SDI Technologies IBT82 Bluetooth Speaker User Manual iBT82 IB 12102015 v3

Download:
Mirror Download [FCC.gov]
Document ID	2865240
Application ID	uOt7TsLzvUGc3QE5t20+fQ==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	141.19kB (1764853 bits)
Date Submitted	2016-01-07 00:00:00
Date Available	2016-01-07 00:00:00
Creation Date	2016-01-04 17:32:10
Producing Software	Adobe PDF library 15.00
Document Lastmod	2016-01-07 08:08:04
Document Title	iBT82 IB_12102015_v3
Document Creator	Adobe Illustrator CC 2015 (Macintosh)

iBT82 EN-IB Size: 214mm x 336mm
Printing color: Black
Dec 11, 2015
100gsm2 WF (書紙)
Limited 1 Year Warranty
iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects
in workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original
purchase. Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally
purchased. Should this fail to resolve the matter and service still be required by reason of any defect or malfunction during
the warranty period, SDI will repair or, at its discretion, replace this product without charge. This decision is subject to
verification of the defect or malfunction upon delivery of this product to the Factory Service Center authorized by Customer
Service.
If service is required, please call Customer Service at 1-800-288-2792 to obtain a Return Authorization Number and shipping
instructions.
Disclaimer of Warranty
NOTE: This warranty is valid only if the product is used for the purpose for which it was designed. It does not cover (i) products
which have been damaged by negligence or willful actions, misuse or accident, or which have been modified or repaired
by unauthorized persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage to digital media
players, CD’s or tape cassettes (if applicable); (iv) the cost of shipping this product to the Factory Service Center and its return
to the owner.
This warranty is valid only in the United States of America and does not extend to owners of the product other than to the
original purchaser. In no event will SDI or any of its affiliates, contractors, resellers, their officers, directors, shareholders,
members or agents be liable to you or any third party for any consequential or incidental damages, any lost profits, actual,
exemplary or punitive damages. (Some states do not allow limitations on implied warranties or exclusion of consequential
damages, so these restrictions may not apply to you.) This warranty gives you specific legal rights, and you may also have
other rights which vary from state to state.
Your acknowledgment and agreement to fully and completely abide by the above mentioned disclaimer of warranty is
contractually binding to you upon your transfer of currency (money order, cashier's check, or credit card) for purchase of your
SDI product.
Model: iBT82
Waterproof
Rechargeable Bluetooth
Speaker with Speakerphone
Consumer Product Safety Guide
IMPORTANT SAFETY INSTRUCTIONS
When used in the directed manner, this unit has been designed and manufactured to ensure
your personal safety. However, improper use can result in potential electrical shock or fire
hazards. Please read all safety and operating instructions carefully before installation and use,
and keep these instructions handy for future reference. Take special note of all warnings listed
in these instructions and on the unit.
1. Water and Moisture – DO NOT immerse unit in water. Make sure the seal and surrounding
surfaces are completely dry before opening seal to prevent moisture from damaging the
internal electronics. Keep seal free of dirt, sand, or other objects that can interfere with proper
sealing. If for any reason the seal is not making a tight seal, water may enter the unit.
2. Ventilation – The unit should be situated so that its location or position does not interfere
with its proper ventilation. For example, it should not be situated on a bed, sofa, rug or
similar surface that may block ventilation openings.
3. Heat – The unit should be situated away from heat sources such as radiators, heat registers,
stoves or other appliances (including amplifiers) that produce heat.
4. Power Sources – The unit should be connected to a power supply only of the type described
in the operating instructions or as marked on the appliance.
5. Cleaning – The unit should be cleaned only using a warm damp cloth. Do not use solvents,
etc.
6. Objects and Liquid Entry – Care should be taken so that objects do not fall and liquids are
not spilled into any openings or vents located on the product.
7. Attachments – Do not use attachments not recommended by the product manufacturer.
8. Lightning and Power Surge Protection – Unplug the unit from the wall socket and disconnect
the antenna or cable system during a lightning storm or when it is left unattended and unused
for long periods of time. This will prevent damage to the product due to lightning and
power-line surges.
9. Overloading – Do not overload wall sockets, extension cords, or integral convenience
receptacles as this can result in a risk of fire or electric shock.
