SDI Technologies LIB17E7 Bluetooth Rechargeable Speaker User Manual Li B17 IB 06192015

SDI Technologies Inc. Bluetooth Rechargeable Speaker Li B17 IB 06192015

User Manual

Download: SDI Technologies LIB17E7 Bluetooth Rechargeable Speaker User Manual Li B17 IB 06192015
Mirror Download [FCC.gov]SDI Technologies LIB17E7 Bluetooth Rechargeable Speaker User Manual Li B17 IB 06192015
Document ID2762186
Application IDUnS4w4BTAT2UEqLHKdtAOw==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize81.51kB (1018835 bits)
Date Submitted2015-09-25 00:00:00
Date Available2015-09-25 00:00:00
Creation Date2015-06-19 14:27:36
Producing SoftwareAdobe PDF library 11.00
Document Lastmod2015-06-19 14:27:36
Document TitleLi-B17 IB_06192015
Document CreatorAdobe Illustrator CC 2014 (Macintosh)

Model: Li-B17E7 (Front)
IB (English)
Size: 432Wmm x 400Hmm
Color: Print in Black color
Date: June 19, 2015
Maintenance
For Models That Use Lithium Batteries
• Lithium batteries can explode or cause burns if disassembled, shorted,
exposed to water, fire, or high temperatures & not handled appropriately
• Do not place loose batteries in a pocket, purse, or other container
containing metal objects, do not mix with used or other battery types, or
store with hazardous or combustible materials.
• Store in cool, dry, ventilated area.
• Follow applicable laws and regulations for transport and disposal.
A Consumer Guide to Product Safety
IMPORTANT SAFETY INSTRUCTIONS
When used in the directed manner, this unit has been designed and manufactured to ensure
your personal safety. However, improper use can result in potential electrical shock or fire
hazards. Please read all safety and operating instructions carefully before installation and use,
and keep these instructions handy for future reference. Take special note of all warnings listed
in these instructions and on the unit.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
Water and Moisture – The unit should not be used near water. For example: near a
bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement.
Ventilation – The unit should be situated so that its location or position does not interfere
with its proper ventilation. For example, it should not be situated on a bed, sofa, rug or
similar surface that may block ventilation openings. Also, it should not be placed in a
built-in installation, such as a bookcase or cabinet, which may impede the flow of air
through the ventilation openings.
Heat – The unit should be situated away from heat sources such as radiators, heat
registers, stoves or other appliances (including amplifiers) that produce heat.
Power Sources – The unit should be connected to a power supply only of the type
described in the operating instructions or as marked on the appliance.
Power-Cable Protection – Power supply cables should be routed so that they are not
likely to be walked on or pinched by items placed upon or against them. It is always best
to have a clear area from where the cable exits the unit to where it is plugged into an AC
socket.
Cleaning – The unit should be cleaned only as recommended. See the Maintenance
section of this manual for cleaning instructions.
Objects and Liquid Entry – Care should be taken so that objects do not fall and liquids
are not spilled into any openings or vents located on the
product.
Attachments – Do not use attachments not recommended by the product manufacturer.
Lightning and Power Surge Protection – Unplug the unit from the wall socket and
disconnect the antenna or cable system during a lightning storm or when it is left unattended
and unused for long periods of time. This will prevent damage to the product due to
lightning and power-line surges.
Overloading – Do not overload wall sockets, extension cords, or integral convenience
receptacles as this can result in a risk of fire or electric shock.
Damage Requiring Service – The unit should be serviced by qualified service personnel
when:
A. the power supply cable or plug has been damaged.
B. objects have fallen into or liquid has been spilled into the enclosure.
C. the unit has been exposed to rain.
D. the unit has been dropped or the enclosure damaged.
E. the unit exhibits a marked change in performance or does not operate normally.
Periods of Nonuse – If the unit is to be left unused for an extended period of time, such
as a month or longer, the power cable should be unplugged from the unit to prevent
damage or corrosion.
Servicing – The user should not attempt to service the unit beyond those methods
described in the user’s operating instructions. Service methods not covered in the
operating instructions should be referred to qualified service personnel.
