SDI Technologies IBT751 Rechargeable Bluetooth Color Changing Speaker User Manual iBT751 QSG v5a
SDI Technologies Inc. Rechargeable Bluetooth Color Changing Speaker iBT751 QSG v5a
User Manual
iBT751 QSG (English)
Size: 420 x 160 mm (folded: 140 x 160 mm)
Material: 260gsm Art Card
Nov 28, 2017 FRONT
BACK
QUICK START GUIDE
In the Box » iBT751 speaker
» USB Charging cable
Rechargeable Bluetooth
Color Changing Speaker
Model: iBT751
iHome
iBT751
BLUETOOTH: PAIRING & PLAYING
Manual Pairing
Pairing the First Time
iHome
iBT751
2s
2s
2s
2s
CHARGE UNIT
FRONT BACK
BEFORE USE
ABOUT 5 HOURS
Action Button
Power
Button
Play/Pause
Button
Color Mode
Button
Rear Projection
Button
Contact Us: 1• 800• 288• 2792
For full warranty and full instructions
visit: www.ihome.com/support
USING SPEAKERPHONE
Answer Call End/Decline Call
FAST FADEEQ MODE SLOW FADE OFF
PULSE TO MUSIC
BREATHE MODE FAST BREATHE OFF
PULSE TO MUSIC
Color: print Black and PMS 7467C (2C + 1C) in white card
Voice Command/
Talk/End Button Bluetooth Button
When speaker is
ON and not
charging, press
Power Button to
hear battery level
announcement.
Aux-in
Jack
Charge via USB AC
adapter (not included)
or other powered
USB port
Lower/Raise
Volume Buttons USB in
Charging Port
» Make your Bluetooth device “discoverable”
» Press and hold the Power Button to turn on speaker. The first time the unit is powered on
it will enter auto-pairing mode.
» Select “iHome iBT751” on your device’s Bluetooth menu to complete pairing.
» To manually pair, power on speaker then press and hold Bluetooth Button for 2 seconds.
» Press Play/Pause Button to play or pause Bluetooth audio. Press x2 to skip to next track.
Press x3 to return to start of current track or go to previous track
» To reset Bluetooth, press and hold Bluetooth Button for 10 seconds.
» The speaker must be on and connected with a paired Bluetooth device to recieve calls.
» Press the Voice Command/Talk/End Button to answer incoming call. Press and hold to
end/decline call.
AUX-IN
» To play aux audio, connect a standard audio cable (not included) to the headphone jack
of your audio device and connect the other end to the aux-in jack on iBT751.
» Use controls on your device to listen to audio.
» Make sure Bluetooth audio is paused: you will not hear Aux audio while Bluetooth audio
is playing or a call is in progress.
COLOR CHANGING MODE
» Press and hold the Power Button to power on the iBT751.
» Press the Color Mode Button as needed to cycle through the above modes.
REAR PROJECTION MODE
» Press and hold the Power Button to power on the iBT751.
» Press the Rear Projection Button as needed to cycle through the above modes.
VOICE COMMAND MODE
» Press the Voice Command/Talk/End Button to cycle through the above modes.
» Press and hold the Voice Command/Talk/End Button for 2 seconds to access voice.
iHOME ENHANCE APP
» This unit is compatible with the iHome Enhance App. Download it from the Apple App
Store or from Google Play and link your device (select “iHome iBT751 app” on Bluetooth
menu after tapping Setup Device from the app’s menu). You can then make custom color
adjustments, set alarms and more.
» Press the Action Button to access functions programmed in the iHome Enhance app.
inside page inside page
FCC Information
FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
• Warning: Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
• NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the
equipment o and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAN ICES-3 (B)/NMB-3(B)
Canada Statement
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following
two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation
of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts
de licence. L’exploitation est autorisée aux deux conditions suivantes :
(1) l’appareil ne doit pas produire de brouillage;
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage
est susceptible d’en compromettre le fonctionnement.
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
le dispositif a été évalué à satisfaire l'exigence générale de l'exposition aux rf. l'appareil peut être utilisé
dans des conditions d'exposition portatif sans restriction.
Model: iBT751
FCC ID:EMOIBT751
IC:986B-IBT751
Printed in China
iBT751-171207-A
Internal Rechargeable Lithium-ion Battery
This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation. WARNING/DISPOSAL OF UNIT
Do NOT attempt to change the battery. Doing so will void the warranty and could cause
injury and damage to your device.
To dispose of the unit, follow the instructions below:
• Never dispose of used batteries/electronics with ordinary solid wastes, since they
contain toxic substances.
• Always dispose of used batteries/electronics in accordance with the prevailing
community regulations.
• Many electronics retailers now recycle batteries and other electronic components at no
charge.
GENERAL BATTERY PRECAUTIONS
• Never use or charge a battery if it appears to be leaking, discolored, deformed, or in any
way abnormal.
• Never disassemble the unit or attempt to remove battery as that could cause leakage of
alkaline solution or other electrolytic substances.
• Avoid charging a rechargeable battery when the temperature is not within 5°C - 35°C
(41° - 95° Fahrenheit).
• Never expose a battery to any liquid.
• Never expose a battery to excessive heat such as direct sunlight or fire. Never use a
battery pack in an unventilated vehicle where excessive internal temperatures may be
encountered.
• Always keep batteries out of the reach of infants and small children.
This device uses an internal non-replaceable rechargeable lithium-ion battery that should
last the lifetime of the device. If you suspect your battery may be dead, try charging it for
an extended period of time and try resetting the unit. If this fails, contact Customer
Service at 1-800-288-2792.
Contact Us: 1•800•288•2792
For full waranty and full instructions
visit: www.ihome.com/support
QUICK START GUIDE
Folded style
Dec 7, 2017
Dec 07, 2017