SEIKAKU TECHNICAL GROUP UPUL-MODAU-BP Wireless Microphone User Manual MOD 800R 800P 800H ALTO

Download:
Mirror Download [FCC.gov]
Document ID	923148
Application ID	jYKEOSBkjROLetjaqpi0Jg==
Document Description	User Manual III
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	253.45kB (3168151 bits)
Date Submitted	2008-04-03 00:00:00
Date Available	2008-04-03 00:00:00
Creation Date	2008-03-20 10:27:55
Producing Software	Corel PDF Engine Version 9.397
Document Lastmod	2008-03-20 10:27:55
Document Title	MOD-800R-800P-800H ALTO .cdr
Document Creator	CorelDRAW Version 9.397
Document Author:	jh

LTO
OWNER'S MANUAL
MOD-800R
MOD-800H/MOD-800P/MOD-800LV/MOD-800HS/MOD-800G
WIRELESS MICROPHONE SYSTEM
SEIKAKU TECHNICAL GROUP LIMITED
NO. 1, Lane 17, Sec. 2, Han Shi West Road, Taichung 40151, Taiwan
http://www.altoproaudio.com Tel: 886-4-22313737
email: alto@altoproaudio.com Fax: 886-4-22346757
All rights reserved to ALTO. All features and content might be changed
without prior notice. Any photocopy, translation, or reproduction of part of this
manual without written permission is forbidden. Copyright 2007
Seikaku Group
NF02682-1.3
www.altoproaudio.com
Version 1.3 DEC. 2007
IMPORTANT SAFETY INSTRUCTION
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
TO REDUCE THE RISK OF ELECTRIC SHOCK
PLEASE DO NOT REMOVE THE COVER OR
THE BACK PANEL OF THIS EQUIPMENT.
THERE ARE NO PARTS NEEDED BY USER
INSIDE THE EQUIPMENT. FOR SERVICE,
PLEASE CONTACT QUALIFIED SERVICE
CENTERS.
This symbol, wherever used, alerts you to th e
presence of un-insulated and dangerous voltages
within the product enclosure. These are voltages that
may be sufficient to constitute the risk of electric
shock or death.
This symbol, wherever used, alerts you to
important operating and maintenance instructions.
Please read.
Protective Ground Terminal
AC mains (Alternating Current)
Hazardous Live Terminal
ON: Denotes the product is turned on.
OFF: Denotes the product is turned off.
CAUTION
Describes precautions that should be observed to
prevent damage to the product.
Read this Manual carefully before operation.
Keep this Manual in a safe place.
Be aware of all warnings reported
with this symbol.
Keep this Equipment away from water and
moisture.
Clean it only with dry cloth. Do not use
solvent or other chemicals.
Do not damp or cover any cooling opening.
Install the equipment only in accordance with
the Manufacturer's instructions.
Power Cords are designed for your safety. Do
not remove Ground connections! If the plug
does not fit your AC outlet, seek advice from
a qualified electrician. Protect the power
cord and plug from any physical stress to
avoid risk of electric shock. Do not place
heavy objects on the power cord. This could
cause electric shock or fire.
Unplug this equipment when unused for long
periods of time or during a storm.
Refer all service to qualified service personnel
only. Do not perform any servicing other than
those instructions contained within the
User's Manual.
To prevent fire and damage to the product,
use only the recommended fuse type as
indicated in this manual. Do not short-circuit
the fuse holder. Before replacing the fuse,
make sure that the product is OFF and
disconnected from the AC outlet.
8. WARRANTY
WARNING
To reduce the risk of electric shock
and fire, do not expose this equipment
to moisture or rain.
Dispose of this product should
not be placed in municipal waste
and should be separate collection.
Move this Equipment only with a cart,
stand, tripod, or bracket,
specified by the
manufacturer, or
sold with the
Equipment. When
a cart is used, use
caution when
moving the cart /
equipment
combination to
avoid possible
injury from tip-over.
Permanent hearing loss may be caused by
exposure to \ extremely high noise levels.
The US. Government's Occupational Safety
and Health Administration (OSHA) has
specified the permissible exposure to noise
level.
These are shown in the following chart:
The apparatus shall be connected to a mains
socket outlet with a protective earthing
connection.
The mains plug or an appliance coupler is used
as the disconnect device, the disconnect device
shall remain readily operable.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
and (2) this device must accept any interference received,
including interference that may cause undesired operation.
WARNING: changes or modifications not expressly
approved by the party responsible for compliance could
void the user's authority to operate the equipment.
To obtain Warranty Service, the buyer should first fill out and return the enclosed
Warranty Registration Card within 10 days of the Purchase Date.
All the information presented in this Warranty Registration Card gives the
manufacturer a better understanding of the sales status, so as to provide a
more effective and efficient after-sales warranty service. Please fill out all the
information carefully and genuinely, miswriting or absence of this card will void
your warranty service.
2.1 In case of return for any warranty service, please make sure that the
product is well packed in its original shipping carton, and it can protect your
unit from any other extra damage.
2.2 Please provide a copy of your sales receipt or other proof of purchase with
the returned machine, and give detail information about your return address
and contact telephone number.
