SDI Technologies IBT63 Bluetooth Mini Speaker User Manual iBT63 Eng IB 4 25 13

Download:
Mirror Download [FCC.gov]
Document ID	2031401
Application ID	CrrrUWsR8CLxjhhCWr+0UA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	184.93kB (2311576 bits)
Date Submitted	2013-08-02 00:00:00
Date Available	2013-08-02 00:00:00
Creation Date	2013-04-26 14:12:09
Producing Software	Adobe PDF library 9.90
Document Lastmod	2013-07-10 12:07:15
Document Title	iBT63 Eng IB 4-25-13
Document Creator	Adobe Illustrator CS5

Limited 1 Year Warranty Information
Maintenance
•
•
•
Place the unit on a level surface away from sources of direct sunlight or excessive heat.
Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth
or other protective material should be placed between it and the furniture.
Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning
agents, such as Benzene, thinner or similar materials can damage the surface of the unit.
A Consumer Guide to Product Safety
When used in the directed manner, this unit has been designed and manufactured to ensure
your personal safety. However, improper use can result in potential electrical shock or fire hazards.
Please read all safety and operating instructions carefully before installation and use, and keep
these instructions handy for future reference. Take special note of all warnings listed in these
instructions and on the unit.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
Water and Moisture – The unit should not be used near water. For example: near a
bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement.
Ventilation – The unit should be situated so that its location or position does not interfere
with its proper ventilation. For example, it should not be situated on a bed, sofa, rug or
similar surface that may block ventilation openings. Also, it should not be placed in a built-in
installation, such as a bookcase or cabinet, which may impede the flow of air through the
ventilation openings.
Heat – The unit should be situated away from heat sources such as radiators, heat registers,
stoves or other appliances (including amplifiers) that produce heat.
Power Sources – The unit should be connected to a power supply only of the type
described in the operating instructions or as marked on the appliance.
Power-Cable Protection – Power supply cables should be routed so that they are not
likely to be walked on or pinched by items placed upon or against them. It is always best
to have a clear area from where the cable exits the unit to where it is plugged into an AC
socket.
Cleaning – The unit should be cleaned only as recommended. See the Maintenance
section of this manual for cleaning instructions.
Objects and Liquid Entry – Care should be taken so that objects do not fall and liquids
are not spilled into any openings or vents located on the product.
Attachments – Do not use attachments not recommended by the product manufacturer.
Lightning and Power Surge Protection – Unplug the unit from the wall socket and
disconnect the antenna or cable system during a lightning storm or when it is left unattended
and unused for long periods of time. This will prevent damage to the product due to lightning
and power-line surges.
Overloading – Do not overload wall sockets, extension cords, or integral convenience
receptacles as this can result in a risk of fire or electric shock.
Damage Requiring Service – The unit should be serviced by qualified service personnel
when:
A. the power supply cable or plug has been damaged.
B. objects have fallen into or liquid has been spilled into the enclosure.
C. the unit has been exposed to rain.
D. the unit has been dropped or the enclosure damaged.
E. the unit exhibits a marked change in performance or does not operate normally.
Periods of Nonuse – If the unit is to be left unused for an extended period of time, such
as a month or longer, the power cable should be unplugged from the unit to prevent damage
or corrosion.
Servicing – The user should not attempt to service the unit beyond those methods described
in the user’s operating instructions. Service methods not covered in the operating instructions
should be referred to qualified service personnel.
Questions? Visit www.ihomeaudio.com
or call 1-800-288-2792 Toll Free
iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this
product to be free from defects in workmanship and materials, under normal use and conditions,
for a period of one (1) year from the date of original purchase.
Should this product fail to function in a satisfactory manner, it is best to first return it to the store
where it was originally purchased. Should this fail to resolve the matter and service still be required
by reason of any defect or malfunction during the warranty period, SDI will repair or, at its discretion,
replace this product without charge. This decision is subject to verification of the defect or malfunction
upon delivery of this product to the Factory Service Center authorized by SDI Customer Service.
The product must include proof of purchase, including date of purchase. An out-of-warranty fee
for service will be charged for units that are received without proof of purchase.
Before returning this product for service, please first replace the batteries (if applicable) with fresh
ones, as exhausted or defective batteries are the most common cause of problems encountered.
If service is still required:
1. Call SDI Customer Service at 1-800-288-2792 for Return Authorization and for the address
of the Factory Service Center.
2. Remove the batteries (if applicable) and pack the unit in a well padded, heavy corrugated box.
SDI is not responsible for damage that occurs during shipping to the Factory Service Center.
3. Enclose a photocopy of your sales receipt, credit card statement, or other proof of the date
of purchase, if within the warranty period. Also include your name and address information, a
brief description for why the unit is being returned, and the return authorization number. No
unit can be processed without a return authorization number.
4. Write the return authorization number on the side of the shipping package and send the unit
prepaid and insured to the Factory Service Center address authorized by SDI Customer
Service.
Disclaimer of Warranty
NOTE: This warranty is valid only if the product is used for the purpose for which it was designed.
