SDR Electronics 4045 4045-TRPAUTOS User Manual itripautoQS2 ipod

SDR Electronics 4045-TRPAUTOS itripautoQS2 ipod

Contents

User Manual

quick start guidequick start guideTroubleshootingProblems? No problem. Check these tips for a quick fix: FM Radio 1. On? 2. Tuned to unused frequency? 3. Radio volume adjusted? iTrip 1. Has iTrip gone in low power mode? iTrip goes in a power-saver mode after an extended period of no music. To get the music going again, just press Play on your iPod, or disconnect and reconnect iTrip to your iPod. 2. iTrip and radio frequencies match? iPod 1. Hold switch on? 2. Play button depressed? 3. Battery completely drained? If so, your iPod must recharge for a few short minutes before so your iPod will sense a constant current and power up. Fuses 1. Car's Cigarette Lighter fuse good? (Consult your car's owners manual for fuse locations and specifications) 2. iTrip Auto's fuse blown? Check the replaceable fuse located near the front of the unit. An automotive blade-type mini fuse (sometimes called an ATM fuse) rated at 2 Amps can be obtained at most auto or hardware supply stores.Problem's not solved? No problem.Call Griffin's Customer Support at 800-208-5996. Monday - Thursday 9 am - 6 pm and Friday 9am - 5pm Central time.Your call will be answered by real human beings who actually know and use Griffin products.Griffin stands behind every product with the industry’s best customer service, backed by a simple, fair warranty. Please read our warranty details at www.griffintechnology.com/support/ before using this Griffin product.© 2007 Griffin Technology, Inc. • www.griffintechnology.com • SmartScan is a trademark of Griffin Technology, Inc., and iTrip is a registered trademark of Griffin Technology, Inc. • iPod is a trademark of Apple Inc., registered in the U.S. and other countries. • Patents pending • Made in China • Designed in TennesseeTechnical SpecificationsBuilt for iPod models that use thefull-size Dock Connector.Transmitter Dimensions: 2.2” L x 1.02“ D x .43” H ( 58mm L x 26mm D x 11mm H)Total Length: 44.5” (115.6cm)Weight: 56gAntenna: Built-inPower: Provided by 12 Volt cigarette lighter or power outlet (no batteries required)Input voltage range: 12 – 16 Volts DCMaximum current: 2 AmpOutput voltage: 5.2 Volts DC at 1 AmpFuse type: 2 Amp blade-type automotive fuseModulation: FM StereoAvailable output RF ranges (region preset at factory): U.S.: 88.1 MHz ± 107.9 MHz Japan: 76.0 MHz ± 90.0 MHz Other Countries: 88.0 MHz ± 108.0 MHzRadio Frequency Adjustment Increments: Japan: 0.1 MHz per step U.S. and Other Countries: 0.2 MHz per stepRadio Frequency Response: 50 Hz ± 15 kHzOperating Range: 10 – 30 feet (~3m-9.1m)itripautoQS2 ipod.ai 8/14/07 1230pmSD12Using Other FrequenciesIn areas with numerous overlapping radio stations, you may need to switch frequencies to get the best possible sound, dependingon your location. Here’s how: Using the presets 1. Press FUNCTION—>PRESET Select any of the three saved presets. (iTrip will exit this menu automatically after about 3 seconds.) 2. Tune your car’s FM radio to the new frequency displayed on iTrip’s screen. Tuning Manually Manual tuning is a reverse of the SmartScan process; you tune your car stereo first, then adjust iTrip to match that frequency. 1. On your car’s FM radio, select a frequency on which you hear nothing but static. The ideal choice would have nothing on either of the neighboring frequencies, so listen for 3 in a row with static and select the middle frequency. 2. Press + or – to set iTrip to match that frequency. Press the + or – and hold to move through the frequencies quickly. Setting your own presets Do you have a long commute that has you hunting frequencies as radio stations fade in and out of range? Or are you a long-time iTrip user who already knows the perfect three frequencies? Either way, iTrip lets you set your own presets for quick recall. 1. Tune your iTrip to the desired frequency. 2. Press FUNCTION—>PRESET (iTrip will automatically exit this menu after about 3 seconds.) 3. Press and hold PRESET 1, PRESET 2 or PRESET 3 for 2 seconds. Screen blinks once and the selected PRESET button lights to indicate that it is stored successfully.Stereo or Mono for Best SoundPress FUNCTION—>MODE—>MONO (Broadcasts in mono, resulting in a stronger signal than stereo.) Use for podcasts, talk radio, audiobooks and similar tracks. Use in heavily populated areas where numerous FM stations crowd the dial.Press FUNCTION—>MODE—>STEREO (Broadcasts in stereo, for more realistic audio.) Use for music and musical podcasts. Use for best possible Right/Left Channel stereo separation.-OR-Scanning91.991.9Preset ModeScan106.991.92 312 31Function106.9Preset ModeScan106.9Function106.9Preset ModeScan106.9106.9Function106.9Preset ModeScan106.9StereoMono106.9Function106.9FUSEautomotive blade type-2106.9MonoStereoiTrip123121231233"Made for iPod" means that an electronic accessory has been designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation.Griffin Technology4045-TRPAUTOSThe manufacturer is not responsible for any radio or tv interference caused by unauthorized modificationsto this equipment. Such modifications could void the user’s authority to operate the equipment.Thanks for purchasing Griffin Technology’s iTrip Auto with SmartScan.The easiest way to charge and play in your car. SmartScan finds and saves the best frequencies to play your iPod on your car's FM stereo.Connect1. Connect iTrip Auto's Dock Connector to your iPod.2. Plug the cigarette lighter adapter into your car’s cigarette lighter or power outlet. This will power your iTrip Auto and charge your iPod at the same time.Charge3-stage Light RingRed LED is on: iTrip is correctly plugged in, ready to charge your iPod and operatethe iTrip transmitter.Amber LED is on: iTrip is charging your iPodand is providing power to iTrip’s FM transmitter.Green LED is on: Your iPod is fully chargedand there is power to iTrip’s FM transmitter.™®Auto™®AutoPlayiTrip Auto with SmartScan makes playing your iPod on your car stereo easier than ever. Here’s how to make it happen:SmartScan for Clear Frequencies1. Press FUNCTION —> SCAN SmartScan scans all available FM frequencies and saves the 3 clearest frequencies to iTrip’s 3 presets. SmartScan takes about 25 seconds to complete the process, then automatically chooses the clearest frequency and displays it on iTrip’s high-contrast OLED display.2. Set your FM stereo Tune your car’s FM radio to the frequency displayed on iTrip’s screen.3. Play your iPod Press Play and enjoy the music.®Auto®Auto2 16543

Navigation menu