SDI Technologies IBT69N Bluetooth Rechargeable Speaker User Manual iBT69 EN IB TT 1129
SDI Technologies Inc. Bluetooth Rechargeable Speaker iBT69 EN IB TT 1129
Users Manual
Model: iBT69 (Front) IB (English)- Aux-in Size: 324Wmm x 184Hmm Color: Print in Black color Date: Nov 29, 2016 TopTeam CAUTION The battery used in this device may present a risk of fire, explosion or chemical burn if mistreated • Never use or charge the battery if it appears to be leaking, discolored, deformed, or in any way abnormal. • Never disassemble the unit or attempt to remove battery as that could cause leakage of alkaline solution or other electrolytic substance. • Always confirm that the temperature is 5°C – 35° C (41° - 95° Fahrenheit) before you charge the battery. Leakage or deterioration of the battery may occur if this warning is not heeded. • Never expose the battery to any liquid. • Never expose the battery to excessive heat such as direct sunlight or fire. Never use the battery pack in an unventilated vehicle where excessive internal temperatures may be encountered. • Always keep the battery out of the reach of infants and small children. 2. Maintenance 3. • • • Place the unit on a level surface away from sources of direct sunlight or excessive heat. Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth or other protective material should be placed between it and the furniture. Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents such as thinner or similar materials can damage the surface of the unit. Limited 1 Year Warranty Information iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original purchase. Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased. Should this fail to resolve the matter and service still be required by reason of any defect or malfunction during the warranty period, SDI will repair or, at its discretion, replace this product without charge. This decision is subject to verification of the defect or malfunction upon delivery of this product to the Factory Service Center authorized by Customer Service. A Consumer Guide to Product Safety When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. 1. 4. 5. 6. 7. 8. 9. 10. 11. If service is required, please call Customer Service at 1-800-288-2792 to obtain a Return Authorization Number and shipping instructions. A copy of the sales receipt is required to validate in-warranty coverage. 12. Disclaimer of Warranty 13. NOTE: This warranty is valid only if the product is used for the purpose for which it was designed. It does not cover (i) products which have been damaged by negligence or willful actions, misuse or accident, or which have been modified or repaired by unauthorized persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage to digital media players, CD’s or tape cassettes (if applicable); (iv) the cost of shipping this product to the Factory Service Center and its return to the owner. This warranty is valid only in the United States of America and does not extend to owners of the product other than to the original purchaser. In no event will SDI or any of its affiliates, contractors, resellers, their officers, directors, shareholders, members or agents be liable to you or any third party for any consequential or incidental damages, any lost profits, actual, exemplary or punitive damages. (Some states do not allow limitations on implied warranties or exclusion of consequential damages, so these restrictions may not apply to you.) This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Your acknowledgement and agreement to fully and completely abide by the above mentioned disclaimer of warranty is contractually binding to you upon your transfer of currency (money order, cashier's check, or credit card) for purchase of your SDI product. Water and Moisture – The unit should not be used near water. For example: near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement. Ventilation – The unit should be situated so that its location or position does not interfere with its proper ventilation. For example, it should not be situated on a bed, sofa, rug or similar surface that may block ventilation openings. Also, it should not be placed in a built-in installation, such as a bookcase or cabinet, which may impede the flow of air through the ventilation openings. Heat – The unit should be situated away from heat sources such as radiators, heat registers, stoves or other appliances (including amplifiers) that produce heat. Power Sources – The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. Power-Cable Protection – Power supply cables should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. It is always best to have a clear area from where the cable exits the unit to where it is plugged into an AC socket. Cleaning – The unit should be cleaned only as recommended. See the Maintenance section of this manual for cleaning instructions. Objects and Liquid Entry – Care should be taken so that objects do not fall and liquids are not spilled into any openings or vents located on the product. Attachments – Do not use attachments not recommended by the product manufacturer. Lightning and Power Surge Protection – Unplug the unit from the wall socket and disconnect the antenna or cable system during a lightning storm or when it is left unattended and unused for long periods of time. This will prevent damage to the product due to