SDI Technologies IBT65 Bluetooth Rechargeable Mini Speaker User Manual iBT65 IB Eng 12 30 13 copy

Download:
Mirror Download [FCC.gov]
Document ID	2161021
Application ID	/uHOtWamU7k6Qd/JHIG7ww==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	40.78kB (509754 bits)
Date Submitted	2014-01-09 00:00:00
Date Available	2014-01-09 00:00:00
Creation Date	2013-12-30 14:45:22
Producing Software	Adobe PDF library 10.01
Document Lastmod	2013-12-30 14:45:22
Document Title	iBT65 IB Eng 12-30-13 copy
Document Creator	Adobe Illustrator CC (Macintosh)

Model: iBT65 (Front)
IB (English)
Size: 324Wmm x 184Hmm
Color: Print in Black color
Date: Dec 30, 2013
Maintenance
•
•
•
Place the unit on a level surface away from sources of direct sunlight or excessive heat.
Protect your furniture when placing your unit on a natural wood and lacquered finish. A
cloth or other protective material should be placed between it and the furniture.
Clean your unit with a soft cloth moistened only with mild soap and water. Stronger
cleaning agents such as thinner or similar materials can damage the surface of the unit.
For Models That Use Lithium Batteries:
• Lithium batteries can explode or cause burns if disassembled, shorted, recharged,
exposed to water, fire, or high temperatures & not handled appropriately
• Do not place loose batteries in a pocket, purse, or other container containing metal
objects, do not mix with used or other battery types, or store with hazardous or
combustible materials.
• Store in cool, dry, ventilated area.
• Follow applicable laws and regulations for transport and disposal.
Limited 1 Year Warranty Information
A Consumer Guide to Product Safety
iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this
product to be free from defects in workmanship and materials, under normal use and conditions,
for a period of one (1) year from the date of original purchase.
Should this product fail to function in a satisfactory manner, it is best to first return it to the store
where it was originally purchased. Should this fail to resolve the matter and service still be required
by reason of any defect or malfunction during the warranty period, SDI will repair or, at its discretion,
replace this product without charge. This decision is subject to verification of the defect or
malfunction upon delivery of this product to the Factory Service Center authorized by SDI Customer
Service. The product must include proof of purchase, including date of purchase. An out-of-warranty
fee for service will be charged for units that are received without proof of purchase.
Before returning this product for service, please first replace the batteries (if applicable) with fresh
ones, as exhausted or defective batteries are the most common cause of problems encountered.
If service is still required:
When used in the directed manner, this unit has been designed and manufactured to ensure
your personal safety. However, improper use can result in potential electrical shock or fire hazards.
Please read all safety and operating instructions carefully before installation and use, and keep
these instructions handy for future reference. Take special note of all warnings listed in these
instructions and on the unit.
1.
2.
1. Call SDI Customer Service at 1-800-288-2792 for Return Authorization and for the address
of the Factory Service Center.
2. Remove the batteries (if applicable) and pack the unit in a well padded, heavy corrugated box. 3.
SDI is not responsible for damage that occurs during shipping to the Factory Service Center.
4.
3. Enclose a photocopy of your sales receipt, credit card statement, or other proof of the date
of purchase, if within the warranty period. Also include your name and address information, a 5.
brief description for why the unit is being returned, and the return authorization number. No
unit can be processed without a return authorization number.
4. Write the return authorization number on the side of the shipping package and send the unit
prepaid and insured to the Factory Service Center address authorized by SDI Customer
Service.
Disclaimer of Warranty
NOTE: This warranty is valid only if the product is used for the purpose for which it was designed.
It does not cover (i) products which have been damaged by negligence or willful actions, misuse
or accident, or which have been modified or repaired by unauthorized persons; (ii) cracked or
broken cabinets, or units damaged by excessive heat; (iii) damage to digital media players, CD’s
or tape cassettes (if applicable); (iv) the cost of shipping this product to the Factory Service Center
and its return to the owner.
This warranty is valid only in the United States of America and does not extend to owners of the
product other than to the original purchaser. In no event will SDI or any of its affiliates, contractors,
resellers, their officers, directors,
shareholders, members or agents be liable to you or any third party for any consequential or
incidental damages, any lost profits, actual, exemplary or punitive damages. (Some states do not
allow limitations on implied warranties or exclusion of consequential damages, so these restrictions
may not apply to you.) This warranty gives you specific legal rights, and you may also have other
rights which vary from state to state.
Your acknowledgement and agreement to fully and completely abide by the above mentioned
disclaimer of warranty is contractually binding to you upon your transfer of currency (money order,
cashier's check, or credit card) for purchase of your SDI product.
6.
7.
8.
9.
10.
11.
12.
13.
© 2014 SDI Technologies, Inc. All rights reserved
Water and Moisture – The unit should not be used near water. For example: near a
bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement.
Ventilation – The unit should be situated so that its location or position does not interfere
with its proper ventilation. For example, it should not be situated on a bed, sofa, rug or
similar surface that may block ventilation openings. Also, it should not be placed in a built-in
installation, such as a bookcase or cabinet, which may impede the flow of air through the
ventilation openings.
