SDI Technologies IBT8080 Color Changing Rechargeable Bluetooth Wireless Stereo Speaker with Speakerphone User Manual iBT8080 EN IB 725

Download:
Mirror Download [FCC.gov]
Document ID	3120795
Application ID	xMFALd+yf7wGraFKvpPpgg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	46.24kB (578017 bits)
Date Submitted	2016-09-01 00:00:00
Date Available	2016-09-01 00:00:00
Creation Date	2016-07-25 12:07:08
Producing Software	Adobe PDF library 15.00
Document Lastmod	2016-07-25 17:14:52
Document Title	iBT8080(EN) IB 725
Document Creator	Adobe Illustrator CC 2015 (Macintosh)

iBT8080 EN-IB
Size: 214mm x 336mm
Printing color: Black
July 25, 2016
100gsm2 WF (書紙)
iBT8080 EN-IB Size: 214mm x 336mm
Printing color: Black
July 25, 2016
100gsm2 WF (書紙)
•
•
•
•
iBT8080
Troubleshooting
Unit doesn’t respond (no power)
Make sure unit is completely charged.
Check that all connections are correct and properly plugged in.
Make sure your device is properly paired with the iBT8080.
Make sure the unit is on.
Unit doesn’t respond (locked up/ “frozen”)
If the unit does not respond, try resetting the unit. Press and hold the
Bluetooth/Speakerphone Button
at the same time for about 10 seconds. Note that doing so will clear settings, and any Bluetooth devices
will need to be re-paired.
Model: iBT8080
What’s Included
Color Changing Rechargeable
Bluetooth Wireless Stereo
Speakers with Speakerphone
• iBT80 speaker x 2
• Combination micro USB to USB charging cable/audio in cable x 2
• Carry strap x 2
iBT8080-160725-A (EN)
iBT80
88
Printed in China
Consumer Product Safety Guide
IMPORTANT SAFETY INSTRUCTIONS
When used in the directed manner, this unit has been designed and manufactured to ensure
your personal safety. However, improper use can result in potential electrical shock or fire
hazards. Please read all safety and operating instructions carefully before installation and use,
and keep these instructions handy for future reference. Take special note of all warnings listed
in these instructions and on the unit.
1. Water and Moisture – DO NOT operate near sources of water or moisture such as in a
bathroom, near a sink, etc.
2. Ventilation – The unit should be situated so that its location or position does not interfere
with its proper ventilation. For example, it should not be situated on a bed, sofa, rug or
similar surface that may block ventilation openings.
3. Heat – The unit should be situated away from heat sources such as radiators, heat registers,
stoves or other appliances (including amplifiers) that produce heat.
4. Power Sources – The unit should be connected to a power supply only of the type described
in the operating instructions or as marked on the appliance.
5. Cleaning – The unit should be cleaned only using a warm damp cloth. Do not use solvents,
etc.
6. Objects and Liquid Entry – Care should be taken so that objects do not fall and liquids are
not spilled into any openings or vents located on the product.
7. Attachments – Do not use attachments not recommended by the product manufacturer.
8. Lightning and Power Surge Protection – Unplug the unit from the wall socket and disconnect
the antenna or cable system during a lightning storm or when it is left unattended and unused
for long periods of time. This will prevent damage to the product due to lightning and
power-line surges.
9. Overloading – Do not overload wall sockets, extension cords, or integral convenience
receptacles as this can result in a risk of fire or electric shock.
10.Damage Requiring Service – The unit should be serviced by qualified service personnel
when:
A. the power supply cable or plug has been damaged.
B. objects have fallen into or liquid has been spilled into the enclosure.
C.the unit has been exposed to rain.
D. the unit has been dropped or the enclosure damaged.
E. the unit exhibits a marked change in performance or does not operate normally.
12.Periods of Nonuse – If the unit is to be left unused for an extended period of time, such as
a month or longer, fully charge the unit before storing.
13.Servicing – The user should not attempt to service the unit beyond those methods described
in the user’s operating instructions. Service methods not covered in the operating instructions
should be referred to qualified service personnel.
iBT80
Combination
micro USB to USB cable/audio cable
FCC Radiation Exposure Statement
iBT8080
FCC ID: EMOIBT8080
IC: 986B-IBT8080
Top
Front
This device complies with Part 15 of the FCC Rules, operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
• Warning: Changes or modifications to this unit not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
• NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAN ICES-3 (B)/NMB-3(B)
Canada Statement
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the
following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired
operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio
exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :
(1) l’appareil ne doit pas produire de brouillage;
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage
est susceptible d’en compromettre le fonctionnement.
