SEI Robotics B06A BT RCU User Manual User Guide

Download:
Mirror Download [FCC.gov]
Document ID	3801561
Application ID	llnRS2mMHznqtLAt+bT0Iw==
Document Description	User_Guide
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	42.64kB (533034 bits)
Date Submitted	2018-03-30 00:00:00
Date Available	2018-03-30 00:00:00
Creation Date	2018-03-29 15:46:20
Producing Software	Adobe Acrobat Pro DC 15.8.20082
Document Lastmod	2018-03-29 15:46:20
Document Title	User_Guide
Document Creator	Adobe Acrobat Pro DC 15.8.20082
Document Author:	Shawn Cheung

Remote control physical function requirements description
1. Remote control key
System Code: 0x06FE Code Format: NEC
Usage Page
Usage ID
Power
0x07
0x0066
Back
0x0C
0x0224
Home
0x0C
0x0223
Voice search
0x0C
0x0221
Center（select）
0x0C
0x0041
Up
0x0C
0x0042
Down
0x0C
0x0043
Left
0x0C
0x0044
Right
0x0C
0x0045
Voice+
0x0C
0x00E9
Voice0x0C
0x00EA
Menu
0x07
0x0076
IR CODE
0x00
Remote control operating instructions
1. Remote control special requirements
1) When connected to Bluetooth, the remote control sends the Bluetooth key
value; if Bluetooth is not connected, it sends the infrared key value.
(Only standby button infrared)
2) indicator: red, each time you press the button, the indicator light flashes
Low Voltage Reminder: When the power is low, the indicator light flashes rapidly.
As long as the indicator is still operating, it will stay blinking. When the remote
controller is no longer operating, it flashes 5 times or flashes for 3 seconds,
then stops and goes out.
3) Support Bluetooth remote control online upgrade, and can be triggered by
the HOST side upgrade.
4) Pairing method: Press and hold the "OK" + "BACK" button at the same time
for 3 seconds, the indicator light flashes, and the pairing success indicator light
turns off for 3 seconds.
Connection interval <12ms
5) Remote control distance: ≥10m
6) Bluetooth device name: B06A
2, remote control other requirements
1) Pairing requirements: No Bluetooth devices can not be scanned or can not
be paired (including continuous pairing keys in a short period of time), please
verify 50 times to ensure no problems;
2) back to the functional requirements: there should be no back to back the
problem, including the box back to the power, the remote power-off back to
connect, put it aside for 2 hours and so on, please verify 50 times to ensure that
no problem;
3) anti-jamming function requirements: There should be no problems that affect
the throughput of the host WIFI very much, please make sure that the host-side
WIFI throughput is normal when the remote controller is connected;
4) Performance requirements: Requirements support ≤ 10m, there must be no
voice call Caton, lost and the remote control button Caton, lost code or even
key problems;
5) Power Requirements: The remote control can last for at least 6 months
6) Voice: 16Khz voice sample with 16-bit sampling, long press voice key to
enter voice search, release to exit.
Hardware requirements
NO.
Item
Numberofkeys
Specifications
Size
150*39*19mm
12
Button
free ≤2mm
height
≥0.5mm
After the role
of key height
Button force
160g±30gf
Shell
plastic ABS
material
PCB
FR-4
Rubber
Silicone raw materials must be used (no
powder added) and no irritating odor
Metal dome
Remote control all keys using metal dome button,
and life must be ≥ 1000000 times, continuous
press test times ≥ 500,000 times, can be restored
to the original load
Specifications
NO.
Item
battery
Supply voltage
Current
Specifications
Alkaline battery
2.2-4.2V
≤ 5μA @ sleep power consumption
≤ 3mA @ standby power
consumption
≤ 20mA @ transmit power
(conventional button)
≤ 25 mA @ Recording function
(voice function)
Audio output
Mono, 16K sampling rate, 16bit
precision audio output
Transmission
distance
(Bluetooth)
Bluetooth
protocol
(Bluetooth)
Signal
Requirements
(Bluetooth)
≥12m
10
11
12
13
BT4.1
Meet
the
communication
transmission distance requirements,
while meeting Bluetooth BQB
certification requirements
Voice
Speech software recognition rate ≥
Requirements
90% (sentence), in case of
(Bluetooth)
interference: speech recognition rate
≥85% (sentence) (need to confirm
and STB and software normal state)
Connection
≤200ms, here refers to the
Response
restoration of connection speed,
(Bluetooth)
through the remote control test began
to broadcast to be connected to the
time interval
Other common HOST-side adaptation driver, without
Bluetooth
affecting the original Bluetooth
device effects
universal device support, such as
Bluetooth headset / audio (HSP /
HFP,
A2DP,
etc.),
Bluetooth
keyboard,
Bluetooth
mouse,
gamepad and so on.
Audio
No abnormal audio transmission, no
transmission
significant interference, lost data, cutrequirements
off and other phenomena
Microphone
Sensitivity -42 ± 3dB
sensitivity
Microphone
Can not be lower than 58dB
signal to noise
ratio
Warning:
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference
2. This device must accept any interference received including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate
the equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
Author                          : Shawn Cheung
Create Date                     : 2018:03:29 15:46:20+08:00
Modify Date                     : 2018:03:29 15:46:20+08:00
Title                           : 
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.6-c015 81.157285, 2014/12/12-00:43:15
Metadata Date                   : 2018:03:29 15:46:20+08:00
Creator Tool                    : Adobe Acrobat Pro DC 15.8.20082
Format                          : application/pdf
Creator                         : Shawn Cheung
Document ID                     : uuid:e3041322-d423-45c6-a8cf-9529c4152a87
Instance ID                     : uuid:63a4aca5-33be-4dcf-b415-f9aced05d86f
Producer                        : Adobe Acrobat Pro DC 15.8.20082
Page Count                      : 4

EXIF Metadata provided by EXIF.tools