SEECODE VSH411 Bluetooth Headset User Manual

Download:
Mirror Download [FCC.gov]
Document ID	529013
Application ID	OERyXbmQcF6HEEK6h2rkSw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	10.38kB (129748 bits)
Date Submitted	2005-04-06 00:00:00
Date Available	2005-04-06 00:00:00
Creation Date	2005-04-06 15:40:25
Producing Software	Acrobat Distiller 6.0 (Windows)
Document Lastmod	2005-04-06 15:40:25
Document Title	Microsoft Word - ViM User's Guide 20041229.0.93.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	Uon-Chae.Song

Bluetooth® Headset
Disclaimer
VIM
MODEL : VSH411
a User’s Guide
The headset described in this guide is approved to be
compliant with the Bluetooth® Specification and its
profiles.
is a trademark owned by Bluetooth SIG.
All brand names are the property of their respective
owners.
FCC ID RPRVSH411
* Section 15.19 Labelling requirements
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference and
(2) This device must accept any interference received,
including interference that may cause
undesired operation.
* Section 15.21 Information to user
The changes or modifications not expressly approved by
the party responsible for compliance could void the user’s
authority to operate the equipment.
SEECODE DOC VER 20041229.0.93.AIDfduj7839fduTHDOCTHOIO - 876YUIF
SEECODE DOC VER 20041229.0.93.AIDfduj7839fduTHDOCTHOIO - 876YUIF
* IMPORTANT NOTE:
To comply with the FCC RF exposure compliance
requirements, no change to the antenna or the device is
permitted. Any change to the antenna or the device could
result in the device exceeding the RF exposure requirements
and void user’s authority to operate the device.
Table of Contents
DISCLAIMER ............................................................................................. 2
I. INTRODUCTION........................................................................5
II. GETTING STARTED................................................................7
IN THE PACKAGE ....................................................................................... 7
OVERVIEW ................................................................................................ 7
CHARGING THE BATTERY .......................................................................... 8
WEARING THE HEADSET ............................................................................ 9
SWITCHING THE HEADSET ON OR OFF ......................................................... 9
TAKING THE HEADSET INTO USE FOR THE FIRST TIME ............................... 10
III. USING THE HEADSET ........................................................12
MAKING A CALL...................................................................................... 12
REDIALING THE LAST DIALED NUMBER .................................................... 12
VOICE DIALING....................................................................................... 12
ENDING A CALL ....................................................................................... 13
ANSWERING A CALL ................................................................................ 13
ADJUSTING THE EARPHONE VOLUME ....................................................... 13
TRANSFERRING THE CALL FROM THE HEADSET TO THE PHONE .................. 14
TRANSFERRING THE CALL FROM THE PHONE TO THE HEADSET .................. 14
IV. FOR ADVANCED USERS.....................................................15
HEADSET CONNECTION STATES ............................................................... 15
CONNECTING AND DISCONNECTING TWO DEVICES .................................... 17
MORE ABOUT PAIRING PROCEDURE ......................................................... 18
REMOVING ALL PAIRED INFORMATION FROM YOUR HEADSET ................... 18
V. SPECIFICATION.....................................................................20
SEECODE DOC VER 20041229.0.93.AIDfduj7839fduTHDOCTHOIO - 876YUIF
SEECODE DOC VER 20041229.0.93.AIDfduj7839fduTHDOCTHOIO - 876YUIF
adjust volume, without touching your mobile device.
I. Introduction
The VSH411 headset is a wireless headset based on
Bluetooth® technology.
Bluetooth® technology is a standard for short range
radio communications. Your Bluetooth® phone and
headset do not need to be in a line of sight. The two
devices only need to be within a maximum of 10 meters
of each other, although the connection can be subject to
interference from obstacles, such as walls, or from other
electronic devices.
The VSH411 is a Bluetooth® headset that supports two
profiles: The Headset and the Hands-Free profile. It can
be used with any compatible Bluetooth devices, such as
mobile phones, PDAs, that support the Headset or
Hands-Free profile. (Here, "Profile" means a set of
Bluetooth commands that a Bluetooth device uses for
controlling another Bluetooth devices.)
Your VSH411 will allow you to receive, make a call,
SEECODE DOC VER 20041229.0.93.AIDfduj7839fduTHDOCTHOIO - 876YUIF
SEECODE DOC VER 20041229.0.93.AIDfduj7839fduTHDOCTHOIO - 876YUIF
Earphone
II. Getting started
Volume down button
Charger connector
In the package
Ear hook
Microphone
The VSH411 Bluetooth® headset package contains :
Volume up button
the headset,
Talk / Power button and the LED indicator
a charging cable,
two changeable upper deco housings in different colors
and this manual.
