guidelines"
or "MPAA Rating".
PSZE _nLL M_S SRS
Press the MENU button.
Press the A or T button to
select "Setup", then press the
ENTER button.
Press the A or T button to
select "V-Chip", then press
the ENTER button.
Press the number buttons to
enter your current 4-digit pin
number.
(The default pin number for
a new TV set is "0000".)
The "V-Chip" menu is
displayed.
Press the A or V button to
select "TV Parental
Guidelines", then press the
ENTER button.
<USA>
<Canada>
English - 70
You can independently lock the TV
ratings. The locked TV (FCC) ratings are
indicated by the symbol "_".
Pressthe A/T/4/_ buttons and the
ENTER button to activate the appropriate
restrictions for TV (FCC) rating system.
TV-Y : Young children
TV-Y7 : Children 7 and over
TV-G : General audience
TV-PG : Parent Guidance
TV-14 :Viewers 14 and over
TV-MA : Mature Audience
Pressthe EXITbutton to exit.
These categories consist of two separate groups: "TV-Y" and "TV-Y7" (young
children through age 7), and "TV-G" through "TV-MA" (everybody else).
The restrictions far these two groups work independently: If ahousehold
includes very young children as well as young adults, the TV parental
guidelines must be set up separately for each age group. (See page 73.)
EngJish - 71
How to Setup ilestrictio.sUsingthe "MPAA Rating"
The Movie rating system uses the "MPAA" (Motion Picture Association of America) system, and its
main application is for movies.
When the rating control is on, the TV will automatically block any programs that are coded with
objectionable ratings (either "MPAA Rating" or "TV Parental Guidelines").
Press the MENU button.
Press the A or T button to
select "Setup", then press the
ENTER button.
Press the A or T button to
select "V-Chip", then press
the ENTER button.
dJ
Press the number buttons to
enter your current 4-digit pin
number.
(The default pin number for
a new TV set is "0000".)
The "V-Chip" menu is
displayed.
Press the A or Y button to <LISA>
select "MPAA Rating", then
press the ENTER button.
<Canada>
You can indepen&
the movie ratings.
movie ratings are indicated
by the symbol
Press'the A/T/ENTER
buttons to activate the
appropriate restrictions for
movie rating system.
EngJish -72 Press the EXITbutton. J
mmporta tNo esAboUtPare d Locks
Explanation of the MPAA and TV (FCC) Rating Systems:
TV (FCC)Age-BasedRatings TV-G
General audience. It contains little or no
TV-MA violence, no strong language, and little or no
Mature audiences only. This program may sexual dialog or situations.
cantaiq mature themes, profane language,
graphic violence and explicit sexual content. TV-Y7
Directed to older children Themes and
TV-14 elements in this program may include mila
Parents strongly cautioned. This program may physical or comedic violence, or 'nay frighten
cantain sophisticated themes, sexual content, children under the age of seven
strong language and more intense violence. TV-Y
TV-PG All children. The themes and elements in this
Parental guidance suggested. The program program are specifically designed for a very
may contain infrequent coarse language, young audience including children from ages
Jimted violence, some suggestive sexual two - six.
dialog and situations.
TV (FCC)ContentCategory MPAA RatingSystem(Movies)
GGenera aud ence No restr ct on
VViolence.
S Sexual _ontent PG Children under 13 should be
LOffensive Jan ua e accompanied by an adult.
g g.
DDialog sexual innuendo. PG-13 Parental guidance suggested. Children
FV Fantasy or cartoon violence, under 13 should be accompanied by an
adulL
R Restricted. Viewers should be 17 or older.
BIC- 17 Nat classified. Viewers should be 17 or
NR Not rated.
*TV (FCC) ratings : The particular rating that you have selected will be locked (and indicated as
a red "L" on a blue background). Also, all of the age-based ratings will be locked within the
particular group (i.e_, "group 1" or "group 2"). Suppose that the TV-G rating and all of its
contents (V, S, L, and D) are locked. In that case, more restrictive ratings (TV-PG,TV-14, and
TV-MA) and all of their contents (V, S, L, and D) are automatically locked as well.
*MPAA ratings : The particular rating that you have selected will be locked. In addition, more
restrictive ratings will be locked as well.
*Neither TV (FCC) ratings nor MPAA ratings apply to news programs.