•
•
•
Using Bluetooth with the Li-B17
Place the unit on a level surface away from sources of direct sunlight or excessive heat.
Protect your furniture when placing your unit on a natural wood and lacquered finish.
A cloth or other protective material should be placed between it and the furniture.
Clean your unit with a soft cloth moistened only with mild soap and water. Stronger
cleaning agents such as thinner or similar materials can damage the surface of the unit.
Limited 1 Year Warranty Information
eKids, LLC warrants this product to be free from defects in workmanship and materials, under
normal use and conditions, for a period of one (1) year from the date of original purchase.
Should this product fail to function in a satisfactory manner, it is best to first return it to the store
where it was originally purchased. Should this fail to resolve the matter and service still be required
by reason of any defect or malfunction during the warranty period, eKids will repair or, at its
discretion, replace this product without charge. This decision is subject to verification of the
defect or malfunction upon delivery of this product to the Factory Service Center authorized by
Customer Service. If service is required, please call Customer Service at 1-800-288-2792 to
obtain a Return Authorization Number and shipping instructions.
Disclaimer of Warranty
NOTE: This warranty is valid only if the product is used for the purpose for which it was designed.
It does not cover (i) products which have been damaged by negligence or willful actions, misuse
or accident, or which have been modified or repaired by unauthorized persons; (ii) cracked or
broken cabinets, or units damaged by excessive heat; (iii) damage to digital media players, CD’s
or tape cassettes (if applicable); (iv) the cost of shipping this product to the Factory Service
Center and its return to the owner.
This warranty is valid only in the United States of America and does not extend to owners of the
product other than to the original purchaser. In no event will eKids or any of its affiliates, contractors,
resellers, their officers, directors,
shareholders, members or agents be liable to you or any third party for any consequential or
incidental damages, any lost profits, actual, exemplary or punitive damages. (Some states do
not allow limitations on implied warranties or exclusion of consequential damages, so these
restrictions may not apply to you.) This warranty gives you specific legal rights, and you may
also have other rights which vary from state to state.
Your acknowledgement and agreement to fully and completely abide by the above mentioned
disclaimer of warranty is contractually binding to you upon your transfer of currency (money
order, cashier's check, or credit card) for purchase of your eKids product.
Questions? Visit www.ekids.com
For any other questions: 1-800-288-2792 Toll Free
© & ™ Lucasfilm Ltd. Used Under License. eKids LLC
Model: Li-B17E7
Bluetooth
Rechargeable
Speaker
• Whenever the unit is set to Bluetooth ( ) mode, the Li-B17 will attempt to
autolink a previously paired device for 3 minutes. If no device is paired, or to
pair a new device, follow the steps below:
• Make sure your Bluetooth device and the Li-B17 are fully charged. Turn on
your Bluetooth device and turn on Bluetooth mode (check in Options or
Settings).
• Slide the of Aux/OFF/ Switch on the speaker to the Bluetooth position
( ). Press and hold the Bluetooth Pairing Button
for 3 seconds. The red
LED light will flash quickly, and a tone will sound as the speaker enters pairing
mode.
• “StarWarsLi-B17” should appear on your device. If “Not Connected” or similar
message appears, select “StarWarsLi-B17” to connect. If your device asks for
a passcode, enter ‘1234’.
• Once paired, a confirmation tone will sound and the red LED will shut off. You
can then stream audio to the speaker.
• Control Bluetooth audio from your device. Remember to turn off the speaker
and your device after listening.
• If no device is paired within 3 minutes, a failure tone will sound, the red light will
flash slowly and the unit will revert to standby mode. To retry pairing, press and
hold the Bluetooth Pairing Button
for 3 seconds. If pairing is not successful,
turn the power “OFF” on the speaker and repeat pairing procedure.
CHARGE
BEFORE
USE
Questions? Visit www.ekids.com
FCC ID: EMOLIB17E7
IC: 986B-LIB17E7
FCC Information
FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the
following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired
operation of the device.
The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance
with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance.
NOTE: To cancel current pairing mode, quickly press the Bluetooth Pairing
Button for 1 second.
