SDI Technologies IBT28 Color Changing Dual Alarm Clock BT Speaker System with USB Charging and FM Radio User Manual iBT28 IB English
SDI Technologies Inc. Color Changing Dual Alarm Clock BT Speaker System with USB Charging and FM Radio iBT28 IB English
users manual
Page 1
Model: iBT28
Instruction Manual (English)
Print color : Black text on white paper
Size of manual: 178mmW x 178mmH
Date: Nov 5, 2013
Model: iBT28
Color Changing
Bluetooth Dual Alarm Clock
Speaker System with
USB Charging and FM Radio
Questions? Visit www.ihome.com
download QR code
reader app and scan
Page 2
Thank you for purchasing the iHome iBT28 Color Changing Bluetooth Dual Alarm Clock FM Radio. This system provides high
quality wireless and Aux-in audio performance combined with relaxing colored mood lights. Please read this instruction carefully
before operating the unit and keep it for future reference.
Getting Started
• Place the unit on a level surface away from sources of direct sunlight or excessive heat.
• Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth or other protective material
should be placed between it and the furniture.
• Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents, such as Benzene,
thinner or similar materials can damage the surface of the unit.
Maintenance
Battery Information
For models that use Lithium batteries
• Lithium batteries can explode or cause burns if disassembled, shorted, recharged, exposed to water, fire, or high temperatures.
& not handled appropriately
•Do not place loose batteries in a pocket, purse, or other container containing metal objects, mix with used or other battery
types, or store with hazardous or combustible materials.
•Store in cool, dry, ventilated area.
• Follow applicable laws and regulations for transport and disposal.
1
2
3
4
5
6
7
8
9
10
11
Controls and indicators
iBT28 Quick Start
Display / Using Bluetooth
Setting the Time / Setting the Alarms
Operating the Alarm / Listening to FM Radio
Using the Unit in Other Countries / Playing your Aux-in Audio Device / Charging a Device with the USB Port
Color Change Mode / Dimmer Mode / Bedtime Sleep Mode
Installing/Replacing the Clock Backup Battery
A Consumer Guide to Product Safety
Trouble Shooting
Warranty Information
Table of Contents
FCC Information
Page 3
FCC ID: EMOIBT28
IC: 986B-IBT28
This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
• Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
• NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAN ICES-3 (B)/NMB-3(B)
IC Statement
The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance
with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance.
Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la section 2.5 de RSS 102 et la
conformité à l'exposition de RSS-102 rf, utilisateurs peut obtenir l'information canadienne sur l'exposition et la
conformité de rf.
QDID:XXXXXXX
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur
de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement.
1
Top panel
Controls and Indicators
Lower Volume Button
Pairing/Mode Button
Press and hold to pair Bluetooth devices
Press to toggle between Bluetooth,
FM radio and Aux-in modes
DC Adapter Jack
Plug in AC adaptor cable and
connect to outlet
USB charging port
Plug in USB cable to charge device
Aux-in jack
Connect an audio device
via standard audio cable
to headphone jack
Play/Pause and Presets Button
Press to play or pause connected
Bluetooth devices, in FM mode set and
select FM radio presets
Forward/ Plus
Settings Button
Press to raise selected setting
Reverse/Minus
Settings Button
Press to lower selected setting
Time Set/Sleep Button
Press for sleep timer
Press and hold for time setting
Snooze/Dimmer Button
Press to silence alarm for selected time
Press to adjust brightness during standard
operation (not during alarm mode)
Power/Alarm Reset Button
Press to turn unit ON or OFF,
reset alarm when sounding
Raise Volume Button
Raise volume
Lower volume
Set and arm/disarm Alarm 2
Alarm 2 Button
Set and arm/disarm Alarm 1
Alarm 1 Button
Press to cycle color settings
Color Button
Back panel
Access backup battery
Backup Battery Compartment
Page 4
FM radio antenna
Extend antenna for best reception
(do not strip, alter or attach to
other antennas)
2
Page 5
iBT28 Quick Start
1: power
Press and hold the Time Set/Sleep Button until the
display flashes.
Press – or + Button to set correct time (hold for rapid
adjustment). Make sure to set correct AM or PM time.
Press the Time Set/Sleep Button again, then press –
or + Button to set the correct year.
