SENA TECHNOLOGIES SP23 Motorcycle Bluetooth Communication System User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2650575
Application ID	+g/pKCWqoVlE6MSGj5GVmQ==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	66.83kB (835431 bits)
Date Submitted	2015-06-17 00:00:00
Date Available	2015-12-14 00:00:00
Creation Date	2015-06-02 18:58:17
Producing Software	Microsoft® Word 2010
Document Lastmod	2015-06-02 18:58:17
Document Title	Users Manual
Document Creator	Microsoft® Word 2010
Document Author:	i

10R
Low Profile Motorcycle Bluetooth Communication System
© 1998-2015 Sena Technologies, Inc. All rights reserved.
Sena Technologies, Inc reserves the right to make any changes and improvements to its product without providing prior
notice.
Sena™ is a trademark of Sena Technologies, Inc. or its subsidiaries in the USA and other countries. 10R™, 10U™, 10C™, Prism™,
20S™, Snowtalk™, 3S™, SMH10™, SMH5™, SMH5-FM™, SPH10™, SPH10H™, SPH10H-FM™, SMH10R™, SPH10S™, SPH10H™,
®
SR10™, SR10i™, SM10™, EXPAND™, Bluetooth Pack for GoPro are trademarks of Sena Technologies, Inc. or its subsidiaries. These
trademarks may not be used without the express permission of Sena.
®
GoPro is a registered trademark of Woodman Labs of San Mateo, California. Sena Technologies, Inc. (“Sena”) is not affiliated with
Woodman Labs. The Sena Bluetooth Pack for GoPro® is an after-market accessory specially designed and manufactured by Sena
Technologies, Inc. for the GoPro® Hero3 allowing for Bluetooth capabilities.
The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sena is under license. iPhone,
iPod touch are registered trademarks of Apple Inc. Zumo™ is a trademark of Garmin Ltd. or its subsidiaries. TomTom™ is the trademark or
registered trademark owned by TomTom International B.V. Other trademarks and tradenames are those of their respective owners.
CONTENTS
1 INTRODUCTION
2 PACKAGE CONTENTS
3 INSTALLING THE 10R ON YOUR HELMET
4 GETTING STARTED
4.1 Button Operation
4.2 Powering On and Off
4.3 Charging
4.4 Checking the Battery Level
4.4.1 LED Indicator
4.4.2 Voice Prompt Indicator
4.5 Volume Adjustment
4.6 Sena Softwares
4.6.1 Sena Device Manager
4.6.2 Sena Smartphone App
5 PAIRING THE 10R WITH BLUETOOTH DEVICES
5.1 Mobile Phone Pairing - Mobile Phone, Bluetooth Stereo Device
5.2 Second Mobile Phone Pairing - Second Mobile Phone, GPS, and SR10
5.3 Advanced Selective Pairing: A2DP Stereo or Handsfree
5.3.1 A2DP Stereo Music Only
5.3.2 HFP for Phone Call Only
5.4 Intercom Pairing
5.4.1 Pairing with Other 10R Headsets for Intercom Conversation
5.4.2 Pairing with Other Sena Headset Models for Intercom Conversation
6 MOBILE PHONE, GPS, SR10
6.1 Mobile Phone Call Making and Answering
6.2 Speed Dialing
6.3 GPS Navigation
6.4 Sena SR10, Two-Way Radio Adapter
7 STEREO MUSIC
7.1 Bluetooth Stereo Music
7.2 Music Sharing
8 INTERCOM
8.1 Two-way Intercom
8.1.1 Starting Two-way Intercom
8.1.2 Ending Two-way Intercom
8.2 Three-way Intercom
8.2.1 Starting Three-way Intercom
8.2.2 Ending Three-way Intercom
8.3 Four-way Intercom
8.3.1 Starting Four-way Intercom
8.3.2 Ending Four-way Intercom
9 THREE-WAY CONFERENCE PHONE CALL WITH INTERCOM PARTICIPANT
10 UNIVERSAL INTERCOM
10.1 Universal Intercom Pairing
10.2 Two-way Universal Intercom
10.3 Three-way Universal Intercom
10.4 Four-way Universal Intercom
10.4.1 Four-way Universal Intercom Case 1
10.4.2 Four-way Universal Intercom Case 2
11 FM RADIO
11.1 FM Radio On/Off
11.2 Preset Stations
11.3 Seek and Save
11.4 Scan and Save
11.5 Temporary Preset
11.6 Region Selection
12 FUNCTION PRIORITY
13 CONFIGURATION SETTING
13.1 Mobile Phone Pairing
13.2 Second Mobile Phone Pairing
13.3 Phone Selective Pairing
13.4 Media Selective Pairing
13.5 Assigning Speed Dial
13.6 Enabling/Disabling Audio Boost
13.7 Enabling/Disabling Voice Activated Phone Answering
13.8 Enabling/Disabling Voice Activated Intercom
13.9 Setting Intercom Vox Sensitivity
13.10 Enabling/Disabling Voice Prompts
13.11 Enabling/Disabling RDS AF
13.12 Enabling/Disabling Sidetone
13.13 Enabling/Disabling Advanced Noise Control™
13.14 Delete All Bluetooth Pairing Information
13.15 Remote Control Pairing
13.16 Factory Reset
13.17 Exit Voice Configuration Menu
14 FIRMWARE UPGRADE
15 TROUBLESHOOTING
15.1 Intercom Failure
15.2 Intercom Reconnection
15.3 Fault Reset
15.4 Factory Reset
16 OPERATION QUICK REFERENCE
CERTIFICATION AND SAFETY APPROVALS
FCC Compliance Statement
FCC RF Exposure Statement
FCC Caution
CE Declaration of Conformity
Industry Canada Statement
Bluetooth License
WEEE (Waste Electrical and Electronic Equipment)
SAFETY INFORMATION
Product Storage and Management
Product Use
Battery
PRODUCT WARRANTY AND DISCLAIMER
Limited Warranty
Warranty Exclusions
Reasons for Limited Liabilities
Limitation of Liability
Liabilities Disclaimer
Warranty Service
Free-of-charge Service
Charged Service
Return for Full Refund
1 INTRODUCTION
Thank you for choosing the Sena 10R, Low Profile Bluetooth Stereo Headset and Intercom. With the 10R, you can call
handsfree on your Bluetooth mobile phone, listen to stereo music or voice instructions of GPS navigations wirelessly, and
have intercom conversations in full duplex with a passenger or other motorcycle riders.
The 10R is compliant with the Bluetooth 4.1 supporting the following profiles: Headset Profile, Hands-Free Profile (HFP),
Advanced Audio Distribution Profile (A2DP), and Audio Video Remote Control Profile (AVRCP). Please check with the
manufacturers of other device to determine their compatibility with this headset.
Please read this User’s Guide carefully before using the headset. Also check www.sena.com for the latest version of the
User’s Guide and additional information related to Sena Bluetooth products.
The 10R features:
메모 [1]: 검토-결정
●
Light weight and ultra slim profile
●
Bluetooth intercom up to 900 meters (980 yards)
●
Four-way intercom
●
Three-way conference phone call with intercom participant
●
Universal Intercom™
●
Bluetooth handsfree for Bluetooth mobile phones
●
Bluetooth stereo headset for Bluetooth audio devices such as MP3 players
●
Bluetooth stereo headset for Bluetooth GPS navigation
●
Speed Dialing
●
Sidetone
●
Advanced Noise Control™
●
Firmware upgradeable
* in open terrain
--------------------------------Key Specifications:
●
Bluetooth 4.1
●
Supporting profiles: Headset Profile, Hands-Free Profile (HFP), Advanced Audio Distribution Profile (A2DP), and
Audio Video Remote Control Profile (AVRCP).
2 PACKAGE CONTENTS
●
Headset Main Unit
●
Speakers
●
Attachable Boom Microphone
●
Wired Microphone
●
Battery Pack*
●
Battery Pack Holder
●
Speaker Pads
●
Velcro Pad for Boom Microphone
●
Velcro Pads for Speakers
●
Velcro Pad for Wired Microphone
●
Double Sided Adhesive Tapes for Battery Pack Holder
●
Velcro Pads for Main Unit
●
Double Sided Adhesive Tapes for Main Unit
●
Microphone Sponges
●
USB Power & Data Cable
●
Cigarette Charger
------------------------------------------------------------------------●
Optional Accessory - Battery pack (SC-A0301)
You can purchase an additional battery pack for replacement
3 INSTALLING THE 10R ON YOUR HELMET
메모 [2]: 스피커는 좌,우
분리되었음. 변경요
To securely install the main unit of the 10R, you can use the velcro pad or double sided adhesive tape. Please follow the
procedure below.
1. Peel off the cover of the adhesive tape of the velcro pad and attach it on the back plate of the main unit.
2. Locate a suitable surface on your helmet to attach the unit, clean the location with a moistened towel, and allow to dry
thoroughly.
3. Peel off the cover of the adhesive tape on the velcro pad and attach the pad on the left side of your helmet.
4. Attach the main unit to the velcro pad of your helmet.
5. You can also use double sided adhesive tape. Peel off the cover of the double sided adhesive tape and attach it to
the back plate of the main unit. Then do the step 2 and peel off the other side cover of the adhesive tape and attach
the main unit on the left side of your helmet.
6. Place the speakers in the helmet along with the velcro pads, centered to your ear, in the ear pockets of the helmet. If
the helmet has deep ear pockets, you can use the speaker pads to place the speakers closer to your ears. Attach the
speaker connector to the 4 pin connector of the main unit cable.
7. There are two types of microphone that can be installed in your helmet. In the case of the attachable boom
microphone, place the velcro end of the boom microphone between the internal helmet cheek pad and the internal
wall of the helmet shell and attach the microphone connector to the 2 pin connector of the main unit cable. The boom
microphone should be mounted so it is positioned close to your mouth when you are wearing the helmet. In the case
of the wired microphone, attach the velcro pad for the wired microphone to the inside of the chin guard for full -face
helmets. Place the wired microphone on the velcro pad and attach the microphone connector to the 2 pin connector
of the main unit cable.
8. Attach the double sided tape to the battery pack holder in the same manner as the main unit. Insert the battery pack
down in the battery pack holder until you feel the click that signals a secure attachment. Attach the battery connector
to the 2 pin connector of the main unit cable. To get rid of the battery pack from the battery pack holder, push the
battery pack upward.
4 GETTING STARTED
4.1 Button Operation
The 10R is mainly controlled by the Bluetooth Handlebar Remote. The two are paired from the factory and are ready for
immediate use. If the Handlebar Remote runs out of battery, you can use the control buttons on the headset to operate all
functions.