2.3 A brief description of the defect will be appreciated.
2.4 Please prepay all the costs involved in the return shipping, handling and
insurance.
3.1 LTO warrants that this product will be free from any defects in materials
and/or workmanship for a period of 1 year from the purchase date if you
have completed the Warranty Registration Card in time.
3.2 The warranty service is only available to the original consumer, who purchased
this product directly from the retail dealer, and it can not be transferred.
3.3 During the warranty service, LTO may repair or replace this product at its
own option at no charge to you for parts or for labor in accordance with the
right side of this limited warranty.
3.4 This warranty does not apply to the damages to this product that occurred
as the following conditions:
Instead of operating in accordance with the user's manual thoroughly, any abuse
or misuse of this product.
Normal tear and wear.
The product has been altered or modified in any way.
Damage which may have been caused either directly or indirectly by another
product / force / etc.
Abnormal service or repairing by anyone other than the qualified personnel or
technician.
And in such cases, all the expenses will be charged to the buyer.
3.5 In no event shall LTO be liable for any incidental or consequential damages.
Some states do not allow the exclusion or limitation of incidental or
consequential damages, so the above exclusion or limitation may not apply to
you.
3.6 This warranty gives you the specific rights, and these rights are compatible
with the state laws, you may also have other statutory rights that may vary
from state to state.
7. TECHNICAL SPECIFICATION
IN THIS MANUAL:
Model
Channel
Frequency band
Receiver type
Frequency response
Frequency stability
T.H.D.
Modulation mode
S/N Ratio
Dynamic
RF sensitivity
Audio output
Balance output
Power supply
Dimensions (W D H)
Weight
1. INTRODUCTION...............................................................................1
2. FEATURES......................................................................................3
3. CONTROL ELEMENTS.....................................................................4
4. OPERATION ...................................................................................8
5. MODELLING TECHNOLOGY FOR WIRELESS MICROPHONES.............13
6. ANNEX ..........................................................................................15
7. TECHNICAL SPECIFICATIONS..........................................................20
8. WARRANTY...................................................................................21
Multi-channels, up to 144 frequency presets for each frequency band
UHF 470-900 MHz (Dependent on applicable country regulations)
PLL UHF SYNTHESIZED
50 Hz-15 kHz ( 3 dB)
0.005% (-10 -50 )
1 kHz 0.8%
FM (F3E)
90 dB
100 dB
-100 dBm/30 dB SINAD
20KHz deviation
Unbalanced 6.3mm phone jack 550mV;
1.1 V, 20 kHz deviation
DC 15V/ 500mA (AC 115V/230V 50/60Hz adaptor)
210 155 44 mm; (8.2" 6.1" 1.7")
1.10 Kg
1. INTRODUCTION
Model
Oscillation mode
Carrier Frequency Band
Frequency Response
Frequency Stability
T.H.D.
Modulation Mode
RF Output Power
Dynamic
Tone Trequency
Current Drain
Max. Deviation
Battery
Optional
Mic. Capsule(Optional)
Dimensions
Weight
PLL UHF SYNTHESIZED
UHF 470-900 MHz Dependent on applicable country regulations
50 Hz-15 kHz ( 3 dB)
0.005% (-10 ~ 50 )
1 kHz<0.8%
FM (F3E)
5-50mW(adjustable 3 bands)
100 dB
30-33 kHz
100 mA
35 kHz
"AA" type 2
Nickel hydrogen battery+charger
Condenser or Dynamic Capsule
277
36.5mm (10.9" 1.44")
0.246 Kg
Model
Oscillation mode
Carrier Frequency Band
Frequency Response
Frequency Stability
T.H.D.
Modulation Mode
RF Output Power
Dynamic
Tone Trequency
Current Drain
Max. Deviation
Battery
Optional
Mic. Capsule(Optional)
Dimensions(W D H)
Weight
PLL UHF SYNTHESIZED
UHF 470-900 MHz Dependent on applicable country regulations
50 Hz-15 kHz ( 3 dB)
0.005% (-10 ~ 50 )
1 kHz<0.8%
FM (F3E)
5-50mW(adjustable 3 bands)
100 dB
30-33 kHz
100 mA
35 kHz
"AA" type 2
Nickel hydrogen battery +charger
Condenser or Dynamic Capsule
97 68 22 mm (3.82" 2.68" 0.87")
0.090 Kg
Thank you for your purchasing the MOD-800 LTO wireless system.
Your MOD-800 is based on a new revolutionary UHF PLL (phase loop locked) circuit
which allows the simultaneous use of more than 144 channels (depending on your
country regulations). The Receiver is provided with 2 antennas that constantly
monitor the incoming RF (radio frequency) signal and send only the stronger RF
signal to the MOD-800 Receiver. Your MOD-800 system is full of key features
such as AUTO-SCAN function, battery level monitoring and others.
Enjoy your MOD-800 and make sure to read this Manual carefully before operation!