Press the Time Set/Sleep Button again, then press –
or + Button to set the correct date.
Press the Time Set/Sleep Button again to complete
time setting. 2 beeps will confirm time setting is done.
3: time set
Press and release the Color Button as needed to cycle
through color mode settings. In GLOW color change
mode, press and release the Color Button when a
specific color is showing to select that color.
When the unit is OFF and in one color mode, press the
– or + Button to change color.
4: color change
Attach AC adaptor cable to the
DC adapter jack on back of the
iBT28 and plug the other end
into a wall socket to play aux
device or radio. Remove the tab
from the battery backup
compartment.
Power on your Bluetooth audio device and turn on Bluetooth capability on your
device (Settings>Bluetooth on IOS). Press the Button on the unit to turn the unit
on. The first time the unit is powered on, it will enter Auto-pairing mode and attempt
to pair with an available Bluetooth device. “iHome iBT28” should appear on your
device’s list of Bluetooth devices. Select “iHome iBT28” on the device to complete
pairing. “PAIRED” should appear on the display and 2 beeps will confirm pairing is
complete. Press the Button to play or pause audio.
2: Bluetooth pairing: first time use
If you experience any
trouble pairing your
device, see the Using
Bluetooth section of
this booklet on page 3.
RESET
RESET
TEST
TEST
3
Page 6
Using Bluetooth
Pairing
This unit features an auto-pair feature: when powered on for the first time (OR following a reset), the unit will automatically
attempt to pair with a new Bluetooth device. After this, Bluetooth devices must be paired using the Pairing/Mode Button.
1.
Power on your Bluetooth audio device and turn on Bluetooth capability on your device (check the instructions that came
with your device for details)
2. Press and release the Button located on top of the unit to turn the unit ON. The first time the unit is powered on,the
unit will automatically enter pairing mode. Otherwise, press and hold the Pairing/
Mode Button
for 2 seconds to begin
pairing. Pairing mode is indicated by the Bluetooth icon and “PAIR” flashing on the display. “iHome iBT28” should appear
on your device’s list of Bluetooth devices. If “Not Paired”, “Not Connected” or similar message appears, or if prompted to
confirm that you wish to pair/connect, tap on “iHome iBT28” to confirm/ complete pairing.
3. If pairing is successful, 2 beeps will sound and “PAIRED” will appear on the display. If “FAILED” appears, attempt pairing
again by pressing and holding the Pairing/
Mode Button
for 2 seconds. Once paired, your device will auto-link to the
unit whenever you are within range (30 feet).
Playing Bluetooth Audio
1.
Once paired with the unit, you can stream audio to it from our Bluetooth device. Press
the FM presets Button located
on top of the unit to turn the unit ON and begin play. Audio wave icons will appear by the Bluetooth icon to indicate
Bluetooth audio mode. Press again to pause play, and again to resume play. Note: If unit is ON and in FM radio mode,
press and release the Pairing/
Mode Button
as needed to cycle to Bluetooth mode before pressing the FM presets
Button.
2. Press the + or – Button to control track selection (press and gold to scan forward or backward within tracks).
3. Press the or Button on the unit to adjust the system volume.
Resetting Bluetooth Audio
To reset Bluetooth settings (clear all currently paired/linked devices), press and hold the Pairing/
Mode Button
for 10
seconds. 2 beeps will confirm Bluetooth reset.
Display
Wake to indicator
PM indicator
AM indicator
Sleep mode indicator
Time display
Low Backup Battery indicator
Alarm display indicator
FM radio mode indicator display
Mode/Bedtime Sleep Timer/
FM station/alarm time display
Alarm 1 and 2 indicators
Alarm is armed and will sound at set time
Aux-in mode indicator
Bluetooth indicator:
• Flashes during pairing
• Solid when linked device is present
• Audio waves when Bluetooth audio is playing/paused
This unit has a dual alarm system so you can set two separate alarms to different alarm times and sources.
Setting the Alarms
Note: Alarm 1 and Alarm 2 are set the same way; Alarm Button below means the button ( or ) for whichever alarm
you are setting.
1. Press and hold the or Button until the alarm time flashes on the lower part of the display and a beep sounds.
Press and release the
– or + Button
to set the alarm time (press and hold for faster setting). Remember to set the
correct AM or PM time.
