SDI Technologies IBT68 Color Changing Rechargeable Bluetooth Speaker with Speakerphone User Manual iBT68 IB 0128

SDI Technologies Inc. Color Changing Rechargeable Bluetooth Speaker with Speakerphone iBT68 IB 0128

User Manual

Download: SDI Technologies IBT68 Color Changing Rechargeable Bluetooth Speaker with Speakerphone User Manual iBT68 IB 0128
Mirror Download [FCC.gov]SDI Technologies IBT68 Color Changing Rechargeable Bluetooth Speaker with Speakerphone User Manual iBT68 IB 0128
Document ID2914761
Application IDCRAGYEdfo3RrW2+YROTPtQ==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize27.06kB (338302 bits)
Date Submitted2016-02-29 00:00:00
Date Available2016-02-29 00:00:00
Creation Date2016-01-28 10:47:59
Producing SoftwareAdobe PDF library 15.00
Document Lastmod2016-01-28 10:47:59
Document TitleiBT68 IB 0128
Document CreatorAdobe Illustrator CC 2015 (Macintosh)

iBT68 EN-IB
Size: 214mm x 252mm
Printing color: Black
Jan 28, 2016
100gsm2 WF (書紙)
iBT68 EN-IB
Size: 214mm x 252mm
Printing color: Black
Jan 22, 2016
100gsm2 WF (書紙)
Limited 1 Year Warranty
iBT68-160128-B (EN)
© 2016 SDI Technologies, Inc. All rights reserved
Questions? Visit www.ihome.com
or call 1-800-288-2792 Toll Free
Thank you for purchasing the iHome iBT68. This product is designed to provide high quality wireless
sound for your Bluetooth audio device. This instruction booklet explains the basic operation and care of
the unit. Please read them carefully and keep for future reference.
Color Changing
Rechargeable
Bluetooth Speaker
with Speakerphone
Maintenance
When used in the directed manner, this unit has been designed and manufactured to ensure your personal
safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety
and operating instructions carefully before installation and use, and keep these instructions handy for future
reference. Take special note of all warnings listed in these instructions and on the unit.
1. Water and Moisture – DO NOT use near water. Keep away from wash basins, showers, sinks, etc.
2. Ventilation – The unit should be situated so that its location or position does not interfere with its proper
ventilation. For example, it should not be situated on a bed, sofa, rug or similar surface that may block
ventilation openings.
3. Heat – The unit should be situated away from heat sources such as radiators, heat registers, stoves or
other appliances (including amplifiers) that produce heat.
4. Power Sources – The unit should be connected to a power supply only of the type described in the
operating instructions or as marked on the appliance.
5. Cleaning – The unit should be cleaned only using a warm damp cloth. Do not use solvents, etc.
6. Objects and Liquid Entry – Care should be taken so that objects do not fall and liquids are not spilled
into any openings or vents located on the product.
7. Attachments – Do not use attachments not recommended by the product manufacturer.
8. Lightning and Power Surge Protection – Unplug the unit from the wall socket and disconnect the antenna
or cable system during a lightning storm or when it is left unattended and unused for long periods of time.
This will prevent damage to the product due to lightning and power-line surges.
9. Overloading – Do not overload wall sockets, extension cords, or integral convenience receptacles as
this can result in a risk of fire or electric shock.
10. Damage Requiring Service – The unit should be serviced by qualified service personnel when:
A. the power supply cable or plug has been damaged.
B. objects have fallen into or liquid has been spilled into the enclosure.
C. the unit has been exposed to rain.
D. the unit has been dropped or the enclosure damaged.
E. the unit exhibits a marked change in performance or does not operate normally.
12. Periods of Nonuse – If the unit is to be left unused for an extended period of time, such as a month or
longer, fully charge the unit before storing.
13. Servicing – The user should not attempt to service the unit beyond those methods described in the user’s
operating instructions. Service methods not covered in the operating instructions should be referred to
qualified service personnel.
Questions? Visit www.ihome.com
or call 1-800-288-2792 Toll Free
Internal Rechargeable Lithium-ion Battery
This device uses an internal rechargeable lithium-ion battery that should last the lifetime of the device. If you
suspect your battery may be dead, try charging it several times. If the battery does not recharge, please contact
Customer Service at 1-800-288-2792.
