SDI Technologies HBN22 Hotel Bluetooth FM Radio Alarm Clock with Line-in and USB Charging User Manual HBN22 QSG 110916
SDI Technologies Inc. Hotel Bluetooth FM Radio Alarm Clock with Line-in and USB Charging HBN22 QSG 110916
15_HBN22 UserMan
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3218814 |
| Application ID | YsVW841jZsx7MKWP4CrmZg== |
| Document Description | 15_HBN22 UserMan |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 124.11kB (1551320 bits) |
| Date Submitted | 2016-12-06 00:00:00 |
| Date Available | 2016-12-06 00:00:00 |
| Creation Date | 2016-11-09 17:04:24 |
| Producing Software | Adobe PDF library 15.00 |
| Document Lastmod | 2016-12-05 14:44:04 |
| Document Title | HBN22 QSG_110916 |
| Document Creator | Adobe Illustrator CC 2015 (Macintosh) |
HBN22 Quick Start Guide - Front Size: 432 x 140 mm Printing Color: Black Mat’l: 100 gsm WF paper Nov 9, 2016 Set Up HBN22 Staff Quick Start Guide 1 Remove thumbscrew and remove back cover to access staff controls. Setting the Time Zone and Clock Secure the attached Security Tether to a wall or other permanent surface. CAUTION: DO NOT attach to an AC outlet or cause it to become entangled with anything that can create a hazardous situation. (Factory Preset Clock) time set time zone The first time you connect your new preset clock to the AC outlet, the unit will automatically show the correct Eastern Standard time, which is the default setting. If you are not in the Eastern time zone, you must change the default setting to match your time zone (see Time Zone Setting below). Once the correct time zone is set, if the time displayed is not correct, follow steps under Manual Clock Setting to set the correct time, year and date. Included • HBN22 system • Universal AC adaptor Connect the universal voltage AC adapter to the DC jack on the back panel of the unit and plug into a working outlet that is not controlled by an On/Off switch. 4 Set the Volume Limit Switch to High for large rooms or to Low for smaller rooms. Time Zone Setting Press and hold the time zone button for 2 seconds. time zone outlet 5 Extend the FM antenna for best reception. The currently set time zone will flash. Press the – or + button to adjust to your time zone. DC 9V 3A time set time zone Press the time zone button to confirm time zone. time set time zone time zone FM Antenna HBN22 Quick Start Guide - Inside Size: 432 x 140 mm Printing Color: Black Mat’l: 100 gsm WF paper Daylight Saving Time The unit ships with the Daylight Saving Time (DST) switch in Auto position, and will automatically adjust when the time changes in March and November. If Daylight Saving Time is NOT observed in your location, move the DST switch from AUTO to -1 or +1 BEFORE setting time. Press the time set button to confirm time. The year will flash. Press the time set button to confirm date and exit clock setting. time set time set Once staff has completed setup, replace security cover on back of unit and tighten thumbscrew. Press the - or + button to set year Manual Clock Setting Press and hold the time set button for 2 seconds to enter clock setting mode. Backup Batteries Press the time set button to confirm year. The date will flash. time set time set Press the - or + button to adjust time. Press the - or + button to set date (hold for faster adjustment). Keep unit connected to AC power when replacing batteries or you will lose settings. When Low Battery Icon appears on top left of the display, replace backup batteries with 2 fresh AA batteries. make sure to match polarity markings (-/+) to those in battery compartment. Battery Cautions and Tips • Only use the recommended/supplied batteries or equivalent. • Use alkaline batteries for longer life. • Do not mix old and new batteries, and do not mix alkaline, carbon-zinc or rechargeable nickel-cadmium batteries. • Insert batteries with proper polarity (+/–) as indicated. • Remove exhausted batteries from product. • Do not attempt to recharge non-rechargeable batteries. • Do not open batteries or heat them beyond normal ambient temperatures. • To prevent battery leakage or damage remove batteries from a product if it will not be used for a month or longer. • Use extreme caution handling leaking batteries (avoid direct contact with eyes and skin). If battery leakage comes in contact with eyes, IMMEDIATELY flush the eye with lukewarm and gently flowing water for at least 30 minutes. If skin contact occurs, wash skin with clear water for at least 15 minutes. Seek medical attention if any symptoms occur. • Store in cool, dry, ventilated area away from hazardous or combustible material. • Do not dispose of batteries in the household trash or fire. • Follow applicable laws and local regulations for the disposal and transportation of batteries. Maintenance • Place the unit on a level surface away from sources of direct sunlight or excessive heat. • Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth or other protective material should be placed between it and the furniture. • Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents, such as thinner or similar materials can damage the surface of the unit. HBN22QSG-110316-A © 2016 HTI Industries, LLC. All rights reserved Printed in China Generic Legal Sheet for all Hotel model items - Front Size: 108 x 140 mm Color: 1C + 1C (Black) Material: 100 gsm WF paper Generic Legal Sheet for all Hotel model items - Back Aug. 04, 2015 IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. 