Heat – The unit should be situated away from heat sources such as radiators, heat registers,
stoves or other appliances (including amplifiers) that produce heat.
Power Sources – The unit should be connected to a power supply only of the type
described in the operating instructions or as marked on the appliance.
Power-Cable Protection – Power supply cables should be routed so that they are not
likely to be walked on or pinched by items placed upon or against them. It is always best
to have a clear area from where the cable exits the unit to where it is plugged into an AC
socket.
Cleaning – The unit should be cleaned only as recommended. See the Maintenance
section of this manual for cleaning instructions.
Objects and Liquid Entry – Care should be taken so that objects do not fall and liquids
are not spilled into any openings or vents located on the product.
Attachments – Do not use attachments not recommended by the product manufacturer.
Lightning and Power Surge Protection – Unplug the unit from the wall socket and
disconnect the antenna or cable system during a lightning storm or when it is left unattended
and unused for long periods of time. This will prevent damage to the product due to lightning
and power-line surges.
Overloading – Do not overload wall sockets, extension cords, or integral convenience
receptacles as this can result in a risk of fire or electric shock.
Damage Requiring Service – The unit should be serviced by qualified service personnel
when:
A. the power supply cable or plug has been damaged.
B. objects have fallen into or liquid has been spilled into the enclosure.
C. the unit has been exposed to rain.
D. the unit has been dropped or the enclosure damaged.
E. the unit exhibits a marked change in performance or does not operate normally.
Periods of Nonuse – If the unit is to be left unused for an extended period of time, such
as a month or longer, the power cable should be unplugged from the unit to prevent damage
or corrosion.
Servicing – The user should not attempt to service the unit beyond those methods described
in the user’s operating instructions. Service methods not covered in the operating instructions
should be referred to qualified service personnel.
Questions? Visit www.ihome.com
or call 1-800-288-2792 Toll Free
iBT65-123013-A
Model iBT65
Bluetooth
Rechargeable
Mini Speaker
FCC ID:EMOIBT65
FCC IC:986B-IBT65
Printed in China
Questions? Visit www.ihome.com
FCC Information
FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment. This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to
the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired
operation of the device.
The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and
compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and
compliance.
This device complies with Part 15 of the FCC Rules, operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
• Warning: Changes or modifications to this unit not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
• NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAN ICES-3 (B)/NMB-3(B)
IMPORTANT
Read before proceeding
If you have any question regarding the operation or use of this product, please visit www.ihome.com
to view answers to frequently asked questions.
To learn more about this and other iHome products, please visit us online at www.ihome.com
Model: iBT65 (Back)
IB (English)
Size: 324Wmm x 184Hmm
Color: Print in Black color
Date: Dec 30, 2013
Locking and Unlocking the iBT65
Speaker back view
Speaker front view
To unlock and expand the speaker, grip the top and bottom and give a
small twist counter-clockwise. DO NOT pull hard once open, as the built
in spring will automatically extend the speaker to its proper position.
To compress and lock speaker, line up lock tab on speaker top with
lock/unlock icon on base. Press speaker down from the top and twist
clockwise to lock in place.
Using Bluetooth with the iBT63
Using Bluetooth with the iBT65
Bluetooth Mode
USB
Audio/Charging Jack
Power Off/On/
Bluetooth Switch
Aux Jack
LED
• Slide the Bluetooth/Aux/Off Switch on the speaker to the Bluetooth
position ( ). The light will flash blue as the speaker attempts to auto-link
with the last previously linked unit in range (30 feet).
• Place your audio device in Bluetooth mode (often found in the device’s
Settings or Tools menu) and make it “discoverable”. “iHome iBT65”
should appear on your device. If “Not Connected” or similar message
appears, select it to connect. If your device asks for a passcode, enter
‘1234’.
• Once paired, the light will glow solid blue and a confirmation beep will
sound. If pairing is not successful, turn the power OFF ( ) on the speaker and repeat pairing procedure.
• To listen to Bluetooth audio, make sure the speaker is in Bluetooth
mode ( ).
• Control Bluetooth audio from your device.
Remember to turn off the speaker and your device after listening.
NOTE: When unit is charging, the blue light will appear solid red.
Using the iBT65 with Aux Devices
Charging the iBT65
Mini USB plug
3.5mm audio
plug
Standard
USB plug
mobile phone
PSP
iPod
PC
MP3/MP4
Computer connected
to working outlet
USB AC adaptor
(not included)
Laptop
Aux-in Mode
Combination cable
USB AC adaptor
connected to working outlet
Computer USB port
• Connect the mini-USB plug to the
USB Audio/Charging jack on
the speaker.
• Connect the stereo 3.5mm audio plug to the headphone jack or line-out
of any audio device.
• Slide the Bluetooth/Aux/Off Switch on the speaker to the ON ( )
position. The blue power light will come on.
• Press play on your audio device and adjust its volume to listen to audio.
• If you wish to “daisychain” iBT65 speakers, connect the 3.5mm audio
plug to the Line Out Jack on an iBT65 that is already connected to an
audio source (see above) and the mini-USB plug to the audio input jack
on another iBT65.
