SENA TECHNOLOGIES SP01 BLUETOOTH STEREO MOTORCYCLE HEADSET User Manual SPH10 Manual engx
Sena Technologies,Inc. BLUETOOTH STEREO MOTORCYCLE HEADSET SPH10 Manual engx
Users Manual
SPH10
Bluetooth® Stereo Headset and Intercom for Outdoor Sports
and Activities
SENA www.senabluetooth.com Users Guide
| SPH10
2
CONTENTS
INTRODUCTION ...................................................................................................................... 4
PACKAGE CONTENTS ............................................................................................................ 5
WEARING THE SPH10 ............................................................................................................ 7
Microphone Installation ..................................................................................................... 7
Using Chin Strap ............................................................................................................... 7
POWERING ON/OFF AND CHARGING .................................................................................. 8
Powering On ..................................................................................................................... 8
Powering Off ...................................................................................................................... 8
Charging ............................................................................................................................ 8
Low Battery Warning ......................................................................................................... 8
PAIRING THE SPH10 WITH BLUETOOTH DEVICES ............................................................. 9
Mobile Phone Pairing ........................................................................................................ 9
Bluetooth MP3 Player Pairing ........................................................................................... 9
Bluetooth GPS Navigation Pairing..................................................................................... 9
PAIRING WITH SELECTIVE PROFILE: A2DP STEREO OR HANDSFREE .......................... 10
A2DP Stereo Music Only ................................................................................................. 10
HFP for Phone Call Only ................................................................................................. 10
PAIRING WITH OTHER SPH10 HEADSETS FOR INTERCOM CONVERSATION ............... 11
USING THE SPH10 ................................................................................................................ 13
Volume Adjustment .......................................................................................................... 13
Mobile Phone Call Making and Answering ...................................................................... 13
Enabling/Disabling Voice Activated Phone Answering (Factory Default: Disabled) ......... 14
Intercom Conversation .................................................................................................... 14
3-Way Conference Intercom ............................................................................................ 15
4-Way Conference Intercom ........................................................................................... 16
Multi-User Conference Intercom ..................................................................................... 17
Terminating Conference Intercom ................................................................................... 17
Enabling/Disabling Voice Activated Intercom (Factory Default: Disabled) ....................... 17
Intercom Failure .............................................................................................................. 19
Intercom Reconnection ................................................................................................... 19
Stereo Music ................................................................................................................... 19
Function Priority .............................................................................................................. 21
Reset to Factory Default Settings .................................................................................... 21
Fault Reset ...................................................................................................................... 21
FIRMWARE UPGRADE ......................................................................................................... 23
PERATION QUICK REFERENCE .......................................................................................... 24
BATTERY INFORMATION ..................................................................................................... 25
MAINTENANCE AND CARE .................................................................................................. 26
DISPOSAL ............................................................................................................................. 27
CERTIFICATION AND SAFETY APPROVALS ....................................................................... 28
FCC Compliance Statement ............................................................................................ 28
FCC RF Exposure Statement .......................................................................................... 28
FCC Caution ................................................................................................................... 28
CE Declaration of Conformity .......................................................................................... 29
Industry Canada Statement ............................................................................................. 29
| SPH10
3
Bluetooth License ............................................................................................................ 29
WAIVER AND GENERAL RELEASE ...................................................................................... 30
Two-Year Limited Warranty ............................................................................................. 32
Limitation of Liability ........................................................................................................ 32
Return for Full Refund ..................................................................................................... 33
WARNING ................................................................................................................ 34
| SPH10
4
INTRODUCTION
Thank you for choosing the SENA SPH10, Bluetooth Stereo Headset and Intercom for
Outdoor Sports and Activities. With the SPH10, you can call hands-free on your Bluetooth
mobile phone, listen to stereo music or voice instructions of GPS navigations by Bluetooth
wirelessly, and have intercom conversations in full duplex with a passenger or other
motorcycle riders.
The SPH10 is compliant with the Bluetooth Specification v2.1+EDR supporting the following
profiles: Headset Profile, Hands-Free Profile (HFP), Advanced Audio Distribution Profile
(A2DP), and Audio Video Remote Control Profile (AVRCP). Please check with the
manufacturers of other devices to determine their compatibility with this headset.