1. Water and Moisture – The unit should not be used near water. For example: near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement. 2. Ventilation – The unit should be situated so that its location or position does not interfere with its proper ventilation. For example, it should not be situated on a bed, sofa, rug or similar surface that may block ventilation openings. Also, it should not be placed in a built-in installation, such as a bookcase or cabinet, which may impede the flow of air through the ventilation openings. 3. Heat – The unit should be situated away from heat sources such as radiators, heat registers, stoves or other appliances (including amplifiers) that produce heat. 4. Power Sources – The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. 5. Power-Cable Protection – Power supply cables should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. It is always best to have a clear area from where the cable exits the unit to where it is plugged into an AC socket. 6. Cleaning – The unit should be cleaned only as recommended. See the Maintenance section of this manual for cleaning instructions. 7. Objects and Liquid Entry – Care should be taken so that objects do not fall and liquids are not spilled into any openings or vents located on the product. 8. Attachments – Do not use attachments not recommended by the product manufacturer. 9. Lightning and Power Surge Protection – Unplug the unit from the wall socket and disconnect the antenna or cable system during a lightning storm or when it is left unattended and unused for long periods of time. This will prevent damage to the product due to lightning and power-line surges. 10. Overloading – Do not overload wall sockets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock. 11. Damage Requiring Service – The unit should be serviced by qualified service personnel when: A. the power supply cable or plug has been damaged. B. objects have fallen into or liquid has been spilled into the enclosure. C. the unit has been exposed to rain. D. the unit has been dropped or the enclosure damaged. E. the unit exhibits a marked change in performance or does not operate normally. 12. Periods of Nonuse – If the unit is to be left unused for an extended period of time, such as a month or longer, the power cable should be unplugged from the unit to prevent damage or corrosion. 13. Servicing – The user should not attempt to service the unit beyond those methods described in the user’s operating instructions. Service methods not covered in the operating instructions should be referred to qualified service personnel. FCC Information This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. • Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. • NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. CAN ICES-3 (B)/NMB-3(B) Questions? visit www.hoteltech.com or call 1-888-744-6835 Toll Free LIMITED 30 DAY WARRANTY (valid in contiguous U.S.A. only: not valid in Hawaii or Alaska) Hotel Technologies, a division of HTI Industries LLC, (hereafter referred to as Hotel Technologies), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of 30 days from the date of receipt of the item. Should service be required by reason of any defect or malfunction during the warranty period, Hotel Technologies will repair or, at its discretion, replace this product without charge. This decision is subject to verification of the defect or malfunction upon delivery of this product to the Factory Service Center listed below. Before returning this product for service, please first replace the batteries (if applicable) with fresh ones, as exhausted or defective batteries are the most common cause of problems encountered. If service is still required: 1. Fax a representative at 915.633.1388 with a Return Authorization request including proof of purchase date (i.e., invoice number and date from distributor or HTI) to receive a Return Authorization Number. Issuance of Return Authorization Number is subject to review prior to granting. NO ITEM CAN BE ACCEPTED WITHOUT A RETURN AUTHORIZATION NUMBER. 