English -73
How to Setup Restrictions Usingthe CanadianEnglish
Press the MENU button.
Press the A, or V button to
select "Setup", then press the
ENTER button.
Press the A or V button to
select "V-Chip", then press
the ENTER button.
2:Press the number buttons to
enter your current 4-ctigit pin
number.
(The default pin number for
a new TV set is "0000".)
The "V-Chip" menu is
displayed.
Press the A or V button to
select "Canadian English",
then press the ENTER button.
<Ca.ada>
EngJish - 74
Pressthe Aor V button to select a
appropriate restriction.
Pressthe ENTER button to activate the
restriction selected.
The "@" symbol is indicated.
Pressthe EXiT button.
EExempt programming incJudes...news, sports,
documentaries and other information programming, talk
shows, music videos, and variety programming.
¢Program"ninc intended for children under age 8
(:8+ Programming generally considered acceptable for children
8 years and over to watch on their own.
GGeneral programming, suitable for all audiences.
P6 _arental Guidance.
14+ Programminc contains themes or content which may not
be suitable for viewers under the age of 14.
18÷ Adult programming.
EngJish - 75
How to Set sp R÷_t_ktiss_ U_iss th÷ (sssdiss Fr÷sch
P_z_ &'TEL ME5 SRS
21
Press the MENU button.
Press the Aor V button to
select "Setup", then press the
ENTER button.
Press the A or T button to
select "V-Chip", then press
the ENTER button.
Press the number buttons to
enter your current 4-digit pin
number.
(The default pin number for
a new TV set is "0000".)
The "V-Chip" menu is
displayed.
Press the A or V button to
select "Canadian French",
then press the ENTER button.
<Canada>
EngJish - 76
Pressthe Aor T button to select a
appropriate restriction.
Pressthe ENTER button to activate the
restriction selected.
The "_" symbol is indicated.
Pressthe EXITbutton.
G
Exempt programming mcJudes...news sports,
documentaries and other information programming, talk
shows, music videos, and variety programming.
General.
8 arts+ 8+ General-Not recommended for young children.
13 arts÷ Programming may not be suitable for children under the
age of 13.
16 arts+ Programming is qot suitable for children under the age of
16.
18 arts+ Programming restricted to adults.
English -
ViewingClosed@prioriInf0rmati0n
Your TV decodes and displays the closed captions information that is broadcast along with some
television shows. These captions are usually subtitles for the hearing impaired or translations into
other languages. All VCRs record the closed caption signal from television programs, so pre-
recorded video tapes can also deliver closed-caption information. Check for the closed caption
symbol (1_1) on the tape's package or your TV program-schedule.
Press the MENU button.
Press the A or T button to
select "Setup", then press the
ENTER button.
Press the ,A or T button to
select "Caption", then press
the ENTER button.
Press the ENTER button to
select "Caption".
Press the A or T button to
select "On", then press the
ENTER button.
Press the A or T button to
select "Mode", then press
the ENTER button.
Press the A or T button to
select "Caption" or "Text",
then press the ENTER button.
In "Caption" mode, caption appears at the bottom of the
screen, and they usually cover only a small portion of the
picture.
In "Text" mode, information unrelated to the program, such as
news or weather, is displayed. Text often covers a large portion
of the screen.
EngJish - 78
Depending on the particular
broadcast, it might be
necessary to make changes
to "Channel" and "Field".
Pressthe A or T button to
select "Channel", then press
the ENTER button.
Pressthe A or Y button to
select "1" or "2", then press
the ENTER button.
Pressthe A or V button to
select "Field", then press the
ENTER button.
Pressthe A or T button to
select "1" or "2", then press
the ENTER button.
Different channels and fields display different inbrmation:
"Field 2" carries additional information that supplements the
information in "Field 1". (Far example, "Channel 1" may have
subtitles in English, while "Channel 2" has subtitles in Spanish.)
The Caption function doesn't operate when the PIP is active.
Misspellings and unusual characters sometimes occur during closed caption transmissions,
especially those of live events. There may be asmall delay before captions appear when you
change channels. These are nat malfunctions of the TV.
English -
SettingtheBlueScreenMode
If no signal is being received or the signal is very weak, a blue screen automatically replaces the
noisy picture background. If you wish to continue viewing the poor picture, you must set the "Blue
Screen" mode to "OFF".
