SDI Technologies IBT56 Rechargeable Bluetooth Speaker with Speakerphone User Manual iBT56 IB 12172015 ai

SDI Technologies Inc. Rechargeable Bluetooth Speaker with Speakerphone iBT56 IB 12172015 ai

User Manual

Download: SDI Technologies IBT56 Rechargeable Bluetooth Speaker with Speakerphone User Manual iBT56 IB 12172015 ai
Mirror Download [FCC.gov]SDI Technologies IBT56 Rechargeable Bluetooth Speaker with Speakerphone User Manual iBT56 IB 12172015 ai
Document ID2882278
Application IDlLAyjBfr485ThMXAQXDxXQ==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize29.19kB (364861 bits)
Date Submitted2016-01-24 00:00:00
Date Available2016-01-24 00:00:00
Creation Date2015-12-17 11:10:04
Producing SoftwareAcrobat Distiller 15.0 (Macintosh)
Document Lastmod2015-12-17 11:10:04
Document TitleiBT56 IB_12172015.ai
Document CreatorAdobe Graphics Manager
Document Author: Bill Dickson

Model: iBT56 (Front) AUX-IN
IB (English)
Size: 324Wmm x 200Hmm
Color: Print in Black color
Date:Dec 03, 2015
iHome
Internal Rechargeable Lithium-ion Battery
A Consumer Guide to Product Safety
This device uses an internal rechargeable lithium-ion battery that should last the lifetime of
the device. If you suspect your battery may be dead, try charging it several times. If the battery
does not recharge, please contact us for repair information.
IMPORTANT SAFETY INSTRUCTIONS
WARNING/DISPOSAL OF UNIT
Please do NOT attempt to change the battery yourself. If the battery has died and you do
not want us to replace your battery, you should follow the disposal instructions below:
• Never dispose of used batteries/electronics with ordinary solid wastes, since they contain
toxic substances.
• Always dispose of used batteries/electronics in accordance with the prevailing community
regulations that apply to the disposal of batteries/electronics. If there are no local regulations
concerning battery/electronics disposal, please dispose of the device in a waste bin for
electronic devices.
• Many electronics retailers now recycle batteries and other electronic components at no
charge. Check to see which ones in your area do so.
CAUTION
The battery used in this device may present a risk of fire, explosion or chemical burn if
mistreated
• Never use or charge the battery if it appears to be leaking, discolored, deformed, or in
any way abnormal.
• Never disassemble the unit or attempt to remove battery as that could cause leakage of
alkaline solution or other electrolytic substance.
• Always confirm that the temperature is 5°C 35° C (41° - 95° Fahrenheit) before you charge
the battery.
• Leakage or deterioration of the battery may occur if this warning is not heeded.
• Never expose the battery to any liquid.
• Never expose the battery to excessive heat such as direct sunlight or fire.Never use the
battery pack in an unventilated vehicle where excessive internal temperatures may be
encountered.
• Always keep the battery out of the reach of infants and small children.
When used in the directed manner, this unit has been designed and manufactured to ensure your personal
safety. However, improper use can result in potential electrical shock or fire hazards. Please read all
safety and operating instructions carefully before installation and use, and keep these instructions handy
for future reference. Take special note of all warnings listed in these instructions and on the unit.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
Limited 1 Year Warranty Information
iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product
to be free from defects in workmanship and materials, under normal use and conditions, for a period of
one (1) year from the date of original purchase.
Should this product fail to function in a satisfactory manner, it is best to first return it to the store where
it was originally purchased. Should this fail to resolve the matter and service still be required by reason
of any defect or malfunction during the warranty period, SDI will repair or, at its discretion, replace this
product without charge. This decision is subject to verification of the defect or malfunction upon delivery
of this product to the Factory Service Center authorized by Customer Service.
12.
13.
NOTE: This warranty is valid only if the product is used for the purpose for which it was designed. It does
not cover (i) products which have been damaged by negligence or willful actions, misuse or accident, or
which have been modified or repaired by unauthorized persons; (ii) cracked or broken cabinets, or units
damaged by excessive heat; (iii) damage to digital media players, CD’s or tape cassettes (if applicable);
(iv) the cost of shipping this product to the Factory Service Center and its return to the owner.
This warranty is valid only in the United States of America and does not extend to owners of the product
