SDI Technologies IBT39N Waterproof Rechargeable Bluetooth Stereo Speaker User Manual iBT39 QSG v3 2L a O
SDI Technologies Inc. Waterproof Rechargeable Bluetooth Stereo Speaker iBT39 QSG v3 2L a O
user manual
PMS7467C
Model: iBT39
QUICK START GUIDE
Charging
» Connect the micro-USB plug on the
included charging cable to the USB
Charging jack on the speaker.
» Connect the larger USB plug to a
powered USB port such as that on
a computer or a USB AC adaptor.
In the Box » iBT39 speaker » charging cable
iHome iBT39
USB port
Computer
connected
to working outlet Computer USB port
Bluetooth Pairing & Playing
» Make your device “discoverable” by turning on Bluetooth mode
» Press and release the Power Button to turn on iBT39
» The first time the unit is
powered on it will enter
auto-pairing mode
» After powering unit on
Press and hold the
Bluetooth Pairing
Button for 2 seconds
Manual Pairing
Pairing the First Time
» Select “iHome iBT39” on your device’s Bluetooth menu to complete pairing
» Press the Play/Pause Button to play/pause music
» Press the - or + buttons to adjust volume
Speakerphone
» The speaker must be on and connected with a paired Bluetooth device to recieve calls
» Press the FWD/Answer Call Button to answer call
» For call waiting function, use phone controls on your device
» Press the REV/End Call Button again to end call
USB AC adaptor (not included)
Battery Charge Status
100% charged
dead, needs charge
low, needs charge
60 - 99% charged
46 - 60% charged
Battery Level Meter on front of unit
Contact Us: 1•800•288•2792
For warranty information and full instruction
book visit: www.ihome.com/support
Waterproof Operation
» For waterproof operation, ensure the
waterproof cover on side of unit is
pressed completely flush with the unit
water
tight
not
water
tight
iBT39
FCC Information
This device complies with Part 15 of the FCC Rules, operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment.
• Warning: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
• NOTE: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment o and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAN ICES-3 (B)/NMB-3(B)
Canada Statement
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to
the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired
operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils
radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :
(1) l’appareil ne doit pas produire de brouillage;
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si
le brouillage est susceptible d’en compromettre le fonctionnement.
The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102
and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF
exposure and compliance.
Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la section 2.5
de RSS 102 et la conformité à l'exposition de RSS-102 rf, utilisateurs peut obtenir
l'information canadienne sur l'exposition et la conformité de rf.
FCC ID:EMOIBT39N
IC:986B-IBT39N
iBT39 - 161103 -A(EN) Printed in China
iBT39 QSG (EN)
size: 110 x 165 (mm)
color: 2C + 1C (PMS7467C + black)
Material: 350gsm2 art card
Nov 3, 2016