Depending on the options available your MOD-800 system consists of:
MOD-800R
LTO
16 1
AF
RF
GROUP
CHANNEL
UP
MENU
DOWN
MEM
15
14
ANT B
13
12
11
MHz
PLL UHF DIVERSITY WIRELESS RECEIVER
ANT-A
10
POWER
ANT-B
MOD-800H: It is a handheld transmitter with rubberised finished and level
hi-fi microphone capsule.
LTO
MHz
MOD-800H
6. ANNEX
1. INTRODUCTION
: Dynamic Mic.
: 50 Hz~16 kHz( 3 dB)
850.125
850.325
850.525
850.725
850.925
851.125
851.325
851.525
851.725
851.925
852.125
852.325
852.525
852.725
852.925
853.125
853.325
853.525
853.725
853.925
854.125
854.325
854.525
854.725
854.925
855.125
855.325
855.525
855.725
855.925
856.125
856.325
856.525
856.725
856.925
857.125
857.325
857.525
857.725
857.925
858.125
858.325
858.525
858.725
858.925
859.125
859.325
859.525
859.725
859.925
860.125
860.325
860.525
860.725
860.925
861.125
861.325
861.525
861.725
861.925
862.125
862.325
862.525
862.725
862.925
863.125
863.325
863.525
863.725
863.925
864.125
864.325
864.525
864.725
864.925
865.125
865.325
865.525
865.725
865.925
866.125
866.325
866.525
866.725
866.925
867.125
867.325
867.525
867.725
867.925
868.125
868.325
868.525
868.725
868.925
869.125
869.325
869.525
869.725
869.925
870.125
870.325
870.525
870.725
870.925
871.125
871.325
871.525
871.725
871.925
872.125
872.325
872.525
872.725
872.925
873.125
873.325
873.525
873.725
873.925
-40
874.125
874.325
874.525
874.725
874.925
875.125
875.325
875.525
875.725
875.925
876.125
876.325
-50
876.525
876.725
876.925
877.125
877.325
877.525
877.725
877.925
878.125
878.325
878.525
878.725
: 300
20% at 1kHz
: -71 dB 3 dB
: Omni-directional
Y:-50.9 dBv/Pa
Y:-48.6 dBm/Pa
D:0.0 dB
X:1000 Hz
Y:-77.5 dBv/Pa
Y:-75.3 dBm/Pa
D:0.0 dB
D:-26.6 dB
-60
-70
1. The values with underlines should be scanned manually by adjusting the UP/DOWN key.
2. The following channels can be used simultaneously without any interference.
-80
-90
20
50
100
200
500
1K
2K
5K
10K
20K
MOD-800P: A bodypack transmitter with belt clip. The bodypack transmitter will
come with either:
Group 1-1: 850.125
Group 1-10: 851.925
Group 2-2: 852.725
Group 2-5: 859.925
Group 3-4: 857.725
Group 2-6: 862.325
Group 5-8: 867.725
Group 4-11: 874.725
Group 8-6: 863.525
Group 8-8: 868.325
MHz
SELECT
915.125
915.325
915.525
915.725
915.925
916.125
916.325
916.525
916.725
916.925
917.125
917.325
917.525
917.725
917.925
918.125
918.325
918.525
918.725
918.925
919.125
919.325
919.525
919.725
919.925
920.125
920.325
920.525
920.725
920.925
921.125
921.325
921.525
921.725
921.925
922.125
922.325
922.525
922.725
922.925
923.125
923.325
923.525
923.725
923.925
924.125
924.325
924.525
924.725
924.925
925.125
925.325
925.525
925.725
925.925
926.125
926.325
926.525
926.725
926.925
927.125
927.325
927.525
927.725
927.925
928.125
928.325
928.525
928.725
928.925
929.125
929.325
929.525
929.725
929.925
930.125
930.325
930.525
930.725
930.925
931.125
931.325
931.525
931.725
931.925
932.125
932.325
932.525
932.725
932.925
933.125
933.325
933.525
933.725
933.925
934.125
934.325
934.525
934.725
934.925
935.125
935.325
935.525
935.725
935.925
936.125
936.325
936.525
936.725
936.925
937.125
937.325
937.525
937.725
937.925
938.125
938.325
938.525
938.725
938.925
939.125
939.325
939.525
939.725
939.925
940.125
940.325
940.525
940.725
940.925
941.125
941.325
941.525
941.725
941.925
942.125
942.325
942.525
942.725
942.925
943.125
943.325
943.525
943.725
CH/ON
LTO
(1)
MOD-800P
(1). A cable to be connected to an electric guitar or bass.(MOD-800G)
(2). A Lavalier Microphone. This is the little "bug" to be clipped on ties, shirts,
nipples, etc.(MOD-800LV)
(3). A Headset Microphone that is fit like a pair of sunglasses so that the Player
has both hands free to play an instrument, dance, shot the Audience, etc.(MOD-800HS)
6. ANNEX
1. INTRODUCTION
(2)