WARNING/DISPOSAL OF UNIT
Please do NOT attempt to change the battery yourself. Doing so may damage the unit and will void your warranty.
• Never dispose of used batteries/electronics with ordinary solid wastes, since they contain toxic substances.
• Always dispose of used batteries/electronics in accordance with the prevailing community regulations that apply
to the disposal of batteries/electronics. If there are no local regulations concerning battery/electronics disposal,
please dispose of the device in a waste bin for electronic devices.
• Many electronics retailers now recycle batteries and other electronic components at no charge. Check to see
which ones in your area do so.
CAUTION
The battery used in this device may present a risk of fire, explosion or chemical burn if
mistreated
• Never use or charge the battery if it appears to be leaking, discolored, deformed, or in any way abnormal.
• Never disassemble the unit or attempt to remove battery as that could cause leakage of alkaline solution or other
electrolytic substance.
• Always confirm that the temperature is 5°C – 35° C (41° - 95° Fahrenheit) before you charge the battery.
Leakage or deterioration of the battery may occur if this warning is not heeded.
• Never expose the battery to any liquid.
• Never expose the battery to excessive heat such as direct sunlight or fire. Never use the battery pack in an
unventilated vehicle where excessive internal temperatures may be encountered.
• Always keep the battery out of the reach of infants and small children.
2. Slide the Power Off/On Switch to ON to turn on the iBT68. The first time the unit is
powered on, it will enter auto-pairing mode and attempt to connect to a Bluetooth
device (if so, skip to step 4). Otherwise, follow step 3 to begin pairing.
3. Press and hold the Bluetooth Button for 2 seconds. The iBT68 will beep and the
Bluetooth status indicator light on top of the unit will flash quickly.
4. “iHome iBT68” should appear in your device’s Bluetooth menu. If “Not Paired”, “Not Connected” or similar
message appears, select “iHome iBT68” to connect it. If prompted for a passcode, enter “1234” on your
device’s keypad.
• USB charging cable
CHARGE
BEFORE
USE
For iPhone
iBT68 speaker
Questions? Visit www.ihome.com or call 1-800-288-2792 Toll Free
FCC Information
FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
iBT68
Top
Front
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
•
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules.
Blue Bluetooth Status
Indicator Light
Red Charging Status
Indicator Light
Bottom
NOTE: The unit must be powered on and linked to a Bluetooth phone to receive a call.
1. When a call is received, playing music is muted to hear the ring tone and the Bluetooth status
indicator flashes 3X. Press the
Bluetooth/Speakerphone Button to answer the call.
Back
2. When a call is completed, press the
previous function.
Bluetooth/
Speakerphone
Button
Power off/on Switch
Jan 28, 2016
Charging
USB port
Color Mode
Button
Bluetooth/Speakerphone Button to end the call and resume
Jan 28, 2016
01/19/2016
2. Connect the standard USB plug end of the cable to a powered USB port on a computer, a USB AC
adaptor or other USB charging device. For first time use, charge unit for about 4 hours. The red
charging status indicator LED on top right of the unit blinks when battery needs charging, turns solid
while charging and turns off once unit is fully charged.
iHome iBT68 USB port
Computer
connected to
working outlet
Jan 28, 2016
USB AC adaptor
(not included)
USB AC adaptor
connected to working outlet
Computer USB port
TIP: On some iOS (Apple) devices, you can
view the iBT68 battery status on your
deviceʼs screen. When device is paired and
connected, look for a vertical battery icon
next to the Bluetooth icon on the upper right
corner of the deviceʼs screen.
Troubleshooting
Unit doesn’t respond (no power)
1. Connect the micro USB plug on the included USB cable to the micro USB Charging Port on the side
of the unit.
Charge via computer USB port, USB AC adaptor or other powered USB port
The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with
RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance.
Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la section 2.5 de RSS 102 et la
conformité à l'exposition de RSS-102 rf, utilisateurs peut obtenir l'information canadienne sur l'exposition et la
conformité de rf.