Charging the iBT65
The iBT65 is powered by a rechargeable battery in the speaker. When the
light flashes red, or if you start to notice sound distortion at higher
volumes, it's time to recharge the batteries.
• Connect the mini-USB plug to the
USB Audio/Charging jack on
the speaker.
• Connect the larger USB plug to a powered USB port, such as that on a
computer. Your computer should be connected to a wall outlet when
speaker is charging. The light on the speaker will turn to solid red while
charging and turn off when fully charged.
Note: You can continue to listen to the speakers while they are charging.
The rechargeable battery in your speaker can only be replaced by
iHome Consumer Repair Department.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 5.5-c014 79.151739, 2013/04/03-12:12:15
Format                          : application/pdf
Title                           : iBT65 IB Eng 12-30-13 copy
Creator Tool                    : Adobe Illustrator CC (Macintosh)
Create Date                     : 2013:12:30 14:45:22+08:00
Modify Date                     : 2013:12:30 14:45:22+08:00
Metadata Date                   : 2013:12:30 14:45:22+08:00
Thumbnail Width                 : 208
Thumbnail Height                : 256
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 21276 bytes, use -b option to extract)
Document ID                     : xmp.did:b75e8e95-70f3-4ed3-a428-5567cde88592
Instance ID                     : uuid:11ab8748-fc14-5c45-905a-77b099c27559
Original Document ID            : uuid:62C45CDF36E7DE11B3EDE6C75058782A
Rendition Class                 : proof:pdf
Derived From Instance ID        : uuid:c823b185-d4ae-ef44-bbfb-8142a2904320
Derived From Document ID        : xmp.did:84f29369-7679-45fa-a051-b80b9f9d5c17
Derived From Original Document ID: uuid:62C45CDF36E7DE11B3EDE6C75058782A
Derived From Rendition Class    : default
History Action                  : saved, saved
History Instance ID             : xmp.iid:F87F1174072068118C14BA54CF54AC0F, xmp.iid:b75e8e95-70f3-4ed3-a428-5567cde88592
History When                    : 2012:06:27 13:36:45-04:00, 2013:12:30 14:45:17+08:00
History Software Agent          : Adobe Illustrator CS5, Adobe Illustrator CC (Macintosh)
History Changed                 : /, /
Startup Profile                 : Print
N Pages                         : 1
Has Visible Transparency        : True
Has Visible Overprint           : True
Max Page Size W                 : 397.933333
Max Page Size H                 : 503.061111
Max Page Size Unit              : Millimeters
Font Name                       : ArialMT, Arial-BoldMT, Arial-Black, ArialNarrow, Futura-Light, Helvetica-Light, Helvetica, Helvetica-Bold, HelveticaNeue-Heavy, HelveticaNeue-HeavyItalic, HelveticaNeue-Light, HelveticaNeue-LightItalic
Font Family                     : Arial, Arial, Arial Black, Arial Narrow, Futura, Helvetica, Helvetica, Helvetica, Helvetica Neue, Helvetica Neue, Helvetica Neue, Helvetica Neue
Font Face                       : Regular, Bold, Regular, Regular, Light, Light, Regular, Bold, 85 Heavy, 86 Heavy Italic, Light, Light Italic
Font Type                       : Open Type, Open Type, Open Type, Open Type, Type 1, TrueType, TrueType, TrueType, Type 1, Type 1, TrueType, TrueType
Font Version                    : Version 5.06, Version 5.06, Version 5.00.1x, Version 2.38.1x, 001.000, 7.0d20e1, 3.0, 7.0d20e1, 001.000, 001.100, 7.0d27e1, 7.0d27e1
Font Composite                  : False, False, False, False, False, False, False, False, False, False, False, False
Font File Name                  : Arial.ttf, Arial Bold.ttf, Arial Black.ttf, Arial Narrow.ttf, FuturLig; L Futura Light, Helvetica.dfont, Helvetica tt, Helvetica.dfont, HelveNeuHea; HelveticaNeue Heavy, HelveNeuHeaIta; HelveticaNeue HeavyItalic, HelveticaNeue.dfont, HelveticaNeue.dfont
Plate Names                     : Cyan, Magenta, Yellow, Black, 30% Grey.spot, 60% Grey.spot, 20% Grey.spot, 40% Grey.spot, 10% Grey.spot
Swatch Groups Group Name        : Default Swatch Group
Swatch Groups Group Type        : 0
Swatch Groups Colorants Gray    : 12
Swatch Groups Colorants Swatch Name: 20% Grey.spot
Swatch Groups Colorants Type    : SPOT
Swatch Groups Colorants Tint    : 100.000000
Swatch Groups Colorants Mode    : CMYK
Swatch Groups Colorants Cyan    : 0.000000
Swatch Groups Colorants Magenta : 0.000000
Swatch Groups Colorants Yellow  : 0.000000
Swatch Groups Colorants Black   : 20.000000
Producer                        : Adobe PDF library 10.01
Page Count                      : 1
Creator                         : Adobe Illustrator CC (Macintosh)

EXIF Metadata provided by EXIF.tools