2. Press and release the Alarm Button again to confirm the set alarm time. The wake to icon will flash.
3. Press and release the
Mode Button
as needed to set the alarm wake-to source: Bluetooth (BT), FM radio or Buzzer.
Waking to Bluetooth audio device: At the set alarm time the unit will send a play command to the currently linked
Bluetooth device. If the unit does not detect a linked Bluetooth device at the set alarm time, the unit will default to buzzer
alarm. The alarm cycle lasts for one hour; make sure you have enough music on your audio device to last that long.
Waking to FM radio: The default wake to source is the current FM radio station. Press and release the
– or + Button
to set a different station (press and hold to scan to the next clear station). To wake to a preset station, press the
FM presets Button to cycle to the desired preset (see page 5 for details on setting presets).
4. Press and release the Alarm Button again, then press and release
the – or + Button to
set the color LED wake cycle:
DAWN (amber fade leading up to alarm time), FLASH (flashing red while alarm sounds), GLOW (glowing color sequence
while alarm sounds) or NONE (no wakeup LED effect).
5. Press and release the Alarm Button again (or no button within 10 seconds) to exit the alarm setting mode.
2 beeps will
confirm alarm setting is
complete. The alarm will be armed once set and the corresponding alarm icon will light up. The
lower part of the display will show the earliest set alarm time.
Setting the Alarms
4
Page 7
Setting the Time
1. Press and hold the Time Set/Sleep Button. The time will flash and a beep will sound. Press the – or + Button to set the
correct time (press and hold for rapid setting). Remember to set the correct AM or PM time. The AM and PM Indicators are
located to the left of the time digits.
2. Press either the or Button at any time during clock setting to toggle the display between 24 hour (military) and 12 hour
(standard) display mode. The AM/PM indicators will not appear when display is in 24 hour mode.
3. Press the Time Set/Sleep Button again. The year will flash. Press the – or + Button to set the correct year.
4. Press the Time Set/Sleep Button again. The date will flash. Press the – or + Button to set the correct date (press and
hold for rapid setting).
5. Press the Time Set/Sleep Button again (or no button press within 10 seconds) to exit the clock setting mode. 2 beeps will
confirm clock setting is complete.
Setting 12 or 24 Hour Time Display
1. Press and hold the Time Set/Sleep Button. The time will flash and a beep will sound.
2. Press either the or Button to toggle the display between 24 hour (military) and 12 hour (standard) display mode. The
AM/PM indicators will not appear when display is in 24 hour mode.
3. Allow unit to “time out” (no button pressed within 10 seconds) to exit the clock display/time setting mode.
Setting up the Antenna
Extend the FM wire antenna fully for best reception. Do not strip, alter or attach to other antennas.
Tuning and Playing the Radio
1. Press and release the radio/aux Button as needed to cycle through FM radio and Aux-in modes.
2. When FM mode is selected, press the + or – Button to tune the radio to a desired station. The current radio frequency
appears in the lower part of the display. Press and hold the + or – Button for a few seconds to scan for the next clear
station.
3. To memorize a station as a preset:
A. Press the FM presets Button as needed to step through the 6 presets (P1 - P6) to the number you wish to
assign, and then hold the FM presets Button until the selected preset number begins flashing in the display
and 1 beep sounds.
B. Press the + or – Button to tune the radio to a desired station. Hold briefly to have the radio autoscan/search for
the next clear station.
C. Press the FM presets Button to confirm the setting, two confirmation beeps will confirm the setting and the
preset number you wish to assign. Repeat steps A-C to preset up to 6 stations.
4. To listen to a preset station, press the FM presets Button to choose the desired preset.
5. Press the or Button on the unit to adjust the system volume.
5
At the set time, the alarm will sound for 1 hour. If waking to Aux-in, make sure your device is connected to the aux-in audio cable
and has an hour of music in it or is set to repeat.
1. To turn off the sounding alarm and reset it to come on at the same time the following day, press and release the Button.
The alarm sound will stop but the alarm icon will remain in the display, indicating the alarm is armed. To turn off
the alarm without resetting it for the next day, press and release the Alarm Button.