10R Headset Buttons
Front Button
●
●
●
●
●
Enter into intercom pairing mode
Start and end intercom conversation
Answer and end a mobile phone call
Reject an incoming mobile phone call
Enter into voice configuration setting
Joystick
●
●
●
●
●
●
Enter into mobile phone pairing mode
Volume adjustment
Play and pause Bluetooth stereo device
Track forward and track back music
Navigate through configuration menu
Seek FM radio station
Rear Button
● Answer and end a mobile phone call
●
●
Speed Dial
Turn on/off FM tuner
4.2 Powering On and Off
4.2.1 Headset
To power on the headset, press the Center Button and the (+) Button at the same time while hearing ascending beeps and a
voice prompt, “Hello”. To power off the headset, press the Center Button and the (+) Button at the same time while hearing
descending beeps and a voice prompt, “Goodbye”.
4.2.2 Handlebar Remote
To power on the device, tap the Front Button and the blue LED will appear. To power off the device, press and hold the Front
Button and the Joystick for two seconds until red LED blinks.
4.3 Charging
You can charge the headset and the Handlebar Remote by connecting the supplied USB power & data cable into a
computer’s USB port or USB wall charger. You can use any standard micro USB cable to charge the units. You can also
charge them on the road using the cigarette charger. The charging LED turns red while charging and turns blue when fully
charged. It takes about 2.5 hours to be completely charged.
Note:
If you purchase the battery pack, sold separately, you can use the 2-Pin connector to Micro-USB Adapter for charging the
10R. You should connect the USB power & data cable first to the 2-Pin Connector to Micro-USB Adapter and then to the
battery pack in series.
4.4 Checking the Battery Level
4.4.1 LED Indicator
When the headset or the Handlebar Remote is powering on, their red LED flashes rapidly indicating the battery level.
4 flashes = High, 70~100%
3 flashes = Medium, 30~70%
2 flashes = Low, 0~30%
4.4.2 Voice Prompt Indicator
When you power on the headset, keep pressing the Center Button and the (+) Button simultaneously for about 3 seconds
until you hear three, high toned beeps. Then you will hear a voice prompt indicating the battery level. However, if you release
the buttons as soon as the headset turns on, you will not hear the voice prompt for the battery level indication.
4.5 Volume Adjustment
You can easily adjust the volume by moving the Joystick up or down. You will hear a beep when the volume reaches the
maximum or minimum level. The volume is set and maintained independently at different levels for each audio source even
when you reboot the headset. For example, once you set the volume for mobile phone handsfree, it will not change even if
you adjust the volume for your Bluetooth MP3 music. However, if you adjust the volume during stand-by mode, it will affect
volume levels of every audio source.
Function
Volume up
Volume down
Handlebar Remote
Headset
Move the Joystick up
Tap the (+) Button
Move the Joystick down
Tap the (-) Button
Button Operation Table for Volume Adjustment
4.6 Sena Softwares
4.6.1 Sena Device Manager
The Sena Device Manager allows you to upgrade the firmware and configure the device settings directly from your PC. Using
this software, you can assign speed dial presets, FM radio frequency presets and more. It is available for both Windows and
Mac. For more information on downloading the Device Manager, please visit www.sena.com.
4.6.2 Sena Smartphone App
The Sena Smartphone App allows you to configure device settings and read the User’s Guide and the Quick Start Guide. Pair
your phone with your 10R headset (please refer to section 5.1 “Mobile Phone Pairing - Mobile Phone, Bluetooth Stereo
Device”). Run the Sena Smartphone App and you can configure its settings directly from your smartphone. You can download
the Sena Smartphone App for Android or iPhone from www.sena.com/app.
5 PAIRING THE 10R WITH BLUETOOTH DEVICES
Before using the 10R Bluetooth headset with any other Bluetooth devices for the first time, you will need to pair them togeth er.
You can pair the 10R with Bluetooth mobile phones, Bluetooth stereo devices such as MP3 players, or motorcycle specifi c
Bluetooth GPS navigation, and with other Sena Bluetooth headsets. The pairing operation is required only once for each
Bluetooth device. The headset remains paired with the devices and automatically reconnects to them when they are within
range. You will hear a high toned single beep and a voice prompt whenever the headset reconnects to the paired device:
“Phone connected” to a mobile phone, “Media connected” to a Bluetooth stereo device.
5.1 Mobile Phone Pairing - Mobile Phone, Bluetooth Stereo Device
1. To enter the voice configuration menu, press and hold the Front Button for 12 seconds until you hear the voice prompt,
“Configuration menu”.
2. Move the Joystick up or down until you will hear the voice prompt, “Phone pairing”.
3. Search for a Bluetooth device on your mobile phone. Select Sena 10R in the list of devices detected on the mobile phone.
4. Enter 0000 for the PIN. Some mobile phones may not ask for a PIN.
5. The mobile phone confirms that pairing has completed and the 10R is ready for use. You will hear the voice prompt, “Your
headset is paired”.
6. If the pairing process is not completed within three minutes, the 10R will return to stand-by mode.
Note:
1. If the Bluetooth connection between the headset and a mobile phone is disconnected, tap the Rear Button to recover the
Bluetooth connection immediately.
2. If the Bluetooth connection between the headset and a media player is disconnected, press the Joystick for 1 second to
recover the Bluetooth connection and play.
5.2 Second Mobile Phone Pairing - Second Mobile Phone, GPS, and SR10
Typical Bluetooth headsets can connect with only one HFP (Hands-Free-Profile) Bluetooth device such as mobile phone,
GPS, and Sena SR10, but second mobile phone pairing allows the headset to connect with two HFP devices simultaneously.
So, when you already have a mobile phone connected with the 10R, you can also pair and connect a second mobile phone or
other HFP devices.
1. To enter the voice configuration menu, press and hold the Front Button for 12 seconds until you hear the voice prompt,
“Configuration menu”.
2. Move the Joystick up or down until you hear the voice prompt, “Second mobile phone pairing”.
3. Search for Bluetooth devices on the HFP device. Select the Sena 10R in the list of the devices detected on the HFP device.
4. Enter 0000 for the PIN. Some HFP devices may not ask for the PIN.
5. The HFP device confirms that the pairing is completed and the 10R is ready for use. You will hear a voice prompt, “Your
headset is paired”.
Note:
1. If the GPS is also your preferred Bluetooth stereo music source, you can pair the GPS to the 10R by following the simple
procedure in section 5.1, “Mobile Phone Pairing - Mobile Phone, Bluetooth Stereo Device”.
2. You have to use a motorcycle specific GPS, which transmits turn-by-turn voice instructions to the headset by Bluetooth.
Most automotive GPS systems do not have this feature.
3. The Sena SR10 is a Bluetooth two-way radio adapter for group communication, and uses Hands-Free Profile. The
incoming audio from the two-way radio via SR10 is heard in the background while having an intercom conversation or a
mobile phone call.
4. The GPS navigation or a radar detector could be connected to the SR10 by wire. The GPS voice instruction or the radar
detector alarm is also heard in the background via SR10 while having an intercom conversation or a phone call. Please refer
to the SR10 User’s Guide for details.
5.3 Advanced Selective Pairing: A2DP Stereo or Handsfree
When you are using a smartphone, sometimes you may need to selectively use the 10R for A2DP stereo music only or for
mobile phone handsfree only. These instructions are for advanced users who want to pair the 10R to their smartphones with
only one selective profile: A2DP for stereo music of HFP for phone calls.
If you have previously paired a mobile phone to the 10R, you must clear the previous pairing list on both devices: the mobile
phone and the 10R. To clear the pairing list on the 10R, please do a factory reset or following the pairing list clearing
procedure described in section 13.11, “Factory Reset” or 13.8, “Delete All Bluetooth Pairing Information”. To clear the pairing
list on the mobile phone, please refer to the mobile phone manual. For most smartphones, delete the Sena 10R from the list
of Bluetooth devices in the settings menu.
5.3.1 A2DP Stereo Music Only
1. To enter the voice configuration menu, press and hold the Front Button for 12 seconds until you hear the voice prompt,
“Configuration menu”.
2. Move the Joystick up or down until you hear the voice prompt, “Phone selective pairing”.
3. Search for Bluetooth devices on your smartphone. Select Sena 10R in the list of devices detected on your phone.
4. Enter 0000 for the PIN. Some smartphones may not ask for a PIN.
5.3.2 HFP for Phone Call Only
1. To enter the voice configuration menu, press and hold the Front Button for 12 seconds until you hear the voice prompt,
“Configuration menu”.
2. Move the Joystick up or down until you hear the voice prompt, “Media selective pairing”.
3. Search for Bluetooth devices on your smartphone. Select Sena 10R in the list of devices detected on your phone.
4. Enter 0000 for the PIN. Some smartphones may not ask for a PIN.
5.4 Intercom Pairing
5.4.1 Pairing with Other 10R Headsets for Intercom Conversation
The 10R can be paired with up to three other headsets for Bluetooth intercom conversation.
1. Turn on the two 10R headsets (A and B) that you would like to pair with each other.
2. Press and hold the Front Button of the headset A and B for 5 seconds until red LEDs of the both units start to flash rapidly.
You will hear a voice prompt, “Intercom pairing”.
3. Tap the Front Button on any one of the two headsets A and B, and wait unit the LEDs of both headsets turn to blue and
intercom connection is automatically established. The two 10R headsets A and B are paired with each other for intercom
conversation. If the pairing process is not completed within one minute, the 10R will return to stand-by mode.
Pairing A & B
4. You can make other pairing between headsets A and C, and between headsets A and D by following the same procedure
as above.
5. The intercom pairing queue is ‘Last-Come, First-Served’. If a headset has multiple paired headsets for intercom
conversations, the last paired headset is set as first intercom friend. The previous intercom friend becomes second
intercom friend, and third intercom friend.
Note:
For example, after the pairing procedures listed above, headset D is the first intercom friend of headset A. Headset C is the
second intercom friend of headset A, and headset B is the third intercom friend of headset A.
5.4.2 Pairing with Other Sena Headset Models for Intercom Conversation
The 10R can be paired with all other Sena headset models such as the 20S, SMH10 and the SMH5 for intercom conversation.
Please follow the same procedure as above to pair with these headset models.
Note:
The SMH5 cannot participate in three-way or four-way conference intercom with the 10R. The SMH5 has a limited capability
of having two-way intercom with other Sena headsets.
Function
Handlebar Remote
Headset
Mobile Phone
Pairing
Press the Joystick for 5 seconds
Press the (-) Button for 12 seconds
Second Mobile
Phone Pairing
Press the Front Button for 5 seconds
Press the (-) Button for 12 seconds
Tap the Rear Button
Tap the (+) Button three times
Press the Joystick for 5 seconds
Press the (-) Button for 12 seconds
Tap the Front Button
Tap the (+) Button twice
Press the Joystick for 5 seconds
Press the (-) Button for 12 seconds
Media Selective
Pairing
Phone Selective
Pairing
Intercom Pairing
Tap the Rear Button
Tap the (+) Button
Press the Front Button for 5 seconds
Press the Center Button for 5
seconds
Tap the Front Button of any one of
the two headsets
Tap the Center Button of any one
of the two headsets
Button Operation Table for Bluetooth Pairing
6 MOBILE PHONE, GPS, SR10
6.1 Mobile Phone Call Making and Answering
1. When you have an incoming call, simply tap the Rear Button or the Front Button to answer the call.
2. You can also answer the incoming call by loudly speaking any word of your choice if Voice Activated Phone Answering
(VOX Phone) is enabled, unless you are connected to intercom.
