SDI Technologies IBT3 iHome Splashproof Wireless Speaker with Speakerphone User Manual iBT3 IB 101014 v4 ai

Download:
Mirror Download [FCC.gov]
Document ID	2453669
Application ID	gOSZjpo2V6bF3Fhz0denTA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	50.69kB (633684 bits)
Date Submitted	2014-11-25 00:00:00
Date Available	2014-11-25 00:00:00
Creation Date	2014-10-13 16:59:25
Producing Software	Acrobat Distiller 11.0 (Macintosh)
Document Lastmod	2014-10-14 09:22:19
Document Title	iBT3-IB_101014_v4.ai
Document Creator	Adobe Graphics Manager
Document Author:	Bill Dickson

iBT3 IB (English)
Size: 153 x 120 mm
Color: 1C + 1C (Black text on white paper)
Date: Oct. 10, 2014
P1
iBT3
Splashproof
Wireless Speaker
with Speakerphone
CHARGE
BEFORE
USE
instruction
manual
Questions? Contact Customer Service at 1-800-288-2792
P2
iBT3
Introduction
Thank you for purchasing the iHome iBT3. This product is designed to provide high quality wireless sound
for your iPad, iPhone, iPod, computer, PDA or other Bluetooth audio device.
This instruction booklet explains the basic operation and care of the unit. Please read it carefully and keep
for future reference.
IMPORTANT INFORMATION ABOUT SPLASH RESISTANT USE
For proper splash-resistant operation, make sure the seal on the left side of the unit is completely flush
with the unit by pressing along the entire edge of the seal until it is completely and securely in place.
• The unit is IPX4 rated, meaning it will repel a stream of water for up to 5 minutes.
• DO NOT immerse the unit in water.
• Make sure seal and surrounding surfaces are completely dry before opening seal to prevent moisture
from damaging the internal electronics.
• Keep seal free of dirt, sand, or other objects that can interfere with proper sealing. If for any reason the
seal is not making a tight seal, water may enter the unit.
• DO NOT clean unit with oily soaps or use chemicals or solvents. Clean with damp cloth.
P3
iBT3
Table of Contents
Included/ Meet Your iBT3/Status indicators ....................................................................... 1-4
Getting Started: Charging the unit .......................................................................................5
Using Bluetooth: Pairing Your Device ....................................................................................6
Pairing with a Different Device/ Playing Audio Via Bluetooth ...................................................7
Speakerphone Operation ..................................................................................................8
Playing Audio via Aux In ...................................................................................................9
Consumer Product Safety Guide ................................................................................... 10-11
Troubleshooting ..............................................................................................................12
Warranty......................................................................................................................13
P4
iBT3
Included
• iBT3 system
• micro USB charging cable
• carrying strap
iBT3 system
micro USB charging cable
carrying strap
P5
iBT3
Meet Your iBT3
Right Side
+ Volume Button
Power/End Call
Button
Lanyard Loop
Talk/Bluetooth Pairing/
Play/Pause Button
– Volume Button
Left Side
Reset Button
USB Charging
Port
Splash-resistant
Cover
Aux-in Jack
P6
iBT3
Top
Status indicator
Microphone
Status indicator
Status
Solid red LED
Flashing red LED
Unit is charging
Unit needs charging
Solid blue LED
Active Bluetooth connection / Aux mode
Quickly flashing blue LED
Unit is attempting to pair with Bluetooth device
Slowly flashing blue LED
Unit is attempting to auto link to already
paired Bluetooth device
P7
Using the
Bottom
iBT3
Tripod mount
The threaded tripod mount on the bottom of the iBT3 allows you to mount the unit to a bicycle
camera/tripod mount (not included) for sound on the go. To do so, screw unit clockwise onto
camera/tripod mount.
Caution: Remain aware of your surroundings and do not ride bike or operate unit in an unsafe
manner.
Getting Started: Attaching the Carry Strap
A carrying strap is included with the iBT3 for easy carrying or
attaching to a backpack, etc.
To attach the strap, insert the small loop through the loop
channel on top of the unit then pull the large loop through the
small loop.
P8
Using the
Getting Started: Charging the Unit
iBT3
Charge unit before use. For first time charge, charge for at least 8 hours.
