SEGI JR702F433 Remote User Manual US Nu 4500R 08 09 1

SEGI LIMITED Remote US Nu 4500R 08 09 1

User manual

a@@@@HIa@@@@HInuTUPPrStatement : The term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were met. Caution : The User that modifications to the unit may void the user's authority to operate the unit. (1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may cause undesired operation. Statement : The term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were met. Caution : The User that modifications to the unit may void the user's authority to operate the unit. (1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may cause undesired operation. Statement : The term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were met. Caution : The User that modifications to the unit may void the user's authority to operate the unit. (1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may cause undesired operation. Statement : The term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were met. Caution : The User that modifications to the unit may void the user's authority to operate the unit. (1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may cause undesired operation. Statement : The term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were met. Caution : The User that modifications to the unit may void the user's authority to operate the unit. (1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may cause undesired operation. Statement : The term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were met. Caution : The User that modifications to the unit may void the user's authority to operate the unit. (1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may cause undesired operation. Statement : The term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were met. Caution : The User that modifications to the unit may void the user's authority to operate the unit. (1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may cause undesired operation. Statement : The term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were met. Caution : The User that modifications to the unit may void the user's authority to operate the unit. (1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may cause undesired operation. Statement : The term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were met. Caution : The User that modifications to the unit may void the user's authority to operate the unit. (1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may cause undesired operation. Statement : The term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were met. Caution : The User that modifications to the unit may void the user's authority to operate the unit. (1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may cause undesired operation. Statement : The term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were met. Caution : The User that modifications to the unit may void the user's authority to operate the unit. (1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may cause undesired operation. Statement : The term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were met. Caution : The User that modifications to the unit may void the user's authority to operate the unit. (1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may cause undesired operation. Statement : The term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were met. Caution : The User that modifications to the unit may void the user's authority to operate the unit. (1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may cause undesired operation. Statement : The term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were met. Caution : The User that modifications to the unit may void the user's authority to operate the unit. (1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may cause undesired operation. Statement : The term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were met. Caution : The User that modifications to the unit may void the user's authority to operate the unit. (1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may cause undesired operation. Statement : The term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were met. Caution : The User that modifications to the unit may void the user's authority to operate the unit. (1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may cause undesired operation. Statement : The term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were met. Caution : The User that modifications to the unit may void the user's authority to operate the unit. (1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may cause undesired operation. Statement : The term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were met. Caution : The User that modifications to the unit may void the user's authority to operate the unit. (1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may cause undesired operation. Statement : The term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were met. Caution : The User that modifications to the unit may void the user's authority to operate the unit. (1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may cause undesired operation. Statement : The term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were met. Caution : The User that modifications to the unit may void the user's authority to operate the unit. (1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may cause undesired operation. Statement : The term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were met. Caution : The User that modifications to the unit may void the user's authority to operate the unit. (1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may cause undesired operation. Statement : The term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were met. Caution : The User that modifications to the unit may void the user's authority to operate the unit. (1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may cause undesired operation. Statement : The term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were met. Caution : The User that modifications to the unit may void the user's authority to operate the unit. (1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may cause undesired operation. Statement : The term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were met. Caution : The User that modifications to the unit may void the user's authority to operate the unit. (1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may cause undesired operation. Statement : The term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were met. Caution : The User that modifications to the unit may void the user's authority to operate the unit. (1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may cause undesired operation. Statement : The term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were met. Caution : The User that modifications to the unit may void the user's authority to operate the unit. (1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may cause undesired operation. Statement : The term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were met. Caution : The User that modifications to the unit may void the user's authority to operate the unit. (1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may cause undesired operation. Statement : The term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were met. Caution : The User that modifications to the unit may void the user's authority to operate the unit. (1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may cause undesired operation. Statement : The term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were met. Caution : The User that modifications to the unit may void the user's authority to operate the unit. (1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may cause undesired operation. Statement : The term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were met. Caution : The User that modifications to the unit may void the user's authority to operate the unit. (1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may cause undesired operation. Statement : The term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were met. Caution : The User that modifications to the unit may void the user's authority to operate the unit. (1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may cause undesired operation. Statement : The term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were met. Caution : The User that modifications to the unit may void the user's authority to operate the unit. (1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may cause undesired operation. Statement : The term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were met. Caution : The User that modifications to the unit may void the user's authority to operate the unit. (1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may cause undesired operation. Statement : The term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were met. Caution : The User that modifications to the unit may void the user's authority to operate the unit. (1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may cause undesired operation. Statement : The term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were met. Caution : The User that modifications to the unit may void the user's authority to operate the unit. (1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may cause undesired operation. Statement : The term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were met. Caution : The User that modifications to the unit may void the user's authority to operate the unit. (1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may cause undesired operation. www.nustart.cawww.firstechllc.comToll Free : 888-820-369021911 68th Ave SKent, WA 98032XQPRrecanPPQPPPBy Firstech LLC Version 1.0FCC ID : VA5JR702F433 / IC ID : 7087A-R702F433Statement : The term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were met. Caution : The User that modifications to the unit may void the user's authority to operate the unit. (1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may cause undesired operation.