There are five color modes, which you cycle through in this order:
a. Slow Fade (colors slowly fade from one into the next b. Fast Change (colors change rapidly)
c. One Color (select a favorite color)
d. Pulse to Music (lights flash to the beat of the music)
e. Off (no display)
1. Slide the Power On/Off Switch to ON to turn the unit ON.
2. Press the
Color Mode Button repeatedly to cycle to the desired color mode. For One Color mode, first cycle
to Fast Change mode then press the Color Mode Button when the desired color appears. For Pulse to Music,
make sure the volume on your connected Bluetooth device is above 50%.
3. When done, slide the Power On/Off Switch to OFF to turn the unit OFF.
CHARGE UNIT BEFORE USE/KEEP UNIT OFF FOR FASTER CHARGING
IC Statement
Declaration ID: D025616
When you power ON the speaker, it will automatically link with the previously paired Bluetooth device
as long as that device is still within range (approx. 30 feet). To pair with a different device follow steps
1 - 4 under ”Pairing Your Device” on previous page.
Speakerphone Operation
Microphone
Charging the Unit
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This
equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and
your body.
Cet émetteur ne doit pas être Co-placé ou ne fonctionnant en même temps qu'aucune autre antenne ou émetteur.
Cet équipement devrait être installé et actionné avec une distance minimum de 20 centimètres entre le radiateur
et votre corps.
Pairing with a Different Device
Using Color Modes
CAN ICES-3 (B)/NMB-3(B)
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage,
et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
iHome iBT68
iHome iBT68
1. Slide the Power Off/On Switch to ON to turn on the unit. The Bluetooth status indicator will glow
solid blue when a linked device is in range and detected. You can then listen to audio streamed
wirelessly from your paired Bluetooth device.
2. Use controls on your Bluetooth device to adjust volume and to play, pause and navigate tracks.
3. When done listening, slide the Power Off/On Switch to OFF turn the unit OFF.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also
complies with Part 15 of the FCC RF Rules. This equipment must be installed and operated in accordance with
provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance
of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna
or transmitter. End-users and installers must be provided with antenna installation instructions and consider removing
the no-collocation statement.
For other
Playing Audio Via Bluetooth
Jan 28, 2016
This device complies with Part 15 of the FCC Rules, operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
•
iHome iBT68
Meet Your iBT68
FCC ID: EMOIBT68
IC: 986B-IBT68
iHome iBT68
5. If pairing is successful, 1 beep will sound and the Bluetooth status indicator light will appear solid blue,
indicating the iBT68 is ready to play music. There should also be an indication on your device. If no
device is successfully paired within 3 minutes the iBT68 will default to previous mode. Once the iBT68 is
paired to a device, it will attempt to autolink when the device is within range (about 30 feet).
USB charging cable
instruction manual
IMPORTANT SAFETY INSTRUCTIONS
1. Turn on your Bluetooth device and make it “discoverable” by turning on Bluetooth
mode (check in Options or Settings).
• Place the unit on a level surface away from sources of direct sunlight or excessive heat.
• Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth or other
protective material should be placed between it and the furniture.
• Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents,
such as thinner or similar materials can damage the surface of the unit.
iBT68
iBT68
Pairing is the set-up process to introduce your Bluetooth-capable device to the iBT68. Once your device is
paired, the iBT68 can recognize it and you can play your audio through it.
• iBT68 speaker
Printed in China
Using the
Pairing Your Device
What’s Included
Consumer Product Safety Guide
iBT68
Introduction
Model: iBT68
iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects
in workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original
purchase.
iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects
in workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original
purchase. Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally
purchased. Should this fail to resolve the matter and service still be required by reason of any defect or malfunction during
the warranty period, SDI will repair or, at its discretion, replace this product without charge. This decision is subject to
verification of the defect or malfunction upon delivery of this product to the Factory Service Center authorized by Customer
Service.
If service is required, please call Customer Service at 1-800-288-2792 to obtain a Return Authorization Number and shipping
instructions.
Disclaimer of Warranty
NOTE: This warranty is valid only if the product is used for the purpose for which it was designed. It does not cover (i) products
which have been damaged by negligence or willful actions, misuse or accident, or which have been modified or repaired
by unauthorized persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage to digital media
players, CD’s or tape cassettes (if applicable); (iv) the cost of shipping this product to the Factory Service Center and its return
to the owner.