Pull back splash-proof seal and connect the included micro USB cable to the USB Charging Port on
the left side of the unit and connect the other standard USB plug to a computer, USB AC adaptor
(not included) or other USB power source.
Computer
connected to
working outlet
Computer USB port
USB AC adaptor
(not included)
USB AC adaptor
connected to
working outlet
P9
Using the
Pairing Your Device
iBT3
Pairing is the set-up process to introduce your Bluetooth-capable device to the iBT3. Once your device is
paired, the iBT3 can recognize it and you can play your audio through it.
1. Make sure your Bluetooth device is fully charged. Turn on your Bluetooth device and make
it “discoverable” by turning on Bluetooth mode (check in Options or Settings).
2. Press and hold the
Power Button for 2-4 seconds to turn on the iBT3. The first time the
unit is powered on, it will enter auto-pairing mode and attempt to connect to a Bluetooth
device. Otherwise, follow step 3 to begin pairing.
3. Press and hold the
Talk/Pairing/Play/Pause Button on the right of the unit for 2 seconds.
The unit will beep twice and the status indicator LED will flash blue, indicating the unit is in
pairing mode.
4. “iHome iBT3” should appear in your device’s Bluetooth menu. If “Not Paired”, “Not Connected” or similar
message appears, select “iHome iBT3” to connect it. If prompted for a passcode, enter “1234” on your
device’s keypad.
iHome iBT3
iHome iBT3
iHome iBT3
iHome iBT3
For iPhone
For other
5. If pairing is successful, 2 beeps will sound and the Bluetooth indicator light will glow solid, indicating
the iBT3 is ready to play music. There should also be an indication on your device. If no device is
successfully paired within 3 minutes the iBT3 will default to previous mode. Once the iBT3 is paired to
a device, it will attempt to autolink when the device is within range (about 30 feet).
P10
Using the
Pairing with a Different Device
iBT3
When you power ON the speaker, it will automatically link with the previously paired Bluetooth
device as long as that device is still within range (approx. 30 feet). To pair with a different device
follow steps 1 - 4 under ”Pairing Your Device” on previous page.
Playing Audio Via Bluetooth
1. Press and hold the
Power Button for 2-4 seconds to turn on the unit. The status indicator will
glow solid blue when a linked device is in range and detected. You can then listen to audio
streamed wirelessly from your paired iPad, iPhone, iPod or other Bluetooth device.
2. Press the
Talk/Pairing/Play/Pause Button to play audio from your device. Press again to
pause play and once more to resume play. When Bluetooth audio is active, the status indicator
will glow solid blue.
3. Use menu and track controls on your Bluetooth device to navigate tracks.
4. Press the – or + Button to adjust the iBT3 volume. You can also adjust volume on your device.
5. When done listening, press the
device, too.
Power Button to turn the unit OFF. Remember to turn off your
P11
Using the
Speakerphone Operation
iBT3
NOTE: The unit must be powered and linked to a Bluetooth phone to receive a call.
1. When a call is received, playing music is muted to hear the ring tone. Press thexxxxxxTalk/
Bluetooth/Play/Pause Button to answer the call, or press the
Power/End Call Button to
ignore it. For call waiting function, use phone controls on your device.
2. When a call is completed, press the
previous function.
Power/End Call Button to end the call and resume
P12
Using the
Playing Audio via Aux In
iBT3
1. Connect one end of a 3.5mm audio cable (not
included) to the Aux-in jack on the left side of the unit
and connect the other end to the headphone or
line-out jack on your audio device.
2. Press and hold the
turn it on.
Power Button on the unit to
3. Power on the audio device and use the controls on
the device to play or pause audio, and navigate
tracks.
4. Press the – or + Button to adjust the system volume.
You can also adjust volume on your device.
5. When done listening, press the
Power Button
to turn the unit OFF. Remember to turn off your
device, too.
NOTE: Make sure no Bluetooth device is playing when
you want to hear Aux-in or you will hear Bluetooth
instead of Aux-in.
Mobile Phone PC/Tablet Game Devices iPod
Laptop MP3/MP4
P13
Consumer Product Safety Guide
IMPORTANT SAFETY INSTRUCTIONS
When used in the directed manner, this unit has been designed and manufactured to ensure your personal
safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety
and operating instructions carefully before installation and use, and keep these instructions handy for future
reference. Take special note of all warnings listed in these instructions and on the unit.