By Firstech, LLC 2 t@o@cSafety Information 3Remote-Pager : Nu4500R/LCD 4NUSTARTGLO color LCD (Liquid Crystal Display) 4Remote-Pager Button Functions 7Remote-Pager Learn Routine 8Alarm Mode 9Dual Stage Shock Sensor 10Auto-start Function 11Reservation Mode 12Canceling Reservation Mode 13Trunk Release 14Query Function 14Panic Mode 14Valet Mode 15Timer Start Mode 15Safety Shutdown Features 16RPS (Remote Paging System) 16Optional Programmable Features 17Ignition Lock 17Auto Arming 17Passive Arming 18Turbo Mode 182nd Car Mode 18Optional Installation Features 19Cold Start Mode 19Optional Auxiliary 1 & Auxiliary 2.19Limited Lifetime Consumer Warranty 20By Firstech, LLC 2 3 By Firstech, LLC Safely lnformationPlease take these safety precautions under the following conditions: 1. Servicing the vehicleWhen servicing (i.e. changing the oil, washing your car) your automobile, the NUSTART system should be in Valet Mode.There is a safety shutdown switch under the hood that deactivates the remote starter function if the hood is open. However,if the switch has been damaged or the switch has been installed improperly, the vehicle may start when Button IIis pressedfor 2 seconds even if the hood is open. 2. Loaning your vehicle to othersWhenever you loan your vehicle to an individual who is not familiar with NUSTART, please put the vehicle in Valet mode.This will prevent the vehicle loaner from accidentally activating the NUSTART auto-security system. 3. For manual transmission vehiclesIf the NUSTART Nu4000R, Nu4000R-2nd is installed in a manual transmission vehicle, extra precautions are requiredbecause the NUSTART does not monitor the gear shift :Under normal circumstances, Reservation Mode is cancelled when a door or hatchback opens. Please verify if theopening of any door or hatchback cancels Reservation Mode. If any of the doors or hatchback is not monitored byNUSTART because of improper installation or a faulty dome light switch, do not use the NUSTART and take your vehicle to the dealerimmediately for repair. Do not set Reservation Mode when the window(s) are open or if there is anyone inside of the vehicle includinganimals. Important!
