SDI Technologies ID11 Portable Bluetooth Stereo System with Speakerphone for iPad, iPhone or iPod User Manual iD11 IB 05031
SDI Technologies Inc. Portable Bluetooth Stereo System with Speakerphone for iPad, iPhone or iPod iD11 IB 05031
Users Manual
Model: iD11
iD11 IB (English)
Size: 153mm x 120mm
Printing color: Black
Apr. 24, 12. P1
Portable Bluetooth Stereo System
with Speakerphone
for iPad, iPhone or iPod
Questions? Visit www.ihomeaudio.com
Introduction
Thank you for purchasing this unit. This product is designed to provide high quality wireless sound for your
iPad, iPhone, iPod, computer, PDA or other Bluetooth audio device.
Along with the included Quick Bluetooth Connection Guide this instruction booklet explains the basic
operation and care of the unit. Please read them carefully and keep for future reference.
Maintenance
• Place the unit on a level surface away from sources of direct sunlight or excessive heat.
• Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth
or other protective material should be placed between it and the furniture.
• Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning
agents, such as Benzene, thinner or similar materials can damage the surface of the unit.
Table of Contents
Meet Your Unit...................................................................................................1-2
Setting up the Unit ................................................................................................ 3
Playing your iPad, iPhone or iPod / Playing Audio Via Aux .......................................... 4
Using Bluetooth: Pairing Your Device ........................................................................ 5
Playing Audio Via Bluetooth / Using the Speakerphone............................................... 6
Watching Videos in Landscape Mode / Troubleshooting ............................................. 7
Consumer Product Safety Guide.............................................................................. 8
Warranty Information ............................................................................................ 9
P2
SRS WOW®, which features TruBass®, significantly improves the playback quality of audio, delivering a
dynamic 3RD entertainment experience with deep, rich bass and high frequency clarity for crisp detail.
is a registered trademark of SRS Labs, Inc. TruBass technology is incorporated under license from SRS Labs, Inc.
P3
FCC Information
• Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
• NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and
your body.
This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter
must not be co-located or operating in conjunction with any other antenna or transmitter.
This Device complies with RSS-210 of the IC Rules; Operation is subject to the following two conditions:
(1) This device may not cause interference and
(2) This device must accept any interference received, including interference that may cause undesired operation
mode
Meet Your Unit
1
Battery compartment door
Rear of Unit Bottom of Unit
P4
Top of Unit (open)
Power Button/Power Indicator Light
/Mode Button – Volume Down Button
Play/Pause/Pairing/Bluetooth Button/Indicator Light
+ Volume Up Button
Retractable Dock
Support back rest for
iPad, iPhone or iPod
Remote auto/on switch
Aux-in Jack
AC Adaptor jack
Dock Release Button
DC 9V 3A
Meet Your Unit
P1
2
Included
• IC system
• 1 100V-240V AC Adaptor
AC adaptoriD11 system
DC 9V 3A
Setting up the Unit
to Operate on Power
1. Connect the included AC adaptor to the
AC Adaptor Jack on the back of the unit.
2. Connect the plug to a working outlet.
Setting up the Unit
to Operate on Batteries
The unit operates on 4 AA batteries for
portable use. When the sound becomes weak
or distorted, it’s time to replace the batteries
with fresh ones.
1. Turn the unit over and slide open the
battery compartment door located on the
bottom of the unit.
2. Insert 4 AA batteries as shown, making
sure to match the polarity (+ or -) to the
diagram inside the battery compartment.
3. Close the battery compartment.
P6
NOTE: When the unit is connected to a
power source, it will charge a docked
iPad, iPhone or iPod. It will not charge
while operating on batteries.
3
Make sure to dispose of batteries according to local regulations.
RESET
RESET
TEST
TEST
Playing Audio via Aux-in
1. Un dock (or pause/stop) any currently docked device. Connect a standard 3.5 mm stereo
audio plug to the headphone or line-out jack on your audio device and the other end to the
Aux-in jack located on the back of the unit.
2. Press and hold the Button for about 2 seconds to turn on the unit.
3. Turn on your audio device and place it in play mode.
4. Press and release the Mode Button to toggle the unit between iPod/Aux-in audio mode
and Bluetooth mode (the Button is NOT lit in iPod/Aux-in mode).
5. Use the Volume +/- Buttons to adjust volume. You may wish to adjust the volume on your
audio device, too.
6. When done listening, press and release the Button to turn the unit off. Remember to turn
off your audio device, too.
Playing your iPad, iPhone or iPod
1. Make sure the unit has a power source (4 AA batteries are installed or AC adaptor is
connected). Power output (volume) will be lower when operating on batteries.
2. Press the Dock Release Button on the back of the unit to expose the flexible 30 pin
connector (if dock is retracted).
