SEARS Battery Charger Manual L0305345
User Manual: SEARS SEARS Battery charger Manual SEARS Battery charger Owner's Manual, SEARS Battery charger installation guides
Open the PDF directly: View PDF 
.
Page Count: 8
| Download | |
| Open PDF In Browser | View PDF |
SEARS OWNER'S MANUAL Model No. 47001 1.5 AMP FULLY AUTOMATIC ONBOARD BATTERY CHARGER MAINTAINER CAUTION: Read and Follow All Safety Rules and Operating Instructions Before Every Use of this Product. Sears Canada Inc., 222 Jarvis St., Toronto, Ontario, Canada MSB 2B8 Table Of Contents Warranty ..................................................................... Important Safety Instructions ................................... Before Using Your Battery Charger ......................... Plugging it in .......................................................... Extsnsion cords ..................................................... 1 2 3 3 3 Using Your Battery Charger ..................................... What to expect from your charger ........................ Installing the charger ............................................ Preparing your battery to be charged .................. Charging your battery ........................................... Charging indicators .............................................. Maintenance and care .......................................... Please read this Owner's Manual before using your Battery Charger The Sears model 47001 Fully Automatic Onboard Battery Charger/Maintainer, offers features to accommodate the needs for home or light commercial use. This manual will show you how to use your charger safely and effectively. Please read and follow these instructions and precautions carefully. Warranty FULL TWO-YEAR WARRANTY If, withintwo years from the date of purchase, this battery charger fails due to a defect in materials or workmanship, simply RETURN IT TO THE NEAREST SEARS STORE IN CANADA, and Sears will replace it, free of charge. This warranty gives you specific legal rights, and you may also have other rights which vary from province to province. Sears Canada, Inc. Toronto, Ontario, M5B 2B8 4 4 4 5 5 6 6 Important Safety - SAVE THESE Instructions INSTRUCTIONS • Read all instructions and cautions printed on the battery charger, battery, and vehicle or equipment using battery. - • Do not disassemble charger. Take it to a qualified service professional if service or repair is required. Incorrect assembly may result in fire or electrical shock. • Use charger only on lead-acid type rechargeable batteries, such as those used in cars, trucks, tractors, airplanes, vans, RV's, trolling motors, etc. This charger is not intended to supply power to a low voltage electrical system other than in an automotive application. •To reduce risk of electrical shock, unplug the charger from the outlet before attempting any maintenance or cleaning. • Use only attachments recommended or sold by manufacturer. The use of attachments not recommended by the manufacturer may result in fire, electric shock, or injury. Help us help you Remember: • Place charger as far away from battery being charged as the charger cables will permit. • Never operate charger if it has received a hard blow, been dropped, or otherwise damaged. Take it to a qualified professional for inspection and repair. • Never pull out the plug by the cord when unplugging the charger. Pulling on the cord may cause damage to the cord or the plug. • Do not operate the charger if it has a damaged power cord or plug. Have the cord replaced. • Never charge a frozen battery If battery fluid (electrolyte) becomes frozen, bring battery into a warm area to thaw before you begin charging • Never allow battery acid to drip on charger when reading specific gravity or filling battery • Never set a battery on top of the charger. • Never place charger directly above battery being charged. • Never use charger for charging dry-cell batteries that are commonly used with home appliances These batteries may burst and cause personal injury Personal Safety • Never crank engine with charger attached to battery and 120 volt line. Precautions • Remove all personal metal items from your body, such as rings, bracelets, necklaces, and watches while working with a lead-acid battery. A battery can produce a short circuit current high enough to weld a ring (or the like) to metal, causing a severe burn. • Take care not to drop any metal tool or metal object onto the battery This may spark or short circuit the battery or another electrical device that may cause an explosion. For your own personal safety, please follow the following precautions: • Wear complete eye and clothing protection when working with lead-acid batteries. • Be sure