SDI Technologies ICVBT10N REFLECT PRO (mirror with BT speaker funtion) User Manual iCVBT10 QSG 0427b
SDI Technologies Inc. REFLECT PRO (mirror with BT speaker funtion) iCVBT10 QSG 0427b
User Manual
iCVBT10 Vanity Mirror - Quick Start Guide (English) Size: 153 x 140 mm (folded) Color: 2C + 2C (PMS Cool Gray 9C & PMS Uncoated 2705U) Material: 120 gsm WF paper Date: April 27, 2018 (cost down) iHome Beauty REFL ECT PRO iCV BT 10/i CV BT 10 N Quick Start Guide PMS Cool Gray 9C PMS uncoated 2705 U Charging Mirror • Connect included AC adapter to DC jack on back of mirror and the other end to a working wall outlet Red Battery Status LED outlet Charging Devices Blue Bluetooth Status LED Bluetooth Button Mirror MUST be connected to power for USB charging from the unit. • Connect USB cable (not included) to USB port and the other end to your device to charge. Battery Level Indicators Red Battery Status LED Charging = solid red Fully charged = off Low Battery = flashing red (mirror is ON, not being charged) • Press and hold the light button for 2 seconds to hear voice announce battery charge status (mirror must be ON). Charge your phone while getting ready! Light Function • Press light button to turn ON Hi/Mid/Lo/OFF for the best light brightness You look Amazing! Detail Mirror • Attach included 10x magnifying detail mirror wherever you like on the mirror face (or anywhere!) • This mirror comes with a cleaning cloth to keep the large surface and detail mirror smudge free. • The back of the spot mirror has SimpleStick™ micro suction material for easily attaching and detaching almost anywhere. For best results, clean SimpleStick material with office tape. • If more cleaning is need try washing with mild soap and water as needed. Perfect for eyeliner, eyebrow tweezing and more! Bluetooth Audio Function • Press power button to turn speaker On or Off • When mirror is On, press and hold the Bluetooth button on back of mirror for pairing mode, indicated by the blinking BLUE LED • Select “iHome REFLECT PRO” on your device’s Bluetooth menu to connect • Press to play / pause Bluetooth audio • Press to answer/end Bluetooth calls • Press and hold for 2 seconds to decline Bluetooth calls • Quick double press for next track • Quick triple press for previous track • Press and hold for 2 seconds and wait for beep to activate voice control with Siri® / Google Assistant™ • Press to lower or raise volume Voice control requires an active internet connection on connected Bluetooth device with iOS 10 and Android 4.1 and later. When activated, the speaker microphone acts as an extension of the microphone in your smartphone to make/take calls, enable you to ask Siri®/Google Assistant™ to play music and more. Go ahead, turn UP the volume! Other Devices • Connect non-bluetooth devices using the included cable and AUX IN jack. RESET AUX USB • AUX IN audio works when Bluetooth audio is paused on connected Bluetooth device. IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. GENERAL • Please exercise caution when in use as the mirror is made of glass. 1. Water and Moisture – The unit should not be used near water. For example: near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement. 2. Ventilation – The unit should be situated so that its location or position does not interfere with its proper ventilation. For example, it should not be situated on a bed, sofa, rug or similar surface that may block ventilation openings. Also, it should not be placed in a built-in installation, such as a bookcase or cabinet, which may impede the flow of air through the ventilation openings. 3. Heat – The unit should be situated away from heat sources such as radiators, heat registers, stoves or other appliances (including amplifiers) that produce heat. Do not use around aerosol products or in the presence of oxygen being administered. 4. Sunlight – Never place the mirror in or expose the mirror to direct sunlight. The sun’s rays can reflect to become focused and cause excessive heat and/or fire. Do not use mirror in direct sunlight as reflected sunlight could injure eyes. 5. Power Sources – The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. 6. Power-Cable Protection – Power supply cables should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. It is always best to have a clear area from where the cable exits the unit to where it is plugged into an AC socket. 7. Cleaning – The unit should be cleaned only as recommended. See the Maintenance section of this manual for cleaning instructions. 8. Objects and Liquid Entry – Care should be taken so that objects do not fall and liquids are not spilled into any openings or vents located on the product. 9. Attachments – Do not use attachments not recommended by the product manufacturer. 10. Lightning and Power Surge Protection – Unplug the unit from the wall socket and disconnect the antenna or cable system during a lightning storm or when it is left unattended and unused for long periods of time. This will prevent damage to the product due to lightning and power-line surges. 11. Overloading – Do not overload wall sockets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock. 12. Damage Requiring Service – The unit should be serviced by qualified service personnel when: A. the power supply cable or plug has been damaged. B. objects have fallen into or liquid has been spilled into the enclosure. C. the unit has been exposed to rain. D. the unit has been dropped or the enclosure damaged. E. the unit exhibits a marked change in performance or does not operate normally. 