Please read this user’s guide carefully before using the headset. Also check
www.senabluetooth.com/support for the latest version of the user’s guide and additional
information related to SENA Bluetooth products.
The SPH10 features:
Bluetooth hands-free for Bluetooth mobile phones
Bluetooth stereo headset for Bluetooth audio devices such as MP3 players
Bluetooth stereo headset for Bluetooth GPS navigations
Bluetooth Intercom up to 900 meters (980 yards)*
Multi-Pair Bluetooth Intercom for 4 persons
Stereo music by 3.5mm audio cable
Firmware Upgradeable
Key Specifications:
Bluetooth v2.1+EDR, Class1
Supporting profiles: Headset Profile, Hand-Free Profile (HFP), Advanced Audio
Distribution Profile (A2DP), Audio Video Remote Control Profile (AVRCP)
* in open terrain
| SPH10
5
PACKAGE CONTENTS
Headset Main Unit
Jog Dial
Start and End an Intercom Conversation
Volume adjustment by rotating
Play and Pause Bluetooth MP3 player
Track-forward and Track-back by rotating
while pressing the button
Entering into Intercom Pairing Mode
Entering into Voice Activated Intercom Setting
Mode
Reject an incoming mobile phone call
Call Transfer
Phone Button
Making and Answering a mobile phone call
Entering into Mobile Phone Pairing Mode
Entering into Bluetooth Audio Device Pairing
Mode (MP3, GPS navigation)
Entering into Voice Activated Phone
Answering Setting Mode
DC Power Charging & Firmware Upgrade Port
MP3 Jack
Microphone
Status LED
| SPH10
7
WEARING THE SPH10
Microphone Installation
Two microphones are included in the package: a long-boom microphone for high noise
environment and a short microphone for indoor use.
Plug the microphone into the microphone port and turn clockwise until tightened. Adjust the
direction of the long-boom microphone so that the triangular mark on the microphone is
pointing towards your mouth.
Since SPH10 is mostly exposed on external environment where noise prevails, microphone
can be selected according to the noise level. For the highly noisy environment, boom-
microphone is recommended allowing microphone to stay near user’s mouth. For the less-
noisy environment, pin-type microphone is recommended to provide short-length one allowing
users to move freely.
Using Chin Strap
You can use the chin strap to tighten the headset.
| SPH10
8
POWERING ON/OFF AND CHARGING
To power on and off the headset, you don’t need to press and hold any button for several
seconds. Just short press the Jog Dial and the Phone Button simultaneously, and you will get
quick on-and-off convenience.
Powering On
Press the Jog Dial and the Phone Button at the same time for about 1 second to power on.
The blue LED turns on and you will hear ascending beeps.
Powering Off
Just short press the Jog Dial and the Phone Button simultaneously, you don’t need to press
and hold for a few seconds. The red LED turns on for a while until it turns off completely and
you will hear descending beeps.
Charging
The LED turns on red while charging, and turns to blue when the headset is fully charged. It
takes about 2.5 hours to be completely charged.
Low Battery Warning
When the battery is low, the blinking blue LED in stand-by mode turns to red and you will hear
mid-tone triple beeps.
| SPH10
9
PAIRING THE SPH10 WITH BLUETOOTH DEVICES
Before using the SPH10 Bluetooth headset with any of Bluetooth devices for the first time,
you need to do the pairing operation. It can be paired with Bluetooth mobile phones,
Bluetooth audio devices such as MP3 or GPS, and with other SPH10 Bluetooth headsets.
This pairing operation is only required once for each Bluetooth device, and the headset will
remain paired with the devices and automatically connects to the paired devices again when
they are within range.
Mobile Phone Pairing
1. Turn on the headset and press the Phone Button for 5 seconds until the LED flashes red
and blue alternately and you hear multiple beeps.
2. Search for Bluetooth devices on your mobile phone. The headset will be listed on your
mobile phone as SPH10.
3. Enter 0000 for the PIN
4. The headset can be paired as Handsfree or Headset. Handsfree profile is normally
recommended for most mobile phones. If it is paired as Headset, the buttons of the
SPH10 may not work properly.
Bluetooth MP3 Player Pairing
1. The procedure is the same with the procedure of “Mobile Phone Pairing”, except the
SPH10 must be paired as Stereo Headset.