2. Press and release the Alarm Button during normal operation (alarm is not sounding) as needed to arm the alarm (alarm
icon is present) or to cancel it (no alarm icon).
3. Press and release the Snooze Button while alarm is sounding to temporarily silence the alarm for the set snooze time
(default is 9 minutes). To adjust the snooze time: press and hold the Snooze Button during normal operation. The
snooze time will flash on the display and 1 beep sounds. Press the
– or + Button
to adjust the snooze time from 1 - 29
minutes. Press and release the Snooze Button again (or no button within 10 seconds). Two beeps will sound to confirm
snooze setting and return unit to normal operation.
Operating the Alarm
Listening to FM Radio
Page 8
Playing your Aux-in Audio Device
1. Connect a standard stereo audio cable with 3.5mm plug (not included) to the Aux-in jack located on the back of the unit
and connect the other end to the headphone jack or aux-out jack on your audio device.
2. Press and release the Button to turn on the unit. Turn on your aux audio device, too.
3. Press and release the Pairing/
Mode Button
as needed to cycle to Aux-in mode. Aux in will appear on the display.
4. Control audio playback and navigate tracks and menus from your audio device.
5. Press the or Button to adjust the unit volume. You may need to adjust the volume on your device, too.
6. To turn off the unit, press and release the Button. Make sure to turn off your audio device, too.
A USB port is located on the back of the unit for charging devices while the unit is connected to AC power.
Connect one end of a compatible USB cable (not included) into the standard USB port on the unit and the other end into the
device you wish to charge. Some devices require proprietary USB charging ports or cables. Monitor the charging status of
your device. If the device does not charge, you will need to use the charger that came with your device.
6
Different regions of the world use different FM radio frequency steps and ranges. You will need to select the one that matches
the standards in your region (USA, EUROPE, JAPAN, AUSTRALIA, or CHINA). The default setting is USA; if you live in the US,
you may skip this section.
1. Make sure the unit is OFF (not playing in any mode). Press and hold the + AND – Button together for about 5 seconds
until “USA” appears in the lower part of the display and 1 beep sounds. Press and release the + or – Button to set to
your region.
2. Allow unit to “time out” (no button pressed within 10 seconds) to exit the radio frequency setting mode.
Two beeps will confirm radio frequency setting.
Using the Unit in Other Countries
Page 9
Charging a Device with the USB Port
Installing/Replacing the Clock Backup Battery
Color Change Mode
Color Change Mode can be accessed whether the unit is ON or OFF. There are 5 color settings. Press the Color Button
to cycle through them. The settings are:
• GLOW Slow color change (default): Colors slowly fade in and out continually from one color to the next.
• 1 COLOR Select the current color by pressing the Color Button when the desired color is showing in Glow mode.
• PULSE Light flashes/changes to the beat of playing music
• FAST Fast color change: colors change quickly from one to another through the color spectrum.
• OFF Turns off cabinet color effect.
TIP: To adjust the brightness of the colors, press the Snooze/Dimmer Button (not active in GLOW mode).
7
When unit is in normal mode (no alarm is sounding), press the Snooze/Dimmer Button to cycle through High, Medium, Low,
and Off brightness settings. Settings affect both the display and cabinet LED. Dimmer function will not work during GLOW
color change mode. When LED color mode is set to OFF, pressing the Snooze/Dimmer Button will place unit in 1 COLOR
mode with white backlight. Press the Color Button again to turn color mode to OFF.
Dimmer Mode
This unit has a Bedtime Sleep feature which gradually lowers the volume of playing audio over a set time then turns the unit
off. The unit will also send a pause command to certain devices connected via the aux-in. Test your device to see if it works.
1. Press and release the Sleep Button as needed to cycle to the desired sleep setting: 120, 90, 60, 30, 15 minutes or Off
(cancels sleep mode).
2. To set sleep volume, press the or Buttons. Sleep volume does not effect normal or alarm volume settings.
3. During sleep mode, press the Sleep Button to view the sleep time remaining. Press again to set sleep to the next lowest
setting.
4. To cancel sleep mode and turn the unit off, press and release the Button at any time during sleep mode.
Bedtime Sleep Mode
Page 10
Note: The CR2450 lithium battery is included in the unit. Please pull out the battery pull tab before you use the unit.