Answer / End Calls
This device complies with Part 15 of the FCC Rules, operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
The Li-B17 also comes equipped with a Speakerphone function which will be
active when a call is coming through to your linked Bluetooth device. When an
incoming call is received on your device, briefly press the Bluetooth
Pairing/Spearkerphone/Sound Effects Button on the speaker once to answer
the call. Press and hold for 2 seconds to reject the call. Speak into the microphone
during the call. To end the call, briefly press the Bluetooth
Pairing/Speakerphone/Sound Effects Button again.
•
Warning: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
•
Using the Li-B17 with Aux Devices
Charging the Li-B17
The Li-B17 is powered by a rechargeable battery in the speaker. Make sure to
charge speaker before use, using supplied combination cable.
• Connect the micro-USB plug to the
Audio/Charging jack on the speaker.
• Connect the standard USB plug to a powered USB port, such as that on a
computer. Your computer should be connected to a wall outlet when speaker
is charging. The light on the speaker will turn to solid red while charging and
turn off when fully charged.
• When the battery is low, the red LED light will turn on. If you start to notice
sound distortion at higher volumes, it's time to recharge the batteries.
NOTE: The charging LED light will override the pairing LED light pattern.
• Connect the micro-USB plug to the
Audio/Charging jack on the speaker.
• Connect the stereo 3.5mm audio plug to the headphone jack or line-out of
any audio device.
• Slide the Aux/OFF/ Switch on the speaker to the “Aux” position.
• Press play on your audio device and adjust its volume to listen to audio.
• When done listening, move the Aux/OFF/ Switch to the OFF position to turn
the unit off. Remember to turn off your audio device, too.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de
brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.
CAN ICES-3 (B)/NMB-3(B)
Declaration ID: D024962
IMPORTANT
Questions? Visit www.ekids.com
Li-B17-061915-A
Read before proceeding
If you have any question regarding the operation or use of this product, please visit www.ekids.com
to view answers to frequently asked questions.
To learn more about this and other iHome products, please visit us online at www.ekids.com
Printed in China
Top View
Standard USB plug
Audio/
Charging Jack
Micro USB plug
3.5mm audio plug
Press and hold to pair
to play
Aux/OFF/
Switch
Combination cable
Bluetooth Pairing/
Speakerphone/
Sound Effects
Bluetooth Mode
Charging the Li-B17 CHARGE BEFORE USE
Microphone
AUX-in Jack
LED
Micro USB
Computer
connected to
working outlet
Standard USB
3.5mm plug
Computer USB port
OR
USB AC adaptor
(not included)
Mobile Phone
PC/Tablet
Game Devices
iPod
Aux-in Mode
Laptop
MP3/MP4
Note: The unit is equipped with a Try Me feature. Before using the unit, pull out and discard the plastic Demo Tab located on the bottom panel .
Note: The unit is equipped with a Try Me feature.When unit is OFF, press the Bluetooth Pairing/Speakerphone/Sound Effects Button to play/stop built-in music.
USB AC adaptor
connected to working outlet

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.6-c014 79.156821, 2014/08/29-03:07:50
Format                          : application/pdf
Title                           : Li-B17 IB_06192015
Metadata Date                   : 2015:06:19 14:27:36+08:00
Modify Date                     : 2015:06:19 14:27:36+08:00
Create Date                     : 2015:06:19 14:27:36+08:00
Creator Tool                    : Adobe Illustrator CC 2014 (Macintosh)
Thumbnail Width                 : 256
Thumbnail Height                : 240
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 25847 bytes, use -b option to extract)
Instance ID                     : uuid:89a5c8e9-d026-3e40-a9d6-8cef54c170d3
Document ID                     : xmp.did:6431264b-0358-42d8-9f20-333189b46c06