2. If you use a Bluetooth mobile phone and a Bluetooth audio device at the same time,
please make sure to pair as Handsfree or as Headset with the mobile phone and to pair
as Stereo Headset with the Bluetooth audio device.
Bluetooth GPS Navigation Pairing
1. You can listen to Bluetooth voice instructions from a Bluetooth GPS navigation.
2. The paring procedure is the same with the procedure of “Mobile Phone Pairing”, except
the SPH10 could be paired as either Headset or Stereo Headset depending on the
Bluetooth GPS navigation.
3. Please refer to the manual of the Bluetooth GPS navigation for details.
| SPH10
10
PAIRING WITH SELECTIVE PROFILE: A2DP STEREO
OR HANDSFREE
If you have a MP3 stereo music phone such as a smartphone, sometimes you may need to
selectively use the SPH10 for A2DP stereo music only or for mobile phone hands-free only.
This instruction is for advanced users who want to pair the SPH10 to their smartphones only
with one selective profile: A2DP Stereo for music or HFP for phone call.
A2DP Stereo Music Only
1. Turn on the headset and press the Phone Button for 5 seconds until the LED flashes red
and blue alternately and you hear multiple beeps.
2. Within 2 seconds, tap the Jog Dial again, then the LED turns to red flashing and the
beeps turn to double mid-tone beeps.
3. Search for Bluetooth devices on your smartphone. The headset will be listed on your
mobile phone as SPH10.
4. Enter 0000 for the PIN. Some smartphones may not ask for PIN.
HFP for Phone Call Only
1. Turn on the headset and press the Phone Button for 5 seconds until the LED flashes red
and blue alternately and you hear multiple beeps.
2. Within 2 seconds, tap the Phone Button again, then the LED turns to blue flashing and
the beeps turn to multiple mid-tone beeps.
3. Search for Bluetooth devices on your smartphone. The headset will be listed on your
mobile phone as SPH10.
4. Enter 0000 for the PIN. Some smartphones may not ask for PIN.
| SPH10
11
PAIRING WITH OTHER SPH10 HEADSETS FOR
INTERCOM CONVERSATION
The SPH10 can be paired with up to three other headsets for Bluetooth Intercom
conversation.
1. Turn on the two headsets (A and B) that you would like to pair with each other.
2. Press and hold the Jog Dial of the headset A for 5 seconds until red LED starts to flash
rapidly.
3. Press and hold the Jog Dial of the headset B for 5 seconds until red LED starts to flash
rapidly.
4. Simply tap the Jog Dial of any one of the two headset A or B (It doesn’t matter that you
choose A or B) and wait until the LEDs of both headsets turn to blue and intercom
connection is automatically established. (Headset A is paired with Headset B)
Pairing A & B
| SPH10
12
5. You can make other pairings between the headset A and C, and between the headset A
and D by following the same procedure as above. (Headset A is paired with Headset C
and with Headset D)
Pairing A & C Pairing A & D
6. If a headset has multiple paired headsets for intercom conversations, the lastly paired
headset is set as First Intercom Friend. The older Intercom friend goes to be Second
Intercom Friend, and Third Intercom Friend
** For example, after the paring procedures as above, the headset D is the First
Intercom Friend of the headset A, the headset C is the Second Intercom Friend of the
headset A, and the headset B is the Third Intercom Friend of the headset A.
| SPH10
13
USING THE SPH10
Volume Adjustment
You can easily adjust the volume by rotating the Jog Dial. You will hear a beep when the
volume reaches maximum or minimum level. The volume is set and maintained separately at
different levels for each function even when you turn off and on the headset. For example,
once you set the mobile phone conversation volume, it is not changed even if you raise the
volume when you hear Bluetooth MP3 music. So you can always maintain preferred optimum
volume level for each function.
Mobile Phone Call Making and Answering
1. When you have an incoming call, simply tap the Phone Button to answer the call.
2. You can also answer the incoming call by loudly speaking any word of your choice if the
Voice Activated Phone Answering Function of the SPH10 is enabled. (Refer to the
next section for detail)
3. To reject a call, tap the Jog Dial while the phone is ringing.
4. To transfer a call between the mobile phone and the headset, tap the Jog Dial during the
phone conversation. You will hear a short/long beep when the call is transferred to the
phone/headset.