This model is equipped with a battery backup circuit that will maintain the time and alarm time settings in the event of a
temporary power interruption. The battery backup circuit will also operate the buzzer alarm to wake you up at the selected
wake up time even if the power is out. The battery backup circuit requires one CR2450 lithium battery, included.
When the backup battery is getting weak the Low Backup Battery Indicator will begin flashing in the display. When you see
this flashing indicator you should replace the backup battery as soon as possible. Purchase a replacement CR2450 battery,
available wherever batteries are sold, and follow steps 1 through 4 below to install the replacement battery.
To replace the backup battery:
IMPORTANT: When replacing the backup battery be sure to have the unit connected to
the AC outlet to maintain all of your settings, otherwise it will be necessary to reset the
time and alarm time after the battery is replaced.
1. Place unit face down. Locate the battery backup compartment found on the back of
the unit.
2. Use a Phillips screwdriver to open the battery compartment cover. Remove the
cover and remove the exhausted CR2450 battery.
3. Insert a fresh CR2450 battery in the backup battery compartment with the “+” side
facing up, as illustrated.
4. Replace the battery compartment cover and screw the compartment door back in
place. Do not overtighten. Confirm that the backup battery indicator is not flashing in
the display.
Note: Make sure you dispose of battery properly (see your local regulations).
Installing/Replacing the Clock Backup Battery
Installing Backup Battery
8
Page 11
A Consumer Guide to Product Safety
9
When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However,
improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully
before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in
these instructions and on the unit.
1. Water and Moisture – The unit should not be used near water. For example: near a bathtub, washbowl, kitchen sink,
laundry tub, swimming pool or in a wet basement.
2. Ventilation – The unit should be situated so that its location or position does not interfere with its proper ventilation. For
example, it should not be situated on a bed, sofa, rug or similar surface that may block ventilation openings. Also, it
should not be placed in a built-in installation, such as a bookcase or cabinet, which may impede the flow of air through
the ventilation openings.
3. Heat – The unit should be situated away from heat sources such as radiators, heat registers, stoves or other appliances
(including amplifiers) that produce heat.
4. Power Sources – The unit should be connected to a power supply only of the type described in the operating instructions
or as marked on the appliance.
5. Power-Cable Protection – Power supply cables should be routed so that they are not likely to be walked on or pinched
by items placed upon or against them. It is always best to have a clear area from where the cable exits the unit to where
it is plugged into an AC socket.
6. Cleaning – The unit should be cleaned only as recommended. See the Maintenance section of this manual for cleaning
instructions.
7. Objects and Liquid Entry – Care should be taken so that objects do not fall and liquids are not spilled into any openings
or vents located on the product.
8. Attachments – Do not use attachments not recommended by the product manufacturer.
9. Lightning and Power Surge Protection – Unplug the unit from the wall socket and disconnect the antenna or cable
system during a lightning storm or when it is left unattended and unused for long periods of time. This will prevent damage
to the product due to lightning and power-line surges.
10. Overloading – Do not overload wall sockets, extension cords, or integral convenience receptacles as this can result in
a risk of fire or electric shock.
11. Damage Requiring Service – The unit should be serviced by qualified service personnel when:
A. the power supply cable or plug has been damaged.
B. objects have fallen into or liquid has been spilled into the enclosure.
C. the unit has been exposed to rain.
D. the unit has been dropped or the enclosure damaged.
E. the unit exhibits a marked change in performance or does not operate normally.
12. Antenna – Do not connect an external antenna to the unit (other than that provided).
13. Periods of Nonuse – If the unit is to be left unused for an extended period of time, such as a month or longer, the power
cable should be unplugged from the unit to prevent damage or corrosion.
14. Servicing – The user should not attempt to service the unit beyond those methods described in the user’s operating
instructions. Service methods not covered in the operating instructions should be referred to qualified service personnel.
Questions? Visit www.ihome.com
Page 12
Unit doesn’t respond
(no power)
AC adaptor isn’t plugged to a wall outlet or
the connector is not plugged into the power
supply jack on the back of the unit
Wall outlet is not functioning
Make sure the AC adaptor is properly connected to a working
wall outlet and to the power supply jack on the unit
Make sure the AC adaptor is properly connected to a working
wall outlet and to the power supply jack on the unit
Plug another device into the same outlet to confirm the outlet is working
Playing device but
there is no sound
device is not connected properly
Remove your device from the audio cable and check for any
obstruction on the connectors and on your device.
