SAMYUNG ENC STR580D MARINE DSC/VHF RADIO TELEPHONE User Manual

Download:
Mirror Download [FCC.gov]
Document ID	383626
Application ID	uqzH59hB+LFLuphN38+wrQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	37.18kB (464731 bits)
Date Submitted	2003-12-22 00:00:00
Date Available	2003-12-17 00:00:00
Creation Date	2003-10-31 16:50:40
Producing Software	Acrobat Distiller 4.0 for Windows
Document Lastmod	2003-10-31 16:51:03
Document Title	User Manual

SAMYUNG ENC
MARINE DSC/VHF RADIO TELEPHONE
FOR GMDSS
STRSTR-580D
(Instruction Manual)
SAMYUNG ENC CO., LTD.
LTD
STR-580D
SAMYUNG ENC
CONTENTS
*PRECAUTION*PRECAUTION-------------------------------------------------------------1
*BASIC KEY OPERATIONOPERATION-----------------------------------------------------2
1. INTRODUCTION
1.1 INTRODUCTION--------------------------------------------------------5
1.2 FEATURES------------------------------------------------------------5
2. BASIC CONFIG
CONFIGURATION
URATION-------------------------------------------------7
2.1 STANDARD LIST--------------------------------------------------------7
2.2 OPTION LIST-----------------------------------------------------------7
3.SPECIFICATION--------------------------------------------------------- 8
3.1 MAIN UNIT(STR-580D)---------------------------------------------------8
3.2 DPU-414 PRINTER-----------------------------------------------------10
3.3 CHANNEL TABLE--------------------------------------------- ---------11
4. OPERATION-------------------------------------------------- ---------14
4.1 TURNING ON THE POWER--------------------------------------- ---------14
4.2 BASIC OPERATING-------------------------------------------- ---------14
4.3 HOW TO CONTROL PER PURPOSE-----------------------------------------25
4.4 DIGITAL SELECTIVE CALL(DSC)MODE----------------------------- ---------26
4.5 DPU-414 PRINTER------------------------------------------------------44
5. DESCRIPTION OF COMPONENTS
-----------------------------------46
5.1 GENERAL------------------------------------------------------ -------46
5.2 MAIN UNIT OF STR 580D------------------------------------------------- 46
5.3 DPU-414 PRINTER----------------------------------------------- -------49
6. INSTALLATION
INSTALLATIONNSTALLATION --------------------------------------------- ------50
6.1 Dismantling package and checking overall parts--------------------------------50
6.2 Selection of installation place----------------------------------------- -----50
6.3 Power unit connection----------------------------------------------- -----50
6.4 Connecting of external speaker---------------------------------------- -----51
6.5 Hand MIC Connection-----------------------------------------------------51
6.6 Antenna Installation-------------------------------------------------------52
6.7 Total Cable Connection----------------------------------------------------54
STR-580D
SAMYUNG ENC
7. MAINTENANCE & OPERATI0N
OPERATI0N--------------------------------------------55
7.1 OVERVIEW------------------------------------------------------------55
7.2 USING TESTER------------------------------------------ --------------55
7.3 Daily check and Maintenance------------------------------- --------------55
7.4 Operating of Controller---------------------------------------------------57
7.5 Caution---------------------------------------------------------------57
8. How to set MMSI No.
8.1 How to enter ID----------------------------------------------------------58
8.2 How to connect GPS data--------------------------------------------------58
9. CIRCUIT DIAGRAM & INSTALLATION DIAGRAM------------------------------59
STR-580D
SAMYUNG ENC
STR-580D
SAMYUNG ENC
PRECAUTION
It is recommanded that USER read this manual carefully before turning power on.
1. TRANSMITTING DISTRESS CALL AND TERMINATION PROCESS
1-1
* Press DISTRESS
for 5 seconds to get ready for distress call.
* When press DISTRESS key, alarm tone sound and 'Call Led' light on.
* After release DISTRESS key, the distress message will be transmitted.
* Do not execute a distress call except in an emergency
* When executing a distress, follow the instructions of the captain's or officer
in charge.
* Do not execute a test distress call that will get local shipping and Rescue
Centers inconvenience.
* If a distress call is transmitted accidentally, stop transmission
immediately and inform local ships and rescue organization that it is an
accidental call, using CH16 as instructed in this manual.
1-2
* The distress message is transmitted by random intervals of 3.5 to 4.5
minutes thereafter. This process is repeated until a response is
received or the process is transmitted by full message.
* If a distress call is accidentally transmitted, terminate transmission
immediately as press CLR . Even though CLR was pressed, the distress message
is transmitted by full message.
* Use CH16 to inform local ships and rescue organizations that the
transmission was accidental.
1-3
When a distress call is received, be sure to inform the ship's captain or officer
in charge
2. INITIAL SETTING ON INSTALLATION
Below items need to be set on installation. Please contact head office or
our local agents.
2-1 SUPPLY VOLTAGE(18V - 31.2V)
VHF main unit(STR-580D)input voltage : DC13.6V
VHF power supply unit(SP-160AD)input voltage :DC 18V～31.2V or AC
110V/220V
10%
2-2 ID number
This equipment needs to be set ID number for each one.
(Note : Please refer to 6. How to set MMSI No.)
-1-
STR-580D
SAMYUNG ENC
3. OTHER CONDITION
3-1 For using telephone service by DSC, confirm from the coast station how to report
the end of telephone because there is no international standard of its fare system
3-2 The printing paper for DPU-414 printer is the special paper which turns black by
thermochemistry reaction. Take the following precautions when using this paper
zStore the paper away from heat, humidity and light
zDry your hand before handling the paper
zDo not use organic adhesives on the paper
zDo not use adhesives tape on the paper
zDo not leave the paper to remain in contact with polyvinyl chloride
film for a long period of time
zDo not leave the paper in contact with freshly copied diazotype or wet
process paper
zDo not place the paper to come into contact with organic solvents
BASIC KEY OPERATION
OPERATION
ON/OFF
ON/OFF : Turn power on or off
CH16 : To select CH16 by pressing this key
CH70 : To select CH70 by pressing this key
PRI : To select PRIVATE CHANNEL by pressing this key
To input channel number in 3 numbers of figures by using number key
CTRY:
CTRY To set 3 areas(ITU, USA, CAN) using this key
SCAN : To start SCANNING with the present SCAN mode being indicated. If press
again, it will be finished. Can modulate the speed of scanning to use
〔FUNC〕+〔↑〕,〔FUNC〕+〔↓〕Key
To continue SCAN into next channel pressing 〔※〕key
DUAL : Receive present CHANNEL and CH16 mutually
MEMO : Use this key in case of appointing 'MEMORY SCAN' / 'GROUP SCAN'
channel . To input CHANNEL MODE using 〔CTRY〕,〔PRI〕KEY.
Channel number is input with 3 number of figure using number key
CALL : To transmit the present DSC message in DSC message edit screen.
-2-
STR-580D
SAMYUNG ENC
25W/1W : Transmitting output is used among 25w or 1w mutually.
When local distance communication made, use 1W.
DIM : Brightness of LCD Indication and KEYBOARD BACK-LIGHT can be adjusted to 4 steps
PRINT : To print out received DSC message
SPEAKER : ON /OFF of speaker
DISTRESS : Press this key to transmit distress call (Caution : Never test!! )
CLR : To cancel DSC call / To stop alarm sound / To go 1 step behind
ENT : To select item and enter the edited value into the system
0 ～ 9
: CHANNEL SELECTION and NUMBER INPUT
PRIVATE CHANNEL is 3 number of figures in case of selecting
CHANNEL, Other channel is 2 number of figures
▲ ～ ▼ : Increase or decrease Setting position, telephone
◀ ～ ▶
number and
scan speed 1 step
MENU : Edit DSC message / Response/ Relay/ View, set up the system.
0.
1.
2.
3.
DISTRESS CAL EDIT : Edit & transmit DSC distress message.
ALL SHIP CAL EDIT : Edit and transmit DSC all-ship-call message.
INDIVIDUAL CALL EDIT: Edit and transmit DSC individual call message.
AUTO/SEMI CAL EDIT : Edit and transmit message of automatic or
semi-automatic connection to public telephone.
4. DISTRESS RELAY
: View and relay the received DSC distress message.
5. GROUP CALL EDIT
: Edit and transmit call-message for group-vessel.
6. DISTRESS MSG RELAY : View, relay, edit and transmission on receiving
of distress-message
7. DISTRESS MSG ACKG : Acknowledgement of view and response
on receiving of distress-message
8. OTHER MSG ACKG : Response on other received message
(except distress message)
9. RX DISTR MSG VIEW : View and print out for receiving of distress message
and full transmission message
10. RX OTHER MSG VIEW : View and print out other received message
11. SYSTEM SETTING : Set SELF-ID(its own address), time and date,
auto-acknowledge, scan mode, etc
12. SYSTEM SELF TEST : SELF TEST, view version of program, initialization of
system, etc.
13.GEOGRAPHIC
-3-
STR-580D
SAMYUNG ENC
MODE FUNCTION of HAND SET (
after press
press〔
〔MODE〕
MODE〕key )
〔INT〕: Selecting ITU frequency
〔USA〕: Selecting USA frequency
〔LGT〕: Increase bright of LCD indication and keyboard BACK-LIGHT 1 step to
step to bright direction
〔25w〕: Selecting transmitting output to 25W
〔1W〕: Selecting transmitting output to 1W
〔DIM〕: Decrease light of LCD indication and keyboard BACK-LIGHT 1 step to
4 step to dark direction
〔SP.O〕: Abbreviate of speaker on
〔SP.X〕: Abbreviate of speaker off
〔DIAL〕: While SCAN, in case of having received input-signal, quit.
Continue next channel
〔SCAN〕: Scan full channel and select monitor function
〔DIAL〕: Selecting CH16
-4-
STR-580D
SAMYUNG ENC
INTRODUCTION
1.1 INTRODUCTION
The STR-580D includes DSC/VHF radiotelephone and DSC watchkeeping receiver required by
the Global Maritime Distress and Safety System(GMDSS). It is designed to be compact and
lightweight for easy installation in any ship of 100 gross tons or more, as well as in
conventional ships ( all passenger and cargo ships of over 300 gross tons engaged in
international navigation).
The STR-580D is equipped with Digital Selective Calling(DSC) functions for distress
calls and routine calls, as well as usual voice communication function.
It incorporates all the necessary units for DSC service , such as the DSC
unit, CH70 watchkeeping receiver, and power supply.
1.2 FEATURES
1.2.1
The STR-580D VHF radiotelephone meets the ITU Radio Regulations, IMO
Performance Standards, and CCIR Recommendations.
1.2.2
The STR-580D VHF radiotelephone covers all channel specified in the
ITU Radio Regulations.
1.2.3
The STR-580D VHF radiotelephone can be easily installed in a
narrower space because all the necessary units, transmitter/receiver,
DSC unit,CH70 DSC
Watchkeeping Receiver and power supply are built in a compact body.
1.2.4
The STR-580D VHF radiotelephone incorporates a large graphic LCD with
wide angle of visibility. The LCD does not limit the place for
installation.
1.2.5
The STR-580D VHF radiotelephone LCD display automatically instructs
the operator's needs, when an item is selected from the menu. This
makes any operation easy, DSC in particular.
1.2.6
The STR-580D VHF radiotelephone can be used with the DPU-414 dedicated
printer or a general purpose printer with CENTRONICS interface.