The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and
compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure
and compliance.
Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la section 2.5 de RSS
102 et la conformité à l'exposition de RSS-102 rf, utilisateurs peut obtenir l'information canadienne
sur l'exposition et la conformité de rf.
Microphone
Charging/Bluetooth
Status Indicator Light
Bottom
Back
Bluetooth/
Speakerphone
Button
Carry Strap Channel
(lantern mode)
Color Mode Button
(press and hold for
Battery Review)
CAUTION
The battery used in this device may present a risk of fire, explosion or chemical burn if
mistreated
• Never use or charge the battery if it appears to be leaking, discolored, deformed, or in any way abnormal.
• Never disassemble the unit or attempt to remove battery as that could cause leakage of alkaline solution or other
electrolytic substance.
• Always confirm that the temperature is 5°C – 35° C (41° - 95° Fahrenheit) before you charge the battery.
Leakage or deterioration of the battery may occur if this warning is not heeded.
• Never expose the battery to any liquid.
• Never expose the battery to excessive heat such as direct sunlight or fire. Never use the battery pack in an
unventilated vehicle where excessive internal temperatures may be encountered.
• Always keep the battery out of the reach of infants and small children.
Charging/
Aux-in
USB port
Lower/Raise
Volume Buttons
Power On/Off Switch
Manual Pairing
1. Slide the Power Off/On Switch on each speaker to ON. Wireless Stereo linking should take
about 10 seconds.
2. Press and hold the Bluetooth Button (located on the back) on the left speaker for 2 seconds.
3. Select “iHome iBT8080” on your device’s Bluetooth menu to complete pairing.
Getting Started: Carry Strap
Pairing with a Single iBT8080 Speaker (Mono Operation)
The iBT8080 has two channels to attach the included carry strap,
one on the bottom to hang the unit like a lantern, and one on the lower
back of the unit. To attach the carry strap, form a small loop in one end of the
carry strap. Insert this loop through the desired channel, then pull the
loop back through the larger loop formed in the carry strap to tighten.
To use a single speaker, just turn one on instead of both. To use both speakers separately, turn on and pair each
speaker separately with a different device. When separately paired speakers are returned to within Wireless
Stereo range, each will maintain separate pairing unless one is powered off then powered back on, in which case
it will attempt Wireless Stereo linking. Note: Each separately paired speaker will appear on your device as
“iHome iBT8080” (just as when you pair both speakers together). You can select the desired instance or remove
“iHome iBT8080” and re-pair unit(s) again.
OR
Playing Audio Via Bluetooth
Charging the Unit
CHARGE UNIT BEFORE USE/KEEP UNIT OFF FOR FASTER CHARGING
1. Connect the micro USB plug on the included combination cable to
the micro USB Charging/Aux-in USB Port on the side of the unit.
2. Connect the standard USB plug end of the cable to a power USB port on a computer, a USB AC
adaptor or other USB charging device. For first time use, charge unit for about 4 hours. The status
indicator LED on top of the unit turns solid red while charging and turns off once unit is fully charged.
Charge via computer USB port, USB AC adaptor or other powered USB port
iHome iBT8080 USB port
iHome iBT8080 USB port
Computer
connected to
working outlet
USB AC adaptor
(not included)
1. Slide the Power Off/On Switch on BOTH speakers to ON within 10 seconds. Following Wireless Stereo
linking,the Bluetooth status indicator will glow solid blue when a linked device is in range and detected. You
can then listen to audio streamed wirelessly from your paired Bluetooth device.
2. Use controls on your Bluetooth device to adjust volume and to play, pause and navigate tracks.
3. Press the – or + Button to adjust the iBT8080 volume. You can also adjust volume on your device.
4. When done listening, slide the Power Off/On Switch to OFF on both speakers.
Speakerphone Operation
NOTE: In Wireless Stereo mode, speakerphone function is only on the LEFT speaker. Speaker must be powered on
and linked to a Bluetooth phone to receive a call.
1. When a call is received, playing music is muted to hear the ring tone and the left cabinet flashes green. Press
the
Bluetooth/Speakerphone Button to answer the call.
