SDI Technologies IBTS70 Rechargeable Bluetooth Speaker with Speakerphone and Accent Lighting User Manual iBTS70 IB 051717 v9 OL ai

Download:
Mirror Download [FCC.gov]
Document ID	3434917
Application ID	n8OTXUugC60UfIFsiIvz2g==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	83.5kB (1043706 bits)
Date Submitted	2017-06-22 00:00:00
Date Available	2017-06-22 00:00:00
Creation Date	2017-06-03 17:00:58
Producing Software	Acrobat Distiller 11.0 (Windows)
Document Lastmod	2017-06-03 17:00:58
Document Title	iBTS70 IB_051717_v9_OL.ai
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Robin

ModekiBTS70
Rechargeable
Bluetooth Speaker
with Speakerphone
and Accent Lighting
®
instruction manual
CHARGE
BEFORE
USE
iBTS7O
Introduction
Thank you for purchasing the iHome iBTS70. This product is designed to
provide high quality wireless sound for your Bluetooth audio device.
This instruction booklet explains the basic operation and care of the unit.
Please read them carefully and keep for future reference.
Maintenance
- Place the unit on a level surface away from sources of direct sunlight or
excesswe heat.
- Protect your furniture when placing your unit on a natural wood and
lacquered finish A cloth or other protective material should be placed
between it and the furniture.
- Clean your unit with a soft cloth mOistened only with mild soap and water.
Stronger cleaning agents, such as benzene, thinner or Similar materials
can damage the surface of the unit.
iBTS7O
What’s Included
- iBTS7O speaker
- USB chargmg cab‘e
- USB AC adapter
i BTS 7O
USB AC adapter USB charging cable
iBT$7O
MeethuriBTs7o
Top
B‘uetootn Status/
Low Battery
\ndxcator Lxgnt
chropnone
n l
Vowce Controt/ ——@ ® . o
Tatk/End Button
Power/I \gnt Button
P‘ay/Pausc/
B‘uetootn Paxnng Lower/Rawse Voturne Buttons
Button
Back
Chargxng \ndxcator Lxgnt
- sohd red : chargxng
- oft : My charged
USB \n Port
(to Charge unwt)
Reset Port
\w a
USB Charge Out Port
(to charge devwces)
iBT$7O
Getting Started:
Charging the Unit
CHARGE UNIT BEFORE USE/KEEP UNIT OFF FOR FASTER CHARGING
The blue Bluetooth/Low Battery indicator light on top of the unit flashes
tWice every 30 seconds when the battery is low/needs charging. The unit
will beep when the battery is extremely low.
T Connect the micro USB plug on the included USES charging cable to the
micro USB in Port on the back of the unit.
2. Connect the standard USB plug end of the cable to the included USB
AC adapter and plug adapter into a working wall outlet. For first time
use, charge unit for about 3 hours. The red charging status indicator
LED on back of the unit turns solid while unit is charging and turns off
once fully charged. The unit should play for up to 10 hours at moderate
listening volume.
TIP: on some iOS (Apple) deVice. you can view the iBTS7O battery status
on your device’s screen. When device is paired and connected, look for a
vertical battery icon next to he Bluetooth icon on the upper right corner
of the deVice’s screen.
x:-
Charge via USB AC adapter or other powered USB port il-lome ”37370 USB in Port
m an LG AMI fl
USB AC adapter
\ (included)
Connect USB AC adapter
to working outlet
Using the IBTS7O
Pairing Your Device
Pairing is the set—up process to introduce your Bluetooth-capable device to
the iBTS70. Once your device is paired, the iBTS7O can recognize it and you
can play your audio through it.
an,
i Turn on your Bluetooth device and make it "discoverable”
by turning on Bluetooth mode (check in Options or
Settings).
2. Press the Power Button to turn on the iBTS70. The first
time the unit is powered on, it Will enter auto—pairing
mode: the unit Will beep and the Bluetooth status
indicator light on top of the unit will flash quickly While
the unit attempts to pair.
3. “iHome iBTS70" should appear in your device's Bluetooth
menu. Select ”iHome iBTS70" on device to
begin/complete pairing. lf prompted for a passcode, enter
“1234" on your deVice's keypad. i beep Will sound and the
Bluetooth status indicator light Will appear solid blue,
indicating the iBTS7O is paired and ready to play mu5ic.