798.125
798.325
798.525
798.725
798.925
799.125
799.325
799.525
799.725
799.925
800.125
800.325
800.525
800.725
800.925
801.125
801.325
801.525
801.725
801.925
802.125
802.325
802.525
802.725
802.925
803.125
803.325
803.525
803.725
803.925
804.125
804.325
804.525
804.725
804.925
805.125
805.325
805.525
805.725
805.925
806.125
806.325
806.525
806.725
806.925
807.125
807.325
807.525
807.725
807.925
808.125
808.325
808.525
808.725
808.925
809.125
809.325
809.525
809.725
809.925
810.125
810.325
810.525
810.725
810.925
811.125
811.325
811.525
811.725
811.925
812.125
812.325
812.525
812.725
812.925
813.125
813.325
813.525
813.725
813.925
814.125
814.325
814.525
814.725
814.925
815.125
815.325
815.525
815.725
815.925
816.125
816.325
816.525
816.725
816.925
817.125
817.325
817.525
817.725
817.925
818.125
818.325
818.525
818.725
818.925
819.125
819.325
819.525
819.725
819.925
820.125
820.325
820.525
820.725
820.925
821.125
821.325
821.525
821.725
821.925
822.125
822.325
822.525
822.725
822.925
823.125
823.325
823.525
823.725
823.925
824.125
824.325
824.525
824.725
824.925
825.125
825.325
825.525
825.725
825.925
826.125
826.325
826.525
826.725
1. The values with underlines should be scanned manually by adjusting the UP/DOWN key.
2. The following channels can be used simultaneously without any interference.
Group 1-1: 798.125
Group 1-10: 819.725
Group 2-2: 800.725
Group 2-5: 807.925
Group 3-4: 805.725
Group 2-6: 810.325
Group 5-8: 815.725
Group 4-11: 822.725
Group 8-6: 811.525
Group 8-8: 816.325
680 ohm
50-12 kHz;
-65 dB 3 dB at 1kHz
12 180 mm( 0.47" 7.1")
22g(0.049Ib)
(3)
600 ohm
: 80-12 kHz;
-68 dB+/-3 dB at 1kHz;
Uni-directional;
52g (0.12Ib)
2. FEATURES
User Friendly interface including a large blue back lighted display and an intuitive
MENU system for easy operation.
Auto Scan Function
2 Antennas and switching diversity circuit
Selector for three different audio output levels depending of kind of mixer used
Squelch control to minimize RF interferences
Soft touch rubberised painting to avoid handling noise
Rechargeable battery design
Selector for three different output levels depending of kind of receiver used
LCD display
Battery status display
Mute function (this function is very welcomed by Politicians...)
Lock function to avoid miss action during a live performance
Each MOD-800 System complies with EMC regulations and includes 144 different channels.
(Not all channels may be available in certain Countries depending on local regulations).
They are manufactured under ISO9000:2000, ISO/TS 16949:2002 quality
management system.
SP
OT
LI
6. ANNEX
3. CONTROL ELEMENTS
GH
Ok, enough with numbers. Let's start to familiarize with your MOD-800 System.
First of all, the MOD-800R Receiver:
MOD-800R
LTO
16 1
ANT B
AF
RF
GROUP
CHANNEL
UP
MENU
DOWN
MEM
12
11
PLL UHF DIVERSITY WIRELESS RECEIVER
702.725
702.925
703.125
703.325
703.525
703.725
703.925
704.125
704.325
704.525
704.725
704.925
705.125
705.325
705.525
705.725
705.925
706.125
706.325
706.525
706.725
706.925
707.125
707.325
707.525
707.725
707.925
708.125
708.325
708.525
708.725
708.925
709.125
709.325
709.525
709.725
709.925
710.125
710.325
710.525
710.725
710.925
711.125
711.325
711.525
711.725
711.925
712.125
712.325
712.525
712.725
712.925
713.125
713.325
713.525
713.725
713.925
714.125
714.325
714.525
714.725
714.925
715.125
715.325
715.525
715.725
715.925
716.125
716.325
716.525
716.725
716.925
717.125
717.325
717.525
717.725
717.925
718.125
718.325
718.525
718.725
718.925
719.125
719.325
719.525
719.725
719.925
720.125
720.325
720.525
720.725
720.925
721.125
721.325
721.525
721.725
721.925
722.125
722.325
722.525
722.725
722.925
723.125
723.325
723.525
723.725
723.925
724.125
724.325
724.525
724.725
724.925
725.125
725.325
725.525
725.725
725.925
726.125
726.325
726.525
726.725
726.925
727.125
727.325
727.525
727.725
727.925
728.125
728.325
728.525
728.725
728.925
729.125
729.325
729.525
729.725
729.925
730.125
730.325
730.525
730.725
740.125
740.325
740.525
740.725
740.925
741.125
741.325
741.525
741.725
741.925
742.125
742.325
742.525
742.725
742.925
743.125
743.325
743.525
743.725
743.925
744.125
744.325
744.525
744.725
744.925
745.125
745.325
745.525
745.725
745.925
746.125
746.325
746.525
746.725
746.925
747.125
747.325
747.525
747.725
747.925
748.125
748.325
748.525
748.725
748.925
749.125
749.325
749.525
749.725
749.925
750.125
750.325
750.525
750.725
750.925
751.125
751.325
751.525
751.725
751.925
752.125
752.325
752.525
752.725
752.925
753.125
753.325
753.525
753.725
753.925
754.125
754.325
754.525
754.725
754.925
755.125
755.325
755.525
755.725
755.925
756.125
756.325
756.525
756.725
756.925
757.125
757.325
757.525
757.725
757.925
758.125
758.325
758.525
758.725
758.925
759.125
759.325
759.525
759.725
759.925
760.125
760.325
760.525
760.725
760.925
761.125
761.325
761.525
761.725
761.925
762.125
762.325
762.525
762.725
762.925
763.125
763.325
763.525
763.725
763.925
764.125
764.325
764.525
764.725
764.925
765.125
765.325
765.525
765.725
765.925
766.125
766.325
766.525
766.725
766.925
767.125
767.325
767.525
767.725
767.925
768.125
768.325
768.525
768.725
10
POWER
702.525
ANT-A
702.325
15
14
13
MHz
702.125
ANT-B
It switches your MOD-800R ON and OFF.