5 By Firstech, LLC By Firstech, LLC 4Remote-Pager : Nu4500 / LCD The remote-pager comes with NUSTARTGLO which is a unique color LCD display that visually tells the vehicle owner the security statusof your car at all times. There are differing icons that will appear on your NUSTATGLO LCD indicating what your vehicle is currentlydoing. The model name, Nu4500R is a Two Way Frequency Modulation Remote with Liquid Crystal Display. This transmitter thatallows you to activate multiple functions by pressing a combination of 4 buttons on the unit in order to transmit signals.NUSTARTGLO color LCD Icon ExplanationIndicates that the Auto Arm/ Disarm Mode is on.Indicates that Turbo Mode is on. Indicates that 2nd Vehicle Mode is on.Indicates that Timer Start Mode is on.Indicates that Passive Arming Mode is on.Indicates that the first or second stage of the shock sensor has been triggeredIndicates that you are in Valet Mode.Indicates that your parking lights are flashing.Indicates that your siren is turned on for locking or unlocking the vehicle.Indicates that someone is paging you from your vehicle.Indicates if your car is armed or disarmed.Indicates if your remote-pager is transmitting signals to the controller unit.AutoTurbo2ndTimerPassive
7 By Firstech, LLC By Firstech, LLC 6 Remote-Pager Button FunctionsIcon ExplanationDisplays remaining battery life.Displays run time left - each bar represents 25% of the running time. Indicates that your door is open.Indicates if your vehicle has auto-started properly or ignition on.Indicates that your trunk is open.Button(s) Duration Function1௖1/2 secAlarm Mode - on/off, RPS - on/off, Siren Off, Starter Kill (Anti-Grind) -on/off2ௗ1/2 secAuxiliary Option 13௘1/2 secAuxiliary Option 24௙1/2 secQuery Function 5௖M2 secAuto Lock - on/off6ௗM2 secAuto-start Function - on/off7௘M2 secTrunk Release8௙M2 secPanic, Press௖to shut off Siren. 9H௖KௗI1/2 secSiren Chirps for Lock/Unlock-on/off10H௖K௘I1/2 secValet Mode - on/off11HௗK௘I1/2 secPassive Arming - on/off12HௗK௙I1/2 secTimer Start Mode - on/off13H௘K௙I1/2 secTurbo Mode - on/off14H௖K௘IM2 secShock Sensor - on/off 15H௖KௗIM2 secProgramming Menu 1 - Installer Only16H௖K௙IM2 secProgramming Menu 2 - Installer OnlyNote : ""Represents pressing the button for 2 seconds."()"Represents simultaneously pressing the buttons."() "Represents simultaneously pressing the buttons for 2 seconds.
9 By Firstech, LLC By Firstech, LLC 8Remote-Pager Learn RoutineIf you replace or add additional remotes, you can program up to three remotes, please perform the following procedure:Step1 : Activate Valet/Programming mode by manually turning the ignition on and off five times (between Acc and On) with car key within a 10 secondperiod. The parking light will flash once with successful completion of this step.Step2 : Within a 10 second period after cycling the ignition for the 5th time, press button I. The car parking lights will flash once to confirm that the transmitter has been programmed. Continue program the additional remotes. The parking lights will flash two times whenthe programming mode is expired.Alarm ModeYou can arm or disarm alarm mode by pressing Button I for a 1/2 second. Press Buttons (I+II) for a 1/2second to make your car sirenmute when arming or disarming your vehicle. Keep in mind that your car siren will still activate for all other modes (i.e. panic, alarm,shock sensor) regardless of whether or not your car siren is in mute mode. The car siren will be mute only when arming or disarmingyour vehicle. In alarm mode, the starter kill function (this maybe an optional feature provided by your installer) is activated.This feature disengages the starter mechanism on your car that prevents you from starting your car even with a manual key when yourvehicle s alarm mode is activated.Note : If you lose your remote after you have armed the vehicle, use your key to open the vehicle. The siren will go off. Turn on and offignition 5 times with your key to shut off the siren and turn the system into valet mode. Cancel the valet mode with remote later. See Valetmode.Note : (Siren duration is 30 to 60 sec depending on the options set at the time of initial installation.)
11 By Firstech, LLC By Firstech, LLC 10 Dual Stage Shock Sensor Press Buttons (I+III) for 2 seconds to activate or deactivate the dual stage shock sensor. The dual stage shock sensor will activate in 30seconds after the CompuStar alarm mode is armed. When the dual shock sensor is engaged, the remote-pagersecurity alerts will be triggered by the following:૆Light impact to your vehicle will activate the first stage shock sensor and the car siren will chirp 4 times in addition to the parking lights flashing 4 times.The remote pager unit will beep and the hammer icon shows up a couple of times૆Heavy impact to your vehicle will activate the second stage shock sensor and the car siren will chirp for 30 to 60 seconds and the parking lights willflash for 30 to 60 seconds. The remote-pager will be notified audibly and a hammer icon will blink in the CompuGLO LCD. Press Button I for a 1/2second to turn off the second stage shock sensor sirens and flashing lights.Auto-Start Function Press Button II for 2 seconds to auto-start an automatic transmission engine. Remember that a manual key in the ignition is required todrive the car. In addition, the anti-grind circuit (this maybe an optional feature provided by your installer) prevents you from re-crankingthe starter on a remote-started vehicle.Press Button II for 