Original Document ID            : uuid:5D20892493BFDB11914A8590D31508C8
Rendition Class                 : proof:pdf
Derived From Instance ID        : uuid:f7defe2b-5bfc-e14b-a255-b61646bfaf98
Derived From Document ID        : xmp.did:dcb66573-03ee-4506-9251-7b82cd25cd1e
Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved
History Instance ID             : xmp.iid:5fc9109d-be07-4e42-a889-9e6693bcc51f, xmp.iid:6431264b-0358-42d8-9f20-333189b46c06
History When                    : 2015:05:29 09:30:37-04:00, 2015:06:19 14:27:31+08:00
History Software Agent          : Adobe Illustrator CC 2014 (Macintosh), Adobe Illustrator CC 2014 (Macintosh)
History Changed                 : /, /
Startup Profile                 : Print
Has Visible Overprint           : True
Has Visible Transparency        : True
N Pages                         : 1
Max Page Size W                 : 480.000028
Max Page Size H                 : 449.999806
Max Page Size Unit              : Millimeters
Font Name                       : ArialMT, Arial-BoldMT, Arial-Black, ArialNarrow, Futura-Bold, Helvetica-Light, Helvetica, Helvetica-Bold, HelveticaNeue-BoldCond, HelveticaNeue-Light, HelveticaNeue-LightItalic, HelveticaNeue-Medium, HelveticaNeue-Heavy, HelveticaNeue-HeavyItalic, MyriadPro-Regular, MyriadPro-Black
Font Family                     : Arial, Arial, Arial Black, Arial Narrow, Futura, Helvetica, Helvetica, Helvetica, Helvetica Neue, Helvetica Neue, Helvetica Neue, Helvetica Neue, Helvetica Neue, Helvetica Neue, Myriad Pro, MyriadPro Black
Font Face                       : Regular, Bold, Regular, Regular, Bold, Light, Regular, Bold, 77 Bold Condensed, 45 Light, 46 Light Italic, 65 Medium, 85 Heavy, 86 Heavy Italic, Regular, Black
Font Type                       : Open Type, Open Type, Open Type, Open Type, Type 1, TrueType, TrueType, TrueType, Type 1, Type 1, Type 1, Type 1, Type 1, Type 1, Open Type, Unknown
Font Version                    : Version 5.06, Version 5.06, Version 5.00.1x, Version 2.38.1x, 001.003, 8.0d3e1, 8.0d3e1, 8.0d3e1, 001.000, 001.000, 001.000, 001.000, 001.000, 001.100, Version 2.106;PS 2.000;hotconv 1.0.70;makeotf.lib2.5.58329, Version 2.106;PS 2.000;hotconv 1.0.70;makeotf.lib2.5.58329
Font Composite                  : False, False, False, False, False, False, False, False, False, False, False, False, False, False, False, False
Font File Name                  : Arial.ttf, Arial Bold.ttf, Arial Black.ttf, Arial Narrow.ttf, FuturBol; Futura, Helvetica.dfont, Helvetica.dfont, Helvetica.dfont, HelveNeuBolCon; Helvetica Neue SFAD, HelveNeuLig; Helvetica Neue SFAD, HelveNeuLigIta; Helvetica Neue SFAD, HelveNeuMed; Helvetica Neue SFAD, HelveNeuHea; Helvetica Neue SFAD, HelveNeuHeaIta; Helvetica Neue SFAD, MyriadPro-Regular.otf, MyriadPro-Regular.otf
Plate Names                     : Cyan, Magenta, Yellow, Black, 40% Grey.spot, 60% Grey.spot, 10% Grey.spot, 30% Grey.spot, 20% Grey.spot
Swatch Groups Colorants Tint    : 100.000000
Swatch Groups Group Name        : Brights
Swatch Groups Group Type        : 1
Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0
Swatch Groups Colorants Mode    : CMYK
Swatch Groups Colorants Type    : PROCESS
Swatch Groups Colorants Cyan    : 60.000000
Swatch Groups Colorants Magenta : 90.000000
Swatch Groups Colorants Yellow  : 0.003100
Swatch Groups Colorants Black   : 0.003100
Producer                        : Adobe PDF library 11.00
Slug Family                     : Helvetica Neue
Slug Version                    : 10.0
Slug Outline File Size          : 0
Slug Kerning Checksum           : 0
Slug Foundry                    : Linotype AG
Slug Font Kind                  : TrueType
Slug Checksum                   : 4115874249
Slug Font Sense 12 Checksum     : 4115874249
Slug Post Script Name           : MyriadPro-Black
Page Count                      : 1
Creator                         : Adobe Illustrator CC 2014 (Macintosh)
EXIF Metadata provided by EXIF.tools
FCC ID Filing: EMOLIB17E7

Navigation menu