You can adjust the right values through these two keys once the MENU is
activated.
All the key functions of your MO D-800 Receiver are monitored through this
big, amazing, blue back lighted display such as: Ra dio Signal, Audio Signal,
Battery life (absolutely with some little magic you ca n see the battery life of
the transmitter directly on the receiver!), group va lue, channel value and the
selected frequency.
Via this key you can activate the desired function.
You can enter the selected frequency via this key, moreover you can also
activate the AUTO-SCAN function via the same key.
You must connected the two cute antennas you found in the box if yo u want
to get proper RF transmission.
Via this knob, you can select the desired effect. There are totally 16 options
for your operation. For more details, please refer to chapter 5.
SP
6. ANNEX
572.125
572.325
572.525
572.725
572.925
573.125
573.325
574.525
573.525
574.725
573.725
574.925
573.925
575.125
574.125
575.325
574.325
575.525
575.725
575.925
576.125
576.325
576.525
576.725
576.925
577.125
577.325
577.525
577.725
577.925
578.125
578.325
578.525
578.725
578.925
579.125
579.325
579.525
579.725
579.925
580.125
580.325
580.525
580.725
580.925
581.125
581.325
581.525
581.725
581.925
582.125
582.325
582.525
582.725
582.925
584.125
583.125
584.325
583.325
584.525
583.525
584.725
583.725
584.925
583.925
585.125
585.325
585.525
585.725
585.925
586.125
586.325
OT
LI
3. CONTROL ELEMENTS
GH
15-18V DC
500mA
AF OUT
UNBALANCED
AF OUT
BALANCED
To connect a balanced cable with XL R connector (we forgot to tell you that
although your MOD-800 system is wireless, you will still need to con nect the
receiver to your Mixing Desk and to a wall plug !)
To be used with an unbalanced cable and standard 1/4" mono jack.
638.925
639.125
639.925
640.125
640.325
640.525
640.725
640.925
641.125
641.325
641.525
641.725
641.925
642.125
642.325
642.525
642.725
642.925
643.125
643.325
643.525
643.725
643.925
644.125
644.325
644.525
644.725
644.925
645.125
645.325
645.525
645.725
645.925
646.125
646.325
646.525
646.725
646.925
647.125
647.325
647.525
647.725
648.925
647.925
649.125
648.125
649.325
648.325
649.525
648.525
649.725
648.725
649.925
650.125
650.325
650.525
650.725
650.925
651.125
651.325
651.525
651.725
651.925
652.125
652.325
You can connect the supplied AC Adapter to this socket.
4 2
638.725
639.725
LTO
638.525
639.525
MHz
638.325
639.325
MOD-800H
638.125
This spring steel mesh grill will protect the microphone capsule during a live
performance. Especially made for heavy metal players, alcohol, drugs, etc.
This nice blue LCD will indicate the current operation status.
If you press this key for a few seconds, your Transmitter will be switched ON
or OFF. Once you have switched the unit ON, just press this key again slightly
and you can edit various parameters, such as CHANNEL, GROUP, RF POWER
LEVEL and LOCK/UNLOCK. Once you are in the LOCK position, no further
operation is allowed. And in a few seconds, the display will show the current
selected frequency (In MHZ). Battery level will also be shown.
SP
OT
LI
6. ANNEX
3. CONTROL ELEMENTS
GH
Most countries closely regulate the radio frequencies used in the transmission
of wireless information. These regulations state which devices can use which
frequencies, and help to limit the amount of RF(radio frequency)interference in all
wireless communications. To be flexible enough to operate worldwide, MOD-800R
Wireless receivers are available in a number of models, each with a unique
frequency range. Each frequency range, or band, spans up to 24 MHz of the
wireless broadcast spectrum. Available bands are:
Once you are in operation mode, you can access this key to edit certain
parameters. Press this key for a few seconds and the unit will enter in
the MUTE mode. (In this way, you can tell your Bass Player what you
think about the Sound Engineer without anybody knowing that!). Press
it again for a few seconds and you will unmute the unit.
This unit may be powered from one pair of dry or rechargeable batteries,
um3 size AA 1.5V.
With the rechargeable batteries putting inside, use the charger supplied to
recharge the batteries.
Note: This charger is for buyer's option. You can buy it from your dealer.