2 seconds in order to turn off an auto-started car. For manual transmission vehicles, please use reservation mode.The engine will run 15 or 25 minutes (25 or 40 min for diesel) depending on preset options at the time of installation and then shut off.If your remote-pager has a problem starting the vehicle, NUSTART will try 2 additional times. If the engine does not start after the thirdattempt, please call your authorized NUSTART dealer.Flashing Battery icon during remote start. The battery icon flashes while engine running . Each of the 4 bars of the batteryindicates 25% of the remaining engine running time. Continuation Mode:(Automatic transmission only)While your vehicle is running with your key, if you press button II for 2 seconds, you are now in the continuation mode. Your engine willcontinue running for the preset time even if you take your key from the ignition. This is for your quick stop at, for example, a grocery store.Diagnosing problems with Auto-Start If there is a problem in auto-starting your car, you will hear three chirps when you attempt to auto-start the car. Wait for 2 seconds andthe cause for the error will be indicated by the number of times parking lights flash.1Engine On2Key On3Door Open4Trunk Open5Brake On 6Hood Open7Reservation Off (Manual Transmission Only)Error Number (# of times parking lights flash) Error Reason
13 By Firstech, LLC By Firstech, LLC 12Reservation Mode Canceling Reservation ModeIn order to auto-start your manual transmission car, you must first set the NUSTART system to Reservation Mode before leaving yourvehicle. The purpose of Reservation Mode is to leave the transmission gear in the neutral position when you leave your vehicle. Reservationmode is intended for use in MANUAL TRANSMISSIONS ONLY and NOT FOR AUTOMATIC TRANSMISSIONS.Reservation Mode must be engaged each and every time you leave your manual transmission car in order to auto-start the vehicle.If you do not want to set reservation mode, shut off the engine before you exit the vehicle. The engine will shut off for the following reasons: ႫYou did not activate the parking brake or press the foot brake when you turned the manual key to the off position. ႫYou released the parking brake while the engine was running. ႫYou entered Valet Mode after the Reservation Mode has been completed. Error MessagesIf there is a problem in auto-starting your car, you will hear three chirps when you attempt to auto-start the car. Wait for 2 seconds and thecause for the error will be indicated by the number of times parking lights flash.Note : The system is not recommended for vehicles with removable tops.Important Requirements to activate Reservation ModeႫThe transmission must be in the NEUTRAL position. ႫThe vehicle windows must be rolled up. ႫDo not set the reservation mode with people in the vehicle. ႫDo not auto-start the car with people in the vehicle. Activating Reservation Mode (Manual Transmission only)Step1 : After arriving at your destination, and BEFORE TURNING YOUR ENGINE OFF, place the transmission in the Neutral position.Step2 : Activate the parking brake.Step3 : Remove your foot from the foot brake.Step4 : Remove the key from the ignition. The engine will remain running.Step5 : Exit the vehicle and close the door within two minutes after activating the parking brake. The engine will shut off and reservation mode for the remote starter is now complete.Your vehicle is now ready for auto-starting. However, the reservation mode will be cancelled if the door is opened or the NUSTART system isput in Valet mode after the reservation has been set. Once cancelled, you will have to start the vehicle with the manual key and repeat theabove 5 steps if you want to restore reservation mode. Important! If you try to auto-start the vehicle when reservation mode has not been set or turned on, the auto-start feature will not work.When you press the auto-start button, the remote beeps three times, the car parking lights will flash three times and the siren chirps threetimes. A couple of seconds later, the cause for the error will be indicated by the number of times parking lights flash. See Page 11 for error messages.(manual transmission only)1Engine On2Key On3Door Open4Trunk Open5Brake On 6Hood Open7Reservation Off (Manual Transmission Only)Error Number (# of times parking lights flash) Error Reason
15 By Firstech, LLC By Firstech, LLC 14 Trunk ReleaseQuery FunctionValet ModePress Button III for 2 seconds in order to unlock and release your trunk door. Note that the trunk release function will not only release thetrunk but will unlock all the doors as well. The only feature operating in valet mode is the keyless entry function and optional auxiliary functions. Valet Mode is very useful whenloaning your vehicle or having it serviced.In order to enter Valet mode, press Buttons (I+III) simultaneously for a 1/2 second while the ignition is on. In order to manually enter ValetMode, insert your car key into the ignition and turn the ignition on and off (between ACC and ON) five times within 10 seconds.You can exit Valet Mode only by pressing Buttons (I+III) simultaneously for a 1/2 second. Timer Start ModeIn Timer Start Mode, your car automatically starts every 1.5 or 3.0 hours depending on preset options during the time of installation for a 24-hour period. This mode is deleted automatically after 24 hours or once you start your car with either your manual key or remote-pager. Inorder to enter Timer Start Mode, press Buttons (II+IV) simultaneously for a 1/2 second.Also, note that Timer Start Mode becomes Cold Start Mode once an optional temperature sensor is installed. Timer Start Mode should be used only in open areas. Never start and run the vehicle in an enclosed space such as agarage or carport. Query Function allows the owner to visually monitor the status of your car by looking at the remote-pager NUSTARTGLO LCD icons. PressButton IV for a 1/2 second to activate the Query Function.Panic ModePress Button IV for 2 seconds to enter Panic Mode. In this mode, the car will arm if not armed already and the siren will activate and theparking lights will flash. In order to disengage Panic Mode, press Button I for 1/2 second. Then, press Button I for a 1/2 second tounlock/disarm your vehicle.If Anti-Jacking option has been programmed (ask your dealer if you like to have this option) and the Ignition-Kill has been installed , thePanic Mode works as Anti-Jacking if the car key in the ignition. In Anti-Jacking mode is activated while key is in the ignition,a)Siren will go off for 1.5 minutes, and b) Ignition-Kill will be activated after the first 30 seconds. That is to give warning to the hijacker forthe first 30 seconds and then to disconnect the ignition to stop the vehicleImportant!
17 By Firstech, LLC By Firstech, LLC 16Safety shut Down FeaturesNUSTART Nu4500R system has several shut down safety features. The following actions will shut down the engine or prevent the car fromauto-starting: Opening of the car engine hood, Pressing of the brake or Valet mode is turned on.lgnition LockThis programmable option enables your vehicle to automatically lock the doors upon pressing the brake pedal and releasing the E-brake afterthe vehicle has been started with a key. In addition, the vehicle will automatically unlock the doors upon pulling the key out from the ignition. This option must be chosen at the time of installation.Auto ArmingYou can turn this function on or off by pressing Button I for 2 seconds.When set to Auto arming, your security system will arm automatically after all the car doors are closed, your remote is away from the vehicleby more than 50 to 100 ft and 15 seconds have passed since the last Auto Disarm . Your system will disarm automatically if your remote comeswithin 50 to 100 ft radius from the vehicle. You have an option for Auto Arming without Auto Lock by option programming. Consult yourinstaller for this programming. Please read the next paragraph for the interaction between Auto Arming and Passive Arming.RPS (Remote Paging System)The optional RPS is a feature that allows an individual to page the owner of a vehicle by simply tapping on the front windshield of the car.RPS is automatically turned on upon activating alarm mode (pressing Button I for a 1/2 second) on the NUSTART Nu4500RThe RPS module can be activated by tapping a manual key producing a high-frequency vibration. This high-frequency vibration is detectedand your remote-pager will beep and a telephone icon will appear on the NUSTARTGLO LCD indicating that someone is paging you fromyour vehicle. Press Button I, II, III or IV for a 1/2 second to deactivate the RPS visual and audible paging alerts.OPTIONAL PROGRAMMABLE FEATURESThese additional programmable features can be programmed to the NUSTART system by your authorized NUSTART dealer.
19 By Firstech, LLC By Firstech, LLC 18 Passive ArmingYou can turn this function on or off by pressing Buttons (II+III) for a 1/2 second. When set to passive arming, your security system will armautomatically 30 seconds after all the car doors are closed. There are two types of passive arming that can be programmed by yourNUSTART dealership: (1) passive arming with passive lock and (2) passive arming with active lock. Passive locking means the door will lockwhen the system passively arms. In the default factory setting, the system is armed and locked actively, which means the system will onlyarm/lock when the remote-pager is utilized.Note: 1. If you select both Auto Arming and Passive Arming, Auto Arming takes priority over Passive Arming.Turbo ModeIf this optional Turbo Mode has been programmed at the time of installation, you can turn this feature on and off by pressing Buttons (III+IV) for a 1/2 second. Under this mode, engine continues running for 2 minutesafter key has been taken out from the ignition if emergency brake was on when the key is taken out. To utilize this mode, the emergency brake sensing wire has to be connected to the emergency brake wire of the vehicle. Consult theauthorized dealer for this mode. 2nd Car ModeThe Remote-Pager is able to operate 2nd vehicle. Press buttons III&IV simultaneously for 1/2 second. If this mode is turned to 2nd Car, the Remote-Pager will not communicate with the 1stvehicle. To Exit 2nd Car press button III&IV simultaneously again. (Consult your Authorized Dealer)Cold Start ModeIf the optional temperature sensor has been installed, Timer Start Mode becomes Cold Start Mode, Under this mode, your car automaticallystarts if the temperature of the inside of the vehicle goes below the preset temperature. The minimum interval between the starts will be 1.5 or 3.0 hours depending on preset options during the time of installation. Cold StartMode is activated or deactivated by pressing Buttons (II+IV) for a 1/2 second.OPTIONAL INSTALLATION FEATURES The NUSTART Nu4500R remote-pager has additional features and expansion possibilities that require additional parts and labor.