3. To end a call, tap the Rear Button or press the Front Button for 2 seconds until you hear a mid-tone single beep, or wait for
the called person to end the call.
4. To reject a call, press the Front Button for 2 seconds until you hear a beep while the phone is ringing.
5. There are several ways to make a phone call:
- Enter numbers on your mobile phone’s keypad and make a call. Then the call is automatically transferred to the headset.
- Tap the Rear Button in stand-by mode to activate the voice dialer of your mobile phone. For this, the voice dialing function
must be available on the mobile phone. Refer to your mobile phone manual for further instruction.
Note:
1. If you have two phones connected to your headset and you have an incoming call from the second phone during the call of
the first phone, then you may still receive the call from the second phone. In this case, the call from the first phone is on
waiting mode. If you end a call, then it will automatically guide you to the first phone call.
2. If you have a mobile phone and a GPS connected to your headset, you may not be able to listen to the GPS voice
instruction during the phone call.
6.2 Speed Dialing
You can quickly make a phone call by using the voice speed dial menu.
1. To enter into the voice speed dial menu, double tap the Rear Button and you will hear a mid-toned single beep and a voice
prompt, “Speed dial”.
2. Tap the (+) Button or the (-) Button to navigate between the menus. You will hear voice prompts for each menu item.
3. Tap the Rear Button to select a voice menu among the followings:
(1) Last number redial
(2) Speed dial 1
(3) Speed dial 2
(4) Speed dial 3
(5) Cancel
4. After selecting the last number redial menu, you will hear a voice prompt, “Last number redial”. Then, to redial the last
phone call number, tap the Rear Button.
5. To call one of the speed dials, tap the (+) Button or the (-) Button to navigate between the menus until you hear a voice
prompt, “Speed dial (#)”. Then, tap the Rear Button.
6. If you want to exit the speed dial immediately, tap the (+) Button or the (-) Button until you hear voice prompt, “Cancel”,
and tap the Rear Button. If you do not press any button within 15 seconds, the 10R will exit the voice speed dial menu and go
back to stand-by mode.
Note:
1. Make sure that you connect the mobile phone and the headset to use the speed dial function.
2. You need to assign speed dial numbers before using the speed dial (please refer to section 13.1, “Assigning Speed Dial”).
Function
Handlebar Remote
Headset
Answer
Tap the Rear Button or the Front
Button
Tap the Center Button
End
Tap the Rear Button or the Front
Button for 2 seconds
Press the Center Button for 2
seconds
Press the Front Button for 2 seconds
Press the Center Button for 2
seconds
Speed Dial
Double tap the Rear Button
Press the (+) Button for 3 seconds
Voice Dialer
Tap the Rear Button
Press the Center Button for 3
seconds
Reject
Button Operation Table for Mobile Phone Call Making and Answering
6.3 GPS Navigation
If you pair a Bluetooth GPS to the 10R as described in section 5.2, “Second Mobile Phone Pairing”, you can listen to GPS
instructions wirelessly. Move the Joystick up or down to adjust volume. The GPS voice instruction interrupts intercom
conversation but it is automatically reestablished after the GPS voice instruction ends.
6.4 Sena SR10, Two-Way Radio Adapter
You can use a two-way radio and the 10R Bluetooth intercom simultaneously by using the Sena SR10, a Bluetooth Two-way
Radio Adapter (please refer to section 5.2, “Second Mobile Phone Pairing”). Incoming audio from the two-way radio will not
interrupt an intercom conversation but is heard in the background. This is useful when you have an intercom conversation
with a passenger on the back seat and use a two-way radio for group communication with other motorcycle riders.
7 STEREO MUSIC
7.1 Bluetooth Stereo Music
The Bluetooth audio device must be paired with the 10R by following the “Bluetooth Stereo Device Pairing” procedures
described in the section 7.1. The 10R supports the Audio/Video Remote Control Profile (AVRCP), so if your Bluetooth audio
device also supports the AVRCP, you can use the 10R to remotely control music playback. Not only can you adjust the
volume but you can also use functions such as play, pause, next track and previous track.
1. To play or pause music, press the Joystick for 1 second until you hear a double beep.
2. To adjust the volume, press the (+) Button or the (-) Button.
3. To track forward or track back, press the (+) Button or the (-) Button for 1 second until you hear a mid-tone single beep.
7.2 Music Sharing
You can start sharing music with an intercom friend using Bluetooth stereo music during a two-way intercom conversation
(please refer to section 8.1, “Two-way Intercom”). When you terminate music sharing, you can go back to the intercom
conversation. To start or terminate sharing music, press the Joystick for 1 second during an intercom conversation until you
hear a double beep. To track forward or track back, press the (+) Button or the (-) Button for 1 second.
Note:
1. Both you and your intercom friend can remotely control music playback such as track forward and track back.
2. Music sharing will be paused when you are using your mobile phone or listening to GPS instructions.
3. In order to share music, make sure that you update both headsets with the firmware that has the music sharing feature,
and enable the EDR setting in the Sena Device Manager.
Function
Handlebar Remote
Headset
Play Music
Press the Joystick for 1 second
Press the Center Button for 1 second
Pause Music
Press the Joystick for 1 second
Press the Center Button for 1 second
Move the Joystick right for 1 second
Press the (+) Button for 2 seconds
Move the Joystick left for 1 second
Press the (-) Button for 2 seconds
Track Forward
Track Back
Button Operation Table for Music Control
8 INTERCOM
Please make sure your intercom devices are paired as described in section 5.4, “Intercom Pairing”.
8.1 Two-way Intercom
8.1.1 Starting Two-way Intercom
You can start an intercom conversation with one of any intercom friends by tapping the Front Button: Tap the Front Button
once to intercom with the first intercom friend, tap the Front Button twice to intercom with the second intercom friend, and
tap the Front Button three times to intercom with the third intercom friend.
Start Two-way Intercom Conversation
8.1.2 Ending Two-way Intercom
To terminate an intercom conversation, tap the Front Button. Any intercom connection with any intercom friend will be
terminated by a single tap. A double or triple tap will do nothing in this case.
8.2 Three-way Intercom
8.2.1 Starting Three-way Intercom
You (A) can have a three-way conference intercom with two other 10R friends (B & C) by establishing two intercom
connections simultaneously. While a three-way conference intercom is in progress, mobile phone connection of all three
participants is temporarily disconnected. However, as soon as the conference intercom terminates or one of the participants
leaves the intercom, all mobile phones automatically reconnect to their headsets. If you have an incoming mobile phone call
during the conference intercom, terminate the conference intercom to automatically reconnect and receive the phone call.
1. You (A) need to be paired with two other friends (B & C) for three-way conference intercom.
2. Start an intercom conversation with one of the two friends in your intercom group. For example, you (A) may start an
intercom conversation with the intercom friend (B). Or intercom friend (B) may start an intercom call with you (A).
3. The second intercom friend (C) may join the intercom by making an intercom call to you (A).
4. Now you (A) and two 10R intercom friends (B & C) are having a three-way conference intercom.
8.2.2 Ending Three-way Intercom
You can completely terminate the conference intercom or just disconnect an intercom connection with one of your active
intercom friends.
1. Press the Front Button for 1 second until you hear a beep to terminate three-way conference intercom completely. It
terminates both intercom connections with (B) and (C).
2. Tap or double tap the Front Button to disconnect intercom connection with one of the two intercom friends accordingly. For
example, by single tapping the Front Button, you can terminate the intercom connection with just the first intercom friend (B).
However, you still have the intercom connection with your second intercom friend (C).
Front Button Operation
Result
Press for 1”
Disconnect (B) & (C)
Single tap
Disconnect (B)
Double tap
Disconnect (C)
End Three-way Intercom
8.3 Four-way Intercom
8.3.1 Starting Four-way Intercom
You can have four-way conference intercom with three other 10R users by adding one more intercom participant to the threeway intercom. While you are having a three-way intercom as above in section 8.2, a new participant (D), who is an intercom
friend of your intercom friend (C), may join the conference intercom by making an intercom call to your intercom friend (C).
Please note that in this case, the new participant (D) is an intercom friend of (C), not of you (A).
8.3.2 Ending Four-way Intercom
As same in the case of three-way intercom, you can completely get out of the four-way conference intercom or just
disconnect a single intercom connection.
1. Press the Front Button for 1 second until you hear a beep to terminate four-way conference intercom. It terminates the
intercom connections between you (A), and your intercom friends (B) and (C).
2. Tap or double tap the Front Button to disconnect the intercom connection with one of the two intercom friends accordingly.
However, when you disconnect the second friend (C) by double tapping the Front Button, you will be disconnected with the
third participant (D) as well. This is because the third participant (D) is connected with you via the second friend (C).
Front Button Operation
Result
Press for 1”
Disconnect (B), (C) & (D)
Single tap
Disconnect (B)
Double tap
Disconnect (C) & (D)
End Four-way Intercom
Function
Handlebar Remote
Headset
Call first
intercom friend
Tap the Front Button
Tap the Center Button
Call second
intercom friend
Double tap the Front Button
Double tap the Center Button
Call third
intercom friend
Triple tap the Front Button
Triple tap the Center Button
Tap the Front Button
Tap the Center Button
Press the Front Button for 1 second
Press the Center Button for 1
second
End two-way
intercom
End all
intercoms
Button Operation Table for Intercom
9 THREE-WAY CONFERENCE PHONE CALL WITH INTERCOM
PARTICIPANT
1. When you have an incoming mobile phone call during an intercom conversation, you will hear a ring tone. You can choose
whether to 1) answer the mobile phone call and stop the intercom conversation, or 2) reject the phone call and stay on the
intercom conversation.
a. To answer the phone call and stop the intercom conversation, tap the Rear Button or the Front Button. The VOX
Phone feature does not work if you are connected to intercom. When you hang up the phone call, the intercom will
automatically be recovered.
b. To reject the phone call and stay on the intercom conversation, press the Front Button for 2 seconds until you hear a
beep.
Unlike other motorcycle Bluetooth headsets, this prevents a user from being dropped out of an intercom conversation by an
incoming mobile call.
2. When you have an incoming intercom call during a mobile phone call, you will hear 4 high toned beeps, alerting you that
there is an incoming intercom call. You will also hear a voice prompt, “Intercom requested”. In this case, the intercom call
does not override the mobile call because intercom has lower priority than mobile call. You have to hang up the mobile phone
call to make or receive an intercom call.
3. You can have a three-way conference phone call by adding an intercom friend to the mobile phone conversation. During a
mobile phone conversation, tap the Front Button to invite one of the intercom friends to the mobile phone line. To disconnect
the intercom first and go back to your private mobile phone call, terminate the intercom by tapping the Front Button. To end
the mobile phone call first and maintain the intercom conversation, tap the Rear Button, or press the Front Button for 2
seconds, or wait for the person on the mobile phone line to end the call.