SELECT
CH/ON
LTO
MOD-800P
F2:518.000-542.000(518-544)MHz
F3:572.000-596.000(572-598)MHz
F4:638.000-662.000(638-664)MHz
F5:702.000-726.000(702-731)MHz
F6:740.000-764.000(740-769)MHz
F7:798.000-822.000(798-827)MHz
F8:850.000-874.000(850-879)MHz
F9:915.000-939.000(915-944)MHz
The Antenna of your MOD-800H is integrated in the microphone body.
Please do not cover the antenna for optimal RF transmission. We also
include 7 different color antenna covers for multiple operation of frequency.
MHz
F1:470.000-494.000(470-496)MHz
470.125
470.325
470.525
470.725
470.925
471.125
471.325
471.525
471.725
471.925
472.125
472.325
472.525
472.725
472.925
473.125
473.325
473.525
473.725
473.925
474.125
474.325
474.525
474.725
474.925
476.125
475.125
476.325
475.325
476.525
475.525
476.725
475.725
476.925
475.925
477.125
477.325
477.525
477.725
477.925
478.125
478.325
478.525
478.725
478.925
479.125
479.325
479.525
479.725
480.925
479.925
481.125
480.125
481.325
480.325
481.525
480.525
481.725
480.725
481.925
482.125
482.325
482.525
482.725
482.925
483.125
483.325
483.525
483.725
483.925
484.125
484.325
518.125
518.325
518.525
518.725
518.925
519.125
519.325
519.525
519.725
519.925
520.125
520.325
520.525
520.725
520.925
521.125
521.325
521.525
521.725
522.925
521.925
523.125
522.125
523.325
522.325
523.525
522.525
523.725
522.725
523.925
524.125
524.325
524.525
524.725
524.925
525.125
525.325
525.525
525.725
525.925
526.125
526.325
526.525
527.725
526.725
527.925
526.925
528.125
527.125
528.325
527.325
528.525
527.525
528.725
528.925
529.125
529.325
529.525
529.725
529.925
530.125
530.325
530.525
530.725
530.925
531.125
531.325
531.525
531.725
531.925
532.125
532.325
SP
5. MODELLING TECHNOLOGY
Here is a List and description of the MODELS avai lable on the
OT
LI
3. CONTROL ELEMENTS
GH
LTO Receivers:
FLAT- In this position, the Modeller is in bypass mode. The
Modeller is not adding any character to the Audio Output
LTO
CONFERENCE- To be used during Meetings. Especially made for
speech and to avoid the typical boominess of many wireless microphones
used for such purpose.
BROADCAST- This Model will add a certain character to the signal.
It is typical of the Male Announcers through a solid state Transmitter.
WARMTH- Good for Lead Vocalist Male and Female. It will make the
Male voice warmer and the Female voice more body.
DE-ESSER- The name tells everything. Use it to de-emphasize the sibilants,
like the letter sound 's', for example, from your vocals.
VINTAGE RADIO- Old tube based Receivers made the Announcer voice
sound like... yeah, we call it Vintage. Try it for a smooth satin voice. Ideally used
for speech, but we found some other neat applications in the studio as well!
This nice blue LCD will indicate the current operation status.
If you press this key for a few seconds, your Transmitter will be switched
ON or OFF. Once you have switched the unit ON, just press this key again
slightly and you can edit various parameters such as CHANNEL, GROUP,
RF POWER LEVEL and LOCK/UNLOCK. Once you are in the LOCK position
no further operation is allowed. And in a few seconds, the display will show
the current selected frequency (in MHZ). Battery level will also be shown.
Once you are in operation mode, you can access this key to edit certain
parameters. Press this key for a few seconds and the unit will enter in the
MUTE mode. (In this way, you can tell your Bass Player what you think about
the Sound Engineer without everybody knowing that!). Press it again for a few
seconds and you will unmute the unit.
MID-WARMTH, a moderate voice enhancement making use of Bass
enhancer.
GROOVY- to add a touch of groov e to Male and Female Lead Vocalist.
Perfect for Blues.
This connector is used to connect the unit with the clip microphones. for
example, HM-38 condenser microphone or LM-10 clip microphone.
(1) (4) (3)
SHARP- makes human voice quite crispy. Perfect for voice poor in
high frequencies or if you get a cold...
KARAOKE- yes, microphones are used in a very peculiar way in Karaoke
Bars and Venues. Usually the sound systems there are poor. Use this Model to
add high frequencies and have your voice sound like a Pro's!
(2)
, GND
, Phantom power supply for Condenser microphone
, for Guitar, bass and keyboards
, for Dynamic or Condenser microphone
PIANO BAR- it similar to the Karaoke Model but we have also added
key low frequencies to give the voice more body.
HEAVY METAL- This model will make your voice sound very aggressive.
Good for Rock & Roll and if you have an argument with your Mother in law...
DISCO- It is similar to the Heavy Metal mod el but more tailored for
Disco Music.
CHOIR- Selected frequencies have been manipulated to make this
Model suitable for more than one vocalist when singing in a choir
FEMALE VOICE- Female Singers voices present a frequency response
that is quite different from the Male voice. This Model gently adds certain low
frequencies to make the female voice more consistent and at the same time will
make the highest frequencies of the female voice more sparkling and defined.