2. When a call is completed, press the
function.
Thank you for purchasing the iHome iBT8080. This product is designed to provide high quality wireless
sound for your iPad, iPhone, iPod, computer, PDA or other Bluetooth audio device.
This instruction booklet explains the basic operation and care of the unit. Please read them carefully and
keep for future reference.
Maintenance
• Place the unit on a level surface away from sources of direct sunlight or excessive heat.
• Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth or other
protective material should be placed between it and the furniture.
• Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents,
such as benzene, thinner or similar materials can damage the surface of the unit.
3. To review the charging status of the unit while it is charging, press and hold the
Color Mode
Button. The cabinet lights will flash green from bottom to top for 12 seconds to show unit is charging.
Reviewing Battery Charge Level (Charger is Disconnected and unit is ON)
1. Press and hold the
Color Mode Button when unit is ON
but not charging (micro USB cable not connected) to enter
Battery Review Mode. The cabinet lights will blink and
built-in voice will announce the current battery level.
RED
Very Low
TIP: On some iOS (Apple) devices,
you can view the iBT8080 battery
status on your deviceʼs screen.
When device is paired and
connected, look for a vertical
battery icon next to
the Bluetooth icon on
the upper right corner
of the deviceʼs screen.
GREEN
Low
Good
Bluetooth/Speakerphone Button to end the call and resume previous
USB AC adaptor
connected to working outlet
Introduction
iBT8080
iHome
Carry Strap Channel
WARNING/DISPOSAL OF UNIT
Please do NOT attempt to change the battery yourself. Doing so may damage the unit and will void the warranty.
When disposing of unit, follow the disposal instructions below:
• Never dispose of used batteries/electronics with ordinary solid wastes, since they contain toxic substances.
• Always dispose of used batteries/electronics in accordance with the prevailing community regulations that apply
to the disposal of batteries/electronics. If there are no local regulations concerning battery/electronics disposal,
please dispose of the device in a waste bin for electronic devices.
• Many electronics retailers now recycle batteries and other electronic components at no charge. Check to see
which ones in your area do so.
Using the
Pairing Your Device
Pairing is the set-up process to introduce your Bluetooth-capable device to the iBT8080. Once your device is paired,
the iBT8080 can recognize it and you can play your audio through it.
1. Turn on your Bluetooth device and make it “discoverable” by turning on Bluetooth mode (check
in Options or Settings).
2. Slide the Power On/Off Switch to ON to turn on the iBT8080. The first time the unit is
powered on, it will enter auto-pairing mode: the unit will beep and the Bluetooth status
indicator light on top of the unit will flash quickly while the unit attempts to pair. (If Color Mode
is on, the cabinet lights will flash blue and red.) “iHome iBT8080” should appear in your
device’s Bluetooth menu. Select “iHome iBT8080” on device to begin/complete pairing. If
prompted for a passcode, enter “1234” on your device’s keypad. 1 beep will sound and the
Bluetooth status indicator light will appear solid blue (in Color Mode, cabinet will flash blue
twice), indicating the iBT8080 paired and ready to play music. There should also be an
indication on your device. If no device is successfully paired within 3 minutes the iBT8080 will
default to previous mode.
3. To pair with a different device or at a different time, make sure unit is powered on, then press
and hold the Bluetooth/Speakerphone Button for 2 seconds. Select “iHome iBT8080” on
device to pair.
Once the iBT8080 is paired to a device, it will attempt to autolink when the device is within
range (about 33 feet).
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment.
Computer USB port
This device uses an internal rechargeable lithium-ion battery that should last the lifetime of the device. If you
suspect your battery may be dead, try charging it several times. If the battery does not recharge, please contact
Customer Service at -1-800-288-2792.
iBT8080
Meet Your iBT8080
Questions? Visit www.ihome.com
or call 1-800-288-2792 Toll Free
Internal Rechargeable Lithium-ion Battery
Carry strap
If Wireless Stereo link fails or does not work, make sure both speakers are
Right Speaker
powered on within 10 seconds. If problem remains, turn both speakers off
and reset the Wireless Stereo sync. Please follow the steps below to
reconnect both speakers:
1 Power On one speaker (Slide Power On/Off Switch to ON). The green cabinet LED will flash.
2 Within 10 seconds, press and hold the Bluetooth Button and Volume "-" Button at the same time
for 3 seconds. Keep speaker powered on.