Charging the battery
To charge the battery, simply connect the charger cable
Overview
to the headset. And then, connect the charger to an AC
wall outlet.
While charging, the LED indicator light is shown.
When the battery gets to a significantly low level, it starts
to beep a low-battery tone periodically. Eventually the
headset is turned off unless you charge the battery.
Notice : Right after you bought the headset, the battery
charge would be low. Before using the headset for the first
time, it is recommended for you to charge the battery.
SEECODE DOC VER 20041229.0.93.AIDfduj7839fduTHDOCTHOIO - 876YUIF
SEECODE DOC VER 20041229.0.93.AIDfduj7839fduTHDOCTHOIO - 876YUIF
To switch on : press and hold the talk/power button for
2 or 3 seconds. The headset plays its booting melody
and the green indicator light starts blinking
Wearing the headset
Notice : If battery level is too low to power on when you
You can put on the VSH411 Bluetooth® headset on
either ear.
switched the headset on, it plays four tones in a row and
will not be switched on. You should charge the headset
and then, you can switch it on.
To change the orientation of the earhook, detach the
To switch off : Press and hold the talk/power button for
earhook from the body part. To detach it, hold the
5 seconds. The headset plays and the indicator light
headset firmly and pull the earhook away from the post
gone.
around the earphone. Turn it over and replace on that
post.
To wear the headset, extend the earhook, then slide it
Taking the headset into use for the first time
over the top of your ear. Put the earphone bumper
gently into your ear hole. Adjust your headset to your ear
Before you use Bluetooth® devices, both devices you are
carefully so that you feel comfortable.
going to use should have datas such as Bluetooth®
address, pass code. In other words, you must register
devices to each other. This process is called pairing.
Once you have paired two devices, you don't need to do
Switching the headset on and off
this again until you want to use the headset with another
device.
SEECODE DOC VER 20041229.0.93.AIDfduj7839fduTHDOCTHOIO - 876YUIF
SEECODE DOC VER 20041229.0.93.AIDfduj7839fduTHDOCTHOIO - 876YUIF
III. Using the headset
Switch on the headset
Press the
volume up and volume down buttons
Making a call
simultaneously.
Make a call using your mobile phone.
You can hear the headset plays its pairing tone. The
The voice is transferred to the headset by pressing on
LED indicator light blinks rapidly. Now, the headset is in
the talk button of your headset.
the discoverable mode (This mode is also referred to as
"pair-able" or "pairing" mode)
Redialing the last dialed number
Make sure that your phone is switched on.
While there is no active call, press the talk button briefly.
Enter your phone's Bluetooth menu and make sure that
the Bluetooth feature is activated (Please refer to your
phone's user guide).
Start to search for Bluetooth devices with your phone
(Please refer to your phone's user guide).
Voice Dialing
Check if your phone supports this function.
Voice tags must have been recorded in your phone.
The phone searches for all Bluetooth devices within
about 10 meters and displays them as a list.
When no call is in progress, press and hold the talk
button for about one second until you hear the second
Select the VIM headset from the list.
Enter the passkey of 0000 to associate("pair") and
beep (the first beep is played as soon as you press on
the talk button).
connect the phone to your headset.
Congraturations! The VSH411 Bluetooth® headset is
now ready to use with your mobile device.
SEECODE DOC VER 20041229.0.93.AIDfduj7839fduTHDOCTHOIO - 876YUIF
Your phone's voice dialing function will be activated. You
may hear some beeps which is played by your mobile
SEECODE DOC VER 20041229.0.93.AIDfduj7839fduTHDOCTHOIO - 876YUIF
phone through the earphone of the headset. Say the
desired name(voice tag) to the headset's microphone.
Transferring the call from the headset to the
The device will dial the number associated with the voice
phone
tag.
Please refer to your mobile's user manual.
Ending a call
Transferring the call from the phone to the
To end a call, press the Talk button while there is an
headset
ongoing call.
While an ongoing call is in progress with your phone,
press the talk button on your headset.
Be careful, pressing the talk button could end the call
Answering a call
unless the call is on your mobile's side.
Once you hear an incoming call ring in the headset,
press on the talk button shortly.
Adjusting the earphone volume
Press the volume up or volume down button to
increase or decrease the volume, respectively. A beep
will be generated for each step.
Please note that this adjusts only the headset's earphone
volume level, not the mobile phone's volume level.