2. Remove batteries (if applicable) and pack the unit in a well-padded, heavy corrugated box. 3. Send the unit by method agreed to with your representative to the Factory Service Center listed below: Consumer Repair Department Hotel Technologies Inc. 1330 Goodyear Drive El Paso TX 79936-6420 NOTE: Improperly packed items or Items received without an RA # cannot receive credit. NOTE: This warranty is valid only if the product is used for the purpose for which it was designed. It does not cover (i) products which have been damaged by negligence, misuse or accident, or which have been modified or repaired by unauthorized persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage to tape cassettes (if applicable); (iv) the cost of shipping this product to the Factory Service Center and its return to the owner. This warranty is valid only in the United States of America and does not extend to owners of the product subsequent to the original purchaser. Any applicable implied warranties are also limited to 30 days, and Hotel Technologies will not be liable for consequential damages. (Some states do not allow limitations on implied warranties or exclusion of consequential damages, so these restrictions may not apply to you.) This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. If you did not purchase this product directly from Hotel Technologies, please contact the appropriate distributor for their warranty terms IC Statement for RF Device This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance. Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la section 2.5 de RSS 102 et la conformité à l'exposition de RSS-102 rf, utilisateurs peut obtenir l'information canadienne sur l'exposition et la conformité de rf. HBN21-150425-A © 2015 HTI Industries, LLC. All rights reserved Printed in China
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Format : application/pdf Title : HBN22 QSG_110916 Metadata Date : 2016:12:05 14:44:04+08:00 Modify Date : 2016:12:05 14:44:04+08:00 Create Date : 2016:11:09 17:04:24+08:00 Creator Tool : Adobe Illustrator CC 2015 (Macintosh) Thumbnail Width : 256 Thumbnail Height : 232 Thumbnail Format : JPEG Thumbnail Image : (Binary data 14218 bytes, use -b option to extract) Instance ID : uuid:0d0d12ea-7154-43b2-b45d-0f309da7810b Document ID : xmp.did:b0dc21e4-515c-411a-a1da-f1f191a8c20c Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:71df8714-554e-41e4-a32c-6e35686f897a Derived From Document ID : xmp.did:71df8714-554e-41e4-a32c-6e35686f897a Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : proof:pdf History Action : saved, saved History Instance ID : xmp.iid:FC7F1174072068118A6D96E7C26D8860, xmp.iid:b0dc21e4-515c-411a-a1da-f1f191a8c20c History When : 2013:03:19 17:38:49-04:00, 2016:11:09 17:04:20+08:00 History Software Agent : Adobe Illustrator CS5, Adobe Illustrator CC 2015 (Macintosh) History Changed : /, / Manifest Link Form : EmbedByReference Manifest Reference File Path : /Volumes/MAC_USERS/CharlieLaw/Desktop/Artwork/01_SDI/HBN22/HBN22 REN v2_unit.png Manifest Reference Document ID : adobe:docid:photoshop:9a6aa758-e2f1-1179-8f7a-c6bcd96fd0c6 Manifest Reference Instance ID : xmp.iid:cc81559e-c1af-4cf6-a2a9-1854390020c0 Ingredients File Path : /Volumes/MAC_USERS/CharlieLaw/Desktop/Artwork/01_SDI/HBN22/HBN22 REN v2_unit.png Ingredients Document ID : adobe:docid:photoshop:9a6aa758-e2f1-1179-8f7a-c6bcd96fd0c6 Ingredients Instance ID : xmp.iid:cc81559e-c1af-4cf6-a2a9-1854390020c0 Startup Profile : Print Has Visible Overprint : True Has Visible Transparency : True N Pages : 1 Max Page Size W : 480.757221 Max Page Size H : 386.894211 Max Page Size Unit : Millimeters Font Name : MyriadPro-SemiboldIt, ArialMT, Arial-BoldMT, HelveticaNeue, MyriadPro-Regular, Gotham-Bold, Gotham-Medium, Gotham-Light, Gotham-LightItalic, MyriadPro-Bold, MyriadPro-Semibold Font Family : Myriad Pro, Arial, Arial, Helvetica Neue, Myriad Pro, Gotham, Gotham, Gotham, Gotham, Myriad Pro, Myriad Pro Font Face : Semibold Italic, Regular, Bold, Regular, Regular, Bold, Medium, Light, LightItalic, Bold, Semibold Font Type : Open Type, Open Type, Open Type, TrueType, Open Type, Type 1, Type 1, Type 1, Type 1, Open Type, Open Type Font Version : Version 2.106;PS 2.000;hotconv 1.0.70;makeotf.lib2.5.58329, Version 5.01.2x, Version 5.01.2x, 10.0d40e1, Version 2.106;PS 2.000;hotconv 1.0.70;makeotf.lib2.5.58329, 001.000, 001.000, 001.000, 001.000, Version 2.106;PS 2.000;hotconv 1.0.70;makeotf.lib2.5.58329, Version 2.106;PS 2.000;hotconv 1.0.70;makeotf.lib2.5.58329 Font Composite : False, False, False, False, False, False, False, False, False, False, False Font File Name : MyriadPro-SemiboldIt.otf, Arial.ttf, Arial Bold.ttf, HelveticaNeue.dfont, MyriadPro-Regular.otf, GothaBol; Gotham-Bold, GothaMed; Gotham-Medium, GothaLig; Gotham-Light, GothaLigIta; Gotham-LightItalic, MyriadPro-Bold.otf, MyriadPro-Semibold.otf Plate Names : Cyan, Magenta, Yellow, Black, PANTONE 254 C Swatch Groups Colorants L : 38.431374 Swatch Groups Colorants A : 60 Swatch Groups Colorants B : -36 Swatch Groups Colorants Tint : 100.000000 Swatch Groups Group Name : Brights Swatch Groups Group Type : 0 Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0 Swatch Groups Colorants Mode : CMYK Swatch Groups Colorants Type : PROCESS Swatch Groups Colorants Cyan : 60.000000 Swatch Groups Colorants Magenta : 90.000000 Swatch Groups Colorants Yellow : 0.003100 Swatch Groups Colorants Black : 0.003100 Producer : Adobe PDF library 15.00 Slug Family : Helvetica Neue Slug Version : 10.0 Slug Outline File Size : 0 Slug Kerning Checksum : 54839 Slug Foundry : Linotype AG Slug Font Kind : TrueType Slug Checksum : 3422875611 Slug Post Script Name : HelveticaNeue Slug Font Sense 12 Checksum : 3422875611 Page Count : 2 Creator : Adobe Illustrator CC 2015 (Macintosh)EXIF Metadata provided by EXIF.tools