21 By Firstech, LLC By Firstech, LLC 20Garantie limitée à vieYour warrantyStaub Electronics, Ltd. Warrants to the original purchaser that this product shall be free of defects in material and workmanship under normaluse and circumstances for the period of time that the original owner of this product owns the vehicle in which it is installed ; except that the remote controller unit for the period of one year from the date of installation to the original owner of this product. When the original purchaser returns the product to the retail store where it was purchased or prepaid postal to Staub Electronics, Ltd., #160 -11791 Hammersmith Way, Richmond, BC V7A 5C6 Staub Electronics, Ltd. will at its option repair or replace such.TO THE MAXIMUM EXTENT ALLOWED BY LAW, ANY AND ALL WARRANTIES ARE EXCLUDED BY THE MANUFACTURER AND EACHENTITY PARTICIPATING IN THE STREAM OF COMMERCE THEREWITH. THIS EXCLUSION INCLUDES BUT IS NOT LIMITED TO,THE EXCLUSION OF ANY AND ALL WARRANTY OF MERCHANTABILITY AND/OR ANY AND ALL WARRANTY OF FITNESS FOR APARTICULAR PURPOSE AND/OR ANY AND ALL WARRANTY OF NON-INFRINGEMENT OR PATENTS, IN THE UNITED STATES OFAMERICA AND/OR ABROAD. NEITHER THE MANUFACTURER OF ANY ENTITIES CONNECTED THEREWITH SHALL BE RESPONSIBLE OR LIABLE FOR ANYDAMAGES WHATSOEVER, INCLUDING BUT NOT LIMITED TO, ANY CONSEQUENTIAL DAMAGES, INCIDENTAL DAMAGES,DAMAGES FOR LOSS OF TIME, LOSS OF EARNINGS, COMMERCIAL LOSS, LOSS OF ECONOMIC OPPORTUNITY AND THE LIKE.NOTWITHSTANDING THE ABOVE, MANUFACTURER DOES OFFER A LIMITED WARRANTY TO REPLACE OR REPAIR THE CONTROLMODULE AS DESCRIBED ABOVE. Some states do not allow limitations on how long an implied warranty will last or the exclusion or limitation on how long an implied warrantywill last or the exclusion or limitation of incidental or consequential damages. This warranty gives you specific legal rights, and you may also have other rights, which vary State to State.Staub Electronics, Ltd. is not RESPONSIBLE OR LIABLE FOR ANY DAMAGES WHATSOEVER,INCLUDING BUT NOT LIMITED TO, ANYCONSEQUENTIAL DAMAGES, INCIDENTAL DAMAGES, DAMAGES FOR LOSS OF TIME, LOSS OF EARNINGS, COMMERCIAL LOSS,LOSS OF ECONOMIC OPPORTUNITY AND THE LIKE that may or may not resulted from the operation of NUSTART. NOT WITH STANDING THE ABOVE, MANUFACTURER DOES OFFER A LIMITED WARRANTY TO REPLACE OR REPAIRTHE CONTROL MODULE AS DESCRIBED ABOVE. The product’s warranty is automatically void if its date code or serial number is defaced, missing, or altered. This warranty will not be valid unless youhave completed the registration card and mailed it to Staub Electronics, Ltd., within 10 days after the purchase to the address listed on the registrationcard.
23 By Firstech, LLC By Firstech, LLC 22Notes Notes

Navigation menu