Function
Handlebar Remote
Start
End intercom
first
End phone call
first
Headset
Tap the Front Button while having a
mobile phone call
Tap the Center Button while having
a mobile phone call
Tap the Front Button
Tap the Center Button
Tap the Rear Button
or
Press the Front Button for 2 seconds
or
Wait for the called person to end the
call
Press the Center Button for 2
seconds
or
Wait for the called person to end
the call
Button Operation Table for Three-way Conference Phone Call
10 UNIVERSAL INTERCOM
You can have an intercom conversation with non-Sena Bluetooth headsets using the Universal Intercom function. Non-Sena
Bluetooth headsets can be connected to the Sena Bluetooth headset if they support the Bluetooth Hands-Free Profile (HFP).
The working distance may differ depending on the performance of Bluetooth headset that it is connected to. In general, it is
shorter than normal intercom distance since it uses the Bluetooth Hands-Free Profile. The Universal Intercom affects both the
phone call connection and the multipoint connection (mostly used for GPS connections for riders). You cannot use a
multipoint connection device while you are using the Universal Intercom in case as below.
1. If a non-Sena headset does not support a multipoint connection, it cannot use a phone call connection while using the
Universal Intercom.
2. As for Sena headsets, the Universal Intercom affects the multipoint connection.
3. If non-Sena headset (already paired as Universal Intercom with Sena) is turned on, then the multipoint connection is
automatically deactivated. And the non-Sena headset is automatically connected to Sena headset as a Universal Intercom.
So you cannot use multipoint connection device such as GPS, while a non-Sena headset is turned on.
4. Even though you disconnect the non-Sena headset as a Universal Intercom, it will not automatically restore the multipoint
connection. To restore the multipoint connection, you should turn off the non-Sena headset first, then try to connect to
multipoint device manually from the device screen or simply reboot the device so that it automatically connects to the Sena
headset.
10.1 Universal Intercom Pairing
The 10R can be paired with non-Sena Bluetooth headsets for Bluetooth intercom conversation. You can pair the 10R with
only one non-Sena Bluetooth headset so if you pair with a different non-Sena Bluetooth headset, the previous pairing will be
removed.
1. Turn on the 10R and a non-Sena Bluetooth headset that you want to pair with.
2. Press and hold the Front Button on the 10R for 8 seconds until the blue LED flashes rapidly. You will hear a voice prompt,
“Universal intercom pairing”.
3. Perform the operation required for handsfree pairing on the non-Sena Bluetooth headset (refer to the User’s Guide for the
headsets you want to use). The 10R will automatically pair with a non-Sena Bluetooth headset when each are in pairing mode.
10.2 Two-way Universal Intercom
You can initiate the Universal Intercom connection with non-Sena Bluetooth headsets using the same intercom connection
method as you would between other Sena headsets. You may single tap the Front Button to begin an intercom conversation
with the first intercom friend, double tap with the second intercom friend, and triple tap with the third intercom friend.
Non-Sena Bluetooth headsets may initiate the Universal Intercom connection, by activating the voice dialer or using the
redialing operation. You may also disconnect the existing connection by using the operation to end a call (refer to the User’s
Guide of the headsets for voice dialer, redialing, and ending a call).
10.3 Three-way Universal Intercom
You may make a three-way Universal Intercom connection with two 10Rs and one non-Sena Bluetooth headset. If the
intercom connection is made, all headsets connected cannot use the mobile phone call function since the connection
between the headset and the phone is disconnected temporarily. If you disconnect the intercom call, the mobile phone
connection is made again automatically so that you can use a mobile phone call function.
1. You (A) need to be paired with a non-Sena Bluetooth headset (B) and another 10R headset (C) for the three-way
conference intercom.
2. Start an intercom conversation with non-Sena Bluetooth headset (B) in your intercom group. For example, you (A) may
start an intercom conversation with non-Sena Bluetooth headset (B). The non-Sena Bluetooth headset (B) may also start an
intercom call with you (A).
3. The other 10R (C) may join the intercom by making an intercom call to you (A).
4. Now you (A), non-Sena Bluetooth headset (B), and the other 10R (C) are having a three-way conference intercom.
5. You may disconnect three-way Universal Intercom using the same way as you do in normal three-way intercom. Please
refer to section 8.2.2, “End Three-way Intercom”.
10.4 Four-way Universal Intercom
You may make a four-way Universal Intercom connection with a couple of different configurations, 1) three 10Rs and one
none-Sena Bluetooth headset or 2) two 10Rs and two non-Sena Bluetooth headsets.
You may have a couple of other Four-way Universal Intercom configurations, 1) your headset (A), a non-Sena Bluetooth
headset (B), another 10R (C), and a non-Sena Bluetooth headset (D), 2) your headset (A), a non-Sena Bluetooth headset (B),
and two other 10R headsets (C and D). You may make the four-way Universal Intercom call the same way as a normal fourway intercom call.
10.4.1 Four-way Universal Intercom Case 1
Two 10R headsets (A and C) and two non-Sena Bluetooth headsets (B and D).
1. You (A) may start an intercom conversation with the non-Sena Bluetooth headset (B).
2. The other 10R (C) may join the intercom by making an intercom call to you (A).
3. The non-Sena Bluetooth headset (D) may join the conference intercom by making an intercom call to the 10R (C).
4. Now two 10R headsets (A & C) and two non-Sena Bluetooth headsets (B & D) are connected with the four-way Universal
Intercom.
You may disconnect a four-way Universal Intercom using the same way as you do in a normal four-way intercom. Please
refer to section 8.3.2, “End Four-way Intercom”.
10.4.2 Four-way Universal Intercom Case 2
Three 10R headsets (A, C and D) and one non-Sena Bluetooth headset (B)
The procedure is the same as case 1 described in section 11.4.1.
11 FM RADIO
11.1 FM Radio On/Off
To turn on the FM radio, press the Rear Button for 1 second until you hear a mid-toned double beep sound. You will then
hear a voice prompt, “FM on”. To turn off the FM radio, press the Rear Button for 1 second until you hear a voice prompt, “FM
off”. When you power it off, the 10R will remember the last station frequency. When you power it on, the last station
frequency will be playing.
11.2 Preset Stations
You can listen to preset stations while listening to the FM radio. Tap the Rear Button once to go upward to your next saved
preset station.
11.3 Seek and Save
“Seek” is the function that searches for station to station frequencies. To use the “Seek” function, please follow the procedure
below:
1. Move and hold the Joystick left or right for 1 second to search down or up the station dial.
2. If the tuner finds a station while searching frequencies, it stops the seek function.
3. To save the current station, press and hold the Front Button for 1 second until you hear a voice prompt, “Preset (#)”.
4. Move the Joystick up or down in order to select which preset number you want for that specific station. You can save up to
10 preset stations. (You may cancel the preset operation by waiting approximately 10 seconds. You will then hear “Save
preset cancelled”. You can also move the Joystick up or down until you hear “Cancel”. Tap the Front Button to confirm
cancellation. You will then hear “Save preset cancelled”).
5. To save the current station, tap the Front Button again. You will then hear a voice prompt, “Save preset (#)”.
6. To delete the saved station in the preset number, tap the Rear Button. You will then hear a voice prompt, “Delete preset
(#)”.
Note:
1. You can save FM stations to presets before using FM radio. Connect the 10R to your PC and open the Sena Device
Manager. It allows you to save up to 10 FM station frequency presets on the 10R settings menu. You may do the same
operation by using the Sena Smartphone App.
2. You can still answer an incoming phone call and intercom while listening to the FM radio.
11.4 Scan and Save
“Scan” is the function that automatically searches station frequencies, starting from the current frequency and up. To use the
scan function, please follow the procedures below:
1. Double tap the Rear Button. Then the current station frequency moves upward to find other station frequencies.
2. If the tuner finds a station, it stays at the station frequency for 8 seconds, then scanning to the next station frequency.
3. Scan function stops when you double tap the Rear Button again.
4. To save a station while scanning frequencies, tap the Rear Button when at that station. You will hear a voice prompt from
the 10R, “Save preset (#)”. The station will be saved as the next preset number.
5. All stations preset during “Scan”, will overwrite previously set stations.
11.5 Temporary Preset
With the temporary preset function, you may temporarily preset stations automatically without changing the existing preset
stations. Tap the Rear Button three times to automatically scan for 10 temporary preset stations. The temporary preset
stations will be cleared when the system is powered off.
11.6 Region Selection
You can select the proper FM frequency region from the Sena Device Manager. With the region setting, you may optimize the
seek function to avoid unnecessary frequency ranges (Factory default: worldwide).
Region
Frequency range
Step
Worldwide
76.0 ~ 108.0 MHz
± 100 kHz
Americas
87.5 ~ 107.9 MHz
± 200 kHz
Asia
87.5 ~ 108.0 MHz
± 100 kHz
Australia
87.5 ~ 107.9 MHz
± 200 kHz
Europe
87.5 ~ 108.0 MHz
± 100 kHz
Japan
76.0 ~ 90.0 MHz
± 100 kHz
Function
Handlebar Remote
Headset
FM radio on/off
Press the Rear Button for 1 seconds
Press the (+) Button for 5 seconds
Select preset
Tap the Rear Button
Press the (+) Button for 1 second
Seek stations
Move the Joystick left or right for 1
second
Press the (+) Button or (-) Button
for 3 seconds
Scan up FM
band
Double tap the Rear Button
Press the (-) Button for 5 seconds
Stop scanning
Double tap the Rear Button
Press the (-) Button for 5 seconds
Save preset
while scanning
Tap the Rear Button
Press the (+) Button for 1 second
Triple tap the Rear Button
Press the (-) Button for 2 seconds
Temporary
Preset
Button Operation Table for FM Radio
12 FUNCTION PRIORITY
The 10R operates in the following order of priority:
(highest)
Mobile phone
Intercom
Music sharing by Bluetooth stereo music
FM Radio
(lowest)
Bluetooth stereo music
A lower priority function is always interrupted by a higher priority function. For example, stereo music is interrupted by
intercom call, and an intercom conversation is interrupted by an incoming mobile phone call.
13 CONFIGURATION SETTING
You can set the configuration of the 10R by the voice menu instruction described below.
1. To enter into voice configuration menu, press and hold the Front Button for 12 seconds until the LED shows solid blue and
you hear high toned double beeps. You will also hear a voice prompt, “Configuration menu”.
2. Move the Joystick up or down to navigate between the menus. You will hear voice prompts for each menu item as below.
3. You can enable the feature or execute the command by tapping the Rear Button, or disable the feature by tapping the
Front Button.
4. If no button is pressed within 10 seconds, the 10R will exit the configuration and go back to stand-by mode.
5. If you want to exit the configuration immediately, Move the Joystick up or down until you hear a voice prompt, “ Exit
configuration”, and tap the Rear Button.