The connected printer automatically prints out the DSC message transmitted or
received.A message stored in memory can be manually printed out later on.
1.2.7
The brightness of LCD and keypad backlighting is widely adjustable, and
will not disturb a night watch.
-5-
STR-580D
SAMYUNG ENC
1.2.8
In addition to the channels specified by Radio Requlations, The
STR-580D VHF radiotelephone covers USA channels, Weather channels, and
Canadian channels available along the coast of North America. Up to 99 private
channel can also be incorporated. (For the contract of Standard type of
STR-580D).
1.2.9
The STR-580D VHF radiotelephone incorporates memory channels, memory
scanning function of all channels or channel group and dual watching
functions.
These functions are convenient for watching particular channels.
1.2.10 Besides the usual radiotelephone communications, The STR-580D VHF
radiotelephone can communicate distress, urgency, safety and routine
call to use DSC function. When the coast station offers automatic
connection service to public telephone subscribers, the service can be used
by inserting the desired telephone number in the DSC message.
1.2.11 The STR-580D VHF radiotelephone has an interface for
position (latitude/longitude) and time data from a navigation aid such
as GPS. When a distress call is transmitted, position data are
automatically inserted in the message.
In case of receiving call of sea area, the STR-580D VHF
radiotelephone can judge whether self-vessel is or is not in the self
sea-area to be based on position data from a navigation aid such as GPS.
-6-
STR-580D
SAMYUNG ENC
2.BASIC CONFIGURATION
2.1 STANDARD LIST
DESCRIPTION
1.VHF radiotelephone
(main unit)
(1) Mother Board
(2) RX Board
(3) DSC Board
(4) TX Drive
(5) Power supply
(6) Cup Board
MODEL NO.
2.Antenna
3.Antenna
REMARKS
STR-580D
modem
(7) Front keyboard
LCD display
(8 Power filter
(9) TX power AMP
QUANTITY
With handset
V-405
V-400
V-401
V-402
V-404
V-406
V-407
V-408
V-467
SAN-150(RX/TX)
Assembled into
STR-580D
(3dB)
SAN-150(DSC WKR)
(3dB)
4. Instruction manual
5.LCD
DG12232S-2FBLY
6.AC/DC Power Supply
SP-580AD
7.CABLE
VCTF1.25SQ X EC
8.CABLE
VCTF1.25SQ X 4C
1 set
With bracket
1 set
with bracket
1EA
1EA
1set
2EA
1EA
2.2 OPTION
DESCRIPTION
MODEL
REMARK
VHF EMG LIGHT
DC24V / 3W
STAND TYPE
DSC/VHF PRINTER
DPUDPU-414
WITH CABLE
HANDSET
HH-36R
ANTENNA CABLE
RGRG-8UY
BATTERY CABLE
DPYCSDPYCS-2C X 14SQ
AC POWER CABLE
DPYCSDPYCS-2C X 2.0 SQ
-7-
STR-580D
SAMYUNG ENC
3. SPECIFICATION
3.1 STRSTR-580D MAIN UNIT
The STR-580D DSC/VHF radiotelephone has been tested according the IMO
Performance Standard for GMDSS. This equipment corresponds to IMO Resolution
A-803(19) for Shipborne VHF Radio Installation Capable of Voice Communication
and Digital Selective Calling.
3.1.1 General Specifications
Transmission frequency range DUP 156.000-158.000 ㎒
SIMP 156.000-158.000 ㎒
(For special contract : 150.225 ~162.600 MHz)
Reception frequency range
156,000-162.550 ㎒
(For special contract : 150.225 ~162.600 MHz)
CHANNEL capacity
USA/CNA CHANNEL MAX 57CH, ITU CH:MAX 80 CH
PRIVATE CHANNEL MAX 560CH
SCAN MEMORY CHANNEL MAX 10CH
WEATHER CHANNEL (reception only) 9 ch
Channel spacing
25KHz
Communication modes
Simplex and duplex press to talk
(simplex and semi duplex on private channels)
Type of emission
F3E, F2B(G3E, G2B)
Frequency accuracy
Within 10 10-5
Antenna impedance
50ohm
Main controls
Transmitting and stopping distress signals,
transmission and reception channels, transmission
power setting, dimmer, squelch
Main display item
transmission and reception channels, output
power, scan condition, alarm condition, speaker
mode, date, time, position, DSC condition etc.
Rated power supply voltage DC24V (DC18 - 31.2V)
AC110V/AC220V 10%(50/60Hz
6%)
Current consumption
Temperature range for full
performance
Operating temperature range
Storage temperature range
Humidity resistance
Vibration resistance
DC13.6V 25W TRANSMISSION 6A MAX
RECEIVING
1.5A MAX
0.c - +40.c
-15.c - +55.c
-25.c - +65.c
No abnormality after 4 hours in +55., 95%RH
0 - 8.3Hz Full amplitude 3.0mm, 8.3 - 30Hz
full amplitude 1 mm
No abnormality after vibrating for 90
minutes in each of the three axes
-8-
STR-580D
SAMYUNG ENC
Continuous operating
Dimension and weight
No abnormality after operation continuously
for eight hours
216mm(H) 80mm(w) 302mm(D) (excluding projecting parts)
3.1.2 TRANSMITTER
TRANSMITTER UNIT
Antenna output power
Oscillation method
Modulation method
Maximum frequency deviation
Occupied bandwidth
Microphone input impedance
Standard modulation input
Pre emphasis characteristics
Overall distortion
Signal-to-noise ratio
Spurious emission
DSC modulation rate
DSC modulation method
DSC modulation index
Mark signal frequency (Y)
Space signal frequency (Y)
25w +20% - 50%, 0.1 - 1w (reduced output)
Synthesizer method
Frequency modulation
within
5KHz
within 16KHz
600ohm balanced
-53dBm
6dB/oct characteristic +dB, -3dB
10% or less
20dB or more
2.5 ㎶ or less
1200baud
30
10-6
FSK
2 10%
Within 1300Hz
10Hz
Within 2100
10Hz
3.1.3 RECEIVER
RECEIVER UNIT
Receiving system
1 st 1F
2 nd 1F
Local oscillation frequency
Local oscillation method
Sensitivity
Sensitivity (DSC)
Squelch sensitivity
Selectivity
Spurious response
Spurious response(DSC)
Blocking
Blocking(DSC)
Intermodulation
Intermodulation
superheterodyne
21.4MHz
455KHz
Reception frequency - 21.4MHz
Synthesizer method
2 ㎶ or less (20dB N/S)
Symbol error rate at 1 ㎶ is 1 % or less
1㎶ or less
6dB bandwidth : 12 KHz or more
70dB bandwidth : 25KHz or less
80dB or more (20 dB N/S)
Symbol error rate is 1% or less at a wanted
signal level of 3dBU and an unwanted signal
level of 73dBu
90dBu or more (20dBu N/S)
Symbol error rate is 1% or less at wanted
signal level of 3dBu and an unwanted signal
level of 68dBu
70dBu or more (20dB N/S)
Symbol error rate is 1% or less at wanted
signal level of 3dBu and an unwanted signal
level of 68dBu
-9-
STR-580D
SAMYUNG ENC
Overall distortion
Signal-to-noise ratio
Rated audio output
De emphasis characteristics
Radiation
DSC message file
3.1.4
CH70 Watchkeeping Receiver
Receiving frequency
Reception mode
Frequency accuracy
Antenna impedance
Reception method
1 st 1F
2 st 1F
Local oscillation frequency
Local oscillation method
Sensitivity
Selectivity
Spurious response
Blocking
Intermodulation
level of 68dBu
DE-EMPHASIS
Radiation
Version
3.2
10% or less
40kB or more
1 w (8ohm)
6dB/oct, +1dB, -3dB
4000mkW or less
for distress message
:20
for the other messages :20
156.525 MHz (CH70)
F2B(G2B)
Within 10 10-5
50 ohm unbalanced
Double superheterodyne
10.7 MHz
455KHz
145.825MHz
FREQUENCY SYNTHESIZER
Symbol error rate of 1% or less at 1uv
6 dB bandwidth : 12KHz or less
70dB bandwidth : 25KHz or less
Symbol error rate of 1% or less at a wanted
signal level of 3dBU and unwanted signal
level of 73dBu
Symbol error rate of 1% or less at a wanted
signal level of 3dBU and unwanted signal
level of 73dBu
Symbol error rate of 1% or less at a wanted
signal level of 3dBU and unwanted signal
6dB/OCT , +1dB, -3dB
4000 uuW or less
V.SY-VDSC-04-SEP.-99
DPU - 414 PRINTER ( OPTION )
Printing system
Input Interface
Input DATA
letter
Printer paper
Power supply
Weight, measure
Weight
Thermal serial dot system
Convenient CENTRONIX system
8 Bit parallel input
5 dot MATRLX
FH65BU-2 80mm width
DC6.5V 3W MAX. supply from SP-580
165(w) 160(H) 90(D) (m/m) (excluding
projecting parts)
about 1.5Kg
- 10 -
STR-580D
SAMYUNG ENC
3.3
CHANNEL
3.3.1 ITU CHANNEL (INCLUDING RUS CHANNEL)
CH
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
* Channel
TX(MHz)
RX(MHz)
CH
TX(MHz)
RX(MHz)
156.050
160.650
60 156.025
156.100
160.700
61 156.075
156.150
160.750
62 156.125
156.200
160.800
63 156.175
156.250
160.850
64 156.225
156.300
156.300
65 156.275
156.350
160.950
66 156.325
156.400
156.400
67 156.375
156.450
156.450
68 156.425
156.500
156.500
69 156.475
156.550
156.550
70* 156.525
156.600
156.600
71 156.575
156.650
156.650
72 156.625
156.700
156.700
73 156.675
156.750
156.750
74 156.725
156.800
156.800
75
156.850
156.850
76
156.900
161.500
77 156.875
156.950
161.550
78 156.925
157.000
161.600
79 156.975
157.050
161.650
80 157.025
157.100
161.700
81 157.075
157.150
161.750
82 157.125
157.200
161.800
83 157.175
157.250
161.850
84 157.225
157.300
161.900
85 157.275
157.350
161.950
86 157.325
157.400
162.000
87 157.375
157.450
157.450
88 157.425
157.500
157.500
89 157.475
157.550
157.550
90 157.525
157.600
157.600
91 157.575
157.650
157.650
92 157.625
157.700
157.700
93 157.675
157.750
157.750
94 157.725
157.800
157.800
95 157.775
157.850
157.850
96 157.825
157.900
157.900
97 157.875
157.950
157.950
98 157.925
158.000
158.000
99 157.975
70 is available only for DSC.
160.625
160.675
160.725
160.775
160.825
160.875
160.925
156.375
156.425
156.475
156.525
156.575
156.625
156.675
156.725
156.875
156.925
161.525
161.625
161.675
161.725
161.775
161.825
161.875
161.925
161.975
162.025
157.475
157.525
157.575
157.625
157.675
157.725
157.775
157.825
157.875
157.925
157.975
Voice transmissions are prohibited
Transmission power is fixed at 25w
* Channel 75 is the guard band for channel 16.
Transmission on this channel is prohibited
* Channel 76 is available only for NBDP Voice transmission is prohibited.
