SANYO Electric AVC922 Spread Spectrum Transmitter User Manual Installation Manual

SANYO Electric Co., Ltd. Spread Spectrum Transmitter Installation Manual

Contents

Installation Manual

Download: SANYO Electric AVC922 Spread Spectrum Transmitter User Manual Installation Manual
Mirror Download [FCC.gov]SANYO Electric AVC922 Spread Spectrum Transmitter User Manual Installation Manual
Document ID861781
Application ID0mWP/fAqXh2+VgtYrIvZwg==
Document DescriptionInstallation Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize23.11kB (288829 bits)
Date Submitted2007-10-30 00:00:00
Date Available2007-12-15 00:00:00
Creation Date2007-10-26 17:59:51
Producing SoftwareAcrobat Distiller 5.0.5 (Windows)
Document Lastmod2007-10-26 18:00:00
Document TitleInstallation Manual
Document CreatorAcrobat PDFMaker 5.0 for Word
Document Author: 40631

Installation Manual
This module is to be installed only by the professionals and used only with a WLAN Module for
projector produced by SANYO Electric Co., Ltd.. When this WLAN Module is installed in the
projector, we shall consider the following points;
1. Since “QXXAVC922---P” owns its FCC ID/IC Number, we shall affix an exterior label on
the outside of the product if the FCC ID is not visible. The exterior label shall use wording
such as either ”Contains Transmitter Module FCC ID: NPKAVC922 / IC: 339D-AVC922”
or “Contains FCC ID: NPKAVC922 / IC: 339D-AVC922”.
2. “QXXAVC922---P” complies with requirements of sub-sections 15.19(a)(3) in FCC Rules
Part 15 Subpart C. The manual statement 15.19 (a)(3) is included User Guide of the product.
3. “QXXAVC922---P” is to be installed only by the professional line operator as shown in
following pictures. (Fig 1 and 2)
Fig 1. Front side of “QXXAVC922---P”
WLAN Module
Fig 2. Front view of “QXXAVC922---P” to be equipped for a projector (example)
Module Board on
Network Assembly Board
Location of Network
Assembly Board in a
projector
There isn’t an official user manual for this WLAN Module (QXXAVC922---P).
However, user manuals of final product, which have the module, must
contain notification corresponding to the following description.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
(This device complies with Part 15 of FCC Rules and RSS-Gen of IC Rules.)
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of this device.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This class B digital apparatus complies with Canadian ICES-003.
Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada.
This transmitter must not be co-located or operated in conjunction with any other
antenna or transmitter.
This equipment complies with FCC radiation exposure limits set forth for uncontrolled
equipment and meets the FCC radio frequency (RF) Exposure Guidelines in
Supplement C to OET65. This equipment must be installed and operated with at least
20cm and more between the radiator and person’s body (excluding extremities: hands,
wrists, feet and ankles).

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Modify Date                     : 2007:10:26 18:00:00+09:00
Create Date                     : 2007:10:26 17:59:51+09:00
Page Count                      : 2
Creation Date                   : 2007:10:26 08:59:51Z
Mod Date                        : 2007:10:26 08:59:51Z
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : 40631
Metadata Date                   : 2007:10:26 08:59:51Z
Creator                         : 40631
Title                           : Installation Manual
Page Mode                       : UseNone
Tagged PDF                      : Yes
EXIF Metadata provided by EXIF.tools
FCC ID Filing: NPKAVC922

Navigation menu