Function
Handlebar Remote
Headset
Enter configuration
menu
Press the Front Button for 12
seconds
Press the Center Button for 12
seconds
Navigate between
menus
Move the Joystick up or down
Tap the (+) Button or (-) Button
Execute
Tap the Rear Button
Tap the Center Button
Enable Setting
Tap the Rear Button
Tap the Center Button
Disable Setting
Tap the Front Button
Tap the Center Button
The voice prompt for each menu item is as below:
(1) Phone pairing
(2) Multipoint pairing
(3) Phone selective pairing
(4) Media selective pairing
(5) Speed dial
(6) Audio Boost
(7) VOX phone
(8) VOX intercom
(9) VOX sensitivity
(10) Voice prompt
(11) Sidetone
(12) Noise control
(13) Delete all pairings
(14) Factory reset
(15) Exit configuration
13.1 Mobile Phone Pairing
Voice Prompt
"Phone pairing"
Factory Default
N/A
To go into mobile phone pairing mode, tap the (+) Button or the (-) Button until you hear the voice prompt, “Phone pairing”.
Please refer to section 5.1 for details on mobile phone pairing. If you tap the (+) Button or the (-) Button, you can exit from the
phone pairing mode.
13.2 Second Mobile Phone Pairing
Voice Prompt
"Second mobile phone
pairing"
Factory Default
N/A
To go into second mobile phone pairing mode, tap the (+) Button or the (-) Button until you hear the voice prompt, “Second
mobile phone pairing”. Please refer to section 5.2 for details on second mobile phone pairing. If you tap the (+) or the (-)
Button, you can exit from the second mobile phone pairing mode.
13.3 Phone Selective Pairing
Voice Prompt
"Phone selective pairing"
Factory Default
N/A
To go into phone selective pairing mode, tap the (+) Button or the (-) Button until you hear the voice prompt, “Phone
selective pairing”. Please refer to section 5.3.2 for details on phone selective pairing. If you tap the (+) or the (-) Button, you
can exit from the phone selective pairing mode.
13.4 Media Selective Pairing
Voice Prompt
"Media selective pairing"
Factory Default
N/A
To go into media selective pairing mode, tap the (+) Button or the (-) Button until you hear the voice prompt, “Media selective
pairing”. Please refer to section 5.3.1 for details on media selective pairing. If you tap the (+) or the (-) Button, you can exit
from the media selective pairing mode.
13.5 Assigning Speed Dial
Voice Prompt
"Speed dial"
Factory Default
N/A
Execute
Tap the Center
1. To assign a phone number as a speed dial, tap the (+) Button or the (-) Button until you hear a voice prompt, “Speed dial”.
2. Tap the Center Button, and you will hear a voice prompt, “Speed dial one” and “Phone connected”.
3. Tap the (+) Button or the (-) Button to select one of three speed dial numbers and you hear a voice prompt, “Speed dial
(#)”.
4. Call a phone number you want to assign and you will hear a voice prompt, “Save speed dial (#)”. The phone number is
automatically assigned to the selected speed dial number. Then the phone call will hang up before being connected.
5. To exit the menu, tap the (+) Button or the (-) Button until you hear a voice prompt, “Cancel”, and tap the Center Button to
confirm. You will then hear a voice prompt, “Cancel”. If no button is pressed within 1 minute, the 10R will exit the
configuration menu and go back to stand-by mode.
Note:
1. After assigning a phone number to one of three speed dials, you can continually assign another phone number to the rest
of two speed dials.
2. You can also assign phone numbers for speed dialing by using the Sena Device Manager software or the Sena
Smartphone App. Please visit the Sena Bluetooth website at www.sena.com for more information.
13.6 Enabling/Disabling Audio Boost
Voice Prompt
“Audio boost”
Factory Default
Enable
Enable/Disable
Tap the Center Button
Enabling Audio Boost increases the overall maximum volume. Disabling Audio Boost reduces the overall maximum volume,
but delivers more balanced sound.
13.7 Enabling/Disabling Voice Activated Phone Answering
Voice Prompt
“VOX phone”
Factory Default
Enable
Enable/Disable
Tap the Center Button
If this feature is enabled, you can answer incoming calls by voice. When you hear a ringtone for an incoming call, you can
answer the phone by saying a word such as “Hello” loudly or by blowing air into the microphone. VOX Phone is temporarily
disabled if you are connected to intercom. If this feature is disabled, you have to tap the Center Button to answer an incoming
call.
13.8 Enabling/Disabling Voice Activated Intercom
Voice Prompt
“VOX intercom”
Factory Default
Disable
Enable/Disable
Tap the Center Button
If this feature is enabled, you can initiate an intercom conversation with the last connected intercom friend by voice. When
you want to start intercom, say a word such as “Hello” loudly or blow air into the microphone. If you start an intercom
conversation by voice, the intercom terminates automatically when you and your intercom friend remain silent for 20 seconds.
However, if you manually start an intercom conversation by tapping the Center Button, you have to terminate the intercom
conversation manually.
However, if you start intercom by voice and end it manually by tapping the Center Button, you will not be able to start
intercom by voice temporarily. In this case, you have to tap the Center Button to restart the intercom. This is to prevent
repeated unintentional intercom connections by strong wind noise. After rebooting the 10R, you can start intercom by voice
again.
13.9 Setting Intercom Vox Sensitivity
Voice Prompt
“VOX sensitivity”
Factory Default
Level Adjustment
Tap the (+) Button or the (-)
Button
(1~5)
Apply
Tap the Center Button
Tap the (+) Button or the (-) Button until you hear the voice prompt, “VOX sensitivity”. By tapping the Center Button, it will
lead you to the level adjustment mode. If you enter the mode, you will hear a prompt stating the current VOX sensitivity level.
You may adjust the VOX sensitivity level by tapping the (+) Button or the (-) Button. Level 5 is the highest sensitivity setting
and 1 is the lowest. After you have completed the setting, tap the Center Button to apply the changes.
13.10 Enabling/Disabling Voice Prompts
Voice Prompt
“Voice prompt”
Factory Default
Enable
Enable/Disable
Tap the Center Button
You can disable voice prompts by configuration setting, but the following voice prompts are always on.
- Voice prompts for configuration setting menu
- Voice prompts for battery level indicator
- Voice prompts for speed dial
- Voice prompts for FM radio functions
13.11 Enabling/Disabling RDS AF
Voice Prompt
“RDS AF setting”
Factory Default
Enable
Enable/Disable
Tap the Center Button
RDS AF allows a receiver to re-tune to the second frequency location when the first signal becomes too weak. With RDS AF
enabled on the receiver, a radio station with more than one frequency can be used.
13.12 Enabling/Disabling Sidetone
Voice Prompt
“Sidetone”
Factory Default
Disable
Enable/Disable
Tap the Center Button
Sidetone is audible feedback of your own voice. It helps you to naturally speak at the correct level according to varying helmet
noise conditions. If this feature is enabled, you can hear what you are speaking during an intercom conversation or a phone
call.
13.13 Enabling/Disabling Advanced Noise Control™
Voice Prompt
“Noise control”
Factory Default
Enable
Enable/Disable
Tap the Center Button
When Advanced Noise Control is enabled, the background noise is reduced during an intercom conversation. When it is
disabled, the background noise is mixed with your voice during intercom.
Note:
If you use your 10R with the Bluetooth Audio Pack for GoPro, you can enable or disable this feature only during Normal Audio
Recording Mode. This feature is automatically disabled while in Ultra HD (UHD) Audio Mode.
13.14 Delete All Bluetooth Pairing Information
Voice Prompt
“Delete all pairings”
Factory Default
Execute
N/A
Tap the Center Button
To delete all Bluetooth pairing information of the 10R, tap the (+) Button or the (-) Button until you hear a voice prompt,
“Delete all pairings”, and tap the Center Button to confirm.
13.15 Remote Control Pairing
Voice Prompt
Factory Default
Execute
“Remote control pairing”
N/A
Tap the Center Button
To enter into Remote Control Pairing mode, tap the (+) Button or the (-) Button until you hear a voice prompt, “Remote control
pairing”. Then tap the Center Button to enter into Remote Control Pairing mode. The headset will automatically exit from the
configuration menu.
13.16 Factory Reset
Voice Prompt
Factory Default
Execute
“Factory reset”
N/A
Tap the Center Button
To restore factory default settings on the 10R, tap the (+) Button or the (-) Button until you hear a voice prompt, “Factory
reset”, and tap the Center Button to confirm. The 10R powers off with a voice prompt, “Headset reset, goodbye”.
13.17 Exit Voice Configuration Menu
Voice Prompt
Factory Default
Execute
“Exit configuration”
N/A
Tap the Center Button
To exit voice configuration menu and get back to stand-by mode, tap the (+) Button or the (-) Button until you hear a voice
prompt, “Exit configuration”, and tap the Center Button to confirm.
Tap (+) Button or (-) Button
Tap Center Button
Phone Pairing
None
Second Mobile Phone Pairing
None
Phone Selective Pairing
None
Media Selective Pairing
None
Speed Dial
Execute
Audio Boost
Enable/Disable
VOX Phone
Enable/Disable
VOX Intercom
Enable/Disable
VOX Sensitivity
-Enter adjustment mode
- Save and exit
Voice Prompt
Enable/Disable
RDS AF Setting
Enable/Disable
Sidetone
Enable/Disable
Advanced Noise Control
Enable/Disable
Delete All Pairings
Execute
Factory Reset
Execute
Remote Control Pairing
Execute
Exit Configuration
Execute
Voice Configuration Menu & Button Operations
14 FIRMWARE UPGRADE
The 10R supports firmware upgrades. You can update the firmware using the Sena Device Manager (please refer to section
4.6.1, “Sena Device Manager”). Please visit Sena Bluetooth website at www.sena.com to check the latest software
downloads.
15 TROUBLESHOOTING
15.1 Intercom Failure
When you try to start an intercom conversation with an intercom friend who is unavailable within range or already having a
conference intercom with other riders or a mobile phone call, you will hear a low tone double beep signifying an intercom busy
signal. In this case, you have to try again later.
15.2 Intercom Reconnection
If your intercom friend goes out of range while having an intercom conversation, you may hear static noise and eventually the
intercom will be disconnected. In this case, the 10R automatically tries to reconnect the intercom every 8 seconds and you
will hear high tone double beeps until the intercom is reestablished. If you do not want to make a reconnection, tap the Center
Button to stop the attempt.
15.3 Fault Reset
When the 10R is not working properly or is in faulty status for any reason, you may reset by pushing the pin-hole reset button
below the (+) Button . Insert a paper clip into the reset pin-hole and press the reset button for a second with light pressure.
The 10R will be switched off. Restart the system and try again. This will not restore the headset to factory default settings.
15.4 Factory Reset
If you want to restore the headset to factory default settings, use the Factory Reset in the configuration menu. The headset
automatically restores the default settings and turns off. Please refer to section 13.16, “Factory Reset” for more details.