1. Water and Moisture – This unit is rated iPX4 (will withstand a stream of water for up to 5 minutes), but
should not be operated in or under water.
• Splash-resistant cover must be properly sealed before use near water.
• Dry unit completely before opening splash resistant cover.
• Do NOT open cover if wet or in a wet environment.
2. Ventilation – The unit should be situated so that its location or position does not interfere with its proper
ventilation. For example, it should not be situated on a bed, sofa, rug or similar surface that may block
ventilation openings. Also, it should not be placed in a built-in installation, such as a bookcase or
cabinet, which may impede the flow of air through the ventilation openings.
3. Heat – The unit should be situated away from heat sources such as radiators, heat registers, stoves or
other appliances (including amplifiers) that produce heat.
4. Power Sources – The unit should be connected to a power supply only of the type described in the
operating instructions or as marked on the appliance.
5. Power-Cable Protection – Power supply cables should be routed so that they are not likely to be walked
on or pinched by items placed upon or against them.
6. Cleaning – The unit should be cleaned only using a warm damp cloth. Do not use solvents, etc.
10
P14
7. Objects and Liquid Entry – Care should be taken so that objects do not fall and liquids are not spilled
into any openings or vents located on the product. Keep splash-resistant cover free of dirt, sand, or
objects that could interfere with a proper seal.
8. Attachments – Do not use attachments not recommended by the product manufacturer.
9. Lightning and Power Surge Protection – Unplug the unit from the wall socket and disconnect the
antenna or cable system during a lightning storm or when it is left unattended and unused for long
periods of time. This will prevent damage to the product due to lightning and power-line surges.
10. Overloading – Do not overload wall sockets, extension cords, or integral convenience receptacles as
this can result in a risk of fire or electric shock.
11. Damage Requiring Service – The unit should be serviced by qualified service personnel when:
A. the power supply cable or plug has been damaged.
B. objects have fallen into or liquid has been spilled into the enclosure.
C. the unit has been exposed to rain.
D. the unit has been dropped or the enclosure damaged.
E. the unit exhibits a marked change in performance or does not operate normally.
12. Periods of Nonuse – If the unit is to be left unused for an extended period of time, such as a month
or longer, make sure to charge the unit before storing and periodically during storage to maintain battery.
13. Servicing – The user should not attempt to service the unit beyond those methods described in the
user’s operating instructions. Service methods not covered in the operating instructions should be
referred to qualified service personnel.
Questions? Visit www.ihome.com
or call 1-800-288-2792 Toll Free
11
P15
FCC/IC Information
FCC Radiation Exposure Statement
iBT3
FCC ID: EMOIBT3
IC ID: 986B-IBT3
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be
co-located or operating in conjunction with any other antenna or transmitter.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
• Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
• NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAN ICES-3 (B)/NMB-3(B)
The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102
RF exposure, users can obtain Canadian information on RF exposure and compliance.
7*/* (
P16
Information FCC/IC
Déclaration FCC quant à l'exposition à la radiation
iBT3
FCC ID: EMOIBT3
IC ID: 986B-IBT3
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est
autorisée aux deux conditions suivantes:
1) l'appareil ne doit pas produire de brouillage, et
2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement.
Cet appareil répond aux exigences du paragraphe 15 de la loi de la Commission Fédérale sur les Communications. L’utilisation de
cet appareil doit répondre aux deux conditions suivantes: (1) Cet appareil ne doit pas provoquer d’interférences nuisibles, et (2) cet
appareil doit accepter toutes les interférences reçues, y compris les interférences pouvant provoquer un fonctionnement non désiré.
• Avertissement : Tout changement ou modification apporté à cet appareil sans le consentement expresse de la partie responsable pour
la conformité peut annuler le droit de l'utilisateur d'utiliser cet appareil.
• Remarque : Cet équipement a été testé et jugé conforme aux limitations pour un appareil numérique de Classe B, selon la Section 15
de la règlementation FCC.
Ces limites sont conçues pour fournir une protection raisonnable contre les interférences nuisibles dans une installation résidentielle. Cet
équipement génère, utilise et peut émettre des fréquences radio et, s'il n'est pas installé et utilisé selon les instructions, peut causer des
interférences nuisibles aux communications radio.
