SENA TECHNOLOGIES SP13 BLUETOOTH STEREO MOTORCYCLE HEADSET User Manual 10R OEM 01 Manual ENG rev2

Sena Technologies,Inc. BLUETOOTH STEREO MOTORCYCLE HEADSET 10R OEM 01 Manual ENG rev2

UserManual.wiki >

SENA TECHNOLOGIES >

SP13 User Manual >

Contents

1. Users Manual
2. User Manual

Users Manual

1 SENA TECHNOLOGY 10R-OEM-01 User’s Manual

2 CONTENTS 1. INTRODUCTION 2. PACKAGE CONTENTS 3. 10R-OEM-01 CONFIGURATION SETTING 4. OPERATION QUICK REFERENCE 5. FM RADIO

4 2. PACKAGE CONTENTS Headset Main Unit (+) Button / (-) Button ● Volume adjustment ● Navigate through voice configuration menu ● MP3 Track-forward and track-back Center Button ● Answer and end a mobile phone call ● Reject an incoming mobile phone call ● Start and end intercom conversation ● Play and pause Bluetooth stereo device ● Enter into intercom pairing mode ● Enter into voice configuration menu DC Power Charging & Firmware Upgrade Port Charging LED Speaker Connector Battery Pack Connector Microphone Connector

5 3. 10R-OEM-01 CONFIGURATION SETTING You can set the configuration of the 10R-OEM-01 by the voice menu instruction as below. 1. To enter into voice configuration menu, press and hold the Center Button for 12 seconds until the LED shows solid blue and you hear high tone double beeps. You will also hear a voice prompt saying “Configuration menu”. 2. Tap the (+) Button or (-) Button to navigate between the menus. You will hear voice prompts for each menu items as below. 3. You can enable the feature or execute the command by tapping the Center Button. 4. If you want to exit the configuration immediately, tap the (+) Button or (-) Button until you hear a voice prompt saying “Exit configuration”, then tap the Center Button. The voice prompt for each menu item is as below: (1) Phone pairing (2) Multipoint pairing (3) Phone selective pairing (4) Media selective pairing (5) Speed dial (6) VOX phone (7) VOX intercom (8) VOX sensitivity (9) Voice prompt (10) Sidetone (11) Delete all pairings (12) Factory reset (13) Exit configuration

6 10R-OEM-01 Accessory Ear piece MIC Battery Controller Charge USB Port

7 4. OPERATION QUICK REFERENCE Type Description Button Duration LED BeepBasic Function Power-on Center Button+ (+) Button 1 sec Solid blue Ascending beeps Power-off Center Button+ (+) Button Tapping Solid red Descending beeps Volume adjustment (+) Button or (-) Button Tapping - - Mobile Phone Answer phone call Center Button Tapping - - Speed dial (+) Button 3 sec - Mid-tone single beep Reject incoming call Center Button 2 sec - - Intercom Intercom pairing Center Button 5 sec Red flashing Mid-tone single beep Center Button of any one of the two headsets 5 sec Red flashing Mid-tone single beep Universal intercom pairing Center Button 8 sec Blue flashing - Start/end intercom conversation Center Button Tapping - - End conference intercom Center Button 1 sec Blue flashing Mid-tone single beep Music Play/pause Bluetooth music Center Button 1 sec - Mid-tone double beep Track forward/back (+) Button or (-) Button 1 sec - -

8 5. FM RADIO You can answer the incoming call and intercom while still listening to the FM radio. FM Radio On / Off To turn on the FM radio, press and hold the Phone Button for 2 seconds until you hear a mid-tone double beep sound. You will then hear a voice prompt saying “FM on”. In order to turn off the FM radio, press and hold the Phone Button for 2 seconds until you hear a voice prompt saying “FM off”. When you power off, the SMH5-FM will remember the last station frequency. When you power on, the last station frequency will be playing. Preset Stations You can listen to preset stations while listening to the FM radio. Tap the phone button once to go upward to your next saved preset station. Seek and Save “Seek” is the function that searches from station to station frequencies. To use the “Seek” function, please follow the procedure below: 1. Rotate while pressing the Jog Dial clockwise to search up the station dial or counter clockwise to search down the station dial. 2. If the tuner finds a station while searching frequencies, it stops the seek function. 3. To save the current station, press and hold the Jog Dial for 2 seconds until you hear a voice prompt saying “Preset (#)?” 4. Rotate the Jog Dial clockwise or counter clockwise, in order to select which preset number you want for that specific station, up to 10 preset stations. You may cancel the preset operation by waiting approximately 10 seconds. You will then hear “Save preset cancelled”. You can also rotate the Jog Dial clockwise or counter clockwise until you hear “Cancel”. Tap the Jog Dial to confirm cancellation. You will then hear “Save preset cancelled”. 5. To save the current station, tap the Jog Dial again. You will then hear a voice prompt saying “Save preset (#)”. 6. To delete the saved station in the preset number, tap the Phone Button. You will then hear a voice prompt saying “ Delete preset (#)”.

9 FCC Information to User This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is con-nected. • Consult the dealer or an experienced radio/TV technician for help. Caution Modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC Compliance Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation Antenna installation and requirement The antenna can not be replaced by the user for the device that must be professionally installed. However, the installer shall be responsible for ensuring that the proper antenna is employed so that the limits in Part 15 are not exceeded.

10 IMPORTANT NOTE: FCC RF Radiation Exposure Statement: This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 1 centimeter between the radiator and your body.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. “This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.”