16 OPERATION QUICK REFERENCE
Type
Basic Function
Mobile Phone
Function
Button
Duration
LED
Beep
Power on
Center Button & (+)
Button
1 sec
Solid blue
Ascending beeps
Power off
Center Button & (+)
Button
Tap
Solid red
Descending beeps
Volume
adjustment
(+) Button or (-) Button
Tap
Answer & end
phone call
Center Button
Tap
Speed dial
(+) Button
3 secs
Mid-tone single
beep
Reject incoming
call
Center Button
2 secs
Center Button
5 secs
Red flashing
Mid-tone single
beep
Intercom
Intercom pairing
Center Button of any one of the two headsets
Music
FM radio
Universal
intercom pairing
Center Button
8 secs
Blue flashing
Start / End each
intercom
Center Button
Tap
End all intercoms
Center Button
1 sec
Mid-tone double
beeps
Play/Pause
Bluetooth music
Center Button
1 sec
Mid-tone double
beep
Track
forward/back
(+) Button or (-) Button
1 sec
5 secs
Mid-tone double
beeps
5 secs
Mid-tone double
beeps
3 secs
Mid-tone single
beep
High tone triple
beeps
FM radio on
FM radio off
Select preset
Center Button
Center Button
(+) Button
Seek stations
(+)/(-) Button
5 secs
Scan up FM band
(+) Button
Double tap
Double tap
Stop scanning
(+) Button
High tone double
beeps
Save preset while
scanning
(-) Button
tap
High tone double
beeps
CERTIFICATION AND SAFETY APPROVALS
FCC Compliance Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the
FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment on and off, the user is encouraged to try to correct the interference by one or
more of the following measures:
●
Reorient or relocate the receiving antennae
●
Increase the separation between the equipment and the receiver
●
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
●
Consult the dealer or an experienced radio/TV technician for help.
FCC RF Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow
the specific operating instructions for satisfying RF exposure compliance. The antenna used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures.
FCC Caution
Any changes or modifications to the equipment not expressly approved by the party responsible for compliance could void
user’s authority to operate the equipment.
CE Declaration of Conformity
This product is CE marked according to the provisions of the R&TTE Directive (99/5/EC). Hereby, Sena declares that this
product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. For further
information, please consult www.sena.com. Please note that this product uses radio frequency bands not harmonized within
EU. Within the EU this product is intended to be used in Austria, Belgium, Denmark, Finland, France, Germany, Greece,
Ireland, Italy, Luxembourg, The Netherlands, Portugal, Spain, Sweden, United Kingdom and within EFTA in Iceland, Norway
and Switzerland.
Industry Canada Statement
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two
conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
Bluetooth License
®
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sena is under
license. Other trademarks and trade names are those of their respective owners.
®
The product is compliant with and adopts the Bluetooth Specification 3.0 and has successfully passed all interoperability
®
tests that are specified in the Bluetooth® specification. However, interoperability between the device and other Bluetooth enabled products is not guaranteed.
WEEE (Waste Electrical and Electronic Equipment)
The crossed-out wheel bin symbol on the product, literature, or packaging reminds you that all electrical and
electronic products, batteries, and accumulators must be taken to separate collection at the end of their working life.
This requirement applies to the European Union and other locations where separate collection systems are
available. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please
do not dispose of these products as unsorted municipal waste, but hand it in at an official collection point for recycling.
SAFETY INFORMATION
Please ensure that the product is properly used by observing the warnings and cautions below to prevent any risk and/or
damage to property.
Product Storage and Management
●
Keep the product free of dust. It may damage mechanical and electronic parts of the product.
●
Do not store the product in high temperatures as this may reduce the life span of electronic devices, damage the
battery, and/or melt plastic parts of the product.
●
Do not store the product in cold temperatures. Abrupt changes in temperatures may cause condensation and damage
electronic circuits. Do not clean the product with cleaning solvents, toxic chemicals, or strong detergents as this may
damage the product.
●
Do not paint the product. Paint may obstruct moving parts or interfere with the normal operation of the product.
●
Do not drop or otherwise shock the product. It may damage the product or its internal electronic circuits.
●
Do not disassemble, repair or modify the product as this may damage the product and invalidate the product warranty.
Product Use
●
In some regions, it is prohibited by law to ride motorcycles or bicycles while wearing headsets. Therefore be certain to
comply with all relevant laws in the region before using the product.
●
Use of the product at a high volume for a long period of time may damage your eardrums or hearing ability. Keep the
volume at a modest level.
●
Do not cause impact to the product or touch it with sharp tools as this may damage the product.
●
Do not use the product in high-temperatures or apply heat to the product as this may cause damage, explosion, or fire.
●
Keep the product dry and away from water. It may damage the product.
●
Keep product away from pets or small children. It may damage the product or cause accidents.
●
Do not use the product near a microwave oven or a wireless LAN device as this may cause malfunction or interference
with the product.
●
In any place where wireless communication is prohibited, such as hospitals or airplanes, turn off the power and refrain
from using the product. In a place where wireless communication is prohibited, electromagnetic waves may cause
hazards or accidents.
●
Do not use the product near hazardous explosives. When there are near any explosion hazards, turn off the power and
heed any regulations, instructions, and signs in the area.
●
When using the product, drive at a low speed (slower than 35km/h) for safety. In addition, be certain to conform to laws
regarding the use of communications devices while driving.
●
Do not put the product where it may hamper the driver's vision or manipulate it while driving. This may cause traffic
accidents.
●
Before driving, fasten the product to the helmet, and double-check that it is fastened. Separation of the product while
driving may cause damage to the product or accidents.
●
If the product is damaged, stop using it immediately. It may cause damage, explosion, or fire.
Battery
This product has an irreplaceable rechargeable battery inside. Therefore, when using the product, make sure to adhere to the
following:
●
Never separate the battery from the product as this may damage the product.
●
The battery performance may be reduced over time with usage.
●
In recharging the battery, make sure to use an approved charger provided by the manufacturer. Use of a non-approved
charger may cause fire, explosion, leakage, and other hazards may also reduce the life time or performance of the
battery.
●
Store the battery at temperatures of 15°C~25°C (59°F~77°F). Higher or lower temperatures may reduce the capacity
and life of the battery, or may cause temporary non-operation. Do not use the product in sub-zero temperature,
because it may cause serious reduction of the battery performance.
●
If you apply heat to the battery or throw it into fire, it may explode.
●
Do not use the product with a damaged battery. It may explode and/or cause accidents.
●
Never use a damaged charger. It may explode and/or cause accidents.
●
Battery life may vary depending on conditions, environmental factors, functions of the product in use, and devices used
with it.
PRODUCT WARRANTY AND DISCLAIMER
Limited Warranty
Limited Warranty
Sena Technologies, Inc. (“Sena”) guarantees the product quality based on the technical specification stated in the product
manual, and data regarding product warranty. Here, product warranty extends to the product only. Sena will not be liable for
any loss, damage of human life, or loss of property which may result from using the product beyond defective parts or flaws
that occur due to problems in manufacture.
Warranty Period
Sena guarantees free-of-charge replacements of defective parts of the product or flaws that may have occurred due to
problems in manufacture for a period of 2 years from the date of initial purchase.
Termination
Quality warranty of the product becomes effective on the date of initial purchase. In addition, the quality warranty of the
product expires when the warranty period expires. However, in the following cases, the warranty will be terminated
prematurely.
●
In the event the product has been sold or transferred to a third party.
●
In the event the manufacturer's name, serial number, product label, or other markings have been modified or removed.
●
In the event any unauthorized person has tried to disassemble, repair, or modify the product.
Notice and Waiver
By buying and using this product, you relinquish considerable legal rights including any claim for compensation for damages.
Therefore, be certain to read and understand the following terms and conditions before using the product. Use of this product
will constitute consent to this agreement, and forfeiture of rights to all claims. If you do not consent to all the terms and
conditions of this agreement, return the product for a refund. (Refer to the section "Return for Full Refund".)
1. You agree that you, your descendants, legal proxies, successors, or transferees will not raise permanent volitional
request for any suit, claim, implementation, redemption or similar action from Sena with regard to any occasion such as
difficulty, pain, suffering, inconvenience, loss, injury, or death which may occur to you or a third party during the use of
this product.
2. You must completely understand and accept all risks (including those occurring due to any careless behavior of yours or
others) which may occur during the use of this product.
3. You are responsible for ensuring that your medical condition permits usage of the product and that you are in sufficient
physical condition for using any device which can be used with it. In addition, you must ensure that the product does not
limit your abilities and that you are able to use it safely.
4. You must be an adult who can take responsibilities for using the product.
5. You must read and understand the following warnings and alerts:
●
Sena; together with employees, managers, partners, subsidiaries, representatives, agents, supporting firms and
suppliers, sole sellers of Sena (collectively referred to as "the company") recommend that, before using the product
and similar devices of any brands including its derivative models, you collect any relevant information in advance and
be entirely prepared in terms of weather, traffic situation, and road conditions.
●
When you use the product while you operating any vehicle or equipment such as motorcycles, scooters, mopeds,
ATVs, or quad-bikes (hereinafter called as "transportation means"), you must take complete caution regardless of the
location of such operation.
●
Use of the product on the road may cause such risks as fracture, serious disability, or death.
●
Risk factors, which may occur when you use the product, may be due to errors of the manufacturer, its agents, or
third parties which are involved in the manufacturing.
●
Risk factors, which may occur when you use the product, may be unforeseeable. Therefore, you must take full
responsibility for any damage or loss caused by all risk factors which may occur when using the product.
●
When you use the product, use good judgment; never use it under the influence of alcohol.
6. You must read and completely understand all terms and conditions of legal rights and warnings that are involved in using
the product. In addition, usage of the product constitutes acceptance of all terms and conditions regarding waiver of
rights.
Warranty Exclusions
Reasons for Limited Liabilities
If you do not return the product after purchasing it, you relinquish all rights to liabilities, loss, claims, and claims for
reimbursement of expenses (including attorney's fees). Therefore, Sena will not be liable for physical injury, death, or any loss
or damage of transportation means, possessions, or assets which belong to you or third parties that may have occurred while
you use the product. Further, Sena will not be liable for any substantial damage not related to the, condition, environment, or
malfunction of the product. All risks related with the operation of the product depend entirely on the user regardless of its use
by the initial purchaser of a third party.
Use of this product may violate local or national laws. In addition, be aware once again that correct and safe use of the
product is entirely your responsibility.
Limitation of Liability
TO THE FULL EXTENT ALLOWED BY LAW, SENA EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY,
WHETHER BASED IN CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR INCIDENTAL, CONSEQUENTIAL,
INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE OR PROFITS, LOSS OF
BUSINESS, LOSS OF INFORMATION OR DATA, OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION
WITH THE SALE, INSTALLATION, MAINTENANCE, USE, PERFORMANCE, FAILURE, OR INTERRUPTION OF ITS
PRODUCTS, EVEN IF SENA OR ITS AUTHORIZED RESELLER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES, AND LIMITS ITS LIABILITY TO REPAIR, REPLACEMENT, OR REFUND OF THE PURCHASE PRICE PAID,
AT SENA’S OPTION. THIS DISCLAIMER OF LIABILITY FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY
PROVIDED HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE. IN ANY CASE, THE TOTAL COMPENSATION
LIABILITIES OF SENA OR ITS SALES AGENTS SHALL NOT EXCEED THE PRICE PAID FOR THE PRODUCT BY THE
PURCHASER.