3 Repeat above steps with the other speaker and wait for them to reconnect.
Note: If step 2 is not completed within 10 seconds, please power Off the speaker and repeat.
instruction manual
FCC Information
iBT8080
Wireless Stereo is not working
CHARGE
BEFORE
USE
LImited 1 Year Warranty
Please visit www.ihome.com for warranty terms
© 2016 SDI Technologies, Inc. All rights reserved
Questions? Visit www.ihome.com
or call 1-800-288-2792 Toll Free
Using the
Wireless Stereo
Each of your iBT8080 speakers are pre-synced to one another for Wireless Stereo operation. This sync is permanent
(neither speaker can be synced with a different or third speaker).
Power ON both speakers
Slide the Power Off/On Switch located on the bottom of each speaker to ON to
within 10 seconds for
Wireless Stereo
turn it on and start Wireless Stereo link. Tones will sound and each speaker will
flash green while attempting to establish a link. The indicator on the top of each
speaker will glow green when the Wireless Stereo link is successful and an audio
prompt will identify each speaker as left channel or right channel. After successful
Wireless Stereo linking, the speakers will enter Bluetooth pairing mode (see below).
After first time power on, user must pair manually (see page 6).
Left Speaker
NOTE: Once speakers are linked, powering OFF one speaker will also turn
the other speaker off. To turn that speaker back on, move the Power Off/On
Switch to OFF then back to ON.
Trouble pairing device with iBT8080
Bluetooth implementation varies depending on your device’s hardware and operating system. Please see
our website for updates on pairing.
• When you power ON the speaker, it will automatically link with the last previously paired Bluetooth
device if the device is still within range (about 33 feet). To pair with a different device you must turn off
Bluetooth capability on the already paired device, or take it out of range.
• If your device does not auto-link when within range, re-pair the device. To do so, first delete the
iBT8080 from your Bluetooth devices menu.
• Make sure your device is working properly. Check your device’s manual for details on Bluetooth pairing
and linking.
Getting Started: First Time Use
High
Playing Audio via Aux In
1. Connect micro USB charging/audio cable to the Charging/Aux-in USB Port
on the side of the unit and connect the 3.5mm audio plug end to the
headphone or line-out jack on your audio device.
2. Slide the Power On/Off Switch to ON turn the unit ON.
3. Power on the audio device and use the controls on the device to play or pause
audio and to navigate tracks.
4. Press the – or + Button to adjust the system volume. You can also adjust
volume on your device.
5. When done listening, slide the Power On/Off Switch to OFF turn the unit OFF.
Remember to turn off your device, too.
Mobile Phone PC/Tablet Game Devices iPod
Laptop MP3/MP4
Using Color Modes
There are six color modes, which you cycle through in this order:
a. Slow Fade (colors slowly fade from one into the next b. Fast Change (colors change rapidly)
c. One Color (select a favorite color)
d. Pulse to Music (lights flash to the beat of the music)
e. Preset Pulsing (each light array pulses through its own preset pattern of colors)
f. Off (no display)
1. Slide the Power On/Off Switch to ON turn the unit ON.
2. Press the
Color Mode Button repeatedly to cycle to the desired color mode. For One Color mode, first cycle
to Fast Change mode and press the Color Mode Button when the desired color appears. For Pulse to Music,
make sure the volume on your connected Bluetooth device is above 30%.