Press the MENU button.
Press the A, or V button to
select "Setup", then press
the ENTER button.
:::i!!!:PresstheAor,buttonto
select "Blue Screen", then
press the ENTER button.
Press the A or T button to
select "On" or "OFF", then
press the ENTER button.
Press the EXITbutton to exit.
Enghsh - 80
SettingTheOn/OffMd0dy
A melody sound can be set to come on when the TV is powered On or OFF.
Pressthe MENU button.
Pressthe A or V button to
select "Setup", then press the
ENTER button.
Pressthe A or V button to
...... select "Melody", then press
the ENTER button.
Pressthe ,i, or V button to
select "On", then press the
ENTER button.
Pressthe EXITbutton to exit
the menu.
EngJish - 81
Usingthe(d0r Weakn÷ssEnhanc÷mentFeature
This feature adjusts the Red, Blue or Green color to enhance the picture according to the user's
particular color weakness.
Press the MENU button.
Press the _ or V button to
select "Setup", then press
the ENTER button.
iii!!!iiPresstheAorVbuttonto
select "Color Weakness",
then press the ENTER button.
Press the ENTER button to
select "Color Weakness".
Press the A or V button to
select "On", then press the
ENTER button.
Press the A or V button to
.... select a color to be adjusted,
then press the ENTER button.
Press the _1 or 1_button to
adjust the value of a color
selected.
Press the EXITbutton to exit.
English - 82
UsimgYourTVmse(omputer(P()D@lay
Now to (onnect Your ?( to the TV
This figure shows the Standard Connector-jack panel. The actual configuration on your TV may be
different, depending on the model.
TV Rear Panel
15Pin(D-Sub)
Cable
Audio Cable
PC
The "SERVICE" jack is for repairs and software upgrades.
English - 84
Setting up Your P( $dtwar÷ (Basedo_ Widows 98_
The Windows display-settings for a typical computer are shown below. The actual screens on your
PC will probably be different, depending upon your particular version of Windows and your
particular video card. However, even if your actual screens look different, the same basic setup
information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung
Dealer.)
First, click on "Settings" on the Windows start menu.
While "Settings" is highlighted, move the cursor so
that "control panel" is highlighted.
When the control panel screen appears,
click on "Display" and a display dialog-box
will appear.
Navigate to the "Settings" tab on the display dialog
box,
The two key variables that apply to the TV-PC interface
are "resolution" and "colors". The correct settings for
these lwo variables are:
* Screen area (sometimes called "resolution"): 1024 x
768 pixds
* Colors: "24-bit" color (might also be expressed as
"16 million colors").
If a vertical-frequency option exists on your display
settings dialog box, the correct value is "60" or "60
Hz". Otherwise, just click "OK" and exit the dialog
box.
'iii_ii_iii_ii¸i¸i_i!i_!ii¸i;i¸ii!i_?u¸_!iii!ii!!iiiii!!i •
:Panel
o_e the _e_n_ _n
_mpute,
32b_ ODO_ A¢¢e¢$Jb_,o Ad,_ New Add/R_,ove Adobe G_a
Oplions Hardware Progtarl _
Da_e/Iir_ DJ_lay F_,d Faet Fon_ Garr_e
@
HP Je_dmin Internet Keyboar_ UveUNate t4ail and Fa_
_4ode,,_ _aue I,_uIt_r_a N_a_oor_ Pa_#o,cl=
,O
continued...
EngJish - 85
DispmoyModes
Mode Resolution HorizontalFrequency[KHz] VerticalFrequency[Hz] PixelClock[MHz] SyncPolarity(H/V)
VGA 640 x 350 31.47 70.00 25.175 +/-
720 x 400 31.47 70.00 28.322 -/-
37.93 85.00 35.5 -/+
640 x 480 31.47 60.00 25.175 -/+
35.00 66.70 30.24 -/-
37.86 72.80 31.50 -/-
37.50 75.00 31.50 -/-
43.27 85.00 36.00 -/-
SVGA 800 x 600 35.16 56.30 36.00 -+/-
37.88 60.30 40.00 +/+-
48.08 72.20 50.00 +/+
46.87 75.00 49.50 +/+
53.67 85.10 56.25 +/+
832 x 624 49.73 74.60 57.284 -/+
XGA 1024x 768 48.36 60.00 65.00 -/-
56.40 70.10 75.00 -/-
60.02 75.00 78.75 +/-
DTV 1920x 1080i 33.75 60 74.25 X
1280 x 720p 45.00 60 74.25 X
720 x 483p 31.47 60 27 X
NOTES
Both screen position and size will vary, depending on the type of PC monitor and its resolution.