10.Damage Requiring Service – The unit should be serviced by qualified service personnel
when:
A. the power supply cable or plug has been damaged.
B. objects have fallen into or liquid has been spilled into the enclosure.
C.the unit has been exposed to rain.
D. the unit has been dropped or the enclosure damaged.
E. the unit exhibits a marked change in performance or does not operate normally.
12.Periods of Nonuse – If the unit is to be left unused for an extended period of time, such as
a month or longer, fully charge the unit before storing.
13.Servicing – The user should not attempt to service the unit beyond those methods described
in the user’s operating instructions. Service methods not covered in the operating instructions
should be referred to qualified service personnel.
Questions? Visit www.ihome.com
or call 1-800-288-2792 Toll Free
• carry strap
4. “iHome iBT82” should appear in your device’s Bluetooth menu. If “Not Paired”, “Not Connected” or similar
message appears, select “iHome iBT82” to connect it. If prompted for a passcode, enter “1234” on your
device’s keypad.
CHARGE
BEFORE
USE
For iPhone
Internal Rechargeable Lithium-ion Battery
This device uses an internal rechargeable lithium-ion battery that should last the lifetime of the device. If you
suspect your battery may be dead, try charging it several times. If the battery does not recharge, please contact
us for repair information.
WARNING/DISPOSAL OF UNIT
Please do NOT attempt to change the battery yourself. If the battery has died and you do not want us to replace
your battery, you should follow the disposal instructions below:
• Never dispose of used batteries/electronics with ordinary solid wastes, since they contain toxic substances.
• Always dispose of used batteries/electronics in accordance with the prevailing community regulations that apply
to the disposal of batteries/electronics. If there are no local regulations concerning battery/electronics disposal,
please dispose of the device in a waste bin for electronic devices.
• Many electronics retailers now recycle batteries and other electronic components at no charge. Check to see
which ones in your area do so.
CAUTION
The battery used in this device may present a risk of fire, explosion or chemical burn if
mistreated
• Never use or charge the battery if it appears to be leaking, discolored, deformed, or in any way abnormal.
• Never disassemble the unit or attempt to remove battery as that could cause leakage of alkaline solution or other
electrolytic substance.
• Always confirm that the temperature is 5°C – 35° C (41° - 95° Fahrenheit) before you charge the battery.
Leakage or deterioration of the battery may occur if this warning is not heeded.
• Never expose the battery to any liquid.
• Never expose the battery to excessive heat such as direct sunlight or fire. Never use the battery pack in an
unventilated vehicle where excessive internal temperatures may be encountered.
• Always keep the battery out of the reach of infants and small children.
micro USB charging cable
instruction manual
iBT82
FCC Radiation Exposure Statement
FCC ID: EMO-IBT82
IC: 986B-IBT82
Power Button
iBT82
Upper Right Side
+ Volume Button
Bluetooth Pairing Button
• Warning: Changes or modifications to this unit not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
• NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAN ICES-3 (B)/NMB-3(B)
IC Statement
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference that
may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
RSS-247. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas
produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and
compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure
and compliance.
Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la section 2.5 de RSS
102 et la conformité à l'exposition de RSS-102 rf, utilisateurs peut obtenir l'information canadienne
sur l'exposition et la conformité de rf.
Lower Left Side
For proper waterproof operation, make sure the waterproof cover on the left side of the unit
is completely flush with the unit by pressing along the entire edge of the cover until it is
completely and securely in place.
•
•
•
The unit is IP67 waterproof rated, meaning it is immersible for up to 30 minutes at a depth
of 1 meter (3 feet). It will typically withstand rain, snow and being submersed in shallow
water. Longer duration or deeper immersion that exceeds the tested limits may cause
product failure and void the warranty.
DO NOT immerse the unit in water for extended periods.
DO NOT immerse the unit in water deeper than 1 meter (about 3 feet).
Make sure cover and surrounding surfaces are completely dry before opening cover to
prevent moisture from damaging the internal electronics.
Keep rubber cover free of dirt, sand, or other objects that can interfere with proper
sealing. If for any reason the waterproof cover is not making a tight waterproof seal water
may enter the unit.
Rinse with tap water after immersion in salt water or swimming pool.