that someone is within range of your voice to come to your aid if needed while you work with or are near a lead-acid battery. • Have plenty of fresh water and soap nearby for use in case battery acid contacts your eyes, skin, or clothing. If this happens, wash immediately with soap and water. Then get medical attention. • Always operate your battery charger in an open, well ventilated area • Never smoke or allow a spark or flame in the vicinity of the battery or engine. Batteries generate explosive gases. • Neutralize any acid spills thoroughly with baking soda before attempting to clean up. • Avoid touching your eyes while working with a battery. Acid particles (corrosion) may get into your eyes. If this occurs, flush eyes immediately with running cold water for at least ten minutes Then immediately get medical attention. 2 Before Using Your Battery Charger It is important to understand your charger's requirements. requirements and how to prepare a battery for charging. Plugging This section will tell you about your charger's electrical it in Electrical Shock Hazard Be sure that the power cord fits properly into the outlet. If not, have a qualified electrician install a proper outlet. Never alter the AC cord or plug provided. Improper connection can result in electrical shock. Your charger should be grounded to reduce the risk of electrical shock. Your charger is equipped with an electrical cord that has an equipment grounding conductor and a grounding plug designed to be used on a 120 volt circuit. The cord must be connected to an outlet that has been properly installed and grounded in accordance with all local codes and ordinances. A TEMPORARY adapter may be used to connect the charger to a two-pole outlet if a properly grounded outlet is not available. Use the adapter ONLY until a properly grounded outlet can be installed by a qualified electrician. DANGER: Before using an adapter as illustrated, be certain that the center screw of the outlet plate is grounded. The green colored grounding clip ofthe adapter must be attached by a screw to a properly grounded outlet. If unsure whether outlet is properly grounded, contact a professional electrician. If necessary, replace the original outlet cover screw with a longer one that will secure the grounding clip to the outlet cover and make a ground connection to the grounded outlet. Extension cords Improper extension cords present a risk of fire or electric shock. Follow these guidelines for using an extension cord: • The pins on the charger's power cord must fit firmly into the extension cord, and the extension cord must fit firmly into the receptacle. Length of Cord, in Feet! 25 50 100 150 AWG* Size of Cord 18 18 18 16 *AWG=American • Use only 3-conductor (grounded) extension cord when necessary. • The extension cord must be properly wired and in good electrical condition. • The wire size must be large enough for its length as specified in the following chart. 3 Wire Gauge Using Your Battery Charger For best results from your battery charger, learn to use it properly. how to charge a battery in or out of the vehicle. What to expect from your This section tells how to install the charger and charger. Your charger is designed for use with 12-volt batteries only. It has a control circuit designed to stop the charging process when a battery reaches full charge. This same circuit requires that a battery have at least 1 volt of charge to start the charging process. Completely discharged batteries must be brought to this minimum state-of-charge before this charger will operate. The charger is designed to: maintain the charge level of 12-volt batteries used in seasonal or special-purpose vehicles or engines stored for long periods such as RVs, farm and construction equipment, snowmobiles and the like. • improve 12-volt battery performance during cold weather. Installing the charger Location Your charger can be mounted on a sheet-metal fender well near the battery. The charger comes with a two-piece mounting bracket, two bolts, and two nuts. Position the charger on the selected location to be sure that the leads reach the battery terminals. Mounting J Figure 1 illustrates the charger mounting brackets. Figure 2 illustrates surface mounting of the charger to the fender well. If using the nut and bolt provided, drill two holes between 3/16" and 1/4" in diameter. (For alignment of holes use one of the brackets as a template.) If the backside of the mounting surface is hard to reach, you may consider using two 1/2" sheet-metal screws instead of nut and bolt, drill a pilot hole if required, drill holes between 1/8" and 5/32". CAUTION: Do not drill or puncture battery. Electrical installations - Route and secure supply cord and output wiring away form gas line, carburetor or other hot, sharp or moving and pinch parts to avoid damage to the insulation. Secure the AC cord and plug to a cable or frame using a self locking cable tie or equivalent. 