5. There are several ways to make a phone call:
- Enter number on your mobile phone keypad and tap the Phone Button. The call is
automatically transferred to the headset.
- Tap the Phone Button in stand-by mode to activate the voice dialing of your mobile
phone. For this, the voice dialing feature must be available on the mobile phone. Refer to
your mobile phone manual for further instructions.
- To redial the last number, double tap the Phone Button in stand-by mode.
| SPH10
14
Enabling/Disabling Voice Activated Phone Answering (Factory Default:
Disabled)
If this feature is enabled, you can answer incoming calls by simply saying a word loudly
enough. For example, when you hear a series of beeps by an incoming call, you can answer
the phone by saying “Hello” or any other word loudly. The factory default setting is disabled.
You can enable or disable this mode. If this mode is disabled, the only way to answer an
incoming call is to tap the Phone Button.
1. Press and hold the Phone Button for 8 seconds until the red LED is rapidly flashing.
When you do this, after first 5 seconds you press the button, you will see the headset
enters into the Mobile Phone Pairing sequence, but you have to keep pressing the
button for another 3 seconds until the red LED flashes rapidly.
2. To enable, tap the Phone Button, then the LED shows solid blue for 2 seconds and you
will hear double beeps.
3. To disable, tap the Jog Dial, then the LED shows solid red for 2 seconds and you will
hear a single beep.
Intercom Conversation
1. You can start an intercom conversation with any of Intercom Friends by tapping the Jog
Dial: single tapping to intercom with the First Intercom Friend, double tapping with the
Second Intercom Friend, and triple tapping with the Third Intercom Friend.
| SPH10
15
2. To terminate an intercom conversation, single tap the Jog Dial. Any intercom connection
with any Intercom Friend will be terminated by a single tapping. A double or triple tapping
will do nothing in this case.
3-Way Conference Intercom
You (A) could have a 3-way conference intercom with 2 other SMH10 friends (B & C) by
establishing two intercom connections at the same time. While the conference intercom is in
progress, you can also maintain Bluetooth connections with several Bluetooth devices: mobile
phone, GPS and A2DP stereo music player.
1. Start an intercom conversation with other SMH10 friends by tapping the Jog Dial. For
example, you (A) may start an intercom conversation with the First Intercom Friend (B)
by single tapping the Jog Dial.
2. While maintaining the active intercom conversation with Intercom Friend B, make
another intercom call to the Second Intercom Friend (C) by double tapping the Jog Dial,
or you may receive an intercom call from the Second Intercom Friend (C).
3. Now you (A) and two SMH10 Intercom Friends (B & C ) are having a 3-way conference
intercom.
| SPH10
16
Thanks to the 3-way conference intercom feature, you could make and receive another
intercom call even while you are already having an intercom conversation.
All three participants (A, B & C) could receive Bluetooth mobile phone calls even while the
conference intercom is in progress.
4-Way Conference Intercom
A 4-way conference intercom conversation can be established by adding one more participant
to a 3-way conference intercom.
1. In the above case of 3-way conference intercom, another participant D who is an Intercom
Friend of (C), could join the conference intercom by establishing a new intercom
connection with your Second Intercom Friend (C) and form a 4-way conference intercom.
2. To do this, (C) has to make an intercom call to (D) or receive an intercom call from (D),
while having a 3-way intercom.
The rule of thumb of conference intercom is that one can have two active intercom
connections at the same time.
All four participants (A, B, C & D) can receive Bluetooth mobile phone calls even while the
conference intercom is in progress.
| SPH10
17
Multi-User Conference Intercom
A group of more than four riders can have multi-user conference intercom by a similar method
of having two intercom connections at the same time. For example, in the above case of 4-
way conference intercom, B & D could have one more intercom connection each because
both are at the open end of the intercom chain. It means that both B & D are having only one
intercom connection at the moment. If B or D has one more intercom connection with
someone else, they will form a 5-way conference intercom, and if both have one more each,
they will have 6-way conference intercom all together.
Terminating Conference Intercom
When you are a member of an active conference intercom, you can completely get out of the
conference intercom or just terminate an intercom connection with one of your active Intercom
Friends.