- 11 -
STR-580D
SAMYUNG ENC
3.3.2
USA CHANNEL
CHANNEL
CH
TX(MHz)
RX(MHz)
CH
TX(MHz)
RX(MHz)
01A
02A
03A
04A
05A
06
07A
08
09
10
11
12
13*
14
15*
16A
17*
18A
19A
20
21A
22A
23A
24
25
26
27
28
156.050
156.150
156.200
156.250
156.300
156.350
156.400
156.450
156.500
156.550
156.600
156.650
156.700
156.800
156.850
156.900
156.950
157.000
157.050
157.100
157.150
157.200
157.250
157.300
157.350
157.400
156.050
156.100
156.150
156.200
156.250
156.300
156.350
156.400
156.450
156.500
156.550
156.600
156.650
156.700
156.750
156.800
156.850
156.900
156.950
161.600
157.050
157.100
157.150
161.800
161.850
161.900
161.950
162.000
60
61
62
63A
64
65A
66A
67*
68
69
70*
71
72
73
74
75*
76*
77*
78A
79A
80A
81A
82A
83A
84
85
86
87
88A
156.175
156.275
156.325
156.375
156.425
156.475
156.525
156.575
156.625
156.675
156.725
156.825
156.875
156.925
156.975
157.025
157.075
157.125
157.175
157.225
157.275
157.325
157.375
157.425
160.625
160.675
160.725
156.175
160.825
156.275
156.325
156.375
156.425
156.475
156.525
156.575
156.625
156.675
156.725
156.825
156.875
156.925
156.975
157.025
157.075
157.125
157.175
161.825
161.875
161.925
161.975
157.425
* Transmitting power of channel 13 and 67 is set to 1 W, but can be converted
using 25/1 key.
* Transmitting power of channel 17 and 77 is fixed at 1w
* Ship are prohibited from transmitting on channel 15.
* Channel 75 is the guard band for channel16,
Therefore, Voice transmission on this channel is prohibited
* Channel 70 is available only for DSC. Therefore,
Voice transmission on this channel is prohibited.
Transmission power of channel 70 is fixed at 25W
* Channel 76 is availble for NBDP. Therefore, Voice transmission is
prohibited.
- 12 -
to 25W
STR-580D
SAMYUNG ENC
3.3.3 CANADA CHANNEL
CH
TX(MHz)
RX(MHz)
CH
TX(MHz)
RX(MHz)
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
156.050
156.100
156.150
156.200
156.250
156.300
156.350
156.400
156.450
156.500
156.550
156.600
156.650
156.700
156.750
156.800
156.850
156.900
156.950
157.000
157.050
157.100
157.150
157.200
157.250
157.300
157.350
157.400
160.650
160.700
160.750
160.800
160.850
156.300
160.950
156.400
156.450
156.500
156.550
156.600
156.650
156.700
156.750
156.800
156.850
161.500
161.550
161.600
161.650
161.700
161.750
161.800
161.850
161.900
161.950
162.000
60C
61C
62C
63
64C
65
66
67
68
69
70*
71
72
73
74
75*
76*
77
78
79
80
81
82
83
84
85
86
87
88
156.025
156.075
156.125
156.175
156.225
156.275
156.325
156.375
156.425
156.475
156.525
156.575
156.625
156.675
156.725
156.825
156.875
156.925
156.975
157.025
157.075
157.125
157.175
157.225
157.275
157.325
157.375
157.425
156.025
156.075
156.125
160.775
156.225
160.875
160.925
156.375
156.425
156.475
156.525
156.575
156.625
156.675
156.725
156.825
156.875
161.525
161.575
161.625
161.675
161.725
161.775
161.825
161.875
161.925
161.975
162.025
3.3.4
WEATHER CHANNEL
CH
RX(MHz)
162.550
162.400
162.475
161.650
162.425
162.450
162.500
162.525
161.775
- 13 -
STR-580D
SAMYUNG ENC
4. OPERATION
4.1 TURNING THE POWER ON
Press POWER on the front panel.
When the power isn't turned, turn on the toggle switch of main unit for power.
4.2 BASIC OPERATING
4.2.1 Flow chart between mode by key
key operation
power
STATUS MODE
PRI
PRIVATE CHANNEL MODE
MEM
MEMORY CHANNEL MODE
CH NO
EACH MODE
CH16
WEATHER CHANNEL MODE
SCAN
SCANNING MODE
CH70 STATUS MODE
CH16
CH70
DISTRESS
MENU
PRESSFOR
FOR5SEC
5SEC
PRESS
DISTRESS MESSAGE
TRANSMISSION
DSC MENU SELECT MODE
CLR
CLR
OR
CH16
POWER
OFF
POWER OFF
- 14 -
STR-580D
SAMYUNG ENC
POWER ON
STATUS DISPLAY (TELEPHONE MODE)
PRIVATE CH
CH
SCAN MEMORY
SCAN MEMORY
WEATHER CH
SCAN
MENU
0. DISTRESS CAL EDIT
1. ALL SHIP CAL EDIT
2. INDIVIDL CAL EDIT
3. AUT/SEMI CAL EDIT – (FUNC + ENT) TEL NO. REGISTRER
4. GEOGRAPH CAL EDIT
5. GROUP CALL EDIT
6. DISTRESS MSG RELY – (FUNC + ENT) DISTRESS MESG MAKE
MAKE
7. DISTR MSG ACKG
8. OTHER MSG ACKG
9. RX DISTRESS MSG VIEW – (FUNC + ENT) TX STORE MESSAGE VIEW
10. RX OTHER MSG VIEW
11. SYSTEM SETTING
0. DSCDSC-ID : 000000000
1. GRPGRP-ID : 000000000
2. DSCDSC-MA : OFF
3. DSCDSC-TM : 14:00
4. DSCDSC-PO : N35. 05E129.02
5. DSCDSC-AK : OFF
6. DATE : 1999.06.24
1999.06.24
7. TIME : 12:00
8. SCAN : ALL SCAN
9. ALRM : ON
12. SYSTEM SELF TEST
0, SPAC SIG TX (OFF)
1. MARK SIG TX (OFF)
2. DOT SIG TX (OFF)
3. LOOP BAK SW (OFF)
4. DISTRESS KEY TEST
5. LINE PRINTER TEST
6. PROGRAM VERSION
7. DISPLAY DEV TEST
8. SYSTEM INIT CLEAR
CLEAR
9. ALL SYSTEM TEST
10. LOOP BAK DSC TEST
11. TX POWER(25W) TEST
- 15 -
STR-580D
SAMYUNG ENC
4.2.3 Description of keys, knob and lamps
< FUNCTION of THE KEYS >
CH16 Press this key to select CH16
* Switch from other channel or the call mode of DSC mode to telephone mode.
25W/1W key : Switches transmitting power between 25w and 1w
* The clear telephone is available on 1w transmission of duplex when short distance
PRI Used for selection of private channel 01 - 99
(1) Press this key in the CH16 status mode
(2) Change Channel mode into "PRI" and the prompt displays for entering of CH No.
(3) Press channel No. in two digit using the number keys.
DUAL Switches the channel between the currently selected channel and CH16
(1) Select any other channel but CH 16
(2) Press this key at current status
(3) Switches alternatively the channel between the currently selected channel and CH-16
(4) Dualscan speed is changeable using 〔FUNC〕+〔▲〕,〔FUNC〕+〔▼〕
(5) It will stop scanning when received a signal during scanning. press
〔*〕KEY, then restart scanning after clear off stop condition.
SPEAKER Turn the speaker on or off
(1) Handset receiver is always connected regardless of this key.
DIM Brighten or dim LCD backlight
(1) Adjust brightness of the LCD INDICATION and KEYBOARD BACKLIGHT using this key in
2 steps of brightness
(2) Whenever this key is pressed , dim-out and dim-up turn alternatively
(3) It is useful at night
- 16 -
STR-580D
SAMYUNG ENC
SCAN Start or stop Channel scan
⑴ Press 〔 MENU 〕key in the CH16 status screen.
⑵ Place cursor on "11. SYSTEM SETTING" using 〔▲〕,〔▼〕key and press 〔ENT〕
⑶ Place cursor on "8 SCAN : ????????" using 〔▲〕,〔▼〕key and press 〔ENT〕
then select a scan mode among the ALL SCAN/MEM SCAN/GRP SCAN using 〔ENT〕
⑷ Return CH16 status screen using 〔CLR〕 or CH16
⑸ Press 〔SCAN〕. Scan mode at present appears on the screen and scanning
starts
⑹ Scanning speed can be adjusted using 〔 FUNC〕+〔▲〕, 〔FUNC〕+〔▼〕
⑺ If signal is received on the channel during the scan, scanning pauses.
Press the 〔 * 〕 key to continue scanning successively.
⑻ When the 〔SCAN〕key is pressed again, scanning comes to a stop and "_ _ _"
appears on scan mode.
ON/OFF Turn the system on or off
⑴ Press(about 1sec) this key to turn on the system.
⑵ Previous CH(Chanel) status screen appears on LCD after power on.
CH70 Select CH 70 for DSC mode ( voice transmission is prohibited)
CTRY Select the region (ITU, USA or CAN)
DISTRESS Transmits distress message
.(*Never press this key except in an emergency)
⑴ Strip the cover over the〔DISTRESS〕Key by pulling up
⑵ Press this key for 5sec to 10sec to transmit distress call
DISABLE Disable alarm sound
⑴ Disable audible alarm when receiving DSC calls
⑵ This key is valid only when the CH16 status screen is displayed.
CLR Terminates DSC call / Stops alarm sound / Returns to previous menu
⑴ Stop DSC call transmission
⑵ Stop alarms
⑶ It is also used to return to the previous screen.
⑷ Initialize system memory.
- 17 -
STR-580D
SAMYUNG ENC
MEMO Register channel for "Memory scan" and "Group scan"
⑴ Press 〔 MEM 〕key to open "MEMORY CHANNEL EDIT" screen. On this screen,
first 0-9 items is for memory scan, next 10-11 items are for group scan. Each item
consists of channel mode(ITU, USA, CNA, PRI, WTR) and channel number
⑵ Enter channel mode using 〔 COUNTRY 〕 〔 PRI 〕〔 WX 〕key and Enter
channel number in 3 digit using number keys
⑶ Memory scan is effective when at least two memory channel is selected
⑷ Group scan is effective when two channel (start channel, end channel) is selected.
⑸ Edited memory channel is not erased from memory even though the system turns off.
⑹ To stop editing memory channel and return to CH16, Press 〔 CLR 〕Key.
MENU Edit, Acknowledge, Relay and View DSC message / Configure system setup
0. DISTRESS CALL EDIT
: Edit and transmit DSC distress message
1. ALL SHIP CALL EDIT
: Edit and transmit DSC all ship call message
2. INDIVIDUAL CALL EDIT : Edit and transmit DSC individual call message
3. AUT/SEMI CALL EDIT : Edit and transmit message of automatic or
semi-automatic connection to public telephone
4. GEOGRAPH CAL EDIT
: Edit and transmit call-message based on position
5. GROUP CALL EDIT
: Edit and transmit group call message(for group vessel)
6. DISTRESS MSG RELY
: View ,relay, edit and transmit distress alarm message
7. DISTRESS MSG ACKG : Transmission of view and response for distress alarm message
8. OTHER MSG ACKG : Reply for other received message (except distress message)
9. RX DISTR MSG VIEW : View and print out received DSC distress message
10. RX OTHER MSG VIEW : View and print out other received DSC
message.
