SDI Technologies ISB02 WiFi Leak Sensor User Manual iSB02 Dual Leak Sensor QSG v10
SDI Technologies Inc. WiFi Leak Sensor iSB02 Dual Leak Sensor QSG v10
User Manual
Intelligent Home Solutions
Model: iSB02
Monitor your home from anywhere with your smartphone
Wi-Fi DUAL LEAK SENSOR
Quick Start Guide
WHAT YOU’LL NEED
Apple device running iOS 9.3 or later or Android device running KitKat 4.4
or later connected to your preferred WiFi network
WiFi network transmitting at 2.4GHz; WPA2 security type
NOTE: If you intend to use a mix of devices (iOS AND Android), please set up
the Sensor using your iOS device and then share to your Android device(s).
Questions? 1.800.288.2792 www.ihome.com
Overview: About Your Dual Leak Sensor 1Installing Batteries
Your sensor comes with 2 AA batteries which must be installed before use.
Gently pull the front of the sensor forward using the battery
access tab on top of the sensor to release the front of the
main unit.
Place the batteries in the battery compartment as shown.
Make sure polarity (+/–) matches the markings in the
product.
Press the front and back cabinet together.
1
2
3
23
Wi-Fi Setup
NOTE: We recommend performing setup in the same location you intend to
place your sensor.
Download and open the iHome Control app from the App Store or Google Play.
Login to or create an iHome account
Press sensors icon and then the Add Device Button.
Press and hold the Action Button on your sensor for 5 seconds until green LED is
flashing, then release.
Enter the following setup code when prompted in the app.
NOTE: If you see a solid or flashing RED LED, press and hold the Action Button
for 5 seconds and then repeat steps 2 and 3
1
2
3
4
NOTE: When typing, dashes are not required
5
iHome Control provides 24-7 remote home monitoring from anywhere. The free iHome
Control app keeps you aware of changes in your home environment even when you’re
not home. For information about compatible products and to purchase Sensors and
SmartPlugs, visit iHome.com.
Meet the iHome Control family of
Intelligent Home solutions 67
Notices
FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
To assure continued FCC compliance:
1. Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to
operate the equipment.
2. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance 20cm between the radiator & your body.
FEDERAL COMMUNICATIONS COMMISSION
INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
IC
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should
be installed and operated with minimum distance 20cm between the radiator and your body.
Cet appareil radio est conforme au CNR-247d’Industrie Canada. L’utilisation de ce dispositif est autorisée seulement aux
deux conditions suivantes : (1) il ne doit pas produire de brouillage, et (2) l’utilisateur du dispositif doit être prêt à accepter
tout brouillage radioélectrique reçu, même si ce brouillage est susceptible de compromettre le fonctionnement du
dispositif.
Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé.
Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre
corps.
CAN ICES-(B)/NMB-3(B)
8
For warranty information:
visit https://www.ihomeaudio.com/support/
GENERAL BATTERY PRECAUTIONS
• Never use or charge a battery if it appears to be leaking,
discolored, deformed, or in any way abnormal.
• Do not mix old and new batteries
• Use onlynew batteries of the type recommended
• Avoid charging a rechargeable battery when the temperature is not within
5°C - 35°C (41° - 95° Fahrenheit).
• Never expose a battery to any liquid.
• Never expose a battery to excessive heat such as direct sunlight or fire. Never use a battery
pack in an unventilated vehicle
where excessive internal temperatures may be encountered.
• Always keep batteries out of the reach of infants and small children.
• Remove batteries if device will not be used for a prolonged period to avoid corrosion which
can damage the unit
• Dispose of batteries that are leaking
Dispose of batteries in accordance with local regulations
9
4
Cable Clasp
Top view
Secondary Leak
Detection Probe
Main Leak
Detection Probe
Action Button
Buzzer
Flashing Green: Sensor is ready to
connect to a Wi-Fi
network
Solid Green: Sensor is connected
to a Wi-Fi network
(appears briefly
after setup)
Flashing Red: Sensor failed setup,
please try setup again.
Wi-Fi Status Indicators
Battery
Access
Ta b
When placing your leak sensors:
• Ensure the leak detection probes are placed face down in a location that may
experience water flow early. This may be a low point in a basement, in or near a
sump pump, behind a washing machine, near sinks, toilets, hot water heaters, etc.
The goal is to notify you of unexpected water as soon as possible.
• The secondary detection probe provides an extra point for leak monitoring
and is placed in an area near the main probe (for example, main probe under sink,
extension probe under toilet). Please use the included cable clasp to ensure that
the detection probe remains face down. Remove the backing from the
double-stick tape and press down on a clean, smooth surface.
• Your sensor is equipped with a loud buzzer that will sound any time liquid is
detected. You may press the action button on your sensor to silence the buzzer
and acknowledge the warning.
Sensor Placement and Operation
Note: The product is intended for early leak detection and is not
intended to be submerged in water at any time.
iSB02_2017_QSG_v4
Model: iSB04 QSG (English)
Size: 153mm x 98mm
Date : August 16,2017
Pages:
Version:
Accordian style
Quick Start Guide
FRONT
BACK