3. Gently dock a playing iPad, iPhone or iPod. The unit will power on indicated by the power
light turning blue and in a moment, you will hear the audio from your device.
4. If the volume on your sound source is too low, the unit may not detect it/turn on. If this
happens, press the Button to turn the unit on.
5. Control your iPad, iPhone or iPod music using its iPod controls. Use the Volume +/– Buttons
on the unit to adjust system volume.
6. When you are done listening, press the Button to turn unit off.
P7
4
5
Using Bluetooth: Pairing Your Device
NOTE: See the iD11 Bluetooth Connection Guide for complete pairing details.
1. Turn on Bluetooth capability on your device and make it discoverable (see your device’s
instructions to add or setup a Bluetooth device).
2. Press and hold the Play/Pause/Pairing Button for about 2 seconds to turn the
unit on in Bluetooth mode. The light will alternately flash blue and green while the unit
attempts to pair.
3. “iD11” should appear in your device’s list of Bluetooth devices; its status display may
indicate “not paired” or “not connected”. Select iD11 to connect. If your device asks for
a password, enter 1234 on the keyboard, keypad or display of your device. If no device
is paired within 3 minutes, the pairing attempt will stop. If this occurs, retry steps 2-3.
4.
Once paired with a device, the light will glow steadily blue. There should be an
indication on your device that pairing is complete. On some devices, you must then select
“Use as Audio Device (stereo)” or similar on the device’s Bluetooth menu. Once paired,
your device should link to the iD11 whenever within range.
Use Bluetooth mode to listen to audio streamed wirelessly from your paired iPad, iPhone, iPod
or other Bluetooth device.
1. Press and hold the Button to turn on the unit in Bluetooth mode. The Button light will
flash as the unit searches for a previously paired device, then turn solid when a previously
paired device is detected. (If unit is already ON, press the Mode Button to toggle the unit
between iPod/Aux-in audio mode and Bluetooth mode (the Button is lit in Bluetooth mode).
2. Press and release the Play/Pause/Pairing Button to play or pause audio from your
Bluetooth device.
NOTE: Play/Pause only controls connected Bluetooth or docked iPad, iPhone or iPod devices.
It does not control aux line-in devices.
3. Use the Volume +/- Buttons to adjust volume.
4. When done listening, press and hold the Button for 2 seconds to turn the unit off.
You can use the unit as a speakerphone for a linked Bluetooth-capable phone during an incoming or
active call. To make a call, dial your phone as usual. To redial the last number called (on phones that
support the feature), press the Button on the unit twice.
1. The Button will flash red and the Button will flash green during an incoming call. When a
call is received, playing music is muted to hear the ring tone.
2. Press the Button to answer the call, or press the Button to ignore it. Use the same controls for
call waiting: press the Button to answer and switch between calls, or press the Button to
ignore a new call.
3. Use the Volume +/- Buttons to adjust speaker volume.
4. When the call is completed, press the Button to end the call and resume previous function.
Playing Audio Via Bluetooth
Using the Speakerphone
6
P8
7
Troubleshooting
Unit doesn’t respond (no power)
• Check that all connections are correct and properly plugged in. If operating on batteries, make sure
batteries are fresh and are properly installed.
Resetting the unit
If the unit does not respond properly or appears to be “frozen”, you may wish to try resetting it. To do so,
press and hold the + and – Buttons at the same time for 8 seconds until the unit makes a long beep.
Note: Resetting the unit you erase all current settings. You will have to re-pair any Bluetooth devices.
• Make sure you have the latest firmware for your iPad, iPhone or iPod (update via iTunes if needed).
• Make sure your device is working properly.
For further information and to see the latest instructions,visit www.ihomeaudio.com/support
1. Remove any docked device from the unit.
2. Press gently on the Retracting Dock to store it inside the body of the unit.
3. Place your device sideways in the dock area resting against the back rest.
4. For Aux-in audio: Connect audio cable to the device’s headphone jack to the aux in jack on
the back of the unit, and press and release the Mode Button to access Aux-in mode (make
sure the Button is not lit,indicating iPod/Aux-in mode.
For Bluetooth Audio: Press and hold the Button for 2 seconds to place unit in Bluetooth
mode if unit is off, or press and release the Mode Button to toggle to Bluetooth mode (make
sure the Button is lit,indicating Bluetooth mode.
5. Play the video on your device.
6. Use the Volume +/- Buttons to adjust volume.
7. When done listening, press the Button to turn the unit off.
Watching Videos in Landscape Mode
Consumer Product Safety Guide
8
When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use
can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use,
and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit.
1. Water and Moisture – The unit should not be used near water. For example: near a bathtub, washbowl, kitchen sink, laundry tub,
swimming pool or in a wet basement.