11. SYSTEM SETTING : Set self-ID, time and date, auto-acknowledge, scan mode, etc.
12. SYSTEM SELF TEST : Test printer, view version of program , initialization of system
etc.
PRINT Print out the received DSC message
⑴ Select "9. RX DISTR MESSAGE VIEW" or "10 RX OTHER MESSAGE VIEW by using 〔 ENTER〕key.
⑵ If there is no received DSC message, it is meaningless to select the item even which
cannot be selected.
⑶ Select one among the received DSC message using 〔◀〕〔▶〕key and〔 ENTER〕key
⑷ When pressed this key on DSC MESSAGE VIEW screen, it can print the received message.
- 18 -
STR-580D
SAMYUNG ENC
CALL Transmit the edited DSC message
⑴ Press this key to transmit the message edited at DSC-message-edit screen
⑵ The message edited at “DISTRESS CALL EDIT” can be transmitted only using
〔DISTRESS〕key
⑶ For example, this is the procedure of individual call
① Press {MENU key on the CH16 status screen
② Select the “2 INDIVIDUAL CALL EDIT” by using [▲] [▼] key,{ENTER} key.
The “INDIVIDUAL CALL EDIT” screen appears on LCD.
---Æ Select ‘
ADDRESS ’and input ID number of station in nine digits for reception.
---Æ Select "CATGRY”and input call content
---Æ Select "TEL_CI " and input wanted communication method
---Æ Select "TEL_C2" (R????T????) and input wanted communication channel
---Æ Select "EOS_CM : ACK ??”and input response-method(usually " ACK RQ")
---Æ Press 〔CALL〕key to transmit edited message
(4) When received the acknowledgement, view the acknowledgement message and press
[press]
ENT To use this key for selecting item and confirming to input the edited value into
the system.
(1) Press this key to select item after locating the cursor to wanted item among
DSC menu by using 〔▲〕〔▼〕key.
(2) When editing telephone number, press this key to settle the inputted
number in the system.
(3) Above rules are applicable to all other screens.
＃
The same function as 〔ENT〕KEY
＊
It is a key to clear off inputting standby receiving signal while in scanning.
(1) If there is a channel to perceive receiving signal while in scanning, it will be
suspended and remain as a standby status until receiving signal disappears
(2) In this time, if pressed 〔 * 〕key, it will be moved to next channel and keep going
on scanning ignoring that channel.
(3) If there is any channels where received signal is input again, it stops again.
- 19 -
STR-580D
SAMYUNG ENC
To select CHANNEL and input the number.
(1) When selected channel, private channel should be input in 3 digit, and other channels
should be input in 2 digit.
(2) For example, to select channel 16, press〔1〕--- >〔6〕 in sequence
(No need to input [ENTER] KEY)
↑~↓
To set POSITION direction, TELEPHONE NUMBER, SCAN SPEED,
←~→
Increase or Decrease CHANNEL NUMBER by one STEP by one step
(1) In case of inputting position manually, or setting NS/EW direction and calling
registered telephone number at telephone connection edit screen.
(2) To adjust the scan speed in three steps using [FUNC]+[×], [FUNC]+[Ø]KEY.
<>
(1) SQUELCH KNOB
: To make SQUELCH adjustment using SQL KNOB in controller
(2) VOLUME KNOB
: To adjust speaker volume when speaker is on
(3) CALL LAMP
: Turned it on when transmitting the DSC call message.
(4) CH70 LAMP : Turned it on when the DSC call channel set at other than channel 70
(5) DISTRESS LAMP
: Turned it on when receiving the DSC distress call
(6) OTHERS LAMP
: Turned it on when receiving the DSC call except distress call
(7) POWER LAMP
: Turned it on when power supply is on
- 20 -
STR-580D
SAMYUNG ENC
4.2.4
HOW TO OPERATING
OPERATING HAND MIC (For standard contract)
When transmitting, press PTT SWITCH and then communicate.
SIMPLEX communication is transmitted (ON) if press PTT.
SIMPLEX communication is received(OFF) if release PTT.
DUPLEX communication can be received and transmitted if press PTT SWITCH
simultaneously
＊Note) While protection channel and scanning are in operation, PTT SWITCH does
not operate
＊Note) Under PTT SWITCH ON (transmtting), The function of KEY BOARD is
not operated.
＊Note) When required by special contract, hand set is available.
4.2.5
TELEPHONE MODE(Namely
MODE(Namely : CH16 Screen)
Screen)
- 21 -
STR-580D
SAMYUNG ENC
* When input the channel, it should be input in 3 digit(ex:001) at PRI Mode, and for
other channel, it should be input in two digit (ex:01).
ITU
SIM
25W
ITU
SIM
25W
16
SPK
ALL
SS-2
123
SPK
ALL
SS-2
(1) CHANNEL MODE
* ITU
* USA
* CNA
* PRI
* WTR
......Where there is
...... Where there is
...... Where there is
...... Where there is
...... Where there is
ITU CHANNEL selected.
USA CHANNEL selected.
CANADA CHANNEL selected.
PRIVATE CHANNEL selected.
WEATHER CHANNEL selected.
(2) TELEPHONE MODE
Be changed by select CHANNEL.
* SIM ...... SIMPLEX MODE is selected in TELEPHONE MODE.
* DUP ...... DUPLEX MODE is selected in TELEPHONE MODE.
(3) Transmitting output MODE
When pressed 25W/1W KEY,
* 25W ...... Output power supply is selected to 25W.
* 1W ...... Output power supply is selected to 1W.
* 25W ... Indicating in transmit with 25W.
* 1W .... Indicating in transmit with 1W.
(4) SPEAKER MODE
- 22 -
STR-580D
SAMYUNG ENC
When pressed SPK KEY,
* SPK ......Status being SPEAKER on.
* ___ ...... Status being SPEAKER off.
(5) SCANNING MODE
When pressed SCAN KEY,
* ____ ...... SCANNING MODE is OFF.
* GRP ...... Status in the process of scanning Group CHANNEL.
* ALL ...... Status in the process of SCANNING ALL CHANNEL.
* MEM ...... Status in the process of SCANNING MEMORY CHANNEL.
When DUAL KEY is pressed
* DUL ---- Receiving the current channel and CH16 reciprocately.
(6) SCANNIGN Speed MODE
When pressed FUC+ × or Ø key,
*To be displayed as S-1, S-2, S-3
4.2.6
REGISTRATION OF SCAN MEMO CHANNEL
(1) When pressed [MEMO]KEY IN TELEPHONE MODE, be displayed registration screen.
-- MEMO SCAN EDT --------------[0]
--------------[0]
0. MEM 0 :
ITU CH 005
USA CH 019
1. MEM 1 :
CH
2. MEM 2 :
3. MEM 3 :
CH
CH
4. MEM 4 :
CH
5. MEM 5 :
CH
6. MEM 6 :
CH
7. MEM 7 :
CH
8. MEM 8 :
CH
9. MEM 9 :
CH
10. MEM S :
CH
11. MEM E :
(2) MEM 0--MEM 9 represents MEMO SACN CHANNEL, MEM S and MEM E represents Start or
End of GROUP SCAN channel .
(3) Select CHANNEL MODE of ITU,USA,CNA,WTR,PRI by using [CTRY],[PRI]KEY and input
- 23 -
STR-580D
SAMYUNG ENC
CHANNEL NUMBER by using a numeral key.
※ 1. All CHANNEL number have to be input in 3 digit.
2. WEATHER CHANNEL(WTR) can be used from 001 through 009 (001 009) only.
3. PRI CHANNEL can be used up to 560 only.
4.2.7
SCANNING
(1) Select one of ALL/SCAN / MEM SACN / GRP SCAN / in chapter 8 of item [11.SYSTEM
SETTING] after pressing [MENU ITEM SEL] key in screen (basic: ALL SCAN).
-- SYSTEM SETUP -------------- [O]
6. DATE
: 1999.07.01
: 13:39
7. TIME
: ALL SCAN
8. SCAN
(2) Return to CH16 screen ( Using CLR KEY or CH16 KEY), and press “SCAN” key, then
switching to the currently scanned and showing SCAN MODE(ALL/MEM/GRP).
(3) Indicating the scan speed set presently.
zIf user want to adjust SCAN speed, use [FNC]+[×] or [FNC]+[Ø] KEY.
The higher the figure is, the scan speed will be more faster.
(Changeable by 3 steps with S-1, S-2, S-3 )
MOD
ALM
PWR
19
SPK
SPD
DUL
(4) Where there is any channels which perceives receiving signal while in scan, it
will be the status of stoppage in scanning.
At that time, if pressed [*]KEY, it will keep on scanning after shifted the next
CHANNEL.
(5) If pressed [SCAN]KEY once again, indicate “----“ as SCAN mode and terminate scanning
completely.
4.3
HOW TO OPERATE AS PER THE PURPOSE
- 24 -
STR-580D
SAMYUNG ENC
4.3.1
STANDSTAND-BY RECEPTION
(1) When pressed [ON/OFF] KEY, be turn on power to main unit and then “TELEPHONE
MODE” be displayed on LCD SCREEN.
(2) Adjust VOLUME NOB for receiving sound to be comfortable.
(3) Become the status of stand-by reception for receiving CH16.
(4) It will stop the receiving noise when turning SQUELCH NOB clock-wise direction.
Set the position of SQUELCH NOB slightly right side from the position to stop
such noise.
(5) For channels other than CH16, select the purposed Channel by using [digit]KEY
or [×]/[Ø]KEY.
4.3.2
COMMUNICATION
(1) In case of calling or responding to the call, holding up the handset and set
the purposed Channel. Transmitting output power is 25W unless otherwise
designated.
When pressed PTT BUTTON of HANDSET, it indicates the transmit status in LCD
Screen by converting into PWR:25W. It is then available to communicate.
(2) When taken off PTT of HANDSET, it will become receiving status with turning off
conversion sign.
- 25 -
STR-580D
SAMYUNG ENC
4.4 DIGITAL SELECTIVE
SELECTIVE CALL MODE
4.4.1 TAKE A CAUTION IN KEY OPERATION
Testing a distress call will cause a great disaster to the nearby ships and search
and rescure center that should not be done.
Once DSC call is activated, it sounds alarm from speaker and message will be
transmitted when taken hands off the switch after 5 10 seconds.
You may stop mis-transmitter, if press out hand from 〔DISTRESS〕KEY while 5sec.
Signal can't be stopped during transmission even if stopping operation executed
because signal speed is so fast, therefore careful attention should be made.
4.4.2 TRANSMISSION
TRANSMISSION OF DISTRESS CALL
Distress message will be transmitted when pressing 〔DISTRESS〕KEY for 5sec～
10sec.
It takes precedence in treating Distress Call over other function, and alert sound
be output from speaker.
Distress Message will be automatically transmitted following
transmit from no-modulation CARRIER.
Message is transmitted 5 times continuously and after then transmitted continuously
at an interval between 3.5 min 4.5 min until response comes.
Position data is input automatically when navigation equipment was connected.
(Notice : Said position information will be disregarded after 24 hours from inputting
time) If DSC_MA is ON or DSC_MA is off without connecting to GPS and then exceeding
the set time, time and position data will be transmitted without message.