The table above shows all of the display modes that are supported:
The interlace mode is not supported.
The TV will operate abnormally if anon-standard video format is selected.
_'When this TV is used as a PC display, 32-bit color is supported (over 16 million colors).
Your PC display screen might appear different, depending on the manufacturer (and depending
on your particular version of Windows). Check your PC instruction book for information about
connecting your PC to aTV display-monitor.
Same modes as PC are supported for the signal input to the DVI jack. Only aseparate sync
signal is supported.
AdiusflngthePktureQudity
The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not
removed by fine tuning alone, then do the Frequency adjustments to the utmost and fine tune
again. After the noise has been reduced, re-adjust the picture so that it is aligned on the center of
screen.
Pressthe SOURCE button to select "PC".
PresstheMFNUbutton
...................Pressthe A or V button to
select "Setup", then press the
ENTER button.
Pressthe A or V button to
select "PC", then press the
ENTER button.
Pressthe A or Y button to
.... select "Coarse" or "Fine",
then press the ENTER button.
Pressing the 4 or I_ button
to remove the picture noise.
Press the EXIT button to exit.
This feature may change the width of the image. If necessary,
adjust the position to center.
English -
ChangingthePktur÷Position
After connecting the TV to your PC, adjust the position of picture if it is not well-aligned.
v0__ c,_
MuTE /fZ<_"
f_ /#FO
PSZ_ STLL MTS SNS
Press the SOURCE button to select "PC".
iii!!!iiPresstheMENUbutton.
Press the Aor Y button to
select "Setup", then press the
ENTER button.
Press the Aor V button to
select "PC", then press the
ENTER button.
Press the A or Vbutton to
..... select "Pos't'on', then press
the ENTER button.
Adjust the position of picture
by pressing the A/T/4/i_
button.
Press the EXITbutton to exit.
"If a PC signal is input to "DVI" or "HDMI", you can't adjust the
quality and position of picture.
English - 88
AdiusflngthePktur÷QudityandPositionAut0matkdly
This Feature allows the TV to self-adjust to the incoming video signal. The values of Fine, coarse
and position are adjusted automatically.
Pressthe SOURCE button to select "PC".
Pressthe MENU button.
...............'Press the A, or T button to
select "Setup", then press the
ENTER button.
Pressthe A or V button to
select "PC", then press the
ENTER button.
...../....
Pressthe A or Y button to
select "Auto Adjustment",
then press the ENTER button.
The picture quality and
position are automatically
adjusted, and the picture
returns to original view
about a few seconds later.
Press the EXIT button to exit. Auto in Progress
EngJish -
[nifidizhgthePidur÷Settings
You con replace all picture settings with the factory default values.
Press the SOURCE button to select "PC".
iii!!!iiPresstheMENUbutton.
Press the A, or V button to
select "Setup", then press the
ENTER button.
Press the A or V button to
..........select "PC", then press the
ENTER button.
Press the A or V button to
select "Recall", then press
the ENTER button.
The picture settings are
replaced with the Factory
default values.
Press the EXIT button to exit.
English - 90
ChangingthePiciur÷Size(PCM0d÷)
You can select the picture size which best corresponds to your viewing requirements.
" The "Wide PC" and
"Expand" modes are
recommended for the PC
mode.
In VGA (640x480) and
SVGA (800x600) modes,
the "Wide" and "4:3"
modes are available.
" In XGA (1024x768)
mode, the "Wide" mode
is available.
Pressthe SOURCE button to select "PC".
9Pressthe MENU button.
Pressthe A or T button to
select "Picture", then press
the ENTER button.
Pressthe A or T button to
select "Size", then press the
ENTER button.
Pressthe 4 or I_ button to
select the screen format you
want, then press the ENTER
button.
Pressthe EXITbutton to exit.
Alternate method
Press the P.SIZEbutton on the remote control repeatedly to select
one of the picture size settings.
,, "Wide TV": Scales the picture to the size of the TV screen
regardless of the aspect ratio of the input source.