2. Ventilation – The unit should be situated so that its location or position does not interfere with its proper ventilation. For example, it
should not be situated on a bed, sofa, rug or similar surface that may block ventilation openings. Also, it should not be placed in a
built-in installation, such as a bookcase or cabinet, which may impede the flow of air through the ventilation openings.
3. Heat – The unit should be situated away from heat sources such as radiators, heat registers, stoves or other appliances (including
amplifiers) that produce heat.
4. Power Sources – The unit should be connected to a power supply only of the type described in the operating instructions or as marked
on the appliance.
5. Power-Cable Protection – Power supply cables should be routed so that they are not likely to be walked on or pinched by items placed
upon or against them. It is always best to have a clear area from where the cable exits the unit to where it is plugged into an AC
socket.
6. Cleaning – The unit should be cleaned only using a warm damp cloth. Do not use solvents, etc.
7. Objects and Liquid Entry – Care should be taken so that objects do not fall and liquids are not spilled into any openings or vents
located on the product.
8. Attachments – Do not use attachments not recommended by the product manufacturer.
9. Lightning and Power Surge Protection – Unplug the unit from the wall socket and disconnect the antenna or cable system during a
lightning storm or when it is left unattended and unused for long periods of time. This will prevent damage to the product due to lightning
and power-line surges.
10. Overloading – Do not overload wall sockets, extension cords, or integral convenience receptacles as this can result in a risk of fire or
electric shock.
11. Damage Requiring Service – The unit should be serviced by qualified service personnel when:
A. the power supply cable or plug has been damaged.
B. objects have fallen into or liquid has been spilled into the enclosure.
C. the unit has been exposed to rain.
D. the unit has been dropped or the enclosure damaged.
E. the unit exhibits a marked change in performance or does not operate normally.
12. Periods of Nonuse – If the unit is to be left unused for an extended period of time, such as a month or longer, the power cable should
be unplugged from the unit to prevent damage or corrosion.
13. Servicing – The user should not attempt to service the unit beyond those methods described in the user’s operating instructions. Service
methods not covered in the operating instructions should be referred to qualified service personnel.
Questions? Visit www.ihomeaudio.com
or call 1-800-288-2792 Toll Free
IMPORTANT SAFETY INSTRUCTIONS
P9
Limited 1 Year Warranty
iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI Technologies), warrants this product to be free from
defects in workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original purchase.
Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased.
Should this fail to resolve the matter and service still be required by reason of any defect or malfunction during the warranty period,
SDI Technologies will repair or, at its discretion, replace this product without charge (except for a $15.00 charge for handling,
packing, return UPS/postage, and insurance). This decision is subject to verification of the defect or malfunction upon delivery of this
product to the Factory Service Center listed below. The product must include proof of purchase, including date of purchase. The fee
for service without proof of purchase is $40.00.
Before returning this product for service, please first replace the batteries (if applicable) with fresh ones, as exhausted or defective
batteries are the most common cause of problems encountered.
If service is still required:
1. Remove the batteries (if applicable) and pack the unit in a well padded, heavy corrugated box.
2.
Enclose a photocopy of your sales receipt, credit card statement, or other proof of the date of purchase, if within the warranty period.
3.
Enclose a check or money order payable to the order of SDI Technologies, for the sum of $15.00 ($40.00 without proof of purchase).
4. Send the unit prepaid and insured, to the Factory Service Center listed below.
Consumer Repair Department
SDI Technologies Inc.
1330 Goodyear Drive
El Paso, TX 79936-6420
Disclaimer of Warranty
NOTE: This warranty is valid only if the product is used for the purpose for which it was designed. It does not cover (i) products
which have been damaged by negligence or willful actions, misuse or accident, or which have been modified or repaired by
unauthorized persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage to digital media players,
CD’s or tape cassettes (if applicable); (iv) the cost of shipping this product to the Factory Service Center and its return to the owner.
This warranty is valid only in the United States of America and does not extend to owners of the product other than to the original
purchaser. In no event will SDI Technologies or any of its affiliates, contractors, resellers, their officers, directors, shareholders, members
or agents be liable to you or any third party for any consequential or incidental damages, any lost profits, actual, exemplary or
punitive damages. (Some states do not allow limitations on implied warranties or exclusion of consequential damages, so these
restrictions may not apply to you.) This warranty gives you specific legal rights, and you may also have other rights which vary from
state to state.
Your acknowledgement and agreement to fully and completely abide by the above mentioned disclaimer of warranty is contractually
binding to you upon your transfer of currency (money order, cashier's check, or credit card) for purchase of your SDI Technologies
product. © 2012 SDI Technologies, Inc. All rights reserved
Questions? Visit www.ihomeaudio.com or call 1-800-288-2792 Toll Free.
iD11-050312-A Printed in China
P10