lightning and power-line surges. Overloading – Do not overload wall sockets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock. Damage Requiring ServiceÁ– The unit should be serviced by qualified service personnel when: A. the power supply cable or plug has been damaged. B. objects have fallen into or liquid has been spilled into the enclosure. C. the unit has been exposed to rain. D. the unit has been dropped or the enclosure damaged. E. the unit exhibits a marked change in performance or does not operate normally. Periods of Nonuse – If the unit is to be left unused for an extended period of time, such as a month or longer, the power cable should be unplugged from the unit to prevent damage or corrosion. Servicing – The user should not attempt to service the unit beyond those methods described in the user’s operating instructions. Service methods not covered in the operating instructions should be referred to qualified service personnel. Lithium-ion Battery Internal Rechargeable Lithium-ion Battery This device uses an internal rechargeable lithium-ion battery that should last the lifetime of the device. If you suspect your battery may be dead, try charging it several times. If the battery does not recharge, please contact us for repair information. WARNING/DISPOSAL OF UNIT Please do NOT attempt to change the battery yourself. If the battery has died and you do not want us to replace your battery, you should follow the disposal instructions below: • Never dispose of used batteries/electronics with ordinary solid wastes, since they contain toxic substances. • Always dispose of used batteries/electronics in accordance with the prevailing community regulations that apply to the disposal of batteries/electronics. If there are no local regulations concerning battery/electronics disposal, please dispose of the device in a waste bin for electronic devices. • Many electronics retailers now recycle batteries and other electronic components at no charge. Check to see which ones in your area do so. © 2016 SDI Technologies, Inc. All rights reserved CHARGE BEFORE USE Questions? Visit www.ihome.com FCC ID:EMOIBT69N IC:986B-IBT69N FCC Information FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. • Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. CAN ICES-3 (B)/NMB-3(B) • IC Statement This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil est conforme à la norme RSS d'Industrie Canada. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillageradioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance. Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la section 2.5 de RSS 102 et la conformité à l'exposition de RSS-102 rf, utilisateurs peut obtenir l'information canadienne sur l'exposition et la conformité de rf. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. Cet émetteur ne doit pas être Co-placé ou ne fonctionnant en même temps qu'aucune autre antenne ou émetteur. Cet équipement devrait être installé et actionné avec une distance minimum de 20 centimètres entre le radiateur et votre corps. Read before proceeding If you have any question regarding the operation or use of this product, please visit www.ihome.com to view answers to frequently asked questions. To learn more about this and other iHome products, please visit us online at www.ihome.com Printed in China Model: iBT69 (Back) IB (English)- Aux-in Size: 324Wmm x 184Hmm Color: Print in Black color Date: Aug 02, 2016 TopTeam to pair, then play Front of Speaker Back of Speaker LED Bluetooth Mode Using Bluetooth with the iBT63 Using Bluetooth with the iBT69 Aux-in Jack Bottom of Speaker Off/Play/Pair Switch Rubber Pad Note: Clean rubber pad on bottom of speaker with damp cloth for best performance USB Charging Jack Charging the iBT69 CHARGE BEFORE USE Note: When not in use, turn speaker OFF to save battery power Charging the iBT69 The iBT69 is powered by a rechargeable battery in the speaker. Make sure to charge the speaker before using. • Connect the micro-USB plug to the USB Charging jack on the speaker. • Connect the larger USB plug to a powered USB port, such as that on a computer. The light on the speaker will turn to solid red while charging and turn off when fully charged. When the light dims or if you start to notice sound distortion at higher volumes, it's time to recharge the batteries. to play • Slide the Off/Play/Pair Switch on the speaker to the PAIR position. Tones will sound and the light will flash blue and red to indicate pairing attempt. Using Bluetooth with the iBT69 • Place your audio device in Bluetooth mode (often found in the device’s Settings or Options menu) and make it “discoverable”. “iHome iBT69” should appear on your device. If “Not Connected” or similar message appears, select “iHome iBT69” to connect. If prompted for a password, enter “1234” on your device’s keypad. • Once paired, the light will glow solid blue and a confirmation beep will sound and you can then stream audio. If pairing is not successful, turn the power OFF on the speaker and repeat pairing procedure. • To listen to Bluetooth audio in the future, slide the Off/Play/Pair Switch on the speaker to the PLAY position. The light will flash blue as the speaker attempts to auto-link with the last previously linked unit in range (30 feet). • Control Bluetooth audio from your device. Remember to turn off the speaker and your device after