POSITION : 999999999
--------------- In case of no INFORMATION -> TRANSMIT
DIST-UTC = 8888
4.4.3 RECEIVING
RECEIVING DISTRESS CALL
1. When receiving DISTRESS CALL by DSC, Distress and Others alert lamp in the Panel
will be on. At the same time, alert sound will be output from speaker “bbi ppo
bbi ppo” Press (CLR) KEY to stop alerting.
2.
Fist 3 (three) messages is displayed in LCD including Distress Calling Message
from Transmitting.
3. Received DISTRESS MESSAGE can be automatically stored/recorded up to 20 numbers
in the memory component of main unit, so user may identify the next message.
Transmitted/Received message by DIGITAL DSC can be output from printer
automatically through connecting with printer. Stored receiving message in memory
can also be checked.
- 26 -
STR-580D
SAMYUNG ENC
4.4.4 SCREEN COMPOSITION AND DEFINITION OF TERM
TERMINOLOGY
INOLOGY
(1) Visual items in “MENU ITEM SEL” screen is three items at one but the composition
of overall display is as follows.
-- MENU ITEM SEL --------------[0]
--------------[0]
0. DISTRESS CAL EDIT
1. ALL SHIP CAL EDIT
2. INDIVIDL CAL EDIT
3. AUT/SEMI CAL EDIT
4. GEOGRAPH CAL EDIT
5. GROUP CALL EDIT
6. DISTRESS MSG RELY
7. DISTRESS MSG ACKG
8. OTHERS
MSG ACKG
9. RX DISTR MSG VIEW
10. RX OTHER MSG VIEW
11. SYSTEM SETTING
12. SYSTEM SELF TEST
(2) If shifted by [×]/[Ø]KEY at DSC MESAGE edit Screen, 'No select [X]/
select [0]’ located in Light-top side is converted. [X] means 'no select' and
[0] means 'select' will be available.
-- INDV CALL EDT --------------[X]
--------------[X]
FORMAT : INDIVIDL
ADDRES : 123456789
CATGRY : ROUTINE
-- INDV CALL EDT
EDT --------------[0]
--------------[0]
FORMAT : INDIVIDL
ADDRES : 123456789
CATGRY : ROUTINE
(3) Item to select : Move by [× ]/[Ø]KEY at display and press [ENT]KEY,
that means 'select current item'.
(4) CAL_CH : Setting except CH70 is possible. because of not DSC,
use CH70 normally.
- 27 -
STR-580D
SAMYUNG ENC
(5) Change of [N OF D],[TEL_CM],[CATGRY],[TEL_C1],[TEL_C2] by [ENT]KEY is listed
right side of screen. When selecting one of them, the selected item will be input.
-- INDV CALL EDT --------------[0]
--------------[0]
FORMAT : I ROUTINE
ADDRES : 1 SHIPS BUSI
CATGRY : R SAFETY
URGENCY
DISTRESS
(6) The way how to input position (latitude/longitude) is to press [ENT]KEY at the
wanted item which is standby status. When latitude input is completed, cursor
moves to the longitude input and remain as standby status for inputting.
Decimal point is already displayed.
Change of latitude (N/S) by [×]/[Ø]KEY at the appropriate position.
Change of longitude (E/W) by [Ö]/[Õ]KEY at the appropriate position.
latitude and longitude is canceled by pressing [CLR] KEY
after CANCEL, cursor goes ahead.
3 → 5 → 4 → 1
LONGITUDE 139.34 : 1 → 3 → 9 → 3 → 4
(EX) LATITUDE 35.41
-- DIST CALL EDT --------------[0]
--------------[0]
SIP_ID : 111111111
N OF D : UNSIGN DIT
POSION : N__.__E___.__
(7) Like ‘01/03’ figure is displayed at received message RELAY, ACKNOWLEDGE and VIEW
Screen at Right top side of screen, that means number of received message is 3
in total and current confirming message is the first one.
That can be checked by [Ö]/[Õ]KEY.
- If there is no received message, this item is not selected.
-- OTHR VIEW ----------- 01/03 [X]
FORMAT : INDIVIDL
ADDRES : 123456789
CATGRY : SAFETY
4.4.5 EDIT DISTRESS MESSAGE AND CALL
- 28 -
STR-580D
SAMYUNG ENC
(1) Select [0.DISTRESS CAL EDIT] on [MENU ITEM SEL] screen.
-- MENU ITEM SEL --------------[
--------------[O]
0. DISTRESS CAL EDIT
1. ALL SHIP CAL EDIT
2. INDIVIDL CAL EDIT
-- DIST CALL EDT --------------[X]
--------------[X]
FORMAT : DISTRESS
SIPSIP
-ID : 111111111
N OF D : UNSIGN DST
(2) Select 'N OF D' item (Nature Of Distress ) and insert the desired contents.
-- DIST CALL EDT --------------[0]
--------------[0]
FORMAT : D FIRE
SIP_ID : 1 FLOOD
N OF D : U COLLISION
GROUND
LIST
SINK
ADRFT
UNSIGN DST
ABANDON
PIRACY
MAN OVERBOD
(3) Select 'POSION' item (distress Position) and input the position of latitude and
longitude.
When GPS device is connected, this item is input automatically
When '2.DSC-MA:ON' of [MENU ITEM SEL] -> [11.SYSTEM SETTING] is set
the coordinates (position) of ‘4.POS:N??.??E???.??' is set automatically.
-- DIST CALL EDT --------------[0]
--------------[0]
SIP_ID : 111111111
N OF D : UNSIGN DIT
POSION : N__.__E___.__
(4) Select 'TIME_U' item (Time_UTC) and input the distress time by 24 hours.
- 29 -
STR-580D
SAMYUNG ENC
When GPS is connected, this item is inserted automatically.
'2.DSC-MA:ON' of [MENU ITEM SEL] -> [11.SYSTEM SETTING] is set up, the time
value of ‘3.DSC-TM:??:??' is inserted automatically.
-- DIST CALL EDT --------------[0]
--------------[0]
N OF D : UNSIGN DIT
POSION : N35.05E129.02
TIME_U : __:__
(5) Select 'TEL_COM' item( Tele-Command ) and insert desired contents.
-- DIST CALL EDT --------------[0]
--------------[0]
POSION : N G3E SIM TEL
TIME_U : 1
TEL_COM: G
G3E DUP
DUP TEL
J3E TEL
H3E TEL
F1B/J3B FEC
F1B/J2B ARQ
F1B/J2B REC
F1B/J2B TTY
NO INFOMATN
(6) When pressed [DISTRESS] KEY for over 5sec through 10sec, it will be output from
the SPEAKER.
Distress Message will be transmitted following no-modulation
CARRIER is transmitted.
The message is transmitted 5 times consecutively, and then transmitted
continuously at interval of 3.5 to 4.5 minutes.
4.4.6 EIDT ALL SHIP MESSAGES AND CALL
- 30 -
STR-580D
SAMYUNG ENC
(1) Select
[1.ALL SHIP CAL EDIT] item on [MENU ITEM SEL] screen.
-- MENU ITEM SEL --------------[0]
--------------[0]
0. DISTRESS CAL EDIT
1. ALL SHIP CAL EDIT
2. INDIVIDL CAL EDIT
-- ALLS
FORMAT
CATGRY
CALL EDT ---------------------------[X]
-----------[X]
: ALL SHIP
: SAFETY
SIP_ID : 111111111
(2) Select 'CATGRY' item ( Category ) and input the desired contents.
-- ALLS
FORMAT
CATGRY
CALL
: A
: S
SIP_ID : 1
EDT --------------[0]
--------------[0]
SAFETY
URGENCY
DISTRESS
(3) Select 'TEL_C1' item( Tele-Command 1 ) and input the desired contents.
-- ALLS CALL EDT --------------[0]
--------------[0]
CATGRY : S G3E SIM TEL
SIP_ID : 1 G3E DUP TEL
TEL_C1 : G
POLLING
UNABLE COMP
DATA MODEM
J3E TEL
H3E TEL
F1B/J2B FEC
F1B/J2B ARQ
F1B/J2B REC
F1B/J2B TTY
A1A RECORD
SHIP POSON
- 31 -
STR-580D
SAMYUNG ENC
(4) Select 'TEL_C2' item ( Tele-Command 2 ) and input the desired contents.
-- ALLS CALL EDT --------------[0]
--------------[0]
SIP_ID : 1 RE18 SIP/PL
TEL_C1 : G MEDICAL TRN
TEL_C2 : N
TEL PUB OFS
NO INFOMATN
(5) Select 'MSG' item ( Message 2 ), and after selecting type of Message2
(EX:V.H.F CHAN), input in accordance with an appropriate standards.
(Note!!: Don't set the channel such as CH70, CH75, CH76 for special usage.)
-- ALLS CALL
TEL_C1 : G
TEL_C2 : N
MSG : R___
EDT --------------[0]
--------------[0]
V.H.F CHAN
MF/HF CHAN
MF/HF FREQ
SHIP COORD
-- ALLS CALL EDT --------------[O]
--------------[O]
TEL_C1 : G3E SIM TEL
TEL_C2 : NO INFOMATN
MSG : R____T____ VHF
(6) Completed MESSAGE edit, press [CALL]KEY then the MESSAGE is transmitted
one time.
- 32 -
STR-580D
SAMYUNG ENC
4.4.7 EDIT INDIVIDUAL / GEOGRAPH / GROUP MESSAGE AND CALL
(1) Select one among [2.INDIVIDL CAL EDIT] / [4.GEOGRAPH CAL EDIT ]
/ [5. GROUP CALL EDIT ] on the [MENU ITEM SEL] screen.
-- MENU ITEM
0. DISTRESS
1. ALL SHIP
2. INDIVIDL
-- INDV
FORMAT
ADDRES
CATGRY
SEL ---------------------------[0]
[0]
CAL EDIT
CAL EDIT
CAL EDIT
CALL EDT --------------[X]
--------------[X]
: INDIVIDL
: 000000000
: ROUTINE
(2) [INDIVIDL] : Select 'ADDRES' item, and input the ID number of responding
station in call.
Initial setting is 000000000.
ex) 4→8→3→1→9→2→6→5→7
-- INDV
FORMAT
ADDRES
CATGRY
CALL EDT --------------[O]
--------------[O]
: INDIVIDL
: _________
: ROUTINE
[GEOGRAPH] : Select 'PTY_ID' item, and input the value of sea area positioned
responding station.
Initial value is N00E000X00Y00.
ex) [3]→[5]→[1]→[2]→[9]→[1]→[5]→[1]→[0]
-- GRPH
FORMAT
PTY_ID
CATGRY
CALL EDT --------------[O]
--------------[O]
: GEOGRAPH
: N__E___Y__X__
: ROUTINE
- 33 -
STR-580D
SAMYUNG ENC
N(S)35
15
E(W)129
call area
10
[GROUP] : Select 'GRP_ID' item( responding station GROUP ID ) and input GROUP ID
Initial value is 000000000.
(4) Select 'CATGRY' item( Category ) and input the desired contents.
-- INDV CALL EDT --------------[0]
--------------[0]
FORMAT : I ROUTINE
ADDRES : 1 SHIPS BUSI
CATGRY : R SAFETY
URGENCY
DISTRESS
(5) Select 'TEL_C1' item( Tele-Command 1 ) and then input desired contents.