It does not cover (i) products which have been damaged by negligence or willful actions, misuse
or accident, or which have been modified or repaired by unauthorized persons; (ii) cracked or
broken cabinets, or units damaged by excessive heat; (iii) damage to digital media players, CD’s
or tape cassettes (if applicable); (iv) the cost of shipping this product to the Factory Service Center
and its return to the owner.
This warranty is valid only in the United States of America and does not extend to owners of the
product other than to the original purchaser. In no event will SDI or any of its affiliates, contractors,
resellers, their officers, directors,
shareholders, members or agents be liable to you or any third party for any consequential or
incidental damages, any lost profits, actual, exemplary or punitive damages. (Some states do not
allow limitations on implied warranties or exclusion of consequential damages, so these restrictions
may not apply to you.) This warranty gives you specific legal rights, and you may also have other
rights which vary from state to state.
Your acknowledgement and agreement to fully and completely abide by the above mentioned
disclaimer of warranty is contractually binding to you upon your transfer of currency (money order,
cashier's check, or credit card) for purchase of your SDI product.
© 2013 SDI Technologies, Inc. All rights reserved
Questions? Visit www.ihomeaudio.com
or call 1-800-288-2792 Toll Free
Printed in China
iBT63-042613-A
This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
• Warning: Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
• NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada
IMPORTANT
Read before proceeding
If you have any question reagarding the operation or use of this product, please vist
www.ihomeaudio.com to view answers to frequently asked questions.
To learn more about this and other iHome products, please visit us online at www.ihomeaudio.com
For Models That Use Lithium Batteries:
• Lithium batteries can explode or cause burns if disassembled, shorted, recharged, exposed to
water, fire, or high temperatures & not handled appropriately
• Do not place loose batteries in a pocket, purse, or other container containing metal objects, do
not mix with used or other battery types, or store with hazardous or combustible materials.
• Store in cool, dry, ventilated area.
• Follow applicable laws and regulations for transport and disposal.
Locking and Unlocking the iBT63
Main Speaker
Connect 3.5mm audio cable
Companion Speaker
USB
Audio/
Charging
Jack
Bluetooth/Power
On/Off Switch
Bluetooth Mode
USB
Audio/Charging Jack
Power On/Off Switch
Main Speaker
Companion Speaker
To unlock and expand each speaker, grip the top and bottom and give a
small twist counter-clockwise. DO NOT pull hard once open, as the built in
spring will automatically extend the speaker to its proper position.
To compress and lock speaker, line up lock tab on speaker top with
lock/unlock icon on base. Press speaker down from the top and twist
clockwise to lock in place.
Using Bluetooth with the iBT63
• Plug one end of the included 3.5mm audio cable into the
Aux jack
on each speaker.
• Slide the Bluetooth/Power Off/On Switch on the Main speaker to the
Bluetooth position ( ). The light will flash blue as the speaker attempts
to auto-link with the last previously linked unit in range. If no device is
found within 10 seconds, the light will flash blue and red to indicate
pairing attempt.
• Place your audio device in Blueooth mode (often found in the device’s
Settings or Tools menu) and make it “discoverable”. “iHome iBT63”
should appear on your device. If “Not Connected” or similiar message
appears, select it to connect.
• Once paired, the light will glow solid blue and a confirmation beep will
sound. If pairing is not successful, turn the power OFF ( ) on the Main
speaker and repeat pairing procedure.
• To listen to Bluetooth audio, make sure the Main speaker is in Bluetooth
mode ( ) and the Companion speaker in ON ( ) mode.
• Control Bluetooth audio from your device.
Remember to turn off the speakers and your device after listening.
Using the iBT63 with Aux Devices
LED
Aux Jack
LED
• Connect a mini-USB plug to the
USB Audio/Charging jack on
each speaker.
• Connect the stereo 3.5mm audio plug to the headphone jack or line-out
of any audio device.
• Slide the Power Switch of each speaker to the ON ( ) position. The blue
power light will come on.
• Press play on your audio device and adjust its volume to listen to audio.
Aux Jack
Standard USB plug
Mini USB plug
Charging the iBT63
3.5mm audio plug
mobile phone
PSP
iPod
MP3/MP4
USB
PC
Laptop
Aux-in Mode
3.5mm audio cable
Charging the iBT63
The iBT63 is powered by a rechargeable battery in each speaker. When
the light flashes red, or if you start to notice sound distortion at higher
volumes, it's time to recharge the batteries.
• Connect a mini-USB plug to the input jack on each speaker.
• Connect the larger USB plug to a powered USB port, such as that on a
computer. The light on the speaker will turn to solid red while charging
and turn off when fully charged.
Note: you can continue to listen to the speakers while they are
charging.