There should also be an indication on your deVIce. if no
device is successfully paired Within 3 minutes the iBTS7O
Will default to autolink mode for 5 minutes. if no device is
paired/linked, unit will then power off.
4. To pair with a different device or at a different time, make
sure unit is powered on, then press and hold the
Play/Pause/Bluetooth Button for 2 seconds Select
“iHome iBTS70" on device to pair
Once the iBTS7O is paired to a deVIce, it Will attempt to
autolink When the device is Within range (about 33 feet).
lf there is no audio for i2 minutes, the unit will
automatically power off to save battery life.
Using the IBTS7O
Playing Audio Via Bluetooth
i Press the @ Power Button to turn the iBTS7O ON. The Bluetooth status
indicator Will glow solid blue when a linked deVice is in range and detected. You
can then listen to audio streamed Wirelessly from your paired Bluetooth device.
Press the ® Play/Pause Button to play, pause Bluetooth audio.
Short press the (9 Lower Volume Button to lower volume.
Short press the @ Raise Volume Button to raise volume
When done listening, press the Power Button to turn the iBTS7O OFF.
meww
Speakerphone Operation
NOTE: The unit must be powered on and linked to a Bluetooth phone to receive a
call
i When a call is received, playing music‘is muted to hear the ring tone and the
cabinet lights flash green. Press the @Talk/End/Voice Control Button to
answer the call, or press and hold to reiect the call.
2. When a call is completed. press the ©Talk/End/Voice Control Button to end
the call and resume preVious function.
Voice Control Operation
NOTE: The unit must be powered on and linked to an iOS or Android Bluetooth
deVice to USQRVOlCG Control.
- Press the (D Talk/End/Voice Control Button and speak after the beep to
activate control With Siri or Google Now.
Voice control requires an active internet connection on connected Bluetooth
device with lOSiO orAndrOid 4i and later. When activated, the speaker
microphone acts as an extenSion of the microphone in your smartphone to
make/take calls, enable you to ask Siri/Google Now to play muSic and more.
Using the IBTS7O
Using the Accent Light
Unit must be powered ON to use accent iight
it Press and ho/d the Power/Light Button for 5 seconds to turn on the accent
light at the bottom of the iBTS70.
2. Press and hold the Power/Light Button for 5 seconds to turn oft the
iighting effect.
Charging Devices Using the USB Out Charge Port
it Connect the standard size end of a USB cabie to the USB Out Charging Port on
back of the unit and connect the other end to the USB charging port
on your device.
2. Monitor the charging on your deVice. Some deVices use a proprietary charging
method and Wili not charge using the USB Port if this happens, you must charge
your device usmg the charger that came with it.
MC]
‘ o
m LOANF
NOTE: Unit must be powered ON to
charge devices
Troubleshooting
Unit doesn’t respond (no power)
- Make sure unit is completely charged.
- Check that all connections are correct and properly plugged in.
- Make sure your device is properly paired with the iBTS70.
- Make sure the unit is on
Unit doesn’t respond (locked up/ “frozen”)
If the unit does not respond, try resetting it by inserting the end of a paper
clip or similar into the Reset Port on the back of the unit while unit is
powered ON.
Trouble pairing device with iBTS7O
Bluetooth implementation varies depending on your device's hardware and
operating system. Please see our website for updates on pairing.
- When you power ON the speaker, it will automatically link with the last
previously paired Bluetooth deVice it the device is still within range
(about 33 feet).
- if your device does not autoalink when within range, repair the device. To
do so, first delete the iBTS7O from your Bluetooth device's menu.
- To clear/reset Bluetooth on the unit, press and hold the
Play/Pause/Bluetooth Button for iO seconds
- Make sure your device is working properly. Check your device's manual
for details on Bluetooth pairing and linking.
For further information and to see the latest instructions, visit
www.ihome.com/support
Internal Rechargeable Lithium-ion Battery
This deVice uses an internal rechargeable lithiumeion battery that should
last the lifetime of the deVice. lf you suspect your battery may be dead,
try charging it several times. If the battery does not recharge, please
contact Customer Service at 4-800-288-2792.