1. With a 1 second press-and-hold of the Jog Dial, you can get out of the conference
intercom completely. It terminates both of the two active intercom connections: one with(B)
and one with (C).
By single or double tapping the Jog Dial, you can terminate the intercom connection with one
of the two connected Intercom Friends accordingly. For example, by single tapping the Jog
Dial, you can just terminate the intercom connection with your First Intercom Friend, (B).
However, you still have the intercom connection with your Second Intercom Friend, (C).
Enabling/Disabling Voice Activated Intercom (Factory Default: Disabled)
If this feature is enabled, you can initiate an intercom conversation with the last connected
Intercom Friend by speaking any word loudly enough. The most effortless way to trigger
intercom VOX is to blow into the microphone as if blowing dust off the microphone. If you start
an intercom conversation by VOX, the intercom terminates automatically when you and your
Intercom Friend remain silent for 20 seconds. However, if you manually start an intercom
conversation by tapping the Jog Dial, you have to terminate the intercom conversation
| SPH10
18
manually by tapping the Jog Dial again.
If this feature is disabled, the only way to initiate and terminate an intercom conversation is to
tap the Jog Dial.
1. Press and hold the Jog Dial for 8 seconds until the red LED turns on solidly. When you
do this, after first 5 seconds you press the Jog Dial, you will see the headset enters into
the Intercom Pairing sequence, but you have to keep pressing the Jog Dial for another 3
seconds until the LED turns to solid red.
2. To enable, tap the Jog Dial, then the blue LED flashes for 2 seconds and you will hear
double beeps.
3. To disable, tap the Phone button, then the red LED flashes for 2 seconds and you will
hear a single beep.
| SPH10
19
Tip:
The Jog Dial is for any kind of Intercom related function, and the Phone Button is for any
functions of mobile phone. With this reason, as far as intercom function is concerned, the Jog
Dial is used for a positive manner of action such as enabling, and the Phone Button is for a
negative manner of action such as disabling. Vice versa for the mobile phone functions.
Intercom Failure
When you try to start an intercom conversation with an Intercom Friend who is already having
an intercom conversation with other Intercom Friend or a mobile phone call with another
person, you will hear a low tone double beep signifying a busy signal. In this case, you have
to try again later. On the other hand, the Intercom Friend will hear a high tone double beep
alerting them that there is an incoming intercom call.
Intercom Reconnection
If your Intercom Friend goes out of range while having an intercom conversation, you may
hear static noise and eventually the intercom will be disconnected. In this case, the SPH10
automatically tries to reconnect the intercom every 8 seconds and you will hear high tone
double beeps until the intercom is reestablished. If you don’t want to make a reconnection,
tap the Jog Dial to stop the attempt.
Stereo Music
You can listen to stereo music in either way: with the enclosed stereo audio cable or by
Bluetooth wireless stereo.
1. By Stereo Audio Cable
Plug your stereo MP3 player directly to the SPH10 by using the enclosed 3.5mm stereo
audio jack cable. To adjust the volume, rotate the Jog Dial on the headset. You may
adjust the volume on the MP3 player also.
| SPH10
20
2. By Bluetooth Wireless Stereo
The Bluetooth audio device must be paired with the SPH10 by following the Bluetooth
Audio Device Pairing instructions described in the previous chapter. The SPH10
supports the Audio/Video Remote Control Profile (AVRCP), so if your Bluetooth audio
device also supports the AVRCP, you can use the SPH10 to remotely control music
playback. So, you may not only adjust the volume but also use the functions such as play,
pause, next track and previous track.
To adjust the volume, rotate the Jog Dial.
To play or pause music, press and hold the Jog Dial for 1 second until you hear a
beep.
To track forward or track back, rotate while pressing the Jog Dial clockwise or
counter clockwise.
| SPH10
21
Function Priority
The SPH10 operates in the following order of priority:
(highest) Mobile phone,
Intercom,
Stereo music by audio cable, and
(lowest) Bluetooth stereo music
A lower priority function is always interrupted by a higher priority function. For example, stereo
music is interrupted by intercom call, and intercom conversation is interrupted by incoming
mobile phone call.
Tip: Stereo Music by Bluetooth or 3.5mm audio cable
Bluetooth music is available only when the MP3 jack port remains open. Please make sure
the audio cable is unplugged from the clamp unit to play music by Bluetooth.