The rechargeable battery in your speaker can only be replaced by
iHome Consumer Repair Department.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
XMP Toolkit                     : 3.1-702
Format                          : application/pdf
Title                           : iBT63 Eng IB 4-25-13
Creator Tool                    : Adobe Illustrator CS5
Create Date                     : 2013:04:26 14:12:09+08:00
Modify Date                     : 2013:07:10 12:07:15+08:00
Metadata Date                   : 2013:07:10 12:07:15+08:00
Thumbnail Width                 : 208
Thumbnail Height                : 256
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 20928 bytes, use -b option to extract)
Document ID                     : xmp.did:0880117407206811808381B0CF3CE6FA
Instance ID                     : uuid:72564ef0-5893-492f-83de-136af12c36a2
Original Document ID            : uuid:62C45CDF36E7DE11B3EDE6C75058782A
Rendition Class                 : proof:pdf
Derived From Instance ID        : uuid:a89fe86a-b513-274d-8176-3426caea05e2
Derived From Document ID        : xmp.did:F77F1174072068118083CA56D38194B4
Derived From Original Document ID: uuid:62C45CDF36E7DE11B3EDE6C75058782A
Derived From Rendition Class    : default
History Action                  : saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved
History Instance ID             : xmp.iid:F87F1174072068118C14BA54CF54AC0F, xmp.iid:06801174072068118083C77B2F5EB012, xmp.iid:07801174072068118083F3BBE0647796, xmp.iid:01801174072068118083F903D615CDD3, xmp.iid:171263BA1C20681180839CD7A586F5B9, xmp.iid:05B53D393C20681180839CD7A586F5B9, xmp.iid:F87F117407206811808382197468062C, xmp.iid:01801174072068118083FF4955E90EBA, xmp.iid:F77F117407206811822AF4F11C0CEABD, xmp.iid:F77F1174072068118083CA56D38194B4, xmp.iid:0880117407206811808381B0CF3CE6FA
History When                    : 2012:06:27 13:36:45-04:00, 2012:06:29 12:28:50+08:00, 2012:11:02 14:07:03+08:00, 2012:11:26 09:27:50-05:00, 2012:11:28 12:13:36+08:00, 2012:11:28 15:19:27+08:00, 2012:11:29 12:48:12-05:00, 2012:11:30 09:40:58+08:00, 2012:12:03 09:28:55-05:00, 2013:04:25 09:33:38+08:00, 2013:04:26 14:12:03+08:00
History Software Agent          : Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5
History Changed                 : /, /, /, /, /, /, /, /, /, /, /
Manifest Link Form              : EmbedByReference, EmbedByReference
Manifest Reference File Path    : /Users/yvonne/Desktop/iBT63/iBT63 IB:Print/IB Gaw/iBT63.jpg, /Users/yvonne/Desktop/iBT63/iBT63 IB:Print/IB Gaw/iBT63.jpg
Startup Profile                 : Print
N Pages                         : 1
Has Visible Transparency        : False
Has Visible Overprint           : True
Max Page Size W                 : 397.933333
Max Page Size H                 : 503.061111
Max Page Size Unit              : Millimeters
Font Name                       : ArialMT, Arial-BoldMT, Arial-Black, ArialNarrow, Helvetica-Light, Helvetica, Helvetica-Bold, HelveticaNeue-Heavy, HelveticaNeue-HeavyItalic, HelveticaNeue-Light, HelveticaNeue-LightItalic, MyriadPro-Regular
Font Family                     : Arial, Arial, Arial Black, Arial Narrow, Helvetica, Helvetica, Helvetica, Helvetica Neue, Helvetica Neue, Helvetica Neue, Helvetica Neue, Myriad Pro
Font Face                       : Regular, Bold, Regular, Regular, Light, Regular, Bold, 85 Heavy, 86 Heavy Italic, Light, Light Italic, Regular
Font Type                       : Open Type, Open Type, Open Type, Open Type, TrueType, TrueType, TrueType, Type 1, Type 1, TrueType, TrueType, Open Type
Font Version                    : Version 5.01.2x, Version 5.01.2x, Version 5.00.1x, Version 2.38.1x, 7.0d20e1, 3.0, 7.0d20e1, 001.000, 001.100, 7.0d27e1, 7.0d27e1, Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895
Font Composite                  : False, False, False, False, False, False, False, False, False, False, False, False
Font File Name                  : Arial.ttf, Arial Bold.ttf, Arial Black.ttf, Arial Narrow.ttf, Helvetica.dfont, Helvetica tt, Helvetica.dfont, HelveNeuHea; HelveticaNeue Heavy, HelveNeuHeaIta; HelveticaNeue HeavyItalic, HelveticaNeue.dfont, HelveticaNeue.dfont, MyriadPro-Regular.otf
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Groups Group Name        : Default Swatch Group
Swatch Groups Group Type        : 0
Swatch Groups Colorants Tint    : 100.000000
Swatch Groups Colorants Cyan    : 80.000000
Swatch Groups Colorants Magenta : 5.000001
Swatch Groups Colorants Yellow  : 10.000002
Swatch Groups Colorants Black   : 0.000000
Swatch Groups Colorants Swatch Name: K=5
Swatch Groups Colorants Mode    : GRAY
Swatch Groups Colorants Type    : PROCESS
Swatch Groups Colorants Gray    : 12
Producer                        : Adobe PDF library 9.90
Page Count                      : 1
Creator                         : Adobe Illustrator CS5

EXIF Metadata provided by EXIF.tools