DO NOT clean unit with oily soaps or use chemicals or solvents. Clean with damp cloth.
– Volume Button
Lower Right Side
Play/Pause Button
USB Charging
Port
Speakerphone Button
Using the
Pairing with a Different Device
iBT82
When you power ON the speaker, it will automatically link with the previously paired Bluetooth device
if that device is still within range (about 30 feet). To pair with a different device follow steps 1 - 4 under
”Pairing Your Device” on previous page.
1. Press and hold the
Power Button for 2 seconds to turn on the unit. The status indicator will glow solid
blue when a linked device is in range and detected. You can then listen to audio streamed wirelessly
from your paired Bluetooth device.
2. Press the
Play/Pause Button to play audio from your device. Press again to pause play and once
more to resume play. When Bluetooth audio is active, the status indicator will glow solid blue.
3. Use menu and track controls on your Bluetooth device to navigate tracks.
4. Press the – or + Button to adjust the iBT82 volume. The LED will flash 3X when minimum or maximum
volume is reached. You can also adjust volume on your device.
5. When done listening, press the Power Button to turn the unit OFF. Remember to turn off your device,
too.
Speakerphone Operation
Reset Button
(insert paperclip to
reset unit)
NOTE: The unit must be powered and linked to a Bluetooth phone to receive a call.
1. When a call is received, playing music is muted to hear the ring tone. Press the
Speakerphone
Button to answer the call, or press and hold it to ignore the call. Press the
Speakerphone Button
to switch between incoming calls.
2. When a call is completed, press and hold the
Speakerphone Button to end the call and resume
previous function.
Waterproof Cover
Status indicator LED
Top
iBT82
Troubleshooting
Unit doesn’t respond (no power)
• Check that unit is fully charged.
• Make sure your device is properly paired with the iBT82.
• Make sure the Power is ON.
TIP: On some iOS (Apple) devices,
you can view the iBT82 battery
status on your deviceʼs screen.
When device is paired and
connected, look for a vertical
battery icon next to
the Bluetooth icon on
the upper right corner
of the deviceʼs screen.
Unit doesn’t respond (locked up or frozen)
If the unit does not respond, insert the end of a paperclip or similar into the Reset Button located under
the waterproof cover to reset the unit.
Microphone
Status indicator
Status
Solid red LED
Unit is charging
Unit needs charging
Flashing red LED
Trouble pairing device/computer with iBT82
Bluetooth implementation varies depending on your device’s hardware and operating system. Please see
our website for updates on pairing.
• Make sure you have the latest firmware for your device.
• Make sure your device is working properly. Check your device’s manual for details on Bluetooth
pairing and linking.
• When you power ON the speaker, it will automatically link with the last previously paired Bluetooth
device if the device is still within range (approx.30 feet). To pair with a different device press and hold
the
Bluetooth Pairing Button for 2-3 seconds.
Solid blue LED
Active Bluetooth connection
Quickly flashing blue LED
Unit is attempting to pair with Bluetooth device
Slowly flashing blue LED
Unit is attempting to auto link to already
paired Bluetooth device
For further information and to see the latest instructions, visit www.ihome.com/support
Introduction
IMPORTANT INFORMATION ABOUT WATERPROOF OPERATION
iHome iBT82
iHome iBT82
Playing Audio Via Bluetooth
Declaration ID D025615
Thank you for purchasing the iHome iBT82. This product is designed to provide high quality wireless
sound for your Bluetooth audio device. Is shockproof, waterproof and dustproof, and should provide long
life even in tough condtions.
This instruction booklet explains the basic operation and care of the unit. Please read them carefully and
keep for future reference.
For other
Upper Left Side
This device complies with Part 15 of the FCC Rules, operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
•
•
•
iHome iBT82
5. Once pairing is successful, a tone will sound and the Bluetooth indicator light will glow solid blue, indicating
the iBT82 is ready to play music. There should also be an indication on your device. If no device is successfully
paired within 3 minutes the iBT82 will default to previous mode. Once the iBT82 is paired to a device, it will
attempt to autolink when the device is within range (about 30 feet).
carry strap
Meet Your iBT82
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment.