Cependant, il n'existe aucune garantie que des interférences ne se produiront pas dans une installation particulière. Si cet équipement
produit des interférences nuisibles sur la réception de la radio ou de la télévision, ce que vous pouvez facilement constater en éteignant
et en rallumant l'équipement, nous vous encourageons à prendre l'une ou plusieurs des mesures correctives suivantes :
• Réorienter ou déplacer l’antenne réceptrice,
• Éloigner davantage l'appareil du récepteur.
• Branchez l’équipement sur une prise ou un circuit auquel le récepteur n’est pas branché.
• Consultez votre revendeur ou un technicien radio/télévision qualifié pour plus d’informations.
CAN ICES-3 (B)/NMB-3(B)
Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la section 2.5 de RSS 102 et la conformité à
l'exposition de RSS-102 rf, utilisateurs peut obtenir l'information canadienne sur l'exposition et la conformité de rf.
7*/* (
P17
Troubleshooting
Unit doesn’t respond (no power)
• Check that unit is fully charged.
• Make sure your device is properly paired with the iBT3.
• Make sure the Power is ON.
Resetting Bluetooth
If Bluetooth function is not operating properly, you may wish to reset Bluetooth. To do so, insert the end of
a paperclip or similar onto the Reset Button for 10 seconds. You will hear a long high tone.
Trouble pairing device/computer with iBT3
Bluetooth implementation varies depending on your device’s hardware and operating system. Please see
our website for updates on pairing.
• Make sure you have the latest firmware for your device.
• Make sure your device is working properly. Check your device’s manual for details on Bluetooth pairing
and linking.
• When you power ON the speaker, it will automatically link with the last previously paired Bluetooth
device if the device is still within range (approx.30 feet). To pair with a different device you must turn off
Bluetooth capability on the already paired device, or take it out of range.
For further information and to see the latest instructions, visit www.ihome.com/support
12
P18
Limited 1 Year Warranty
iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects in
workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original purchase.
Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased.
Should this fail to resolve the matter and service still be required by reason of any defect or malfunction during the warranty period,
SDI will repair or, at its discretion, replace this product without charge. This decision is subject to verification of the defect or
malfunction upon delivery of this product to the Factory Service Center authorized by Customer Service.
If service is required, please call Customer Service at 1-800-288-2792 to obtain a Return Authorization Number and shipping
instructions.
Disclaimer of Warranty
NOTE: This warranty is valid only if the product is used for the purpose for which it was designed. It does not cover (i) products
which have been damaged by negligence or willful actions, misuse or accident, or which have been modified or repaired by
unauthorized persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage to digital media players,
CD’s or tape cassettes (if applicable); (iv) the cost of shipping this product to the Factory Service Center and its return to the owner.
This warranty is valid only in the United States of America and does not extend to owners of the product other than to the original
purchaser. In no event will SDI or any of its affiliates, contractors, resellers, their officers, directors, shareholders, members or agents
be liable to you or any third party for any consequential or incidental damages, any lost profits, actual, exemplary or punitive
damages. (Some states do not allow limitations on implied warranties or exclusion of consequential damages, so these restrictions
may not apply to you.) This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Your acknowledgment and agreement to fully and completely abide by the above mentioned disclaimer of warranty is contractually
binding to you upon your transfer of currency (money order, cashier's check, or credit card) for purchase of your SDI product.
© 2014 SDI Technologies, Inc. All rights reserved
Questions? Visit www.ihome.com
or call 1-800-288-2792 Toll Free
iBT3-10102014-A
13
Printed in China

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Author                          : Bill Dickson
Create Date                     : 2014:10:13 16:59:25-04:00
Modify Date                     : 2014:10:14 09:22:19+08:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Creator Tool                    : Adobe Graphics Manager
Metadata Date                   : 2014:10:14 09:22:19+08:00
Producer                        : Acrobat Distiller 11.0 (Macintosh)
Format                          : application/pdf
Creator                         : Bill Dickson
Title                           : iBT3-IB_101014_v4.ai
Document ID                     : uuid:a7d9473d-ba66-bc4c-bbbd-bdd32860b321
Instance ID                     : uuid:4a4cafcf-3ce6-4b21-962e-d04b02a214a6
Page Count                      : 18

EXIF Metadata provided by EXIF.tools