This warranty is valid only in the United States of America and does not extend to owners of the product other than to the
original purchaser. In no event will SDI or any of its affiliates, contractors, resellers, their officers, directors, shareholders,
members or agents be liable to you or any third party for any consequential or incidental damages, any lost profits, actual,
exemplary or punitive damages. (Some states do not allow limitations on implied warranties or exclusion of consequential
damages, so these restrictions may not apply to you.) This warranty gives you specific legal rights, and you may also have
other rights which vary from state to state.
Your acknowledgement and agreement to fully and completely abide by the above mentioned disclaimer of warranty is
contractually binding to you upon your transfer of currency (money order, cashier's check, or credit card) for purchase of your
SDI product.
iHome iBT68 USB port
•
•
•
•
Make sure unit is completely charged.
Check that all connections are correct and properly plugged in.
Make sure your device is properly paired with the iBT68.
Make sure the unit is on.
Unit doesn’t respond (locked up/ “frozen”)
If the unit does not respond, try resetting the unit. Press and hold the Bluetooth Button for10 seconds.
Note that doing so will clear settings, and any Bluetooth devices will need to be re-paired.
Trouble pairing device with iBT68
Bluetooth implementation varies depending on your device’s hardware and operating system. Please see
our website for updates on pairing.
• When you power ON the speaker, it will automatically link with the last previously paired Bluetooth
device if the device is still within range (approx. 30 feet). To pair with a different device you must turn
off Bluetooth capability on the already paired device, or take it out of range.
• If your device does not auto-link when within range, re-pair the device. To do so, first delete the iBT68
from your Bluetooth devices menu.
• Make sure your device is working properly. Check your device’s manual for details on Bluetooth pairing
and linking.
For further information and to see the latest instructions, visit www.ihome.com/support
01/19/2016
no call waiting
function

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.6-c067 79.157747, 2015/03/30-23:40:42
Format                          : application/pdf
Title                           : iBT68 IB 0128
Metadata Date                   : 2016:01:28 10:47:59+08:00
Modify Date                     : 2016:01:28 10:47:59+08:00
Create Date                     : 2016:01:28 10:47:59+08:00
Creator Tool                    : Adobe Illustrator CC 2015 (Macintosh)
Thumbnail Width                 : 256
Thumbnail Height                : 52
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 3744 bytes, use -b option to extract)
Instance ID                     : uuid:39ede7d9-2efa-a940-8b17-81dd92e4e742
Document ID                     : xmp.did:756e3658-ff00-43c4-be2e-6a201089efa4
Original Document ID            : uuid:5B20892493BFDB11914A8590D31508C8
Rendition Class                 : proof:pdf
Derived From Instance ID        : uuid:59dda5e9-741f-f04d-b0ec-ea279aa436db
Derived From Document ID        : xmp.did:52ee76e9-2053-4762-ae6e-c2b1669b1f1d
Derived From Original Document ID: uuid:5B20892493BFDB11914A8590D31508C8
Derived From Rendition Class    : default
History Action                  : saved, saved
History Instance ID             : xmp.iid:FD7F1174072068118083A0F3A15A5CAC, xmp.iid:756e3658-ff00-43c4-be2e-6a201089efa4
History When                    : 2010:10:12 11:33:38+08:00, 2016:01:28 10:47:52+08:00
History Software Agent          : Adobe Illustrator CS5, Adobe Illustrator CC 2015 (Macintosh)
History Changed                 : /, /
Manifest Link Form              : EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference
Manifest Reference File Path    : /Users/charlielaw/Desktop/Artwork/iBT68/iBT68 REN v1.png, /Users/deonleung/Desktop/Pairing screen images/iPhone-connected.psd, /Users/deonleung/Desktop/Pairing screen images/iPhone-not_paired.psd, /Users/deonleung/Desktop/Pairing screen images/other_connect.psd, /Users/deonleung/Desktop/Pairing screen images/other-not_pair.psd, /Volumes/SDI/SDI_Misc/iHome/Quick Start Guide Workgroup/Images/NFC Phone images/NFC setting.png
Ingredients File Path           : /Users/charlielaw/Desktop/Artwork/iBT68/iBT68 REN v1.png, /Users/deonleung/Desktop/Pairing screen images/iPhone-connected.psd, /Users/deonleung/Desktop/Pairing screen images/iPhone-not_paired.psd, /Users/deonleung/Desktop/Pairing screen images/other_connect.psd, /Users/deonleung/Desktop/Pairing screen images/other-not_pair.psd, /Volumes/SDI/SDI_Misc/iHome/Quick Start Guide Workgroup/Images/NFC Phone images/NFC setting.png
Startup Profile                 : Basic CMYK
Has Visible Overprint           : True
Has Visible Transparency        : True
N Pages                         : 1
Max Page Size W                 : 527.950385
Max Page Size H                 : 305.531907
Max Page Size Unit              : Millimeters
Font Name                       : ArialMT, Futura-Light, Futura-LightOblique, Futura-Book, Futura, Futura-Bold, Futura-Medium, HelveticaNeue-HeavyItalic, HelveticaNeue, MyriadPro-Regular, MyriadPro-Bold, KozGoPro-Regular
Font Family                     : Arial, Futura, Futura, Futura, Futura, Futura, Futura, Helvetica Neue, Helvetica Neue, Myriad Pro, Myriad Pro, KozGoPro Regular-83pv-RKSJ-H
Font Face                       : Regular, Light, Light Oblique, Book, Medium, Bold, Medium, 86 Heavy Italic, Regular, Regular, Bold, Regular-83pv-RKSJ-H
Font Type                       : Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, TrueType, Type 1, TrueType, Open Type, Open Type, Unknown
Font Version                    : Version 5.06, OTF 1.0;PS 001.002;Core 1.0.22, OTF 1.0;PS 001.002;Core 1.0.22, OTF 1.0;PS 001.002;Core 1.0.22, OTF 1.0;PS 001.002;Core 1.0.22, OTF 1.0;PS 001.003;Core 1.0.22, 9.0d2e1, 001.100, 10.0d36e1, Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895, Version 2.115;PS 2.000;hotconv 1.0.81;makeotf.lib2.5.63406, Version 6.020;PS 6.008;hotconv 1.0.70;makeotf.lib2.5.5900
Font Composite                  : False, False, False, False, False, False, False, False, False, False, False, False
Font File Name                  : Arial.ttf, Futura-Light.otf, Futura-LightOblique.otf, Futura-Book.otf, Futura-Medium.otf, Futura-Bold.otf, Futura.ttc, HelveNeuHeaIta; Helvetica NeueLt:Med:Heavy, HelveticaNeue.dfont, MyriadPro-Regular.otf, .6846.otf, KozGoPr6N-Regular.otf
Plate Names                     : Cyan, Magenta, Yellow, Black, 60% Grey.spot, 10% Grey.spot, 20% Grey.spot, 30% Grey.spot, 40% Grey.spot
Swatch Groups Group Name        : Default Swatch Group
Swatch Groups Group Type        : 0
Swatch Groups Colorants Swatch Name: Deleted Global Color 46
Swatch Groups Colorants Type    : SPOT
Swatch Groups Colorants Tint    : 100.000000
Swatch Groups Colorants Mode    : CMYK
Swatch Groups Colorants Cyan    : 100.000000
Swatch Groups Colorants Magenta : 100.000000
Swatch Groups Colorants Yellow  : 100.000000
Swatch Groups Colorants Black   : 100.000000
Producer                        : Adobe PDF library 15.00
Slug Family                     : Kozuka Gothic Pro
Slug Version                    : 4.015
Slug Outline File Size          : 0
Slug Kerning Checksum           : 0
Slug Foundry                    : Adobe Systems
Slug Font Kind                  : OpenType - PS
Slug Checksum                   : 2472964034
Slug Post Script Name           : KozGoPro-Regular
Slug Font Sense 12 Checksum     : 2472964034
Page Count                      : 1
Creator                         : Adobe Illustrator CC 2015 (Macintosh)
EXIF Metadata provided by EXIF.tools
FCC ID Filing: EMOIBT68

Navigation menu