Liabilities Disclaimer
In addition to damages which may occur due to the use of the product, Sena will not be liable for damages of the product
which occur due to the following events.
In the event the product is misused or used for purposes other than its intended purposes.
In the event the product is damaged because the user does not follow the content of the product manual.
In the event the product is damaged because it has been left unattended or has undergone any other accident.
In the event the product is damaged because the user has used any parts or software which are not provided by the
manufacturer.
In the event the product is damaged because the user has disassembled, repaired, or modified it in such way as is not
explained in the product manual.
In the event the product is damaged by a third party.
In the event the product is damaged due to Acts of God (including fire, flood, earthquake, storm, hurricane or other natural
disaster).
In the event the surface of the product is damaged by use.
Warranty Service
To obtain product warranty service, send the defective product, at your expense, to the manufacturer or the seller along with
proof of purchase (a receipt that shows the purchase date, a product registration certificate of the Website, and other relevant
information). Take necessary measures to protect the product. In order to get a refund or replacement, you must include the
whole package as it was purchased.
Free-of-charge Service
Sena will provide free-of-charge repair or replacement service for the product when product defects occur within the scope of
the product warranty during the warranty period.
Charged Service
Sena will provide charged repair or replacement service for the product when the product warranty period has been expired
or when the product damage is beyond the scope of the product warranty. For further information on charged service, you
may contact the service center of Sena.
Return for Full Refund
Should you not agree to the terms and conditions explained above, you may return the product for a full refund. To get a
refund, within 14 days from the purchase date you must return the product to the seller in such a condition as it was
purchased.
Unless you return the product within 14 days from the purchase date, you will have read and agreed to all the terms and
conditions explained above, and Sena will not be liable for any claim for damages related with the product.
1.0.0
CERTIFICATION ET HOMOLOGATION EN TERMES DE SÉ CURITÉ
Déclaration de conformité FCC
Cet appareil est en conformité avec la partie 15 de la réglementation FCC. L'exploitation est autorisée aux deux conditions
suivantes :
(1) Cet appareil ne doit pas créer d’interférences préjudiciables et
(2) Cet appareil doit accepter toutes les interférences reçues, y compris celles qui pourraient entraver son bon
fonctionnement.
Ce matériel a été testé et déclaré en conformité avec les limites d'un appareil numérique de Classe B, suivant la partie 15 de
la réglementation FCC. Ces limites sont destinées à assurer une protection raisonnable contre les interférences
préjudiciables dans un environnement résidentiel. Ce matériel génère, utilise et peut dégager de l’énergie en radio fréquence
et, s’il n’est pas installé et utilisé en conformité avec les instructions, peut provoquer des interférences préjudiciables avec les
communications radio. Cependant, il n’y a aucune garantie que des interférences ne se produiront pas dans des installations
particulières. Si ce matériel provoque des interférences préjudiciables à une réception radio ou TV, ce qui peut être déterminé
en allumant puis en éteignant l'appareil, il est vivement recommandé à l'utilisateur d'essayer de mettre un terme à ces
interférences en prenant l'une des mesures suivantes :
Réorienter ou repositionner l'antenne réceptrice Augmenter la séparation entre le matériel et le récepteur.
Connecter le matériel à une sortie sur un circuit différent de celui sur lequel le récepteur est connecté.
Contacter le revendeur ou un technicien radio/TV expérimenté pour une assistance.
É noncé FCC sur l’exposition aux radiations RF :
Cet équipement est conforme aux réglementations FCC d’exposition aux radiations définies pour un environnement non
contrôlé. Les utilisateurs suivront les instructions d’exploitation spécifiques pour répondre aux exigences de conformité sur
l’exposition aux RF. L’antenne utilisée pour cet appareil ne doit pas fonctionner en même temps qu’une autre antenne ou
émetteur, sauf s'il y a conformité avec les procédures FCC des produits multi-émetteurs.
Précautions FCC
Tout changement ou modification apporté au matériel qui n’aurait pas été approuvé par le responsable de la conformité
pourrait invalider le droit de l’utilisateur à faire fonctionner ce matériel.
Déclaration de conformité CE
Ce produit porte un marquage CE, conformément aux dispositions de la directive R&TTE (99/5/CE). Sena déclare par la
présente que ce produit est conforme aux exigences principales et autres dispositions correspondantes de la directive
1999/5/CE. Pour plus d’informations, veuillez consulter le site www.senabluetooth.fr. Veuillez noter que ce produit utilise des
bandes de radio fréquence non uniformisées au sein de l’Union Européenne. Au sein de l’Union Européenne, ce produit est
destiné à être utilisé en Autriche, Belgique, Danemark, Finlande, France, Allemagne, Grèce, Irlande, Italie, Luxembourg,
Pays-Bas, Portugal, Espagne, Suède et Royaume-Uni et au sein de l’AELE, en Islande, Norvège et Suisse.
Déclaration de conformité IC (Industrie Canada)
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes :
(1) Cet appareil ne doit pas créer d'interférences.
(2) Cet appareil doit accepter toutes les interférences reçues, y compris celles qui pourraient entraver son bon
fonctionnement.
Licence Bluetooth
La marque et les logos Bluetooth® sont la propriété de Bluetooth SIG, Inc et toute utilisation de ces marques par Sena
s'effectue sous licence. D’autres marques et appellations commerciales sont celles de leurs propriétaires respectifs. Le
produit est conforme à et suit la spécification Bluetooth® 3.0 et a réussi tous les tests d'interopérabilité mentionnés dans la
spécification Bluetooth® . Cependant, l'interopérabilité entre l'appareil et d'autres produits Bluetooth® n'est pas garantie.
WEEE(DEEE:Déchets d'équipements électriques et électroniques)
Le symbole poubelle barrée figurant sur le produit, la documentation ou l’emballage signifie que tous les produits électriques
et électroniques, les batteries et les accumulateurs doivent être conduits en fin de vie dans une structure de récupération et
de recyclage séparée. Cette exigence s’applique à l’Union Européenne mais aussi aux autres pays où des systèmes de
récupération et de recyclage séparés existent. Pour prévenir toutes les conséquences possibles pour l’environnement ou la
santé d’une élimination de déchets non con- trôlée, veuillez ne pas considérer ces produits comme des déchets mé- nagers,
mais vous rendre dans une structure de récupération officielle pour le recyclage.
INFORMATIONS SUR LA SÉCURITÉ
Veuillez vous assurer que le produit est utilisé de manière adéquate en respectant les avertissements et précautions
énumérés ci-dessous pour éviter tout risque et/ou dommage matériel.
Rangement du produit et manipulation
Garder le produit à l'abri de la poussière. Cela pourrait endommager les pièces mécaniques et électroniques du produit.
Ne pas ranger le produit dans des zones chaudes car cela pourrait réduire la durée de vie des appareils électroniques,
endommager la batterie et/ou faire fondre les pièces en plastique du produit.
Ne pas stocker l'appareil dans des zones froides. Des changements de températures brusques peuvent former de la
condensation et endommager les circuits électroniques. Ne pas nettoyer le produit avec des solvants de nettoyage, des
produits chimiques toxiques ou des détergents puissants car cela pourrait endommager le produit.
Ne pas peindre le produit. La peinture pourrait obstruer les pièces amovibles ou interférer avec le fonctionnement normal du
produit.
Ne pas laisser tomber ou cogner l'appareil. Cela pourrait endommager le produit ou ses circuits électroniques internes.
Ne pas démonter, réparer ou modifier le produit car cela pourrait endommager le produit et annuler la garantie du produit.
Utilisation du produit
●
Dans certaines régions, la loi interdit le port d'écouteurs en étant à moto ou à vélo. Assurez-vous donc de respecter
toutes les lois correspondantes dans la région avant d'utiliser le produit.
●
L'utilisation du produit à volume élevé pendant une période prolongée peut endommager les tympans ou la capacité
auditive. Garder le volume sonore à un niveau modéré.
●
Ne pas heurter le produit ou le toucher avec des outils tranchants car cela pourrait l'endommager.
●
Ne pas utiliser le produit dans des zones chaudes ou chauffer le produit car cela pourrait occasionner des dommages
ou provoquer une explosion ou un incendie.
●
Garder le produit au sec et à l'abri de l'eau. Cela pourrait endommager le produit.
●
Tenir le produit hors de portée des animaux ou jeunes enfants. Cela pourrait endommager le produit ou provoquer
des accidents.
●
Ne pas utiliser le produit près d'un four à micro-ondes ou d'un appareil LAN sans fil car cela pourrait provoquer un
dysfonctionnement ou des interférences avec le produit.
●
Éteindre et ne pas utiliser pas le produit dans les endroits où les communications sans fil sont interdites comme les
hôpitaux ou les avions. Les ondes électromagnétiques peuvent entraîner des risques ou des accidents dans ces
endroits.
●
Ne pas utiliser le produit près d'explosifs. En cas de risques d'explosion à proximité, éteindre le produit et respecter
toute réglementation, instruction ou panneau présent dans la zone.
●
Pour des raisons de sécurité, conduire à faible vitesse (inférieure à 35 km/h) pendant l'utilisation du produit. S'assurer
en outre de respecter les lois concernant l'utilisation des appareils de communication lors de la conduite.
●
Ne pas mettre le produit à un endroit où il pourrait entraver le champ de vision du conducteur et ne pas le manipuler
durant la conduite. Cela pourrait causer des accidents de la route.
●
Avant de conduire, attacher le produit au casque et s'assurer qu'il est bien fixé. Le retrait du produit durant la
conduite peut provoquer des dommages au produit ou des accidents.
●
Si le produit est endommagé, arrêter immédiatement de l'utiliser. Cela pourrait entraîner des dommages, une
explosion ou un incendie.
Batterie
●
Ce produit contient une batterie rechargeable irremplaçable à l'intérieur. S'assurer par conséquent lors de l'utilisation
du produit de respecter ce qui suit :
●
Ne jamais séparer la batterie du produit car cela pourrait endommager le produit.
●
Les performances de la batterie peuvent s'altérer au fur à et mesure de son utilisation.
●
Pendant le chargement de la batterie, s'assurer d'utiliser un chargeur agréé fourni par le fabricant. Utiliser un
chargeur non agréé peut entraîner un incendie, une explosion, une fuite et d'autres risques et peut également réduire
la durée de vie ou les performances de la batterie.
●
Conserver la batterie à des températures entre 15 °C et 25 °C. Des températures supérieures ou inférieures peuvent
réduire la capacité et la durée de vie de la batterie ou empêcher momentanément l'utilisation de celle-ci. Ne pas
utiliser le produit en cas de températures en dessous de zéro car cela pourrait causer une réduction significative des
performances de la batterie.
●
Chauffer la batterie ou la jeter au feu peut provoquer son explosion.
●
Ne pas utiliser le produit avec une batterie endommagée. Il pourrait exploser et/ou causer des accidents.
●
Ne jamais utiliser un chargeur endommagé. Il pourrait exploser et/ou causer des accidents.