Reset to Factory Default Settings
1. To restore the SPH10 to factory default settings, press and hold the Phone Button for 12
seconds until the LED shows solid red and you hear double beeps.
2. Then within 5 seconds, press the Jog Dial to confirm reset. The headset will be restored
to factory setting and switched off automatically.
3. If you don’t press the Jog Dial within 5 seconds, the reset attempt is canceled and the
headset returns to stand-by mode.
Fault Reset
When the SPH10 is not working properly or is in faulty status with any reason, you may reset
by pushing the pin-hole reset button at the back of the headset main unit. Insert a paper clip
| SPH10
22
into the reset pin-hole and press the reset button for a second with light pressure. The SPH10
will be switched off and you have to turn on and try to use again. However, this will not restore
the headset to factory default settings.
| SPH10
23
FIRMWARE UPGRADE
The SMH10 supports firmware upgrade function. Please visit SENA Bluetooth web site
www.SenaBluetooth.com/supports/download to check the latest software downloads.
| SPH10
24
PERATION QUICK REFERENCE
Button Description Duration LED Beep
Phone
Button +
Jog Dial
Power-on 1 sec Solid blue Ascending beeps
Power-off Tapping Solid red Descending beeps
Phone
Button
Mobile phone pairing 5 sec Blue & red
alternatively
flashing
High-tone multiple
beeps
MP3, GPS pairing 5 sec Blue & red
alternatively
flashing
High-tone multiple
beeps
Voice activated
phone answering
setting
8 sec red flashing Mid-tone single beep
Phone Button to enable
Jog Dial to disable
Factory reset 12 sec Solid red High-tone double
beeps
Jog Dial within 5 sec to confirm reset
Make & answer
phone call Tapping - -
Jog Dial
Intercom pairing 5 sec Red flashing Double-tone beeps
Jog Dial of any one of the two headsets
Voice activated
intercom setting
8 sec Solid red Mid-tone single beep
Jog Dial to enable
Phone Button to disable
Start/end intercom
conversation Tapping - -
Reject incoming call Tapping - -
Call transfer Tapping High-tone short/long
beep
Volume adjustment Rotating - -
Track forward/ back Rotating w/
pressing - -
Play/pause Bluetooth
music 1 sec - Mid-tone single beep
| SPH10
25
BATTERY INFORMATION
The SPH10 has an internal, non-removable, rechargeable battery. Do not attempt to remove
the battery from the device as you may damage the device. The battery can be charged and
discharged hundreds of times, but it will eventually wear out. Recharge the battery only with
SENA approved chargers designated for this device. Use of an unapproved charger may
present a risk of fire, explosion, leakage, or other hazard.
Always try to keep the battery between 15℃ and 25℃ (59℉ and 77℉). Extreme
temperatures reduce the capacity and lifetime of the battery. A device with a hot or cold
battery may not work temporarily. Battery performance is particularly limited in temperatures
well below freezing.
Do not dispose of batteries in a fire as they may explode. Batteries may also explode if
damaged. Never use any charger that is damaged. Operating times are estimates only and
depend on the devices used together, features used, battery age and condition, temperatures
to which battery is exposed, and many other factors.
| SPH10
26
MAINTENANCE AND CARE
The SHM10 should be treated with care and the following suggestions will help you protect
your warranty coverage.
1. Do not use or store the device in dusty, dirty areas. Its moving parts and electronic
components can be damaged.
2. Do not store the device in hot areas. High temperatures can shorten the life of electronic
devices, damage batteries, and wrap or melt certain plastics.
3. Do not store the device in cold areas. When the device returns to its normal temperature,
moisture can form inside the device and damage electronic circuit boards.
4. Do not attempt to open the SPH10
5. Do not drop or knock the device. Rough handling can break internal circuit boards and
fine mechanics.
6. Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device.
