SDI Technologies ICVBT5 6 inch Double Sided Vanity Mirror with Bluetooth Mono Speaker User Manual iCVBT5 QSG v6 1101115

Download:
Mirror Download [FCC.gov]
Document ID	2818495
Application ID	Pho0Z4C2oGEG3+s1C5wCYA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	14.64kB (182979 bits)
Date Submitted	2015-11-22 00:00:00
Date Available	2015-11-22 00:00:00
Creation Date	2015-11-12 12:03:28
Producing Software	Adobe PDF library 15.00
Document Lastmod	2015-11-12 12:03:54
Document Title	iCVBT5 QSG_v6_1101115
Document Creator	Adobe Illustrator CC 2015 (Macintosh)
Document Author:	Bill Dickson

| Beauty
iCVBT5
Quick Start Guide
Audio Function
• Press power button to turn speaker On or Off
• When mirror is On, press and hold for pairing
mode, indicated by the blinking BLUE LED
• Select “iHome iCVBT5” on your device’s
Bluetooth menu to connect
• Press to play / pause Bluetooth audio
• Press to answer / end Bluetooth calls
• Press and hold to activate Siri / Google Now
- feature requires internet connection • Double press for next track
• Triple press for previous track
• Press to lower or raise volume
I’m not your grandma’s makeup mirror.
Light Function
• Press light button to turn ON Hi/Lo/OFF
for the best light brightness
Light turns OFF after 25 minutes to save power.
You look
Amazing!
Charging Devices
Mirror MUST be connected to AC adapter to
enable USB charging from the unit.
• Connect USB cable (not included) to USB port
and the other end to your device to charge.
outlet
AUX
USB
Other Devices
• Connect non-bluetooth devices with the
included cable and AUX IN jack.
AUX
USB
• AUX IN audio works when audio is paused
on connected Bluetooth device.
Go ahead, Turn UP the volume!
IMPORTANT SAFETY INSTRUCTIONS
When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in
potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions
handy for future reference. Take special note of all warnings listed in these instructions and on the unit.
1. Water and Moisture – The unit should not be used near water. For example: near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in
a wet basement.
2. Ventilation – The unit should be situated so that its location or position does not interfere with its proper ventilation. For example, it should not be situated
on a bed, sofa, rug or similar surface that may block ventilation openings. Also, it should not be placed in a built-in installation, such as a bookcase or
cabinet, which may impede the flow of air through the ventilation openings.
3. Heat – The unit should be situated away from heat sources such as radiators, heat registers, stoves or other appliances (including amplifiers) that produce
heat.
4. Power Sources – The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance.
5. Power-Cable Protection – Power supply cables should be routed so that they are not likely to be walked on or pinched by items placed upon or against
them. It is always best to have a clear area from where the cable exits the unit to where it is plugged into an AC socket.
6. Cleaning – The unit should be cleaned only with damp cloth.
7. Objects and Liquid Entry – Care should be taken so that objects do not fall and liquids are not spilled into any openings or vents located on the product.
8. Attachments – Do not use attachments not recommended by the product manufacturer.
9. Lightning and Power Surge Protection – Unplug the unit from the wall socket during a lightning storm or when it is left unattended and unused for
long periods of time. This will prevent damage to the product due to lightning and power-line surges.
10. Overloading – Do not overload wall sockets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.
11. Damage Requiring Service – The unit should be serviced by qualified service personnel when:
A. the power supply cable or plug has been damaged.
B. objects have fallen into or liquid has been spilled into the enclosure.
C. the unit has been exposed to rain.
D. the unit has been dropped or the enclosure damaged.
E. the unit exhibits a marked change in performance or does not operate normally.
12. Periods of Nonuse – If the unit is to be left unused for an extended period of time, such as a month or longer, the power cable should be unplugged
from the unit to prevent damage or corrosion.
13. Servicing – The user should not attempt to service the unit beyond those methods described in the user’s operating instructions. Service methods
not covered in the operating instructions should be referred to qualified service personnel.
FCC Information
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
• Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
• NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAN ICES-3 (B)/NMB-3(B)
LIMITED 1 YEAR WARRANTY
iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects in workmanship
and materials, under normal use and conditions, for a period of one (1) year from the date of original purchase.
Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased. Should this fail
to resolve the matter and service still be required by reason of any defect or malfunction during the warranty period, SDI will repair or, at its
discretion, replace this product without charge. This decision is subject to verification of the defect or malfunction upon delivery of this product to
the Factory Service Center authorized by Customer Service.
If service is required, please call Customer Service at 1-800-288-2792 to obtain a Return Authorization Number and shipping instructions.
Disclaimer of Warranty
NOTE: This warranty is valid only if the product is used for the purpose for which it was designed. It does not cover (i) products which have been
damaged by negligence or willful actions, misuse or accident, or which have been modified or repaired by unauthorized persons; (ii) cracked or
broken cabinets, or units damaged by excessive heat; (iii) damage to digital media players, CD’s or tape cassettes (if applicable); (iv) the cost of
shipping this product to the Factory Service Center and its return to the owner.
This warranty is valid only in the United States of America and does not extend to owners of the product other than to the original purchaser. In
no event will SDI or any of its affiliates, contractors, resellers, their officers, directors, shareholders, members or agents be liable to you or any
third party for any consequential or incidental damages, any lost profits, actual, exemplary or punitive damages. (Some states do not allow
limitations on implied warranties or exclusion of consequential damages, so these restrictions may not apply to you.) This warranty gives you
specific legal rights, and you may also have other rights which vary from state to state.
Your acknowledgment and agreement to fully and completely abide by the above mentioned disclaimer of warranty is contractually binding to you
upon your transfer of currency (money order, cashier's check, or credit card) for purchase of your SDI product.
© 2015 SDI Technologies, Inc. All rights reserved.
Questions? Visit www.ihome.com
or call 1-800-288-2792 Toll Free
Siri is a trademark of Apple, Inc. in the United States and other countries.
Goggle Now is a trademark of Google, Inc.
FCC ID: EMOICVBT5
IC: 986B-ICVBT5
IC Statement for RF Device
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may
cause undesired operation of the device.
This equipment should be installed and operated With minimum distance 15mm between the radiator & your body.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation
est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit
accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
Cet ¨|quipement doit ¨otre install¨| et utilis¨| ¨¤ une distance minimale de 15mm entre le radiateur et votre corps.
The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF
exposure, users can obtain Canadian information on RF exposure and compliance.
Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la section 2.5 de RSS 102 et la conformité à l'exposition
de RSS-102 rf, utilisateurs peut obtenir l'information canadienne sur l'exposition et la conformité de rf.
iCVBT5-111215-A
QDID: B0XXXXX
Printed in China