PIANO BAR CHOIR- It is a combination of the Karaoke Model and
the Piano Bar Model. Good when more than one voice is singing along together.
With the rechargeable batteries put inside, use the charger supplied to
recharge the batteries.
This unit may be powered from one pair dry or rechargeable batteries,
Um3 size AA 1.5V.
It is the detachable belt clip for easy carry during the live applications.
It is a flexible antenna. To get effective transmission, never cover the
antenna with hand, clothes, etc. during operation, and always position
the transmitter nearby the receiver.
4.
OPERATION
3. CONTROL
ELEMENTS
OK, if so far you remember all the functions and features of your MOD-800
system you are ready to operate the Unit. Let's start from the Receiver:
A.This indicates the Frequency Group. There are 12 Groups and each
Group includes 12 different channels (frequencies).
B.This indicates the Channel Number. There are 12 channels for each one
of the 12 Groups for a total of 144 channels.
C.MUTE: If the Display shows , the Mute function is disengaged. If the
display shows , the Mute function is engaged.
D.This shows the selected frequency.
E.This shows you the remaining life of the Battery of your Transmitter. 3
segments means full life, 1 segment means it is time to replace or
recharge the battery. If this icon disappeared, it means
that your transmitter is switched OFF.
F. This bar(AF) indicates the level of the audio signal coming into the Re ceiver.
G.This bar(RF) indicates the level of radio signal coming into the Receiver.
H.This indicates which of the 2 antennas is operating. Radio signal will
automatically switch from Ant 1 to Ant 2, indicating that the diversity
circuit is operating properly.
- And now, let's see the four keys in detail:
MEM key: The first function of this key is to activate the AUTO-SCAN
function. Suppose that you have more than one LTO transmitter in
front of you with your MOD-800R Receiver and you want to start to
operate one of them with your MOD-800 Receiver.
First of all, you should turn your Transmitter ON, then with your
MOD-800R Receiver turned ON, press the MEM key at least for
one second. Your MOD-800R will automatically look for the frequency
where your LTO Transmitter is operating. It will scan all the 12
Groups and Channels for a total of 144 frequencies available.
5. MODELLING TECHNOLOGY
This document applies to all LTO Wireless Receivers used in conjunction with
LTO Handheld and Bodypack Transmitters
Fundamentals: LTO has created and integrated a wireless microphone
system offering 16 modelling presets resulting in a range of tonal response
for a wide variety of applications. Until this innovative introduction made for
the first time in the world in a wireless system by LTO, wireless systems
consisting of receiver and microphone transmitters produced a single sound
pattern. Each microphone capsule design, because of the laws of physics,
features its own frequency response and adds a certain tonal colour to the
signal it transmits. If you do not like the colour added, you must change
the microphone section of your transmitter, much like a painter chooses
a different colour from his palate. Many brands today offer several different
microphone capsules for their wireless systems but this flexibility is far behind
the wide choice of tones or "models", as we call them at LTO. In fact, a
specific model of wireless microphone may be used by a male vocalist or
female vocalist during a live performance, by a Priest in a church service,
by a speaker during a seminar, by and aerobics teacher during a training
lesson, by a DJ, by a choir, by an announcer, by an auction director, we
could go on and on forever with endless applications.
It is now evident that each one of these users would benefit from a different
tone or "model". But even the same user would like to get a different voicing
or "model" depending on the style he is singing. What model serv es the music
best? It's fair to say that it will be different whether he's singing Rock, Blues,
or Folk and, of course can also change from song to song. It is unlikely to buy
several different microphone capsules in order to get diff erent tone or "model"
depending of the kind of use of performance. This would be unpractical, since
it would be impossible to change a microphone cap sule during a performance,
not to mention the cost involved.
LTO has therefore created and inte grated in some of its wireless receiv ers a
range of MODELS. Using these 16 different MODELS the user can select
different sound patterns simply with the turn of one knob. There are preset
MODELS for male and female Vocalists, DJ, Speakers, Announcers, and more.
In a few words, with the LTO modelling technology applied to wireless systems,
the User can "fine tune" the sound of his microphone in 16 different ways.
4.
OPERATION
3. CONTROL
ELEMENTS
4.
OPERATION
3. CONTROL
ELEMENTS
You don't want accidental change of frequency or other setting in the middle of a
performance, do you? Any miss-operation during a live performance can be easily
avoided thanks to the LOCK function. With the LOCK function ON no further change
of setting is allowed until the Transmitter is unlocked. To access the LOCK Menu,
press the CH/ON key four times and then press the SELECT key to lock or unlock
the Transmitter Settings. Your choice of setting will automatically be saved into the
Transmitter in a few seconds. The blue display shows "lock" and "unlock" depending
on the operating mode.
Fig 10: LOCK
Fig 11: UNLOCK
During this process, the audio output will be muted and the display will show
you the Group Number scanned, the channel number scanned and the
frequency that is being scanned. Once the transmitter frequency has been
found, the display will flash and the RF bar indicator and Battery life icon will
appear. Press MEM again slightly and such frequency will be stored into your
MOD-800R Receiver. Please note that frequencies can be scanned manually
using the UP/DOWN key. See the Annex for more details.