other than to the original purchaser. In no event will SDI or any of its affiliates, contractors, resellers, their
officers, directors, shareholders, members or agents be liable to you or any third party for any consequential
or incidental damages, any lost profits, actual, exemplary or punitive damages. (Some states do not allow
limitations on implied warranties or exclusion of consequential damages, so these restrictions may not
apply to you.) This warranty gives you specific legal rights, and you may also have other rights which vary
from state to state.
Your acknowledgment and agreement to fully and completely abide by the above mentioned disclaimer
of warranty is contractually binding to you upon your transfer of currency (money order, cashier's check,
or credit card) for purchase of your SDI product.
•
•
•
Place the unit on a level surface away from sources of direct sunlight or excessive heat.
Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth or other
protective material should be placed between it and the furniture.
Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents
such as thinner or similar materials can damage the surface of the unit.
CHARGE
BEFORE
USE
Questions? Visit www.ihome.com
FCC Information
FCC Radiation Exposure Statement
FCC ID: EMOIBT56
IC: 986B-IBT56
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
This device complies with Part 15 of the FCC Rules, operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
•
Warning: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
•
CAN ICES-3 (B)/NMB-3(B)
Canada Statement
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two
conditions:
(1) This device may not cause interference; and (2) This device must accept any interference, including
interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio
exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :
(1) l’appareil ne doit pas produire de brouillage; (2) l’utilisateur de l’appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance
with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance.
Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la section 2.5 de RSS
102 et la conformité à l'exposition de RSS-102 rf, utilisateurs peut obtenir l'information canadienne
sur l'exposition et la conformité de rf.
QDID: B020770
IMPORTANT
Read before proceeding
If you have any question regarding the operation or use of this product, please visit
www.ihome.com to view answers to frequently asked questions.
To learn more about this and other iHome products, please visit us online at www.ihome.com
© 2015 SDI Technologies, Inc. All rights reserved
Questions? Visit www.ihome.com
or call 1-800-288-2792 Toll Free
iBT56-112715-A
Water and Moisture – The unit should not be used near water. For example: near a bathtub,
washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement.
Ventilation – The unit should be situated so that its location or position does not interfere with its
proper ventilation. For example, it should not be situated on a bed, sofa, rug or similar surface that
may block ventilation openings. Also, it should not be placed in a built-in installation, such as a
bookcase or cabinet, which may impede the flow of air through the ventilation openings.
Heat – The unit should be situated away from heat sources such as radiators, heat registers, stoves
or other appliances (including amplifiers) that produce heat.
Power Sources – The unit should be connected to a power supply only of the type described in
the operating instructions or as marked on the appliance.
Power-Cable Protection – Power supply cables should be routed so that they are not likely to
be walked on or pinched by items placed upon or against them. It is always best to have a clear
area from where the cable exits the unit to where it is plugged into an AC socket.
Cleaning – The unit should be cleaned only as recommended. See the Maintenance section of
this manual for cleaning instructions.
Objects and Liquid Entry – Care should be taken so that objects do not fall and liquids are not
spilled into any openings or vents located on the
product.
Attachments – Do not use attachments not recommended by the product manufacturer.
Lightning and Power Surge Protection – Unplug the unit from the wall socket and disconnect
the antenna or cable system during a lightning storm or when it is left unattended and unused for
long periods of time. This will prevent damage to the product due to lightning and power-line surges.
Overloading – Do not overload wall sockets, extension cords, or integral convenience receptacles
as this can result in a risk of fire or electric shock.
Damage Requiring Service – The unit should be serviced by qualified service personnel when:
A. the power supply cable or plug has been damaged.
B. objects have fallen into or liquid has been spilled into the enclosure.