13. Periods of Nonuse – If the unit is to be left unused for an extended period of time, such as a month or longer, the power cable should be unplugged from the unit to prevent damage or corrosion. 14. Servicing – The user should not attempt to service the unit beyond those methods described in the user’s operating instructions. Service methods not covered in the operating instructions should be referred to qualified service personnel 15. Follow all instructions. 16. Clean mirror surface only with included dry cloth. 17. Only use attachments/accessories specified by the manufacturer. FCC Information This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. • Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. • NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: QDID: B020415 • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. CAN ICES-3 (B)/NMB-3(B) FCC ID: EMOICVBT10N IC: 986B-ICVBT10N IC Statement for RF Device This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance. Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la section 2.5 de RSS 102 et la conformité à l'exposition de RSS-102 rf, utilisateurs peut obtenir l'information canadienne sur l'exposition et la conformité de rf. For warranty and full instructions visit: www.ihome.com/support © 2018 SDI Technologies, Inc. All rights reserved. Questions? Visit www.ihome.com or call 1-800-288-2792 Toll Free Siri is a trademark of Apple, Inc. in the United States and other countries. Google Assistant is a trademark of Google, Inc. April 27, 2018 iCVB10-180427-B Printed in China
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : Bill Dickson Create Date : 2018:04:30 14:51:25+08:00 Modify Date : 2018:04:30 14:51:35+08:00 Has XFA : No XMP Toolkit : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30 Creator Tool : Adobe Illustrator CC 2017 (Macintosh) Metadata Date : 2018:04:30 14:51:35+08:00 Thumbnail Width : 256 Thumbnail Height : 92 Thumbnail Format : JPEG Thumbnail Image : (Binary data 4731 bytes, use -b option to extract) Format : application/pdf Creator : Bill Dickson Title : iCVBT10 QSG_0427b Producer : Adobe PDF library 15.00 Document ID : xmp.did:cf775b22-6ec0-4162-a35e-1afda548943c Instance ID : uuid:219f8430-87db-b940-b132-30d53ff9d068 Original Document ID : uuid:cb0782e9-58a1-1e4f-9cfb-70e4e2e9cd8e Rendition Class : proof:pdf Derived From Instance ID : uuid:02999828-2517-c44e-9828-19cc7b131192 Derived From Document ID : xmp.did:dd6cd7d1-12cb-4ed7-869b-244ab267e0d0 Derived From Original Document ID: uuid:cb0782e9-58a1-1e4f-9cfb-70e4e2e9cd8e Derived From Rendition Class : default History Action : saved, saved History Instance ID : xmp.iid:d932de47-a313-5c46-8b3e-9154824b2bb1, xmp.iid:cf775b22-6ec0-4162-a35e-1afda548943c History When : 2015:10:14 15:16:33-04:00, 2018:04:30 14:51:20+08:00 History Software Agent : Adobe Illustrator CC 2014 (Windows), Adobe Illustrator CC 2017 (Macintosh) History Changed : /, / Manifest Link Form : EmbedByReference, EmbedByReference Manifest Reference File Path : iCVBT7_8_5_15.953.png, iCVBT7_8_5_15.952.png Ingredients File Path : iCVBT7_8_5_15.953.png, iCVBT7_8_5_15.952.png N Pages : 1 Has Visible Transparency : True Has Visible Overprint : True Max Page Size W : 201.602420 Max Page Size H : 192.607036 Max Page Size Unit : Millimeters Font Name : ArialMT, Arial-BoldMT, Gotham-Light, Gotham-Book, Gotham-Medium, MyriadPro-Regular, MyriadPro-Semibold Font Family : Arial, Arial, Gotham, Gotham, Gotham, Myriad Pro, Myriad Pro Font Face : Regular, Bold, Light, Book, Medium, Regular, Semibold Font Type : Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type Font Version : Version 5.01.2x, Version 5.01.2x, Version 2.201 Pro, Version 2.201 Pro, Version 2.201 Pro, OTF 1.006;PS 001.000;Core 1.0.23;hotunix 1.28, OTF 1.006;PS 001.000;Core 1.0.23;hotunix 1.28 Font Composite : False, False, False, False, False, False, False Font File Name : Arial.ttf, Arial Bold.ttf, Gotham-Light.otf, Gotham-Book.otf, Gotham-Medium.otf, MyriadPro-Regular.otf, MyriadPro-Semibold.otf Plate Names : Cyan, Magenta, Yellow, Black, PANTONE 2705 U, PANTONE Cool Gray 6 C, PANTONE Cool Gray 9 C Swatch Group Name : Default Swatch Group Swatch Group Type : 0 Swatch Colorant Swatch Name : PANTONE Cool Gray 6 C, PANTONE 3245 U, PANTONE 3242 U, PANTONE 324 U, PANTONE Cool Gray 9 C, PANTONE 7467 C, C=0 M=100 Y=100 K=0 1, PANTONE 2705 U Swatch Colorant Type : SPOT, SPOT, SPOT, SPOT, SPOT, SPOT, PROCESS, SPOT Swatch Colorant Tint : 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000 Swatch Colorant Mode : Lab, Lab, Lab, Lab, Lab, CMYK, CMYK, Lab Swatch Colorant L : 69.019608, 79.215683, 79.607841, 80.392159, 50.196079, 75.686272 Swatch Colorant A : 0, -43, -38, -28, 0, 9 Swatch Colorant B : -1, -5, -9, -8, -2, -25 Swatch Colorant Cyan : 100.000000, 0.000000 Swatch Colorant Magenta : 6.182956, 100.000000 Swatch Colorant Yellow : 35.776302, 100.000000 Swatch Colorant Black : 0.000000, 0.000000 Slug Family : Arial Slug Version : 5.06 Slug Outline File Size : 0 Slug Kerning Checksum : 0 Slug Foundry : Monotype Typography Slug Font Kind : OpenType - TT Slug Checksum : 1252007918 Slug Post Script Name : ArialMT Slug Font Sense 12 Checksum : 1252007918 Page Count : 8 For : Joyce Young, Bounding Box : -424 -1353 3302 -11 Container Version : 11 Creator Version : 21EXIF Metadata provided by EXIF.tools