-- INDV CALL EDT --------------[0]
--------------[0]
CATGRY : R G3E SIM TEL
SIP_ID : 1 G3E DUP TEL
TEL_C1 : G POLLING
UNABLE COMP
DATA MODEM
J3E TEL
H3E TEL
F1B/J2B FEC
F1B/J2B ARQ
F1B/J2B REC
F1B/J2B TTY
A1A RECORD
SHIP POSON
A1A KEY
F1C/F2C/F3C
INFOMATN
NO IN
FOMATN
- 34 -
STR-580D
SAMYUNG ENC
(6) Select 'TEL_C2' item( Tele-Command 2 ) and then input desirable contents.
-- INDV CALL EDT --------------[0]
--------------[0]
SIP_ID : 1 RE18 SIP/PL
TEL_C1 : G MEDICAL TRN
TEL_C2 : N TEL PUB OFS
NO INFOMATN
(7) Select 'MSG' item( Message 2 ), after selecting the type of Message2 (ex:V.H.F CHAN)
according to an appropriate standard. Don't set special using CHANNEL CH70, CH75,
CH76.
-- INDV CALL
TEL_C1 : G
TEL_C2 : N
MSG : R___
EDT --------------[0]
--------------[0]
V.H.F CHAN
MF/HF CHAN
MF/HF FREQ
SHIP COORD
-- INDV CALL EDT --------------[O]
--------------[O]
TEL_C1 : G3E SIM TEL
TEL_C2 : NO INFOMATN
MSG : R____T____ VHF
(8) Select 'EOS_CM' item( End of Sequence Command ) and input desired contents.
This is for [2.INDIVIDL CAL EDIT] item only.
-- INDV CALL EDT --------------[0]
--------------[0]
MSG : R006 ACK RQ
TIME_U : G ACK BQ
EOS_CM : A EOS
(9) After editing MESSAGE, press [CALL]KEY, then MESSAGE is transmitted once.
After MESSAGE is transmitted, when edit MESSAGE again, press [×]/[Ø] KEY
and then can be return to edit MODE.
- 35 -
STR-580D
SAMYUNG ENC
4.4.8 EDIT AIR COMMUNICATION NETWORK(AUTONETWORK(AUTO-SemiAuto)
MESSAGE AND CALL
(1) Select [3.AUT/SEMI CAL EDIT] on the [MENU ITEM SEL] screen.
-- MENU ITEM SEL --------------[0]
--------------[0]
1. ALL SHIP CAL EDIT
2. INDIVIDL CAL EDIT
3. AUT/SEMI CAL EDIT
-- AUTO CALL EDT --------------[X]
--------------[X]
FORMAT : AUTOAUTO-SEMI
ADDRES : 000000000
CATGRY : ROUTINE
(2) Input calling (responding) station ID after selecting 'ADDRES' item( responding
station ID number).
Initial value is 000000000.
ex) 4→8→3→1→9→2→6→5→7
-- AUTO
FORMAT
ADDRES
CATGRY
CALL EDT --------------[O]
--------------[O]
: INDIVIDL
: _________
: ROUTINE
(3) Input the desired contents after selecting 'TEL_C1' item( Tele-Command 1 ).
-- AUTO
CATGRY
SIP_ID
TEL_C1
CALL
: R
: 1
: G
EDT ---------------------------[0]
--------[0]
G3E SIM TEL
G3E DUP TEL
UNABLE COMP
END OF CALL
DATA MODEM
SHIP POSON
F1C/F2C/F3C
- 36 -
STR-580D
SAMYUNG ENC
(4) Select 'TEL_C2' item( Tele-Command 2 ) and input the desired contents.
-- AUTO
SIP_ID
TEL_C1
TEL_C2
CALL
: 1
: G
: N
EDT --------------[0]
--------------[0]
RE18 SIP/PL
MEDICAL TRN
TEL PUB OFS
NO INFOMATN
(5) Select 'WRK_CH' item( Working Channel ) and input VHF CHANNEL in 4 digit.
ex) [0]→[0]→[1]→[9]
-- AUTO CALL EDT --------------[O]
--------------[O]
TEL_C1 : INDIVIDL
TEL_C2 : NO INFOMATN
WRK_CH : ____
(6) Select 'TEL' item ( Telephone Number ) after input telephone address of air
communication network, press [ENT]KEY to make sure.
-- AUTO CALL EDT --------------[O]
--------------[O]
TEL_C2 : NO INFOMATN
WRK_CH : 0019
TEL : ________________
If telephone number is already registered at telephone directory in other way, press
[Ö] KEY on “TEL” where reversed pole is placed to call telephone directory, and select
the registered telephone number.
- 37 -
STR-580D
SAMYUNG ENC
===========[ * HOW TO REGISTER
REGISTER TO TELEPHONE DIRECTORY ]===========
Placed cursor to “3 AUT/SEMI CALL EDIT” at “DSC MENU”, and press〔FUC〕+〔ENT〕key,
then ‘Telephone registration’ screen will be shown, where registered telephone
number can be used by calling when air communication network telephone number is
input.
-- TEL NO REGIST --------------[O]
--------------[O]
0 :
: 82514165555
11 :
12 :
(7) After completing message edit, press [call]key then MESSAGE is transmitted once
After transmitting message, if next message is planned to be edited again.
It can be returned to edit mode by pressing [×]/[Ø]KEY.
4.4.9 RELAYING A DISTRESS CALL
(1) Select [6.DISTRESS MSG RELY] at [MENU ITEM SEL] screen.
- If there is no received distress message, this item will not be selected.
- In case that near ship distress is witnessed, and wanting to edit distress call
relaying message, press [FNC]+[ENT]KEY at〔6.DISTRESS MSG RELY〕
-- DIST RELY ----------- 01/01 [O]
FORMAT : ALL SHIP
ADDRES : _________
CATGRY : DISTRESS
(2) After message is edited, press [CALL] KEY, then MESSAGE is transmitted
once.
- 38 -
STR-580D
SAMYUNG ENC
4.4.10 Acknowledg
Acknowledgment
ment of Distress Call ( Noramlly response by Coast
Station)
Select [ 7.DISTRESS MSG ACKG] item at [MENU ITEM SEL] screen.
- It is impossible to edit message this item, and possible to response only by
[CALL]KEY).
- DISTRESS response to individual call is possible only once within 5 min.
-- DIST
FORMAT
ADDRES
CATGRY
ACKG ----------- 01/03 [X]
: INDIVIDL
: 123456789
: DISTRESS
4.4.11 Acknowledgment
Acknowledgment of Other Calls
Select [ 8.OTHERS MSG ACKG] at [MENU ITEM SEL] display.
- Message edit is impossible and only response by [CALL]KEY is possible.
-- OTHR
FORMAT
ADDRES
CATGRY
ACKG ----------- 01/03 [X]
: INDIVIDL
: 123456789
: SAFETY
4.4.12 View received Distress
Distress Call Messages
Messages
Select [9.RX DISTR MSG VIEW] at [MENU ITEM SEL] display.
-- DIST VIEW ----------- 01/03 [X]
FORMAT : INDIVIDL
ADDRES : 123456789
CATGRY : DISTRESS
4.4.13 View received Other Call Message
Select [10.RX OTHER MSG VIEW] at [MENU ITEM SEL] display.
-- OTHR
FORMAT
ADDRES
CATGRY
VIEW ----------- 01/03 [X]
: INDIVIDL
: 123456789
: SAFETY
- 39 -
STR-580D
SAMYUNG ENC
4.4.14 In case Receiving DSC Message
(1) An Alarm sounds, received MESSAGE 3 line is indicated at screen.
(2) Press the [CLR]KEY. The alarm stops. The screen returns to the initial Status
mode.
(3) If message is received continuously more than 2 times, press [CLR]KEY more than
2 times
(4) To view the received message again, select the ‘RX OTHER MESSAGE VIEW’
or 'RX DISTR MESG VIEW'.
※ In case of connecting with printer, When be received message,
it is printed automatically.
-- INDVDL
FORMAT
ADDRES
CATGRY
CALL REC-----------REC------------ [O]
: INDIVIDL
: 123456789
: SAFETY
4.4.15 Setting
Setting Automatic Acknowledgment
When received DSC Call, auto acknowledgment should be made if following conditions
are fulfilled with, and when work channel is designated, it should be on the standby
status in accordance with the designated work channel and communication methods.
※ AUTO ACK CONDITION
1.Auto acknowledgement is set ON.
(Nomally AUTO ACKNOWLEDGMENT is set to OFF in delivery condition)
2.The unit status is not editing DSC MESSAGE and MENU.
3.The content of message both in FORMAT and in CATEGORY should not be DISTRESS.
4.The telecommand1 of the message received is not "DISTRESS ACK" or
"DISTRESS RELAY".
5.The combination between Radio method of selected "TELECOMMAND" in the message
received and WORK CHANNEL designated as WORK CH must be exact.
(Ex : It is wrong combination when if “Telecommand : G3E SIMP TEL” as simplex
and “Work CH:25 as duplex channel” is combined)
6. The content of END OF SEQUENCE in Received MESSAGE should be ACK RQ.
7. There should have not received ERROR (ECC ERROR),and WING-SIDE switch should
be OFF
- 40 -
STR-580D
SAMYUNG ENC
4.4.16 SYSTEM INITIAL SETTING
Select [11.SYSTEM SETTING] at [MENU ITEM SEL] screen.
-- SYSTEM SETUP -------------- [O]
0. DSCDSC-ID : 111111111
1. GRPGRP-ID : 011111111
2. GPSGPS-AL : ON/OFF
3. DSCDSC-TM : 12:30
4. POS : N35.05E129.02
5. DSCDSC-AK : OFF
6. DATE
: 1999.07.01
7. TIME
: 13:39
8. SCAN
: ALL SCAN
9. ALRM
: 0N
10. OPER
: SIMPLEX
0.DSC-ID
1.GRP-ID
2.GPS-AL
: Input call sign of own station.
: Input call sign of group.
: ON : When couldn't received new data information during for
over 4 hours on received GPS Signal, be jingle alarm.
OFF : the apposite function of above written meaning.
3.DSC-TM
4.POS
5.DSC-AK
6.DATE
7.TIME
8.SCAN
9.ALRM
: Set the SCAN MODE.
: Set ON/OFF.
10.OPER
Input present time manually.
Set the present position of the station manually.
Set the ON/OFF of automatic acknowledgment.
Set the present data (date in the equipment)
Set the present time (time in the equipment)
: SIMPLEX
※ Caution: In case 3,4 item being input, and 2 item is ON, while transmitted DSC
MESSAGE, 6,7 item is disregarded only item 3, 4 of time/position will be
transmitted.
4.4.17 SYSTEM SELF TEST
- 41 -
STR-580D
SAMYUNG ENC
Select [12.SYSTEM SELF TEST] on [MENU ITEM SEL] screen.
-- SYS SELF TEST ------------- [O]
0. SPAC SIG TX ( OFF )
1. MARK SIG TX ( OFF )
2. DOT SIG TX ( OFF )
3. LOOP BAK SW ( OFF )
4. DISTRESS KEY TEST
5. LINE PRINTER TEST
6. PROGRAM VERSION
7. DISPLAY DEV TEST
8. SYSTEM INIT CLEAR
9. ALL SYSTEM TEST
10.
0.
1.
2.
3.
4.
5.
LOOP BAK DSC TEST
SPAC SIG TX : ON , DSC SPAC signal is transmitted continuously.
MARK SIG TX : ON , DSC MARK signal is transmitted continuously.
DOT SIG TX : ON , DSC DOT signal is transmitted continuously.