SEECODE DOC VER 20041229.0.93.AIDfduj7839fduTHDOCTHOIO - 876YUIF
SEECODE DOC VER 20041229.0.93.AIDfduj7839fduTHDOCTHOIO - 876YUIF
IV. For advanced users
which is a voice channel, is established. The phone's
audio is redirected to your headset through the voice
Headset connection states
channel("SCO" channel of the Bluetooth).
There is several states in the headset in accordance
with its connection status to the phone.
The
LED
indicating
light
reflects
the
headset's
connection state.
In the "waiting" state, any paired device can connect to
the headset. In this state, you can use "redial the last
number" and "transfer the call to your headset" function
with your headset.
waiting /
connected
on
on
off
pairable
The "connected" state. This means the two devices are
voice connected
(SCO connected)
connected using the Bluetooth wireless technology. You
on
on
off
can hear the ring tone, you can answer the call, you can
make a call, voice dial. You can use full functions of the
headset in this state. Basically, the headset functions
were made up asuming that the headset is in this state.
The "pairable" state. With your mobile phone, you can
search the VSH411 headset, pair with it.
The "voice connected" state is also called "SCO
connected". This means an additional connection,
SEECODE DOC VER 20041229.0.93.AIDfduj7839fduTHDOCTHOIO - 876YUIF
The first timing diagram is about both waiting and
connected state. In this state, the LED will flash once
every five seconds.
The second diagram, the pairable state. The LED will
blink rapidly.
The last one, the voice connected state, the LED will
flash twice every three seconds as depicted in the figure.
SEECODE DOC VER 20041229.0.93.AIDfduj7839fduTHDOCTHOIO - 876YUIF
More about pairing procedure
Before the headset can be used with your phone, the
Connecting and disconnecting two devices
phone has to be paired with the headset. The headset
First, connecting. This can be done by using the
can be paired with up to 3 phones. It can be connected
respective function in your phone. Also, the headset can
to only one phone at a time, however.
connect to its "default device" by pressing the talk button.
But please keep this in your mind : in the latter case, the
The phone which is last paired with the headset or
headset will try to redial the last dialed number after the
connected to the headset is called the "default device".
connection is established.
The headset acts as if it knows only one phone, the
So, it is strongly recommended that you should initiate
default device. So, user actions such as pressing on the
the connection with your phone.
button makes the headset connect to the default device.
Now to the disconnecting method. You can simply switch
To change the default device, you can pair the
off the headset. You can also disconnect the headset in
headset with another phone you want to make the
your phone's menu. Of course, taking the headset out of
default device. If the phone has already been paired with
phone's Bluetooth radiation range, 10 meters, can
the headset, you simply need to connect to the headset
disconnect the Bluetooth link.
from the phone. That will change the default device.
You can also get the headset to enter the pairable mode.
Then the Bluetooth connection is closed and the
headset entering the pairable mode.
Removing all paired information from your
headset
Push the volume up and volume down button
SEECODE DOC VER 20041229.0.93.AIDfduj7839fduTHDOCTHOIO - 876YUIF
SEECODE DOC VER 20041229.0.93.AIDfduj7839fduTHDOCTHOIO - 876YUIF
simultaneously while the headset is in its pairable mode.
V. Specification
This will erase all the information about paired devices.
You need to pair the headset with your phones again to
use it with your mobiles.
SEECODE DOC VER 20041229.0.93.AIDfduj7839fduTHDOCTHOIO - 876YUIF
item
value
Operating Temperature
0 ~ 60
Storage Temperature
-20 ~ 80
Power Consumption
Max 42mA
Operating Voltage
3.5Vdc ~ 4.2Vdc, 3.7Vdc normal
Standby Time
200 hours
Talking Time
3.3 hours
Carrier Frequency
2402MHz to 2480MHz(USA, Europe)
Modulation Method
GFSK, 1Mbps, 0.5BT Gaussian
Transmission Power
Typical 1.0 dBm
Frequency Hopping
1600hops/sec, 1MHz channel space
Bluetooth Core Spec
1.1
Supporte Bluetooth Profile
Headset, Handsfree
SEECODE DOC VER 20041229.0.93.AIDfduj7839fduTHDOCTHOIO - 876YUIF

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 10
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:204d86b8-8805-4b4f-8e53-91ebef4f5c8c
Producer                        : Acrobat Distiller 6.0 (Windows)
Create Date                     : 2005:04:06 15:40:25+09:00
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2005:04:06 15:40:25+09:00
Document ID                     : uuid:974cea06-a166-47ce-81b6-c3db31f60a79
Format                          : application/pdf
Title                           : Microsoft Word - ViM User's Guide 20041229.0.93.doc
Creator                         : Uon-Chae.Song
Author                          : Uon-Chae.Song

EXIF Metadata provided by EXIF.tools