WARNING/DISPOSAL OF UNIT
Please do NOT attempt to change the battery yourself. Doing so may
damage the unit and Will void the warranty. When disposing of unit, follow
the disposal instructions below:
- Never dispose of used batteries/electronics with ordinary solid wastes,
since they contain toxic substances.
- Always dispose of used batteries/electronics in accordance With the
prevailing community regulations that apply to the disposal of
batteries/electronics. If there are no local regulations concerning
battery/electronics disposal. please dispose of the deVice in a waste bin
for electronic deVices.
- Many electronics retailers now recycle batteries and other electronic
components at no charge. Check to see which ones in your area do so.
CAUTION
The battery used in this device may present a risk of fire, explosion or
chemical burn if mistreated
- Never use or charge the battery if it appears to be leaking. discolored.
deformed, or in any way abnormal.
- Never disassemble the unit or attempt to remove battery as that could
cause leakage of alkaline solution or other electrolytic substance.
- Always confirm that the temperature is 5°C — 35° C (4l° — 95° Fahrenheit)
before you charge the battery. Leakage or deterioration of the battery
may occur if this warning is not heeded.
- Never expose the battery to any liquid.
- Never expose the battery to excessive heat such as direct sunlight or fire.
Never use the battery pack in an unventilated vehicle where excessive
internal temperatures may be encountered.
- Always keep the battery out of the reach of infants and small children.
FCC Information iBTS7O
_ _ FCC ID:EMO|BTS7O
FCC Radiation Exposure Statement IC:98GB-|BTS7O
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment.
This device complies with Part 15 of the FCC Rules, operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
' Warning: Changes or modifications to this unit not expressly approved by the
party responsible for compliance could void the user's authority to operate the
equipment.
- NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device. pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the
instructions. may cause harmful interference to radio communications.
However. there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
~ Consult the dealer or an experienced radio/TV technician for help.
CAN ICES-3 (B)/NMB-3(B)
Canada Statement
This device complies with Industry Canada's licence-exempt RSSs. Operation is
subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause
undesired operation of the device.
Le present appareil est conforme aux CNR d’lndustrie Canada applicables aux
appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions
suivantes :
(1) l’appareil ne doit pas produire de brouillage;
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,
méme si le brouillage est susceptible d’en compromettre le fonctionnement.
The device meets the exemption from the routine evaluation limits in section 2.5 of
RSS 102 and compliance with RSS-TOZ RF exposure, users can obtain Canadian
information on RF exposure and compliance.
Le dispositif rencontre l’exemption des limites courantes d'évaluation dans la
section 2.5 de RSS 102 et la conformité a l'exposition de RSS-102 rf, utilisateurs peut
obtenir l'information canaclienne sur l'exposition et la conformité de rf.
TO
Consumer Product Safety Guide
IMPORTANT SAFETY INSTRUCTIONS
When used in the directed manner, this unit has been designed and
manufactured to ensure your personal safety. However, improper use can
result in potential electrical shock or fire hazards. Please read all safety and
operating instructions carefully before installation and use, and keep these
instructions handy for future reference. Take special note of all warnings
listed in these instructions and on the unit.
1. Water and Moisture — The unit should not be used near water. For example:
near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a
wet basement.
2. Ventilation — The unit should be situated so that its location or position does
not interfere with its proper ventilation. For example, it should not be situated
on a bed, sofa, rug or similar surface that may block ventilation openings.
Also, it should not be placed in a built—in installation, such as a bookcase or
cabinet, which may impede the flow of air through the ventilation openings.
3. Heat — The unit should be situated away from heat sources such as radiators,
heat registers, stoves or other appliances (including amplifiers) that produce
heat.
4. Power Sources — The unit should be connected to a power supply only of the
type described in the operating instructions or as marked on the appliance.
Only use the AC adapter that came with the unit.
5. Power—Cable Protection — Power supply cables should be routed so that they
are not likely to be walked on or pinched by items placed upon or against
them. It is always best to have a clear area from where the cable exits the unit
to where it is plugged into an AC socket.
Cleaning 7 The unit should be cleaned only as recommended. See the
Maintenance section of this manual for cleaning instructions.
Objects and Liquid Entry — Care should be taken so that objects do not fall
and liquids are not spilled into any openings or vents located on the product.
Attachments — Do not use attachments not recommended by the product
manufacturer.