●
La durée de vie de la batterie dépend des conditions, des facteurs environnementaux, des fonctions en cours
d'utilisation du produit et des appareils utilisés conjointement.
Garantie limitée
Garantie limitée
Sena Technologies, Inc. (« Sena ») garantit la qualité du produit sur la base des caractéristiques techniques énoncées dans
le manuel du produit et les données concernant la garantie du produit. La garantie du produit s'étend ici seulement au prod uit.
Sena n'est pas responsable des pertes, blessures aux personnes ou pertes de propriétés qui pourraient résulter de
l'utilisation du produit en dehors des pièces défectueuses ou des défauts survenant en raison de problèmes lors de la
fabrication.
Période de garantie
Sena garantit le remplacement sans frais des pièces défectueuses du produit ou des défauts ayant pu survenir en raison de
problèmes lors de la fabrication pour une période de deux ans à compter de la date d'achat initiale
FIN DE LA GARANTIE
La garantie de qualité du produit prend effet le jour de l'achat initial. De plus, la garantie de qualité du produit expire lorsque
la période de garantie expire. Dans les cas suivants toutefois, la garantie prendra fin avant terme.
• Dans le cas où le produit a été vendu ou transféré à un tiers.
• Dans le cas où le nom, le numéro de série, l'étiquette du produit ou d'autres marquages du fabricant ont été modifié s ou
supprimés.
• Dans le cas où une personne non autorisée a tenté de démonter, réparer ou modifier le produit.
Avis et renonciation
En achetant et en utilisant ce produit, vous renoncez à des droits légaux importants y compris les demandes d'indemnisation
pour dommages. En conséquence, assurez-vous de lire et de comprendre les conditions suivantes avant d'utiliser le produit.
L'utilisation de ce produit constitue un consentement au présent accord et un renoncement aux droits à toute indemnisation.
Si vous ne consentez pas à toutes les conditions du présent accord, renvoyez le produit pour un remboursement. (Reportezvous à la section « Renvoi pour remboursement total ».)
1. Vous convenez que vous, vos descendants, représentants légaux, héritiers, ou cessionnaires ne ferez de votre propre gré
et, de manière permanente, de demande de procès, d'indemnisation, d'exécution, de rachat ou toute action similaire à
l'encontre de Sena concernant toute occasion comme la difficulté, la douleur, la souffrance, le désagrément, la perte, la
blessure ou le décès qui se produirait à votre encontre ou à un tiers durant l'utilisation de ce produit.
2. Vous devez parfaitement comprendre et accepter tous les risques (y compris ceux se produisant en raison de votre
négligence ou d'autres) pouvant survenir durant l'utilisation de ce produit.
3. Vous avez la responsabilité de vous assurer que votre condition médicale permet l'utilisation du produit et que votre
condition physique est suffisante pour utiliser tout appareil pouvant être utilisé conjointement. De plus, vous d evez vous
assurer que le produit ne limite pas vos capacités et que vous êtes en mesure de l'utiliser en toute sécurité.
4. Vous devez être majeur et porter la responsabilité de l'utilisation du produit.
5. Vous devez lire et comprendre les avertissements et les alertes suivantes :
●
Sena, en collaboration avec les employés, responsables, partenaires, filiales, représentants, agents, entreprises et
fournisseurs impliqués, seuls vendeurs de Sena (collectivement désignés comme « l'entreprise ») vous
recommandent, avant d'utiliser le produit et des appareils similaires de différentes marques y compris leurs modèles
dérivés, de recueillir à l'avance toutes les informations pertinentes et d'être entièrement préparé quant aux conditions
météorologiques et routières ainsi qu'à l'état de la circulation.
●
Si vous utilisez le produit tout en conduisant un véhicule tel que des
●
motos, scooters, cyclomoteurs, quatre-quatre ou quads (ci-après dénommés « moyens de transport »), vous devez
faire preuve de la plus grande prudence quel que soit l'endroit d'utilisation.
●
L'utilisation du produit sur la route peut entraîner des risques de fractures, d'invalidité grave ou de décès.
●
Les facteurs de risque, pouvant survenir lorsque vous utilisez le produit, peuvent résulter d'erreurs du fabricant, de
ses agents ou de tiers impliqués dans la fabrication.
●
Les facteurs de risque pouvant survenir lorsque vous utilisez le produit, peuvent être imprévisibles. Vous devez par
conséquent porter l'entière responsabilité pour tout dommage ou perte causée par l'ensemble des facteurs de risque
pouvant survenir lors de l'utilisation du produit.
●
Lorsque vous utilisez le produit, faites preuve de discernement ; ne l'utilisez jamais sous l'emprise de l'alcool.
6. Vous devez lire et comprendre intégralement toutes les conditions se rapportant aux droits légaux et aux avertissements
qu’implique l'utilisation du produit. L'utilisation du produit constitue en outre une acceptation de l'ensemble des conditions
concernant la renonciation des droits.
Exclusions de garantie
Raisons des limitations de responsabilité
Si vous ne renvoyez pas le produit après l'avoir acheté, vous renoncez à tous les droits de responsabilité, de pertes, de
réclamations et d'indemnisations pour le remboursement des dépenses (y compris les honoraires d'avocat). Par conséquent,
Sena n'est pas responsable des blessures physiques, décès ou pertes ou dommages des moyens de transport, possessions
ou actifs vous appartenant ou appartenant à des tiers ayant pu se produire lors de votre utilisation du produit. D'autre part,
Sena n'est pas responsable des dommages substantiels qui ne sont pas liés à l'état, à l'environnement ou au
dysfonctionnement du produit. Tous les risques associés à l'utilisation du produit dépendent entièrement de l'utilisateur,
quelle que soit son utilisation par l'acheteur d'origine ou d'un tiers.
L'utilisation de ce produit peut être contraire aux lois locales et nationales. De plus, soyez bien conscient que l'utilisation
adéquate et sans danger de ce produit relève de votre entière responsabilité.
Limitation de responsabilité
DANS LES LIMITES PERMISES PAR LA LOI, SENA EXCLUT POUR ELLE-MÊME ET SES FOURNISSEURS TOUTE
RESPONSABILITÉ CONTRACTUELLE OU DÉLICTUELLE (Y COMPRIS UNE NÉGLIGENCE) DE TOUT DOMMAGE
DIRECT, CONSÉCUTIF, INDIRECT OU PUNITIF DE QUELQUE NATURE QUE CE SOIT, OU POUR LA PERTE DE
REVENUS OU DE PROFITS, PERTES COMMERCIALES, PERTES D'INFORMATIONS OU DE DONNÉES OU TOUTE
AUTRE PERTE FINANCIÈRE RÉSULTANT DE OU EN RELATION À LA VENTE, L'INSTALLATION, L'ENTRETIEN,
L'UTILISATION, LA PERFORMANCE, LA PANNE OU L'INTERRUPTION DE SES PRODUITS, MÊME SI SENA OU SES
REVENDEURS AUTORISÉS ONT ÉTÉ AVERTIS DE L'ÉVENTUALITÉ DE TELS DOMMAGES, ET LIMITE SA
RESPONSABILITÉ À RÉPARER, REMPLACER OU REMBOURSER LE PRIX D'ACHAT PAYÉ, AU CHOIX DE SENA. CET
AVIS DE NON RESPONSABILITÉ POUR LES DOMMAGES NE SERA PAS AFFECTÉ SI UN RECOURS APPORTÉ
PRÉSENTEMENT N'ATTEINT PAS SON BUT ESSENTIEL. DANS TOUS LES CAS, LES RESPONSABILITÉS
D'INDEMNISATIONS TOTALES DE SENA OU DE SES AGENTS DE VENTE NE PEUVENT DÉPASSER LE PRIX PAYÉ
POUR LE PRODUIT PAR L'ACHETEUR.
Exonération de responsabilités
Outre les dommages pouvant survenir en raison de l'utilisation du produit, Sena n'est pas tenu responsable des dommages
du produit survenant en raison des situations suivantes.
●
Dans le cas où il est fait mauvais usage du produit ou qu'il est utilisé dans un but autre que celui prévu.
●
Dans le cas où le produit est endommagé car l'utilisateur ne suit pas le contenu du manuel du produit.
●
Dans le cas où le produit est endommagé car il a été laissé sans surveillance ou a subi un autre accident.
●
Dans le cas où le produit est endommagé car l'utilisateur s'est servi de pièces ou d'un logiciel n'étant pas fourni par le
fabricant.
●
Dans le cas où le produit est endommagé car l'utilisateur l'a démonté, réparé ou modifié d'une manière ne figurant
pas dans le manuel du produit.
●
Dans le cas où le produit est endommagé par un tiers.
●
Dans le cas où le produit est endommagé en raison d'événements imprévisibles (y compris les incendies,
inondations, tremblements de terre, tempêtes, ouragans et autres catastrophes naturelles).
●
Dans le cas où la surface du produit est endommagée pour cause d'usure.
Service de garantie
Pour faire valoir vos droits à un service de garantie du produit, envoyez le produit défectueux, à vos frais, au fabricant ou
revendeur accompagné de la preuve d'achat (un reçu indiquant la date d'achat, le certificat d'enregistrement du produit du
site internet et d'autres informations pertinentes). Prenez les mesures nécessaires pour protéger le produit. Afin d'obteni r le
remboursement ou le remplacement du produit, vous devez inclure la totalité du paquet comme au moment de l'achat.
Service sans frais
Sena offre un service de réparation ou de remplacement sans frais du produit lorsque les défauts de produit rentrent dans la
limite de la garantie du produit durant la période de garantie.
Service payant
Sena offre un service de réparation ou de remplacement payant du produit lorsque la période de garantie du produit a expiré
ou lorsque les dommages causés au produit sortent du cadre de la garantie du produit. Pour de plus amples informations sur
le service payant, vous pouvez contacter le centre de services de Sena.
Renvoi pour remboursement total
Si vous n'êtes pas d'accord avec les conditions exposées ci-dessus, vous pouvez renvoyer le produit pour un remboursement
total. Pour obtenir le remboursement, vous devez renvoyer le produit au vendeur dans le même état dans lequel il a été
acheté, dans une période de 14 jours à compter de la date d'achat.
À moins de renvoyer le produit dans une période de 14 jours à compter de la date d'achat, vous aurez lu et accepté
l'ensemble des conditions exposées ci-dessus et Sena ne sera pas responsable de toute réclamation ou dommages associés
au produit.
Hereby, SENA TECHNOLOGIES.Inc Declares that 10R is in compliance with the essential requirements and other relevant provisions of
directive 1999/5/EC.
SENA
www.sena.com
User's Guide for Firmware v1.0

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 54
Language                        : ko-KR
Tagged PDF                      : Yes
Author                          : i
Creator                         : Microsoft® Word 2010
Create Date                     : 2015:06:02 18:58:17+09:00
Modify Date                     : 2015:06:02 18:58:17+09:00
Producer                        : Microsoft® Word 2010

EXIF Metadata provided by EXIF.tools