listening. NOTE: When unit is charging, the blue light will appear solid red. Aux-in Mode Using the iBT69 with Aux Devices Computer connected to working outlet Connect audio cable (not included) Computer USB port (charging cable included) USB AC adaptor (not included) Mobile Phone PC/Tablet Game Devices iPod Laptop MP3/MP4 Charging cable USB AC adaptor connected to working outlet Nov 29, 2016 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause interference and (2) This device must accept any interference received, including interference that may cause undesired operation IMPORTANT Questions? Visit www.ihome.com or call 1-800-288-2792 Toll Free iBT69-161115-A(TT) Model: iBT69(USA) iBT69N(CANADA) Bluetooth Rechargeable Speaker • Slide the Off/Play/Pair Switch on the speaker to the PLAY (middle) position. The blue LED will flash, indicating auto-link mode. If unit is linked to a playing Bluetooth audio device, you will hear that device. • Connect a standard 3.5mm audio cable (not included) to the Aux-in Jack on the iBT69 and plug the other end into the headphone jack or line-out of any audio device. • Control audio from your aux device. • Slide the Off/Play/Pair Switch on the speaker to the “off” position when you are done listening. Remember to turn off your device, too. NOTE: Do not play a connected Aux device while a linked Bluetooth device is playing or you will hear both at once. Nov 29, 2016
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes XMP Toolkit : Adobe XMP Core 5.6-c111 79.158366, 2015/09/25-01:12:00 Format : application/pdf Creator Tool : Adobe Illustrator CC 2015 (Macintosh) Create Date : 2016:11:29 11:58:47+08:00 Modify Date : 2016:11:29 11:58:47+08:00 Metadata Date : 2016:11:29 11:58:47+08:00 Document ID : xmp.did:0f3c8ca8-70c7-4d15-a552-28c2cf98e8b7 Instance ID : uuid:03199c58-10b8-ed4d-a07f-ee5405cd2654 Original Document ID : uuid:62C45CDF36E7DE11B3EDE6C75058782A Rendition Class : proof:pdf Startup Profile : Print N Pages : 1 Has Visible Transparency : True Has Visible Overprint : True Producer : Adobe PDF library 15.00 Title : iBT69 EN IB (TT) 1129 Thumbnail Width : 256 Thumbnail Height : 224 Thumbnail Format : JPEG Thumbnail Image : (Binary data 19918 bytes, use -b option to extract) Derived From Instance ID : uuid:fce8bab7-2816-464d-b3c7-78dfa88907d0 Derived From Document ID : xmp.did:14909fb5-8461-4d03-bb69-b2b3c7ef51d0 Derived From Original Document ID: uuid:62C45CDF36E7DE11B3EDE6C75058782A Derived From Rendition Class : default History Action : saved, saved History Instance ID : xmp.iid:F87F1174072068118C14BA54CF54AC0F, xmp.iid:0f3c8ca8-70c7-4d15-a552-28c2cf98e8b7 History When : 2012:06:27 13:36:45-04:00, 2016:11:29 11:58:41+08:00 History Software Agent : Adobe Illustrator CS5, Adobe Illustrator CC 2015 (Macintosh) History Changed : /, / Max Page Size W : 397.933333 Max Page Size H : 503.061111 Max Page Size Unit : Millimeters Font Name : HelveticaNeue-HeavyItalic, HelveticaNeue-LightItalic, HelveticaNeue-Medium, HelveticaNeue-Light, ArialMT, Arial-BoldMT, Arial-Black, ArialNarrow, Helvetica-Light, Helvetica, Helvetica-Bold, MyriadPro-Regular, Futura-Light, MyriadPro-Black, HelveticaNeue-Heavy Font Family : Helvetica Neue, Helvetica Neue, Helvetica Neue, Helvetica Neue, Arial, Arial, Arial Black, Arial Narrow, Helvetica, Helvetica, Helvetica, Myriad Pro, Futura, Myriad Pro, Helvetica Neue Font Face : 86 Heavy Italic, 46 Light Italic, 65 Medium, 45 Light, Regular, Bold, Regular, Regular, Light, Regular, Bold, Regular, Light, Black, 85 Heavy Font Type : Type 1, Type 1, Type 1, Type 1, Open Type, Open Type, Open Type, Open Type, TrueType, TrueType, TrueType, Open Type, Type 1, Open Type, Type 1 Font Version : 001.100, 001.000, 001.000, 001.000, Version 5.01.2x, Version 5.01.2x, Version 5.00.1x, Version 2.38.1x, 10.0d4e1, 10.0d4e1, 10.0d4e1, Version 2.106;PS 2.000;hotconv 1.0.70;makeotf.lib2.5.58329, 001.000, OTF 1.006;PS 001.000;Core 1.0.23;hotunix 1.28, 001.000 Font Composite : False, False, False, False, False, False, False, False, False, False, False, False, False, False, False Font File Name : HelveNeuHeaIta; HelveticaNeue-HeavyItalic, HelveNeuLigIta; HelveticaNeue-LightItalic, HelveNeuMed; HelveticaNeue-Medium, HelveNeuLig; HelveticaNeue-Light, Arial.ttf, Arial Bold.ttf, Arial Black.ttf, Arial Narrow.ttf, Helvetica.dfont, Helvetica.dfont, Helvetica.dfont, MyriadPro-Regular.otf, FuturLig; Futura-Light, MyriadPro-Black.otf, HelveNeuHea; HelveticaNeue-Heavy Plate Names : Cyan, Magenta, Yellow, Black, 60% Grey.spot, 20% Grey.spot, 40% Grey.spot, 10% Grey.spot, 30% Grey.spot Swatch Groups Group Name : Default Swatch Group Swatch Groups Group Type : 0 Swatch Groups Colorants Gray : 12 Swatch Groups Colorants Swatch Name: 20% Grey.spot Swatch Groups Colorants Type : SPOT Swatch Groups Colorants Tint : 100.000000 Swatch Groups Colorants Mode : CMYK Swatch Groups Colorants Cyan : 0.000000 Swatch Groups Colorants Magenta : 0.000000 Swatch Groups Colorants Yellow : 0.000000 Swatch Groups Colorants Black : 20.000000 Slug Family : Arial Narrow Slug Version : 2.38.1 Slug Outline File Size : 0 Slug Kerning Checksum : 0 Slug Foundry : Monotype Typography Slug Font Kind : OpenType - TT Slug Checksum : 990397397 Slug Post Script Name : ArialNarrow Slug Font Sense 12 Checksum : 990397397 Page Count : 1 Creator : Adobe Illustrator CC 2015 (Macintosh)EXIF Metadata provided by EXIF.tools