Lightning and Power Surge Protection — Unplug the unit from the wall socket
and disconnect the antenna or cable system during a lightning storm or when
it is left unattended and unused for long periods of time. This will prevent
damage to the product due to lightning and power-line surges.
10. Overloading a Do not overload wall sockets, extension cords, or integral
convenience receptacles as this can result in a risk of fire or electric shock.
11. Damage Requiring Service — The unit should be serviced by qualified service
personnel when:
A the power supply cable or plug has been damaged.
B. objects have fallen into or liquid has been spilled into the enclosure.
C. the unit has been exposed to rain.
90.00va
the unit has been dropped or the enclosure damaged.
the unit exhibits a marked change in performance or does not operate
normally.
12. Periods of Nonuse r If the unit is to be left unused for an extended period of
time, such as a month or longer, charge the unit fully before storage
13. Servicing — The user should not attempt to service the unit beyond those
methods described in the user's operating instructions. Service methods not
covered in the operating instructions should be referred to qualified service
personnel.
14. Magnetic Interference: This product’s speakers contain powerful magnets
which could cause interference or damage to sensitive equipment such as
hard drives, CRT televisions and monitors, as well as medical, scientific, and
navigational devices. Keep this unit away from these products at all times.
ll
LIMITED 1 YEAR WARRANTY
iHome Products, a division of SDI Technologies Inc. (hereafter referred
to as SDI), warrants this product to be free from defects in workman—
ship and materials, under normal use and conditions, for a period of
one (i) year from the date of original purchase.
Should this product fail to function in a satisfactory manner, it is best
to first return it to the store where it was originally purchased. Should
this fail to resolve the matter and serVIce still be requrred by reason of
any defect or malfunction during the warranty period, SDI will repair
or. at its discretion. replace this product without charge. This deciSion
is subject to verification of the defect or malfunction upon delivery of
this product to the Factory SerVice Center authorized by Customer
Service.
If service is required, please call Customer Service at i—800—288—2792
to obtain a Return Authorization Number and shipping instructions. A
copy of the sales receipt is requrred to validate inewarranty coverage.
Disclaimer of Warranty
NOTE: This warranty is valid only if the product is used for the
purpose for which it was designed. It does not cover (i) products
which have been damaged by negligence or willful actions, misuse or
accident, or which have been modified or repaired by unauthorized
persons; (ii) cracked or broken cabinets, or units damaged by
excessive heat; (iii) damage to digital media players, CD’s or tape
cassettes (if applicable); (iv) the cost of shipping this product to the
Factory SerVice Center and its return to the owner.
This warranty is valid only in the United States of America and does
not extend to owners of the product other than to the original
purchaser. In no event will SDI or any of its affiliates, contractors,
resellers, their officers, directors,
shareholders, members or agents be liable to you or any third party
for any consequential or incidental damages, any lost profits. actual,
exemplary or punitive damages. (Some states do not allow limitations
on implied warranties or exclusion of consequential damages, so these
restrictions may not apply to you.) This warranty gives you specific
legal rights, and you may also have other rights which vary from state
to state.
Your acknowledgment and agreement to fully and completely abide
by the above mentioned disclaimer of warranty is contractually
binding to you upon your transfer of currency (money order, cashier’s
check. or credit card) for purchase of your SDI product.
© 2017 SDI Technologies, Inc. All rights reserved
Questions? Visit www.ihome.com
or call 1-800-288-2792 Toll Free
Bluetooth is a registered trademarks of Bluetooth SIG Inc.
Bluetooth technology is incorporated under license from Bluetooth SIG Inc.
iBTS7070425i7eA Printed in China

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : Robin
Create Date                     : 2017:06:03 17:00:58+08:00
Modify Date                     : 2017:06:03 17:00:58+08:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Creator Tool                    : PScript5.dll Version 5.2.2
Producer                        : Acrobat Distiller 11.0 (Windows)
Format                          : application/pdf
Title                           : iBTS70 IB_051717_v9_OL.ai
Creator                         : Robin
Document ID                     : uuid:5722426a-5145-4142-96bc-24d2c54b033f
Instance ID                     : uuid:270f7b65-db19-4168-8b33-8ea505a189b5
Page Count                      : 13

EXIF Metadata provided by EXIF.tools