4 Figure I Figure 2 Preparing your battery to be charged It is important that you read and follow these guidelines while you are preparing to charge your battery. Make sure that you have a 12 volt lead-acid battery. Clean the battery terminals. Be careful to keep corrosion from getting in or around your eyes. • If you have a battery with removable cell caps, if required, add distilled water to each cell until the battery acid reaches the level indicated by the manufacturer. This will help purge excessive gases from the cells. Be careful not to overfill. If you have a sealed battery without cell caps, no action is necessary. Continue to the next step listed below. Charging Take time to read all battery manufacturer's specific precautions, such as removing or not removing cell caps while charging, and recommended rates of charge. Wear safety glasses. See additional "Personal Safety Precautions" on page 2. Be sure that the area around the battery is wellventilated while it is being charged. If it is necessary to remove the battery from the vehicle to charge it, always remove the grounded terminal from the battery first. A spark may be caused if all accessories in the vehicle are not completely turned off. NOTE: A marine battery installed in a boat must be removed and charged on shore. your battery Charging SOURCE WHEN CONNECTING OR DISCONNECTING CHARGER TO OR FROM I ALWAYS DISCONNECT CHARGER FROM POWER I BATTERY. Charging a battery outside the vehicle: 1. When removing battery, disconnect grounded terminal first. Be sure all accessories are turned off. 2. Check the polarity of the battery posts as indicated on the battery case: POSITIVE (POS, P, +) and NEGATIVE (NEG, N, -). NOTE: On top-post batteries, the positive battery terminal usually has a larger diameter than the negative one. 3. Connect the red (POSITIVE) charger lead to the POSITIVE post of the battery. Note: For top or side post batteries, you will need to purchase connectors at an automotive accessory outlet. a battery in the vehicle: 1. Arrange the power cord and charging leads carefully to avoid damage that could be caused by the hood, door, or moving engine parts. 2. Keep your hands, leads and power cord clear of fan blades, belts, pulleys, and other parts that can cause injury. 3. Check the polarity of the battery posts as indicated on the battery case: POSITIVE (POS, P, or +) and NEGATIVE (NEG. N or -). NOTE: The positive post on top-post batteries is usually larger than the negative post. 4. Identify which battery post is ground or connected to the chassis. THE NEGATIVE POST IS NORMALLY THE ONE THAT IS GROUNDED. 5. On a negative grounded system: Connect the red (POSITIVE) charger lead to the ungrounded POSITIVE (POS, P, +) cable connection to the battery. Then connect the black (NEGATIVE) lead to the to the grounded NEGATIVE (NEG, N, -) connection. On a positive grounded system: Connect the black (NEGATIVE) battery charger lead to the NEGATIVE (NEG, N, -) connection to the battery. Then connect the red (POSITIVE) lead to the to the grounded POSITVE (POS, P, +) connection. TOP-POST ADAPTER REQUIRED FOR CONNECTION IMPORTANT: Wear safety glasses and face away from the battery while making connections. SIDE-POST ADAPTER REQUIRED FOR CONNECTION 5 Charging indicators Red and green lights indicate charger activity. When the charger is operating, indicator lights will show current activity: ;COLOR STATE CONDITION Green Off No power supply. Green On AC power is connected. Red On Battery voltage is about 14 volts and charging has stopped. Red Off Battery voltage has dropped and charging has resumed Maintenance Check connection to power source. Check lead connectons. and care Very little maintence is needed. Keep the connections free of corrosion and accumulated soil. 6 SEARS 1.5 AMP FULLY AUTOMATIC ONBOARD BATTERY CHARGER MAINTAINER OWNER'S MANUAL Model No. 47001 Forinformation abouttroubleshooting Calltoll4reefromanywhereinthe U.S.A.or Canada 7 amto 4:30 pmCSTMondaythroughFriday 1-800-SEARS.64 (1-800-732-7764) When ordering requesting parts, the following service always provide information: • Product Type • Model Number • Part Number • Part Description 0000600547-1195 or 8EARS
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Page Count : 8 Page Layout : SinglePage Page Mode : UseNone Producer : Goby Monitor Application version 3, 2, 1, 4 Create Date : Tue Apr 03 16:22:09 2007 Author : Title : Subject :EXIF Metadata provided by EXIF.tools