C. the unit has been exposed to rain.
D. the unit has been dropped or the enclosure damaged.
E. the unit exhibits a marked change in performance or does not operate normally.
Periods of Nonuse – If the unit is to be left unused for an extended period of time, such as a
month or longer, charge battery fully before storing.
Servicing – The user should not attempt to service the unit beyond those methods described in
the user’s operating instructions. Service methods not covered in the operating instructions should
be referred to qualified service personnel.
Maintenance
If service is required, please call Customer Service at 1-800-288-2792 to obtain a Return Authorization
Number and shipping instructions.
Disclaimer of Warranty
Model: iBT56
Rechargeable
Bluetooth
Speaker
with
Speakerphone
Printed in China
CHARGING THE SPEAKER
Charging the iBT56
charging cable included
‘The iBT56 is powered by a rechargeable battery in the speaker.
MAKE SURE TO CHARGE SPEAKER BEFORE USE
reset
reset
OR
USB AC adaptor
(not included)
Computer
connected to
working outlet
Computer USB port
USB AC adaptor
connected to working outlet
Using Bluetooth with the iBT56
CHARGE BEFORE USE
TOP VIEW
FRONT VIEW
Status
LED
BACK VIEW
Charging
LED
Microphone
Power
Button
reset
Phone
Button
–/+ Volume
Buttons
• Connect the micro-USB plug on the included charging cable to the USB
Charging Jack on the speaker.
• Connect the larger USB plug to a powered USB port, such as that on a
computer or USB AC adapter. The computer or USB AC adapter should be
connected to a wall outlet when speaker is charging. The Charging LED on the
speaker will turn solid red while charging and turn off when fully charged.
• If the LED flashes red, or you notice sound distortion at higher volumes, or there
is no sound at all, it's time to recharge the battery.
Bluetooth
Pairing
Button
USB
Reset Charging Jack
BLUETOOTH MODE
SPEAKERPHONE MODE
1. Press and hold the
Power Button on the speaker to turn the speaker on.
The first time the unit is powered on, it will automatically enter pairing mode (see
step 3). Otherwise, go to step 2.
2. Press and hold the
Bluetooth Pairing Button for 2 seconds. The Status
LED will flash blue quickly and a tone will sound as the speaker attempts to pair
with a Bluetooth device.
3. Place your audio device in Bluetooth mode (look in the device’s Settings or
Tools menu) and make it “discoverable”. “iHome iBT56” should appear on your
device’s Bluetooth menu. Select it to connect. If your device asks for a
passcode, enter ‘1234’.
• Once paired, the LED will glow solid blue and a confirmation tone will sound.
You can then stream audio to the speaker. If pairing is not successful, turn the
power off on the speaker and repeat steps 1-3. To reset/clear Bluetooth, press
and hold the Bluetooth Button for 10 seconds.
4. To listen to Bluetooth audio, make sure the speaker is on. Press the – /+
Buttons to control volume. Control track navigation and menus from your
device.
Press and hold the
Power Button to turn off the speaker after listening.
NOTE: To save battery power, the unit will power off automatically after
15 minutes with no audio.
Using the iBT56 Speakerphone Mode
The speaker must be on and connected to a paired Bluetooth phone to receive
calls. When a call comes in, any playing audio is paused, the Status LED will flash
blue 2X and the ringtone associated with the caller may sound, depending on
Bluetooth device.
• Press the
Phone Button to answer a call and switch between calls.
Press and hold to ignore a call or end a call.
Press and hold
to turn speaker
ON
RESETTING THE SPEAKER
2 Sec
• Press and hold to pair
• Use controls on device
to play and pause audio
Press to answer and switch calls
Press and hold to ignore/end calls
If the speaker does not respond properly (is “frozen” or “locked up”),
turn the speaker ON and insert the end of a paperclip or similar into the
Reset port on the back of the unit for a few seconds. A long beep
should confirm reset was successful.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : Bill Dickson
Create Date                     : 2015:12:17 11:10:04-05:00
Modify Date                     : 2015:12:17 11:10:04-05:00
XMP Toolkit                     : Adobe XMP Core 5.6-c015 81.157285, 2014/12/12-00:43:15
Creator Tool                    : Adobe Graphics Manager
Format                          : application/pdf
Creator                         : Bill Dickson
Title                           : iBT56 IB_12172015.ai
Producer                        : Acrobat Distiller 15.0 (Macintosh)
Document ID                     : uuid:4d809cf8-4051-fc43-b19f-7f3197d5c7a9
Instance ID                     : uuid:6613ee32-8cc9-8343-87b5-059faab977ee
Page Count                      : 2
EXIF Metadata provided by EXIF.tools
FCC ID Filing: EMOIBT56

Navigation menu