7. Do not paint the device. Paint can clog the moving parts and prevent proper operation.
These suggestions apply equally to the headset main unit, speaker-microphone clamp unit, or
power charger.
| SPH10
27
DISPOSAL
The crossed-out wheel bin symbol on the product, literature, or packaging
reminds you that all electrical and electronic products, batteries, and
accumulators must be taken to separate collection at the end of their working
life. This requirement applies to the European Union and other locations where
separate collection systems are available. To prevent possible harm to the environment or
human health from uncontrolled waste disposal, please do not dispose of these products as
unsorted municipal waste, but hand it in at an official collection point for recycling.
| SPH10
28
CERTIFICATION AND SAFETY APPROVALS
FCC Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC RF Exposure Statement
The antenna(s) used for this device must be installed to provide a separation distance of at
least 20 cm from all persons and must not be co-located or operating in conjunction with any
other antenna or transmitter.
FCC Caution
Any changes or modifications to the equipment not expressly approved by the party
responsible for compliance could void user’s authority to operate the equipment.
| SPH10
30
WAIVER AND GENERAL RELEASE
By using the SPH10 you will waive substantial legal rights including the right to sue. Please
read the following carefully before using the device. If you do not accept all terms of this
agreement, you should immediately return the product for a full refund. By using the headset
you agree to be bound to this agreement and forfeit the right to sue. Using a communication
device while riding a motorcycle, scooter, moped, ATV, quad-bike or any other vehicle or
equipment, whether on land, water or air (jointly referred to as “Vehicle”) requires your
complete and undivided attention. SENA Technologies, Inc., including its Officers, Directors,
Affiliates, Parent Company, Representatives, Agents, Contractors, Sponsors, Employees,
Suppliers and Resellers (jointly referred to as the “Company” or “SENA”) strongly advises you
to take all necessary precautions and remain alert to the traffic, weather and road conditions if
you choose to use the SPH10 headset, including all derivative models irrespective of its
commercial name or branding (the “Device”), and stop your Vehicle on the roadside prior to
initiating or receiving calls. Any publications, advertisements, announcements or similar notes
that refer to using the Device while riding a Vehicle are solely intended to address its technical
capabilities and should not be misconstrued as if encouraging users to operate the Device
while actively involved in traffic.
By way of purchasing this Device and not returning it for a full refund (see below), you are
irrevocably releasing, indemnifying from any liability, loss, claim and expense (including
attorneys fees) and holding SENA harmless for any bodily injuries, harm or death as well as
losses or damages in goods, to any Vehicles including your own, or to any property or asset
that belong to you or to third parties, any of which may result from using the Device under any
circumstances or conditions and irrespective of jurisdiction. SENA will not be responsible for
any physical damages, irrespective of reasons, conditions or circumstances, including
malfunctioning of the Device, and all risks associated with operating it rest solely and entirely
with the user of this Device, irrespective of whether the Device is used by the original
purchaser or any third party.
SENA hereby notifies you that using this Device may also be in contravention to local, federal,
state or national laws or regulations, and that any use of the Device is entirely at your sole risk
and responsibility.
1. You, your heirs, legal representatives, successors or assigns, hereby voluntarily and
forever release, discharge, indemnify and hold harmless SENA from any and all litigation,
claims, debts, demands, actions and liability which may arise, directly or indirectly, from
using the Device for any distress, pain, suffering, discomfort, loss, injury, death,
| SPH10
31
damages to or in respect to any person or property however caused, WHETHER
ARISING FROM THE NEGLIGENCE OR OTHERWISE, and which may hereafter accrue
to you on some future date as a result of said use, to the fullest extent permitted by law.
2. You fully understand and assume the risks in using the Device, including risk of negligent
acts or omissions by others.
3. You confirm that you are physically capable to use the Device and that you have no
medical conditions or needs that may infringe upon your abilities to do so in a safe
manner. You confirm that you are at least eighteen (18) years of age and that you have
been advised of the risks associated with the use of the Device. You further confirm that
you will not consume any alcohol that may affect your alertness or any mind-altering
substance, and will not carry, use or consume these substances before or during the use
of the Device.
4. You fully acknowledge our warnings and understand that: (a) risks and dangers exist in
using the Device while in traffic, including but not limited to injury or illness, strains,
fractures, partial and/or total paralysis, death or other ailments that could cause serious
disability; (b) these risks and dangers may be caused by the negligence of the
manufacturers or its agents or any third party involved in designing or manufacturing the
Device; (c) these risks and dangers may arise from foreseeable or unforeseeable causes.
You hereby assume all risks and dangers and all responsibility for any losses and/or
damages, whether caused in whole or in part by the negligence or other conduct of
others, including the Company.