LOOP BACK SW: ON , connect inside MODEM input and output.
DISTRESS KEY TEST: Same with [DSTRESS]KEY ON without DSC message
LINE PRINTER TEST:
Print out ‘ABCDEFGHIJKLMNOPQRSTUVWXYZ-abcdefghijklmnopqrstuvwxyz
-1234567890()[]+-=?/',.;:*#' at connected PRINTER (DPU-414)
6. PROGRAM VERSION: Display program version of CPU1 and CPU2
7. DISPLAY DEVTEST:‘ABCDEFGHIJKLMNOPQRSTUVWXYZ’ is displayed
LED flickering
8. SYSTEM INITIAL CLEAR: '(*)--(PWR)--OFF-ON-->'message appears
After pressing [*]KEY and POWER OFF, ON again and then SYSTEN is cleared.
9. ALL SYSTEM TEST :
0) SELF ID..000000000 → Display DSC ID of own station
1) GROUP ID...000000000 → Display GROUP ID
2) CPU1 VER.....XXXX → Display MAIN CPU ROM PROGRAM VERSION
3) CPU2 PROGRAM VER..XX → Display PIC PROGRAM VER
4) BACKUP MEMORY.......OK → Checked/display the condition
of BACKUP MEMORY
5) PRINTER CONNECT.....OK → Checked/display connect or not of
PRINTER
6) DSC MNU(GPS)......OK → Not GPS input, display manual input
- 42 -
STR-580D
SAMYUNG ENC
switching staus
7) POWER IN(14.0V).....OK →Checked/display power of inside
equipment
8) RF LOOP BACK ...OK → Tested DSC RF, and display its abnormality
9) WKR PLL TESTING.....OK → Checked PLL of watching keeping
receiver
10) PLL...RX(00)TX(00) → Display/checked RX/TX PLL.(when
connected printer, Checked all
contents of each part of channels
11) GPS DATA IN......OK → Checked the input of GPS DATA
10. LOOP BACK DSC TEST : After executing DSC LOOP BACK TEST at RF level,
display result.
11.TX POWR(25W) TEST : Check /display transmitting output -0-/-X-
- 43 -
STR-580D
SAMYUNG ENC
4.5 DPU-414 PRINTER
4.5.1 Note while in operat
operation
ion
(1) The printing paper used in the DPU-414 pinter is a special paper which
turns black by the thermochemistry reaction. Take the following
precaution when used the paper, otherwise it would be discoloration or
decolorization.
z Keep the paper away from heat, humidity and light
z Dry your hand before handling the paper.
z Don’t rub the paper with any hard objects.
z Do not use organic adhesive on the paper(however, water-based starch
adhesives or compound adhesive will not cause any problems)
z Do not use adhesive tape on the paper.(however,double-sided tape may
be used on the front/rear side of the paper)
z Do not allow the paper to remain in contact with polyvinyl chloride
film for a long period of time.
z Do not leave the paper in contact with freshly copied diazo type or
wet process paper
z Do not allow the paper to come into contact with organic solvents.
(2) Note on using the DPU-414 printer
z Do not attempt to print when there is no paper in the printer.
z Do not turn the power switch off while printing. Only turn off the
printer after it has finished printing and the head has returned to
its home position
z The DPU-414 has the self-test function.
4.5.2 Description of front panel
(1)
POWER switch
Switch up to turn the power on, then printer head go and one, the printer
paper is fed by one column. Meanwhile, the power switch of connected
STR-580D equipment has to turn on.
(2) FEED switch
Feed the printer paper out by force. When pressed it one time, the printer
paper is fed by one column. On pressing this key, the printer paper is
fed continuously.
(3)
CUTTER
- 44 -
STR-580D
SAMYUNG ENC
(4)
(5)
Use for cutting the printer paper.
The way out of paper
The printer paper is ejected through it
PAPER COVER
Store up the printer inside this paper cover
4.5.3 Basic operation
Turn on the STR-580D main unit. Switch on the printer.
And this unit can print out the transmitted and received DSC message and DATA from
STR-580D main unit.
4.5.4 How to store the paper roll
(1) Cut the printer paper horizontally.
If there is the wrinkle on the paper, it may cause the paper jam.
Figure 4.5.2
Paper handling of the printer paper
(2) Switch off the printer
(3) Open the paper cover and pull out the center shaft
(4) Insert the center shaft in the center of the paper roll and put the end
of the paper into the way-in of paper.
(5) Switch of the printer and press the FEED key until the paper is hauled
(6) Store up the center shaft and the paper gets out of the way-out
(7) Press FEED key until the end of paper gets out of the way-out
(8) Close the paper cover and put it down to shut.
- 45 -
STR-580D
SAMYUNG ENC
5. Description
Description of components
5.1 GENERAL
STR-580D, DSC/VHF Radio telephone equipment with DSC(Digital Selective Call)
function, general voice communication as well as distress communication and normal
communication using DSC. Because the watch keeping receiver(CH70)for DSC is built in
STR-580D, it ensure 100% reception of DSC distress alert signals. And received signal
of DSC is put in FSK MODEM for DSC regardless of main channel STR-580D. Can receive
distress and general communication at CH70.
5.2 MAIN UNIT OF
OF STRSTR-580D
5.2.1 VV-400 Receiver
It consists of a Receiver and a CH70 Watch Keeping Receiver
1) Receiver
It is composed of a High frequency Amp.circuit, a 1ST MIXER
and an intermediate frequency circuit.
(1) High Frequency Amp Circuit
Signal from the antenna are put to the Mixer through the double turned
circuit. The double turned circuit is controlled and supplied with fine
turning dtg shift input corresponding to the received signal by CPU so
that the receiving sensibility can be the beat on the receiving frequency.
(2) 1st MIXER
Signal is received from High frequency Amp at RF of 1st MIXER, Signal is
made from receiving VCO by way of BUFFER AMP and then will be sent to
crystal FILTER of the next stage.
(3) Intermediate Frequency Circuit
1st IF signal is amplified by TR after through the crystal filter and put
to IC for IF. The IC consists of a 2nd local oscillator, a 2nd Mixer,
Limiter Amp., and Demodulator. 1st IF signal is mixed with 2nd Local
frequency and converted to 2nd IF signal of 455KHz. The 2nd signal is put
to demodulate circuit through the Ceramic filter and the Limiter Amp and
demodulated. The demodulated ouput signal is amplified and put to control
part.
2) V-401 CH70 Watchkeeping Frequency
- 46 -
STR-580D
SAMYUNG ENC
It is composed of a High Frequency Amp.Circuit,1st Mixer and
an Intermediate Frequency.
(1) High Frequency Amp.Circuit
Signals from the antenna are put to Mixer through the double turned
circuit.
(2) 1st MIXER
Signal is received from High frequency Amp at RF of 1st MIXER, Signal is
made from receiving VCO by way of BUFFER AMP and then will be sent to
crystal FILTER of the next stage.
(3) Intermediate Frequency Circuit
1st IF signal is amplified after through the crystal filter and put to IC
for IF. The IC consists of a 2nd local oscillator, a 2nd Mixer, Limiter
Amp and Demodulator. 1st IF signal is mixed with 2nd Local frequency and
converted to 2nd IF signal of 455KHz. The 2nd signal is put to the
3)
demodulate circuit through the Ceramic filter and the Limiter Amp.
and demodulated. The demodulated ouput signal is amplified and put to
control part.
AF Circuit
It puts voice signal from the Receiver to panel speakers, handset receivers
of the STR-580D main unit and STR-580D remote controller and handset
receiver and speaker of the Wing. It also puts signals from handset
receivers of the main unit, the remote controller and the wing to the
Transmitter.
5.2.2 VV-406 Control part
The control part is made up of CPU circuit and AF circuit. Device is
controlled by the dual CPU,V-25 and PIC16C74A.
(1) CPU circuit
CPU(V-25) controls the radio telephone and DSC functions.
CPU circuit is composed of CPUs, ROM, RAM, EEPROM, RTC and Gate Array.
(2) DSC Receiving
DSC signal(AFSK modulated signal) received by the DSC watchkeeping receiver
or the main receiver is demodulated by MODEM. The demodulated signal is
read and transmitted by CPU(V-25).CPU automatically commands the suitable
proess to devices according to data. Also, Because DSC watchkeeping
receiver is built, when Main receiver communicates with CHANNEL except
CH70,can receive CH70 all the time.
- 47 -
STR-580D
SAMYUNG ENC
(3)DSC transmitting When the DISTRESS key is pressed, CPU(V-25) read it.
According to the key operation, CPU (V-25) makes the DSC message and puts it
to the transmitter after modulating to the AFSK signal by MODEM IC.
5.2.3 VV-404 Power supply part
The Power supply part consists of a filter to decrease noise and a DC-DC
Converter through the filter. It is converted to 14V and provided to PCB
Transmission part.
5.2.4 VV-402 Transmit Part
1) Output part
(1) Modulating part
AF signal from the microphone is put to the Low Pass Filter of IC through
the Control part. It attenuated not for interference with other
channels. The power is put to VCO for transmission and modulated.
(2) APC circuit
Transmitting output voltage of Power Amp end flows to IC-U6/A and then
keep transmitting output LEVEL of Power Amp.part
2) PLL Frequency SYNTHESIZER part
The PLL IC is Frequency Synthesizer Part consists of a VCO, a PLL IC and
a Loop Filter.
(1) VCO
Transmission Part has its VCO to oscillate Transmit Frequency. VCO output
for transmission Power Amp.Circuit and to the PLL IC as well.
VCO oscillating frequency is controlled by control voltage from the Phase
Detector of PLL IC.
(2) PLL IC
The PLL IC is composed of three prescalers of R Counter.N counter and A
Counter, a phase detector and lock detector.
R Counter divides reference frequency of XU1 to comparative frequency.
N Counter divides again divided VCO output frequency by the prescaler.
A Counter divides frequencies undivided by the N Counter. It divides
frequencies from 0 to 1/63.
Those counters are controlled by dividing data corresponding to VCO output
frequency received from the CPU of the Control part and make the VCO
oscillated with required frequency.
Lock Detector output is a signal to indicate PLL is unlocked. While PLL is
unlocked. Transmission Output is a signal to indicate PLL is unlocked.
While PLL is unlocked. Transmission Output becomes off. With this
systematic function. it is effective control signal not to transmit by
wrong frequency. The Phase Detector outputs the frequency difference between
- 48 -
STR-580D
SAMYUNG ENC
comparative frequency and VCO. The output is put to the loop filter.
5.2.5 VV-467 POWER AMP.part
1) Power Amp.circuit
Modulated signal output that sent from transmitting part is amplified
DRIVER at Q1(C2053) of power amp.part. Power is amplified at U1(M57710)
and by way of Spurious restrained circuit, send to transmitting antenna.
send to APC control circuit and keep setting output.
5.3
DPUDPU-414 PRINTER
8-bit parallel input data of from the STR-580D is converted to 7 5 matrix
character code on the interface. The converted data is sent the printer to
be printed out.
- 49 -
STR-580D
SAMYUNG ENC
6.
INSTALLATION
6.1 Dismantling package and checking overall parts
Be careful to make sure, while dismantling the box package, that the goods are same
as the ordered one.
Especially, check if external damage of goods occurred during delivery. If suitable
care for such an external damage could not be made on the spot, immediately inform
the fact to the authorized distributor of SAMYUNG.