This Device complies with RSS-247 of the IC Rules; Operation is subject to the following two
conditions:
(1) This device may not cause interference and
(2) This device must accept any interference received, including interference that may cause
undesired operation
•
iHome iBT82
FCC Information
1. Make sure your Bluetooth device is fully charged. Turn on your Bluetooth device and make it
“discoverable” by turning on Bluetooth mode (check in Options or Settings).
2. Press and hold the
Power Button for 2 seconds to turn on the iBT82. The first time the unit is
powered on, it will enter auto-pairing mode and attempt to connect to a Bluetooth device.
Otherwise, follow step 3 to begin pairing.
3. Press and hold the Bluetooth Pairing Button for 2 seconds. The unit will beep twice and the
status indicator LED will flash blue, indicating the unit is in pairing mode.
• micro USB charging cable
iBT82 speaker
Printed in China
iBT82
Pairing is the set-up process to introduce your Bluetooth-capable device to the iBT82. Once your device is paired,
the iBT82 can recognize it and you can play your audio through it.
• iBT82 speaker
© 2015 SDI Technologies, Inc. All rights reserved
Questions? Visit www.ihome.com
or call 1-800-288-2792 Toll Free
iBT82-120715-A (EN)
Using the
Pairing Your Device
What’s Included
Using the
Getting Started: Carry Strap
iBT82
The iBT82 comes with a carry strap for easy carrying or attaching to a
backpack, shower head, etc.
To attach the carry strap, form a small loop in one end of the strap. Insert this
loop through the channel on top of the unit, then pull the loop back through
the larger loop formed in the carry strap to tighten.
Getting Started: Charging the Unit
Charge unit before use. For first time charge, charge for at least 4 hours.
Pull back waterproof seal and connect the included micro USB cable to the
USB Charging Port on the left side of the unit and connect the other standard
USB plug to a computer, USB AC adaptor (not included) or other USB power
source. The status indicator glows solid red while charging and turns off once
charged.
USB AC adaptor
(not included)
Computer
connected to
working outlet
Computer USB port
OR
USB AC adaptor
connected to
working outlet

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Format                          : application/pdf
Title                           : iBT82 IB_12102015_v3
Metadata Date                   : 2016:01:07 08:08:04+08:00
Modify Date                     : 2016:01:07 08:08:04+08:00
Create Date                     : 2016:01:04 17:32:10+08:00
Creator Tool                    : Adobe Illustrator CC 2015 (Macintosh)
Thumbnail Width                 : 256
Thumbnail Height                : 180
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 22134 bytes, use -b option to extract)
Instance ID                     : uuid:205bab3d-a3e5-4bb7-9ac3-56d6912b3192
Document ID                     : xmp.did:afcd32cc-9ca3-4edd-9462-9fe24ad91726
Original Document ID            : uuid:5B20892493BFDB11914A8590D31508C8
Rendition Class                 : proof:pdf
Derived From Instance ID        : uuid:7b60c262-f6a8-854a-a9d8-ae8c818963d0
Derived From Document ID        : xmp.did:d1d19440-d594-4a4b-a037-8e34dfcbe22d
Derived From Original Document ID: uuid:5B20892493BFDB11914A8590D31508C8
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved
History Instance ID             : xmp.iid:FD7F1174072068118083A0F3A15A5CAC, xmp.iid:afcd32cc-9ca3-4edd-9462-9fe24ad91726
History When                    : 2010:10:12 11:33:38+08:00, 2016:01:04 17:31:52+08:00
History Software Agent          : Adobe Illustrator CS5, Adobe Illustrator CC 2015 (Macintosh)
History Changed                 : /, /
Manifest Link Form              : EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference
Manifest Reference File Path    : /Users/charlielaw/Desktop/Artwork/iBT82/iBT82BL-REN-V1.png, /Users/deonleung/Desktop/Pairing screen images/iPhone-connected.psd, /Users/deonleung/Desktop/Pairing screen images/iPhone-not_paired.psd, /Users/deonleung/Desktop/Pairing screen images/other_connect.psd, /Users/deonleung/Desktop/Pairing screen images/other-not_pair.psd, /Volumes/SDI/SDI_Misc/iHome/Quick Start Guide Workgroup/Images/NFC Phone images/NFC setting.png
Ingredients File Path           : /Users/charlielaw/Desktop/Artwork/iBT82/iBT82BL-REN-V1.png, /Users/deonleung/Desktop/Pairing screen images/iPhone-connected.psd, /Users/deonleung/Desktop/Pairing screen images/iPhone-not_paired.psd, /Users/deonleung/Desktop/Pairing screen images/other_connect.psd, /Users/deonleung/Desktop/Pairing screen images/other-not_pair.psd, /Volumes/SDI/SDI_Misc/iHome/Quick Start Guide Workgroup/Images/NFC Phone images/NFC setting.png
Startup Profile                 : Basic CMYK
Has Visible Overprint           : True
Has Visible Transparency        : True
N Pages                         : 1
Max Page Size W                 : 514.350000
Max Page Size H                 : 384.851981
Max Page Size Unit              : Millimeters
Font Name                       : ArialMT, Futura-Light, Futura-LightOblique, Futura-Book, Futura, Futura-Bold, Futura-ExtraBold, Futura-Medium, Helvetica, HelveticaNeue-HeavyItalic, MyriadPro-Regular, MyriadPro-Bold, KozGoPro-Regular
Font Family                     : Arial, Futura, Futura, Futura, Futura, Futura, Futura, Futura, Helvetica, Helvetica Neue, Myriad Pro, Myriad Pro, KozGoPro Regular-83pv-RKSJ-H
Font Face                       : Regular, Light, Light Oblique, Book, Medium, Bold, Extra Bold, Medium, Regular, 86 Heavy Italic, Regular, Bold, Regular-83pv-RKSJ-H
Font Type                       : Open Type, Open Type, Type 1, Open Type, Type 1, Open Type, Type 1, TrueType, TrueType, Type 1, Open Type, Open Type, Unknown
Font Version                    : Version 5.06, OTF 1.0;PS 001.002;Core 1.0.22, 001.002, OTF 1.0;PS 001.002;Core 1.0.22, 001.000, OTF 1.0;PS 001.003;Core 1.0.22, 001.000, 6.2d2e1, 8.0d3e1, 001.100, Version 2.106;PS 2.000;hotconv 1.0.70;makeotf.lib2.5.58329, Version 2.106;PS 2.000;hotconv 1.0.70;makeotf.lib2.5.58329, Version 6.020;PS 6.008;hotconv 1.0.70;makeotf.lib2.5.5900
Font Composite                  : False, False, False, False, False, False, False, False, False, False, False, False, False
Font File Name                  : Arial.ttf, Futura-Light.otf, FuturLigObl; Futura, Futura-Book.otf, Futur; Futura, Futura-Bold.otf, FuturExtBol; Futura, Futura.ttc, Helvetica.dfont, HelveNeuHeaIta; Helvetica Neue SFAD, MyriadPro-Regular.otf, MyriadPro-Bold.otf, KozGoPr6N-Regular.otf
Plate Names                     : Cyan, Magenta, Yellow, Black, 10% Grey.spot, 20% Grey.spot, 60% Grey.spot, 40% Grey.spot, 30% Grey.spot
Swatch Groups Group Name        : Default Swatch Group
Swatch Groups Group Type        : 0
Swatch Groups Colorants Swatch Name: AutoCAD Color
Swatch Groups Colorants Type    : PROCESS
Swatch Groups Colorants Tint    : 100.000000
Swatch Groups Colorants Mode    : CMYK
Swatch Groups Colorants Cyan    : 75.020981
Swatch Groups Colorants Magenta : 67.968255
Swatch Groups Colorants Yellow  : 67.022198
Swatch Groups Colorants Black   : 90.164030
Producer                        : Adobe PDF library 15.00
Slug Family                     : Kozuka Gothic Pro
Slug Version                    : 4.015
Slug Outline File Size          : 0
Slug Kerning Checksum           : 0
Slug Foundry                    : Adobe Systems
Slug Font Kind                  : OpenType - PS
Slug Checksum                   : 2472964034
Slug Post Script Name           : KozGoPro-Regular
Slug Font Sense 12 Checksum     : 2472964034
Page Count                      : 1
Creator                         : Adobe Illustrator CC 2015 (Macintosh)

EXIF Metadata provided by EXIF.tools