Device didn’t
charge up
device is not connected properly Check all connections to make sure the AC adapter is properly
connected to the unit and to the wall outlet and that the USB
cable is the correct fit for your device and is properly connected
Sound is distorted
LED color lighting
effect is missing/
not working
Volume level is set too high Decrease the unit volume
Charge device using the charger that came with it.
Press Color Button to cycle to other color LED modes
Press Snooze/Dimmer Button to cycle to other brightness
modes
Sound source is distorted
LED color mode is set to OFF
Dimmer is set to OFF
Unit is running on backup battery
If original sound source file is poor quality, distortion and noise
are easily noticed with high-power speakers.
Try a file from a trusted audio source such as iTunes
Volume on unit or device is too low
Your device is not playing/device is
locked up
Press play button on your device to play it manually.
Please make sure your device is working properly before
connecting it to the unit. Please refer to your manual for details.
SolutionSymptom Possible Problem
Adjust the volume settings on your device and on the unit
device is locked up/frozen/ battery
has a problem
Device requires a proprietary charging set
up
Please make sure your device is working properly before
connecting it to the unit. Please refer to your manual for details.
Try reducing the output volume on the device itself. Also, try
turning bass boost OFF under settings.
10
Page 13
Trouble Shooting
Page 14
iBT28-110513-A
Printed in China
iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects in workmanship
and materials, under normal use and conditions, for a period of one (1) year from the date of original purchase. Should this product fail to function
in a satisfactory manner, it is best to first return it to the store where it was originally purchased. Should this fail to resolve the matter and service
still be required by reason of any defect or malfunction during the warranty period, SDI will repair or, at its discretion, replace this product without
charge. This decision is subject to verification of the defect or malfunction upon delivery of this product to the Factory Service Center authorized
by SDI Customer Service. The product must include proof of purchase, including date of purchase. An out-of-warranty fee for service will be
charged for units that are received without proof of purchase.
Before returning this product for service, please first replace the batteries (if applicable) with fresh ones, as exhausted or defective batteries are
the most common cause of problems encountered.
If service is still required:
1. Call SDI Customer Service at 1-800-288-2792 for Return Authorization and for the address of the Factory Service Center.
2. Remove the batteries (if applicable) and pack the unit in a well padded, heavy corrugated box. SDI is not responsible for damage that
occurs during shipping to the Factory Service Center.
3. Enclose a photocopy of your sales receipt, credit card statement, or other proof of the date of purchase, if within the warranty period.
Also include your name and address information, a brief description for why the unit is being returned, and the return authorization
number. No unit can be processed without a return authorization number.
4. Write the return authorization number on the side of the shipping package and send the unit prepaid and insured to the Factory Service
Center address authorized by SDI Customer Service.
Disclaimer of Warranty
NOTE: This warranty is valid only if the product is used for the purpose for which it was designed. It does not cover (i) products which have
been damaged by negligence or willful actions, misuse or accident, or which have been modified or repaired by unauthorized persons; (ii)
cracked or broken cabinets, or units damaged by excessive heat; (iii) damage to digital media players, CD’s or tape cassettes (if applicable); (iv)
the cost of shipping this product to the Factory Service Center and its return to the owner.
This warranty is valid only in the United States of America and does not extend to owners of the product other than to the original purchaser.
In no event will SDI or any of its affiliates, contractors, resellers, their officers, directors,
shareholders, members or agents be liable to you or any third party for any consequential or incidental damages, any lost profits, actual,
exemplary or punitive damages. (Some states do not allow limitations on implied warranties or exclusion of consequential damages, so these
restrictions may not apply to you.) This warranty gives you specific legal rights, and you may also have other rights which vary from state to
state.
Your acknowledgment and agreement to fully and completely abide by the above mentioned disclaimer of warranty is contractually binding to
you upon your transfer of currency (money order, cashier's check, or credit card) for purchase of your SDI product.
© 2013 SDI Technologies, Inc. All rights reserved
Questions? Visit www.ihome.com
or call 1-800-288-2792 Toll Free
Limited 1 Year Warranty Information