This key activates several functions:
Press this key slightly once and you will get into the MANUAL SELECT for
the 144 frequencies. When the GROUP indicator is flashing, you can press
the UP/DOWN keys to select manually the desired Group. Then you can press
the MEM key to store this setting.
Press the MENU key twice and the CHANNEL indicator will flash. Use the UP/DOWN
keys to selected the desired channel and then press MEM key to store this setting.
Press the MENU key three times and you can adjust the OUTPUT LEVEL. Using
the UP/DOWN keys you have the choice to select three different levels:
Sometimes, there are things that you want to tell to your Friends on stage or
your nearby Companion during a Meeting but not necessarily to the rest of the
world especially if you are ON LIVE on CNN... A smart feature on your Transmitter
allows you to easily MUTE the microphone so you are free to talk to the people
next to you without the rest of the world hearing what you say . To enter into
MUTE function simply press the SELECT key for a few seconds and the Transmitter
will mute any audio signal going to the Receiver. Press SELECT again for a few
seconds and you will UNMUTE the Transmitter.
PL 0 indicates that the output level is 1.1V
PL 1 indicates that the output level is 575mV
PL 2 indicates that the output level is 250mV
AF
RF
MHz
Fig 1
: This function is only available when using the XLR balanced output.
Press the MENU key four times and you will get into the MUTE function. Use the
UP/DOWN keys to mute/unmute the Unit.
AF
RF
AF
RF
MHz
Fig 2 mute function off
MHz
Fig 3 mute function on
Press the MENU key five times and you will activate the SQUELCH function. To
squelch or not to squelch, this is the issue...
Squelch is a complicated name to express a simple conce pt: The threshold above
or below that a signal is made pass through the receiver or not.
4.
OPERATION
3. CONTROL
ELEMENTS
-100 dB
-96 dB
-90 dB
-87 dB
-85 dB
-83 dB
-81 dB
-79 dB
10
-77 dB
4.
OPERATION
3. CONTROL
ELEMENTS
AF
RF
MHz
-93 dB
Fig 4
Press the CH/ON key for a few seconds and the transmitter will be powered ON.
At this point the blue back lighted display will show:
The frequency at which the unit is operating
The Battery Status
Preset frequency
MHz
Remaining battery life
Note: Why LTO wireless systems come with 144 different frequencies?
Not because you will need to use 144 different microphones at the same
time. It is unlikely that you will use more than 8 systems at the same
time so why 144 frequencies? This mainly depends on Countries regulations.
We offer frequencies from 470 to 900 MHZ. Some of these frequencies
are illegal in certain Countries and vice versa. Offering such a wide range of
frequencies we make sure that each single Country on the planet will
have more than enough choice of frequencies available. Not only: A
certain frequency is close to the frequency generated by lighting equipment,
a computer, a fax machine and so on. Therefore, thanks to the large
number of frequencies available you can easily switch to another frequency
that is interference-free.
In your Transmitter, there are 12 frequency bands or GROUPS. Each Group
contains 12 channels according to EMC regulations.
To select a Group you must first switch your Transmitter ON by pressing the
CH/ON key for a few seconds until you hear the beep and the blue display is
lighted. Then press the CH/ON key again slightly and you will access the GROUP
menu. At this point use the SELECT key to change the GROUP value from 1 to
12. Now, to access the CHANNEL menu, press again slightly the CH/ON key
two times and use the SELECT key to change frequency from 1 to 12. Your
setting will be automatically saved in a few seconds and the display will go back
to the main menu showing the operating frequency.
Once you have changed the operating frequency on your Transmitter,
you need to activate the SCAN function in your MOD-800R Receiver. In this
way the Receiver with synchronize automatically on the Transmitter frequency.
Fig 5
And now that you know how to operate your MOD-800R Receiver, let's
learn how to use the MOD-800 Transmitters. The following instructions
apply both to the handheld version and to the bodypack version.
There are 2 keys on the Transmitter labelled CH/ON and SELECT.
With the Transmitter switching ON, you can slightly press the CH/ON key again
and you will access to the following parameters:
Preset Group
Preset Channel
Your Transmitter can operate on three different levels of output power . These
are different from the Handheld Model and the Bodypack model.
For the Handheld model the levels are
- PL 0, the output power is 0 dBm
- PL 1, the output power is 5 dBm
- PL 2, the output power is 10 dBm
And for the Bodypack version the levels are
- PL 0, the output power is 0 dBm
- PL 1, the output power is 5 dBm
- PL 2, the output power is 10 dBm
position the transmitter nearby the receiver.
Fig 6
Fig 7

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 12
Create Date                     : 2008:03:20 10:27:55
Modify Date                     : 2008:03:20 10:27:55
Producer                        : Corel PDF Engine Version 9.397
Author                          : jh
Creator                         : CorelDRAW Version 9.397
Title                           : MOD-800R-800P-800H ALTO .cdr

EXIF Metadata provided by EXIF.tools