---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 5.6-c067 79.157747, 2015/03/30-23:40:42
Creator Tool                    : Adobe Illustrator CC 2015 (Macintosh)
Create Date                     : 2015:11:12 12:03:28+08:00
Modify Date                     : 2015:11:12 12:03:54+08:00
Metadata Date                   : 2015:11:12 12:03:54+08:00
Thumbnail Width                 : 256
Thumbnail Height                : 180
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 7374 bytes, use -b option to extract)
Format                          : application/pdf
Creator                         : Bill Dickson
Title                           : iCVBT5 QSG_v6_1101115
Producer                        : Adobe PDF library 15.00
Document ID                     : xmp.did:4e911c8d-75f6-4ee8-950e-05ae91c77c15
Instance ID                     : uuid:aadc2ae9-6c18-c640-80cb-451dbff2daaf
Original Document ID            : uuid:cb0782e9-58a1-1e4f-9cfb-70e4e2e9cd8e
Rendition Class                 : proof:pdf
Derived From Instance ID        : uuid:831b55da-16f7-dd4c-bb59-a14ae4b145b8
Derived From Document ID        : xmp.did:09ec3557-11fa-4a0b-bd4d-aadaebf43704
Derived From Original Document ID: uuid:cb0782e9-58a1-1e4f-9cfb-70e4e2e9cd8e
Derived From Rendition Class    : default
History Action                  : saved, saved
History Instance ID             : xmp.iid:d932de47-a313-5c46-8b3e-9154824b2bb1, xmp.iid:4e911c8d-75f6-4ee8-950e-05ae91c77c15
History When                    : 2015:10:14 15:16:33-04:00, 2015:11:12 12:03:28+08:00
History Software Agent          : Adobe Illustrator CC 2014 (Windows), Adobe Illustrator CC 2015 (Macintosh)
History Changed                 : /, /
N Pages                         : 1
Has Visible Transparency        : False
Has Visible Overprint           : True
Max Page Size W                 : 153.000000
Max Page Size H                 : 140.000000
Max Page Size Unit              : Millimeters
Font Name                       : ArialMT, Arial-BoldMT, Gotham-Light, Gotham-Medium, MyriadPro-Regular, MyriadPro-Semibold
Font Family                     : Arial, Arial, Gotham, Gotham, Myriad Pro, Myriad Pro
Font Face                       : Regular, Bold, Light, Medium, Regular, Semibold
Font Type                       : Open Type, Open Type, Open Type, Open Type, Open Type, Open Type
Font Version                    : Version 5.06, Version 5.06, Version 1.200, Version 1.200, Version 2.106;PS 2.000;hotconv 1.0.70;makeotf.lib2.5.58329, Version 2.106;PS 2.000;hotconv 1.0.70;makeotf.lib2.5.58329
Font Composite                  : False, False, False, False, False, False
Font File Name                  : Arial.ttf, Arial Bold.ttf, Gotham-Light.otf, Gotham-Medium.otf, MyriadPro-Regular.otf, MyriadPro-Semibold.otf
Plate Names                     : Cyan, Magenta, Yellow, Black, PANTONE 324 U, PANTONE Cool Gray 6 C
Swatch Groups Group Name        : Default Swatch Group
Swatch Groups Group Type        : 0
Swatch Groups Colorants Swatch Name: PANTONE 324 U
Swatch Groups Colorants Type    : SPOT
Swatch Groups Colorants Tint    : 100.000000
Swatch Groups Colorants Mode    : LAB
Swatch Groups Colorants L       : 80.392159
Swatch Groups Colorants A       : -28
Swatch Groups Colorants B       : -8
Slug Family                     : Arial
Slug Version                    : 5.06
Slug Outline File Size          : 0
Slug Kerning Checksum           : 0
Slug Foundry                    : Monotype Typography
Slug Font Kind                  : OpenType - TT
Slug Checksum                   : 3939600684
Slug Post Script Name           : Arial-BoldMT
Slug Font Sense 12 Checksum     : 3939600684
Page Count                      : 8
Author                          : Bill Dickson

EXIF Metadata provided by EXIF.tools