,, "Wide PC": Scales the picture to 92% of the TV screen,
regardless of the aspect ratio of the input source. The picture
position (r_h, [3_) and size (_) adjustment are available by
pressing the A/T/4/i_ button.
" "Expand": Scales the picture to the aspect ratio of the input
source.
" "4:3": Displays the picture as it is without changing the aspect
ratio of input source.
Source(PC/DVI) Picture Size
1920x 1080i Wide TV _ 4:3
1280x 720 Wide TV_ Wide PC _ Expand _ 4:3
1024x 768 Wide TV _ Wide PC _ Expand
720 x 483 (480p) Wide TV _ 4:3
Others Wide TV _ Wide PC _ Expand _ 4:3
Enghsh - 91
If the TV seems to have a problem, first try this list of possible problems and solutions. If none of
these troubleshooting tips apply, then call your nearest service center.
PossibleSolution
Try another channek
djust the antenna.
Check all wire connections.
Try another channel.
Adjust the antenna.
Make sure the MUTE button is off.
Try another channel.
Press the SOURCE button.
Make sure the TV is plugged in.
Check the antenna connections.
Make sure the program is broadcasted in color.
Adjust the picture settings.
Adjust the antenna.
Check all wire connections.
If you are using a VCR check the tracking.
Unplug the TV for 30 seconds, then try operating it
again.
Press the MODE button to pub your remote control
into TV mode.
Make sure the remote has batteries.
Make sure the wall outet is working.
Make sure the remote has batteries.
The display panel used for the DLPTV is composed of many tiny pixels.
These, pixels may occasionally appear on the screen.
English - 94
d÷aningandMaintainingYourTV
With proper care, your TV will give you many years of service. Please Fellow these guidelines to
get the maximum performance frem your TV.
P_¢eme_t
Do net put the TV near extremely het, celd, humid or dusty places.
Do not place the TV near appliances with electric motors that create magnetic Fields, such as
vacuum cleaners.
Keep the ventilation openings clear; do net piece the TV on o soft surface, such as cloth or
paper.
Piece the TV in o vertical position only.
Liquids
,, Do not handle liquids near or on the TV. Liquids that spill into it can cause serious damage.
*Never open the cabinet or touch the parts inside.
*Wipe your TV with a clean, dry cloth. Never use water, cleaning Fluids, wax, or chemicals.
*Do not put heavy objects on top of the cabinet.
" This DLP TV projects the image onto a large screen by applying an optical system.
If you place the TV set face down, it might cause a problem because dirt, or some other
contaminant may become attached to the inside of the TV set.
*If your TV is suddenly moved from a cold to a warm place, unplug the power cord, and allow
at least two hours For moisture that may have Formed inside the unit to dry completely.
UsingYourTVinAnotherCountry
ff you plan to take your TV with you to a Foreign country, please be aware of the diFFerent
television systems that are in use around the world. A TV designed for one system may not work
properly with another system due to diFFerencesin the TV channel Frequencies.
Model HbR4264W HbR4664W HbR5064W HBR5664W HbR6164W
Voltage AC110-120V_ AC110-120V_ AC110-120V_ AC110-120V_ AC110-120V_
FrequencyofOperation 60Hz 60Hz 60Hz 60Hz 60Hz
PowerConsumption 200watts 200watts 200watts 200watts 200watts
Dimension 999x33].3xZ55.5mm]088x34].5x814mm ]182x355.5x870mm]330x387.5x962mm1446x466.5xlO56.5mm
{WxDxH) 39.33x]3.04x29.Z4inches42.83x13.44x32.05inches46.54x14.00x34.25inches52.36x15.26x37.87inches56.93x]8.37x4].59inches
Weight 28Kg/ 61.73Ibs 30.3Kg/ 66.80Ibs 33Kg/72.75Ibs 36.7Kg/80.91Ibs 42.9Kg/ 94.58Ibs
EngJish -95
ELECTRONICS
1-800-SAMSUNG (1-800-726-7864)
Samsung Electronics America
Service Division
400 Valley Road, Suite 201
Mount Arlington, NJ 07856
www.samsung.com
Samsung Electronics Canada Inc.
Samsung Customer Care
7037 Financial Drive
Mississauga, Ontario
L5N 6R3
www.samsung.ca
BP68-00493A-00

Navigation menu