6.2 Selection
place
lace.
Selection of installation p
lace.
Select Installation place with following precautions.
1. Select a spacious place to have a unit well operated, well maintained and well
ventilated.
2. Install the unit where it doesn’t touch rain or sea water directly.
Dry area is the recommandable area for installing electronics equipment.
3. Avoid the place where sun shines directly and heating things.
4. Avoid the place where the vibration is felt.
5. Install the unit where there is less interference with other electronic devices.
6.3 Power unit connection
1. 4P connector placed in rear side of main unit is for power supply which can
be connected to power supplier as the way of 1 → (+), 2 → (-).
2. Connector for power supply is used along with BK signal output, connect
it after checking the connector pin number.
3. How to use B.K connector (option)
When used VHF band equipment over 2 numbers, or turned the speaker ON/OFF by
using B.K. Box, please use number 3 and 4 of B.K. control terminal.
DC power connector
B.K connector
1 : +13.6V, red
3 : BK SW, green
2 : -13.6V, black
4 : BK SW, white
- 50 -
STR-580D
SAMYUNG ENC
6.4 Connecting of external speaker
This equipment must use manufacture’s type speaker, if user wants to use other speaker,
please use a speaker with over 8Ω Impedanae and over 5W output power.
1P connector on the rear side of main unit is Speaker connector .
(Note : For special contract, internal speaker will be available according to user
specification)
6.5 HAND MIC Connection
4P Connector on the front panel of main unit is HAND MIC connector, please
connect it with HAND MIC connector as following picture.
- 51 -
STR-580D
SAMYUNG ENC
6.6
6.6
ANTENNA INSTALLATION
TX/RX of this STR-580D has built-in ANTENNA DUPLEXER, so it is very simple to install
Antenna according to following picture and instruction to have a better quality
of communication.
1. BASIC DIAGRAM OF ANTENNA INSTALLATION
* The most efficient way to install the Antenna is that 2 or more antennas are installed
vertically aparting from 4 m each other on the same antenna support which is widely
prevailing standard method.
2. Cautions for A
Antenna
ntenna Installation
When used STR-580D as DUPLEX method, a distance of transmitter frequency and
receiver frequency is 4.6MHz, but it sometimes surpressed the receiving
sensitivity of other transmitter or it may decrease the reachable distance
while
in long distance communication, or it may be sometimes impossible to achieve a
duplex communication.
Therefore special attention should be paid to the
installation as following points.
* Please install the antenna as high as possible.
* Install the antenna 2m in vertical distance and over 6m in horizontal distance.
* A antenna must be installed far away from other transmitting Antenna. Keep it
from other V.H.F antenna at least over 4 m.
* It must be installed to ensure itself against reasonable vibration and storm.
Connection points should be treated with water proof tape to prevent from water
leakage.
* It is recommendable to segregate the copper cable by using steel pole in case many
antennas being installed. Alternatively, it must be cabling apart from over
30 cm each.
- 52 -
STR-580D
SAMYUNG ENC
3. Connecting Method of COAXIAL CABLE (FEEDER)
FEEDER LINE for using antenna should be of RG-8/U or RG-10/U cable. After installed,
connection points at the bottom of antenna should be finished with BAND CLIP or
TAPE according to “BASIC DIAGRAM OF ANTENNA INSTALLATION”. In order to get the best
quality of communication during DUPLEX Communication, in case many antennas being
installed, it is recommended to segregate the copper cable each other by using
steel pole and to connect FEEDER LINE directly onto the main unit. If it's
impossible, TX/RX FEEDER LINE have to be kept at least over 30cm from other FEEDER
LINE by using BAND CLIP perfectly, for doing this, the connecting loss surely become
to be improved. Therefore this way of installation must be observed.
* FEEDER LINE must be installed at the place to ensure itself against reasonable
vibration and to facilitate repair and maintenance.
* FEEDER LINE should not be connected at near the steam pipe or other heating devices,
because FEEDER LINE is made of polyechilen insulation material, so it is weak
against heat.
* Do installing perfectly by paying attention to waterproof for all cable connection
holes
4. ANTENNA CABLE & CONNECTOR CONNECTING METHOD
In case connector connecting method being incorrect, it will adversely affect to
either decrease transmission output power, or to decrease receiving sensitivity.
There have been so many claims from clients in terms of wrong installation of
Antenna cable and connector connecting. Therefore following instruction should
be carefully paid attention while installation.
① Peel off the end of outside vinyl
cable about 50m/m as Fig-1.
② Soldering Pb thinly on shield line
about 20 m/m as Fig-2.
* Please use 80W solder.
solder
- 53 -
STR-580D
SAMYUNG ENC
③ Peel off the soldered shield line by knife
just leaving 10 m/m. Be careful not to
damage polyethylene insulator.
④ Peel off polyethylene insulation by knife
just leaving about 2m/m as Fig-4.
⑤ Insert CAP part after separating cable connector (PL259).
⑥ Insert connector tightly until the part of cable with Pb is seen through
connector hole with suitable tool if the case may be.
⑦ Test shortcircuit and insulation between external shield line and
inside conductor by using TESTER.
6.7 TOTAL CABLE CONNECTION
Please install total cable at the convenient place according to INSTALLATION
DRAWING.
1. While cabling in DC, please use manufacturer’s cable or cable for sufficient
current capacity.
2. Check strengthness and tightness of connector for Tx/Rx Antenna and power
supply connector to ensure against vibration.
7. MAINTENANCE & OPERATI
OPERATION
ON
- 54 -
STR-580D
SAMYUNG ENC
7.1.
OVERVIEW
OVERVIEW
Please check and maintain the equipment daily to keep all functions worked properly.
In case there having bad maintenance, it will adversely affect function of the unit.
7.2.
USING TESTER
The equipment is manufactured in accordance with International radio telephone Rule.
Therefore maintenance and adjustment of the equipment should have to be made by
authorized test center with approved tester. USER is recommended to keep following
testers for proper maintenance and adjustment to be executed daily.
1. Multi-testor for checking accurate resistance (ohm) and voltage,
current.
2. TEST PROBE that can change from high-frequency signal to
direct-current.
3.
High-frequency
transit
power
supply
that
can
check
travelling
wave up to 150MHz band with Max 25W.
4. 150MHz band max 25W, Dummy load of 50Ω
5. Frequency counter that can check 160MHz band
6. OSILOSCOPE that can check 160MHz band
7. Other testers
7.3.
Daily Check and Maintenance
1. AIR ANTENNA
When interface happened (receiving sensitivity decrease, duplex communication
interface) during installation or using, it has to check whether the air antenna
is defective for the first time.
A. Check if air antenna control vertical bearings correctly.
B. Check if metal things is placed around air antenna.
C. If it is O.K, check if connection condition and insulation of air antenna
and connecting parts between transmitter・
receiver is OK.
D. check if Travelling wave and reflection frequency after connection made is
correct and high-frequency power supply to transmitter・
receiver and coaxial
cable is correct.
And also check if condition of air antenna, connector, coaxial cable is
correct. If standing wave(VSWR) becomes over 2:1 after product standing wave,
and if less than 2:1 after product standing wave, then it's O.K.
2. POWER
- 55 -
STR-580D
SAMYUNG ENC
Check power supply circuit even though volume & squelch control do not have
any sound and indication at the front panel after connecting power
transmitter・
receiver.
A. Check if the fuse blows after opening fuse holder at the rear of transmitter
・
receiver.(Fuse : 10A)
B. Is it correct power supply connecting condition at rear of the
transmitter・
receiver. (Fuse must have been blown in case of power polarity
supply showing opposite)
C. Check power supply voltage at the power supply connector.
If 13.6V is (13～14V), it's correct. It has to be maintained if it is over
or less, there must have something wrong in power supply equipment(POWER
SUPPLY or BATTERY)
3. Transmitter
Even though hand set is OK, when transmitter switch on hand set can't work during
operating, check the connecting condition with following procedure.
A. Check Air antenna & Power. In case channel select being incorrect or select
not permitted channel, the unit cannot receive.
B. Check V-402 PCB or V-403 PCB of inside of equipment, if this part is
not good, have to change V-402 PCB or V-403 PCB.
4. Receiver
After checking if switch is selected correctly for the first time,
check as follows ;
A. Check connection of speaker after checking air antenna or power.
B. Check V-400 PCB or V-401 PCB of inside of equipment, if this part is
not good, have to change V-400 PCB or V-401 PCB.
5. DSC Receiver
After checking if switch is selected correctly for the first time,
check as follows ;
A. Check air antenna connection for DSC.
B. Check V-401 PCB or V-406 PCB of inside of equipment, if this part is
not good, have to change V-401 PCB or V-406 PCB.
6. SWITCH and DISPLAY
- 56 -
STR-580D
SAMYUNG ENC
According to manual, check to confirm error using or setting value and in case of
no error, check as follows
A. Check V-407 PCB of equipment
In case of error, replace by spare.
B. Check connector and cable connected to V-406 PCB or V-407 of equipment.
In case of error, replace by spare
7.4. Operating of Controller
In case of changing controllers except Power supply, it requires micro-measuring
instrument and excellent technique. It is recommended for user to ask manufacture.
7.5. Caution
1. In case of checking transmitter unit, please connect dummy load
2. In case of separating each PCB, pay attention to static electronic
3. In case of modulating, use tools for modulation
4. In case of checking or modulating, when measuring instrument contacts to the
questioned circuit, user should match signal of the circuit and PROBE of
measuring instrument.
5. In case of checking or modulating, pay attention to the difference when measuring
instrument connected into each circuit.
6. It is recommended to use the authorized A/S agent or manufacturer,SAMYUNG
ENC CO., LTD for proper repair.
8. HOW TO SET M
MMSI
MSI NO.
- 57 -
STR-580D
SAMYUNG ENC
8-1. How to enter ID
1) MANU
2) Select
Press
▼
11. SYSTEM SETTING
0.DSC
ID
by Direction button ( ▼ ),
FUNC
DISABL
3) ENT ID :
ENT
at once.
Press depot vessel’
s ID (9 figures) which is permitted Then do
not press ENT.
ENT
Will be shown on the display as follows :
e.g ID : 1
4) Select
Press
1. GRP
FUNC
ID
by direction button ▼
DISABL
at once. And then Press
ENT.
ENT
Enter the group ID (9 fogiress) as follows :
e.g ID : 0
5) Setup
Press
5. DSC
AK : ON
by direction button ( ▼ ).
ENT for conversion of “ON/OFF”
ON/OFF”
8-2. How to Connect GPS DATA
1) The type of RS232 & NEMA0183
$GPGLL, $GPGGA, $GPRMC
2) The Connection terminals are as follows ;
RX(Input)
GND
TX(Output)
3) How to checkup to enter GPS DATA
① Select
0. DISTRESS CAL EDIT
by
▼ on the MENU
② And then press ENT.
ENT
③ Be displayed “EDIT “
④ Checkup on the “
POSITION”by direction button ( ▼ ).
- 58 -
STR-580D
SAMYUNG ENC
9.
CIRCUIT DIAGRAM & INSTALLATION DIAGRAM
- 59 -
STR-580D

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2003:10:31 16:50:40
Producer                        : Acrobat Distiller 4.0 for Windows
Modify Date                     : 2003:10:31 16:51:03+09:00
Page Count                      : 63

EXIF Metadata provided by EXIF.tools