3. When done, slide the Power On/Off Switch to OFF turn the unit OFF.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.6-c111 79.158366, 2015/09/25-01:12:00
Format                          : application/pdf
Metadata Date                   : 2016:07:25 17:14:52+08:00
Modify Date                     : 2016:07:25 17:14:52+08:00
Create Date                     : 2016:07:25 12:07:08+08:00
Creator Tool                    : Adobe Illustrator CC 2015 (Macintosh)
Instance ID                     : uuid:2c44dcad-f3c3-2e49-8e14-4db9fa6e9b2d
Document ID                     : xmp.did:b13440be-dbe4-4826-bfa2-f3e65f251ab4
Original Document ID            : uuid:5B20892493BFDB11914A8590D31508C8
Rendition Class                 : proof:pdf
Startup Profile                 : Basic CMYK
Has Visible Overprint           : True
Has Visible Transparency        : True
N Pages                         : 1
Producer                        : Adobe PDF library 15.00
Title                           : iBT8080(EN) IB 725
Thumbnail Width                 : 256
Thumbnail Height                : 192
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 24407 bytes, use -b option to extract)
Derived From Instance ID        : uuid:c74c2d48-8f57-4640-ad78-e8282a4cf92d
Derived From Document ID        : xmp.did:7878614d-a6d3-4fa3-aa99-0f1869b3bdf4
Derived From Original Document ID: uuid:5B20892493BFDB11914A8590D31508C8
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved
History Instance ID             : xmp.iid:FD7F1174072068118083A0F3A15A5CAC, xmp.iid:b13440be-dbe4-4826-bfa2-f3e65f251ab4
History When                    : 2010:10:12 11:33:38+08:00, 2016:07:25 12:07:02+08:00
History Software Agent          : Adobe Illustrator CS5, Adobe Illustrator CC 2015 (Macintosh)
History Changed                 : /, /
Max Page Size W                 : 514.350000
Max Page Size H                 : 384.852349
Max Page Size Unit              : Millimeters
Font Name                       : Futura-LightOblique, Futura-BookOblique, Futura, Futura-Bold, Gotham-Medium, Futura-Book, Futura-Light, ArialMT, ArialNarrow, Futura-Medium, MyriadPro-Regular, MyriadPro-Bold, KozGoPro-Regular, Gotham-BoldItalic, HelveticaNeue-HeavyItalic
Font Family                     : Futura, Futura, Futura, Futura, Gotham, Futura, Futura, Arial, Arial Narrow, Futura, Myriad Pro, Myriad Pro, 小塚ゴシック Pro, Gotham, Helvetica Neue
Font Face                       : Light Oblique, Book Oblique, Medium, Bold, Medium, Book, Light, Regular, Regular, Medium, Regular, Bold, R, Bold Italic, 86 Heavy Italic
Font Type                       : Type 1, Type 1, Type 1, Type 1, Open Type, Type 1, Type 1, Open Type, Open Type, TrueType, Open Type, Open Type, Open Type, Open Type, Type 1
Font Version                    : 001.002, 001.002, 001.000, 001.003, Version 2.201 Pro, 001.002, 001.002, Version 5.01.2x, Version 2.38.1x, 10.0d3e2, Version 2.106;PS 2.000;hotconv 1.0.70;makeotf.lib2.5.58329, Version 2.115;PS 2.000;hotconv 1.0.81;makeotf.lib2.5.63406, Version 4.015;PS 4.004;hotconv 1.0.70;makeotf.lib2.5.58329, Version 2.201 Pro, 001.100
Font Composite                  : False, False, False, False, False, False, False, False, False, False, False, False, False, False, False
Font File Name                  : FuturLigObl; Futura-LightOblique, FuturBooObl; Futura-BookOblique, Futur; Futura, FuturBol; Futura-Bold, Gotham-Medium.otf, FuturBoo; Futura-Book, FuturLig; Futura-Light, Arial.ttf, Arial Narrow.ttf, Futura.ttc, MyriadPro-Regular.otf, .6846.otf, KozGoPro-Regular.otf, Gotham-BoldItalic.otf, HelveNeuHeaIta; HelveticaNeue-HeavyItalic
Plate Names                     : Cyan, Magenta, Yellow, Black, 40% Grey.spot, 20% Grey.spot, 10% Grey.spot, 60% Grey.spot, 30% Grey.spot
Swatch Groups Group Name        : Default Swatch Group
Swatch Groups Group Type        : 0
Swatch Groups Colorants Swatch Name: 60% Grey.spot
Swatch Groups Colorants Type    : SPOT
Swatch Groups Colorants Tint    : 100.000000
Swatch Groups Colorants Mode    : RGB
Swatch Groups Colorants Red     : 135
Swatch Groups Colorants Green   : 135
Swatch Groups Colorants Blue    : 134
Slug Family                     : Kozuka Gothic Pro
Slug Version                    : 4.015
Slug Outline File Size          : 0
Slug Kerning Checksum           : 0
Slug Foundry                    : Adobe Systems
Slug Font Kind                  : OpenType - PS
Slug Checksum                   : 2472964034
Slug Post Script Name           : KozGoPro-Regular
Slug Font Sense 12 Checksum     : 2472964034
Page Count                      : 1
Creator                         : Adobe Illustrator CC 2015 (Macintosh)

EXIF Metadata provided by EXIF.tools