5. You confirm that you have read this release of liability and fully understand its terms and
that you have given up substantial rights by not returning the Device for a full refund (see
refund option below).
| SPH10
32
Two-Year Limited Warranty
Sena Technologies, Inc. (“SENA”) warrants that this product (“Product”) shall conform to and
perform in accordance with published technical specifications and the accompanying written
materials, and shall be free of defects in materials and workmanship, for a period of two (2)
year from the date of purchase by the first consumer purchaser of the Product. The limited
warranty extends only to the original consumer purchaser of the Product and is not
assignable or transferable to any subsequent purchaser/end-user.
This warranty is limited to the repair and/or replacement, at SENA’s discretion, of defective or
non-conforming Product, and SENA shall not be responsible for the failure of the Product to
perform specified functions, or any other non- conformance caused by or attributable to: (a)
any misapplication or misuse of the Product; (b) failure of Customer to adhere to any of
SENA’s specifications or instructions; (c) neglect of, abuse of, or accident to, the Product; or
(d) any associated or complementary equipment or software not furnished by SENA.
Limited warranty service may be obtained by delivering the Product to SENA or to the
international distributor it was purchased through and providing proof of purchase or receipt
date. Customer agrees to insure the Product or assume the risk of loss or damage in transit,
to prepay shipping charges to SENA, and to use the original shipping container or equivalent.
Limitation of Liability
EXCEPT AS EXPRESSLY PROVIDED HEREIN, SENA MAKES NO WARRANTY OF ANY
KIND, EXPRESSED OR IMPLIED, WITH RESPECT TO ANY EQUIPMENT, PARTS OR
SERVICES PROVIDED PURSUANT TO THIS AGREEMENT, INCLUDING BUT NOT
LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. NEITHER SENA NOR ITS DEALER SHALL BE LIABLE FOR ANY
OTHER DAMAGES, INCLUDING BUT NOT LIMITED TO DIRECT, INDIRECT, INCIDENTAL,
SPECIAL OR CONSEQUENTIAL DAMAGES, WHETHER IN AN ACTION IN CONTRACT OR
TORT (INCLUDING NEGLIGENCE AND STRICT LIABILITY), SUCH AS, BUT NOT LIMITED
TO, LOSS OF ANTICIPATED PROFITS OR BENEFITS RESULTING FROM, OR ARISING
OUT OF, OR IN CONNECTION WITH THE USE OF FURNISHING OF EQUIPMENT, PARTS
OR SERVICES HEREUNDER OR THE PERFORMANCE, USE OR INABILITY TO USE THE
SAME, EVEN IF SENA OR ITS DEALER HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. IN NO EVENT WILL SENA OR ITS DEALERS TOTAL LIABILITY
EXCEED THE PRICE PAID FOR THE PRODUCT.
| SPH10
33
Return for Full Refund
IF YOU ARE UNWILLING TO ACCEPT AND AGREE TO THE ABOVE CONDITIONS, YOU
MAY RETURN THIS DEVICE TO SENA FOR A FULL REFUND, PROVIDED THAT YOU DO
SO NO LATER THAN 14 BUSINESS DAYS FOLLOWING THE PURCHASE OF THE
DEVICE AND SUBJECT TO THE WRAPPING BEING INTACT. WHEN DOING SO, PLEASE
REFER TO THIS SECTION. BY NOT RETURNING THE DEVICE FOR REFUND WITHIN
THE PERIOD PROVIDED, YOU ARE EXPLICITLY IN AGREEMENT WITH THE ABOVE AND
RENOUNCE ALL RIGHTS TO FUTURE CLAIMS AND DEMANDS AGAINST SENA AS
DEFINED ABOVE.
| SPH10
34
WARNING
SENA informs that using this device in public traffic may not be authorized by the law. Please
check your local law and use this device only out of public traffic such as private properties or
closed circuits. If the simultaneous use of both ear speakers while riding a motorcycle is
prohibited by your local law, please use only a single ear speaker while riding. SENA denies
any liability should you choose not to respect this warning.
Using the headset with loud volume may be harmful to your eardrums and cause hearing loss.
Please maintain proper volume level to protect your ears.
| SPH10
35
SENA www.senabluetooth.com v2.0.0 Users Guide