SDI Technologies ICVBT52 Vanity Speaker User Manual iCVBT52 QSG v2 1201
SDI Technologies Inc. Vanity Speaker iCVBT52 QSG v2 1201
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3253003 |
| Application ID | aDu9PwKx3DMvmPbQZ81doA== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 20.12kB (251448 bits) |
| Date Submitted | 2017-01-09 00:00:00 |
| Date Available | 2017-01-09 00:00:00 |
| Creation Date | 2016-12-01 09:27:34 |
| Producing Software | Adobe PDF library 15.00 |
| Document Lastmod | 2016-12-01 09:27:34 |
| Document Title | iCVBT52 QSG_v2-1201 |
| Document Creator | Adobe Illustrator CC 2015 (Macintosh) |
| Document Author: | Bill Dickson |
| Beauty iCVBT52 Vanity Speaker Quick Start Guide Audio Function • Press power button to turn speaker On or Off • When mirror is On, press and hold for pairing mode, indicated by the blinking BLUE LED • Select “iHome iCVBT52” on your device’s Bluetooth menu to connect • • • • • Press to play / pause Bluetooth audio Press to answer / end Bluetooth calls Press and hold to activate Siri / Google Now - feature requires internet connection Double press for next track Triple press for previous track • Press to lower or raise volume I’m not your grandma’s makeup mirror. Light Function • Press light button to turn ON Hi/Lo/OFF for the best light brightness Light turns OFF after 25 minutes to save power. You look Amazing! Charging Devices Mirror MUST be connected to AC adapter to enable USB charging from the unit. • Connect USB cable (not included) to USB port and the other end to your device to charge. outlet Other Devices • Connect non-bluetooth devices with the included cable to the AUX IN jack. • AUX IN audio works when audio is paused on connected Bluetooth device. Go ahead, Turn UP the volume! IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. GENERAL • Please exercise caution when in use as the mirror is made of glass. 1. Water and Moisture – The unit should not be used near water. For example: near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement. 2. Ventilation – The unit should be situated so that its location or position does not interfere with its proper ventilation. For example, it should not be situated on a bed, sofa, rug or similar surface that may block ventilation openings. Also, it should not be placed in a built-in installation, such as a bookcase or cabinet, which may impede the flow of air through the ventilation openings. 3. Heat – The unit should be situated away from heat sources such as radiators, heat registers, stoves or other appliances (including amplifiers) that produce heat. Do not use around aerosol products or in the presence of oxygen being administered. Never place the mirror in or expose the mirror to direct sunlight. Left unattended, the sun’s rays can reflect to become focused and cause excessive heat and/or fire. 4. Power Sources – The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. 5. Power-Cable Protection – Power supply cables should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. It is always best to have a clear area from where the cable exits the unit to where it is plugged into an AC socket. 6. Cleaning – The unit should be cleaned only as recommended. See the Maintenance section of this manual for cleaning instructions. 7. Objects and Liquid Entry – Care should be taken so that objects do not fall and liquids are not spilled into any openings or vents located on the product. 8. Attachments – Do not use attachments not recommended by the product manufacturer. 9. Lightning and Power Surge Protection – Unplug the unit from the wall socket and disconnect the antenna or cable system during a lightning storm or when it is left unattended and unused for long periods of time. This will prevent damage to the product due to lightning and power-line surges. 10. Overloading – Do not overload wall sockets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock. 11. Damage Requiring Service – The unit should be serviced by qualified service personnel when: A. the power supply cable or plug has been damaged. B. objects have fallen into or liquid has been spilled into the enclosure. C. the unit has been exposed to rain. D. the unit has been dropped or the enclosure damaged. E. the unit exhibits a marked change in performance or does not operate normally. 12. Periods of Nonuse – If the unit is to be left unused for an extended period of time, such as a month or longer, the power cable should be unplugged from the unit to prevent damage or corrosion. 13. Servicing – The user should not attempt to service the unit beyond those methods described in the user’s operating instructions. Service methods not covered in the operating instructions should be referred to qualified service personnel. FCC Information This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference and (2) This device must accept any interference received, including interference that may cause undesired operation This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. • Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. • NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. CAN ICES-3 (B)/NMB-3(B) LIMITED 1 YEAR WARRANTY iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original purchase. Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased. Should this fail to resolve the matter and service still be required by reason of any defect or malfunction during the warranty period, SDI will repair or, at its discretion, replace this product without charge. This decision is subject to verification of the defect or malfunction upon delivery of this product to the Factory Service Center authorized by Customer Service. If service is required, please call Customer Service at 1-800-288-2792 to obtain a Return Authorization Number and shipping instructions. Disclaimer of Warranty NOTE: This warranty is valid only if the product is used for the purpose for which it was designed. It does not cover (i) products which have been damaged by negligence or willful actions, misuse or accident, or which have been modified or repaired by unauthorized persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage to digital media players, CD’s or tape cassettes (if applicable); (iv) the cost of shipping this product to the Factory Service Center and its return to the owner. This warranty is valid only in the United States of America and does not extend to owners of the product other than to the original purchaser. In no event will SDI or any of its affiliates, contractors, resellers, their officers, directors, shareholders, members or agents be liable to you or any third party for any consequential or incidental damages, any lost profits, actual, exemplary or punitive damages. (Some states do not allow limitations on implied warranties or exclusion of consequential damages, so these restrictions may not apply to you.) This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Your acknowledgment and agreement to fully and completely abide by the above mentioned disclaimer of warranty is contractually binding to you upon your transfer of currency (money order, cashier's check, or credit card) for purchase of your SDI product. © 2016 SDI Technologies, Inc. All rights reserved. Questions? Visit www.ihome.com or call 1-800-288-2792 Toll Free Siri is a trademark of Apple, Inc. in the United States and other countries. Goggle Now is a trademark of Google, Inc. FCC ID: EMOICVBT52 IC: 986B-ICVBT52 IC Statement for RF Device This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance. Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la section 2.5 de RSS 102 et la conformité à l'exposition de RSS-102 rf, utilisateurs peut obtenir l'information canadienne sur l'exposition et la conformité de rf. DID: DOXXXXX iCVBT52-161201-B Printed in China iCVBT52 QSG (ENGLISH) size (folded): 153 x 140(mm) X 8 2C + 2C, 120gsm WF paper Dec 1, 2016 Cool gray 6C PMS324U | Beauty iCVBT52 Vanity Speaker Quick Start Guide
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No XMP Toolkit : Adobe XMP Core 5.6-c111 79.158366, 2015/09/25-01:12:00 Creator Tool : Adobe Illustrator CC 2015 (Macintosh) Create Date : 2016:12:01 09:27:34+08:00 Modify Date : 2016:12:01 09:27:34+08:00 Metadata Date : 2016:12:01 09:27:34+08:00 Format : application/pdf Producer : Adobe PDF library 15.00 Document ID : xmp.did:16634e28-dab0-4b62-8021-6f05a4f1c6a1 Instance ID : uuid:8de793cf-b460-fd46-8437-37f97bba53fa Original Document ID : uuid:cb0782e9-58a1-1e4f-9cfb-70e4e2e9cd8e Rendition Class : proof:pdf N Pages : 1 Has Visible Transparency : True Has Visible Overprint : True Thumbnail Width : 256 Thumbnail Height : 180 Thumbnail Format : JPEG Thumbnail Image : (Binary data 8707 bytes, use -b option to extract) Creator : Bill Dickson Title : iCVBT52 QSG_v2-1201 Derived From Instance ID : uuid:379bb04c-e9e9-8349-a15a-1d1c3514d274 Derived From Document ID : xmp.did:7fc56434-d288-4227-a0f0-e3a44471a07f Derived From Original Document ID: uuid:cb0782e9-58a1-1e4f-9cfb-70e4e2e9cd8e Derived From Rendition Class : default History Action : saved, saved History Instance ID : xmp.iid:d932de47-a313-5c46-8b3e-9154824b2bb1, xmp.iid:16634e28-dab0-4b62-8021-6f05a4f1c6a1 History When : 2015:10:14 15:16:33-04:00, 2016:12:01 09:27:29+08:00 History Software Agent : Adobe Illustrator CC 2014 (Windows), Adobe Illustrator CC 2015 (Macintosh) History Changed : /, / Max Page Size W : 153.000000 Max Page Size H : 140.000000 Max Page Size Unit : Millimeters Font Name : Gotham-Light, Gotham-Medium, ArialMT, Arial-BoldMT, MyriadPro-Regular Font Family : Gotham, Gotham, Arial, Arial, Myriad Pro Font Face : Light, Medium, Regular, Bold, Regular Font Type : Open Type, Open Type, Open Type, Open Type, Open Type Font Version : Version 2.201 Pro, Version 2.201 Pro, Version 5.01.2x, Version 5.01.2x, Version 2.106;PS 2.000;hotconv 1.0.70;makeotf.lib2.5.58329 Font Composite : False, False, False, False, False Font File Name : Gotham-Light.otf, Gotham-Medium.otf, Arial.ttf, Arial Bold.ttf, MyriadPro-Regular.otf Plate Names : Cyan, Magenta, Yellow, Black, PANTONE Cool Gray 6 C Swatch Groups Group Name : Default Swatch Group Swatch Groups Group Type : 0 Swatch Groups Colorants Swatch Name: PANTONE 324 U Swatch Groups Colorants Type : SPOT Swatch Groups Colorants Tint : 100.000000 Swatch Groups Colorants Mode : LAB Swatch Groups Colorants L : 80.392159 Swatch Groups Colorants A : -28 Swatch Groups Colorants B : -8 Slug Family : Arial Slug Version : 5.01.2 Slug Outline File Size : 0 Slug Kerning Checksum : 0 Slug Foundry : Monotype Typography Slug Font Kind : OpenType - TT Slug Checksum : 2169611603 Slug Post Script Name : ArialMT Slug Font Sense 12 Checksum : 2169611603 Page Count : 9 Author : Bill DicksonEXIF Metadata provided by EXIF.tools