SES imagotag EDG1-0270-B digital network transceiver User Manual My
SES-imagotag GmbH digital network transceiver My
Contents
- 1. Quick start guide
- 2. Detailed user manual
Detailed user manual
G1 Labels Product Specification Last change: 16.08.2018 G1 Labels Product Specification 1 Label Family Introduction 1.1 General Key Features 1.2 The G1 label family 2 Barcode Information 2.1 Serial Number 2.1.1 Producer is 01 2.1.2 Producer is not 01 3 Mechanical Characteristics 3.1 Technical characteristics 3.1.1 G1 1.6 BWR 3.1.2 G1 2.2 BWR 3.1.3 G1 2.6 BWR and G1 2.7 BW / BWR 3.1.4 G1 4.2 BW / BWR and G1 4.4 BW / BWR 10 3.1.5 G1 4.5 BWR 10 3.1.6 G1 6.0 BWR 11 3.1.7 G1 7.4 BW / BWR 11 3.1.8 S-tag 6 HF 12 3.2 Mechanical Dimensions 12 3.2.1 G1 1.6 BWR 12 3.2.2 G1 2.2 BWR 12 3.2.3 G1 2.6 BWR 13 3.2.4 G1 2.7 BW / BWR 13 3.2.5 G1 4.2 BW / BWR 13 3.2.6 G1 4.4 BW / BWR 14 3.2.7 G1 4.5 BWR 14 3.2.8 G1 6.0 BWR 15 3.2.9 G1 7.4 BW / BWR 15 4 Electrical & RF Characteristics 17 4.1 Power and Current Consumption 17 4.2 Transmission power 17 5 NFC 5.1 Functionality 18 18 5.1.1 Application 18 5.1.2 Redirection/Forwarding (for demo purposes only) 19 5.2 Ordering Information 6 Environmental 19 20 6.1 General 20 6.2 Cleaning Instructions 20 6.3 Humidity Conditions 20 7 Storage and warehousing 21 8 Battery lifetime 22 Page 2 of 31 G1 Labels Product Specification 9 Battery Replacement 23 9.1 Audience 23 9.2 Instructions 23 9.3 Steps 23 9.3.1 G1 1.6 BWR 23 9.3.2 All labels except G1 1.6 BWR 23 10 Reliability Test Items 24 11 Certifications 25 11.1 Types 25 11.2 Overview 25 11.3 Applied Standards 25 11.4 Declaration 26 11.4.1 FCC 26 11.4.2 IC 26 11.4.3 IFT 26 11.4.4 NCC 警語: 26 12 Packing 27 12.1 G1 1.6 BWR 27 12.2 G1 2.2 BWR 27 12.3 G1 2.6 BWR 27 12.4 G1 2.7 BW / BWR 28 12.5 G1 4.2 BW / BWR 28 12.6 G1 4.4 BW / BWR 28 12.7 G1 4.5 BWR 29 12.8 G1 6.0 BWR and G1 7.4 BW / BWR 29 13 Intended Use 30 14 Improper Use 31 Page 3 of 31 G1 Labels Product Specification Label Family Introduction The SES-imagotag electronic shelf label family offers high-quality display options, operating with a replaceable battery, thus working without any external power supply. The performance of the labels (updates per hour) depends on the mode of the access point. In the USA and Canada the AP-2010 usa/canada bundle incl. antenna with limited data efficiency is required (based on the FCC/IC regulation). 1.1 General Key Features 2.4 GHz proprietary radio protocol Radio coverage: up to 25 meters Bi-directional communication 11 available communication channels Ultra-low power consumption Customer-replaceable battery Full graphical e-Ink display with paper-like readability Different configurations available (theft protection, display protection, LED flash) Label versions for deep-freezing environments Super wide viewing angle (nearly 180 degrees) Flexible mounting options available May be used in landscape and portrait mode Fast response time (less than 15/30 seconds, depends on wakeup time) 128-bit AES encryption with secure key exchange Multiple pages support with preloading and fast page switching Integrated Passive NFC tag Page 4 of 31 G1 Labels Product Specification 1.2 The G1 label family The SES-imagotag G1 BWR label family is capable of changing all pixels to black, white or red. The current line-up has display sizes from 1.6 inch to 12.2 inch. Caption Display Res- Density Display Useable olution (dpi) Colors Pages Active Display Area (mm) Updates/hour/AP (standard / FCC&IC mode) Battery lifetime: 5 years with N updates per day G1 1.6 BWR NFC 152 x 152 140 b/w/r 4* 27.5 x 27.5 7500/4600 G1 2.2 BWR NFC 212 x 104 111 b/w/r 4* 48.6 x 23.8 8500/5000 G1 2.6 BWR NFC 296 x 152 125 b/w/r 4* 60.1 x 30.7 4500/2600 G1 2.7 BW NFC 264 x 176 117 b/w 8* 57.3 x 38.2 5000/2700 G1 2.7 BWR NFC 264 x 176 117 b/w/r 4* 57.3 x 38.2 4500 G1 4.2 BW NFC 400 x 300 120 b/w 4* 84.8 x 63.6 3000/1600 G1 4.2 BWR NFC 400 x 300 120 b/w/r 4* 84.8 x 63.6 2000/1300 G1 4.5 BWR NFC 480 x 176 117 b/w/r 4* 104.2 x 38.2 2500/1500 G1 6.0 BWR NFC 600 x 448 129 b/w/r 4* 114.9 x 85.8 900/500 G1 7.4 BW NFC 480 x 800 126 b/w 12* 97 x 161.6 1000/500 G1 7.4 BWR NFC 480 x 800 126 b/w/r 4* 97 x 161.6 600/300 6* 190.08 x 237.60 300/150 G1 12.2 BWR NFC 768 x 960 103 b/w/r *One useable page is shared with the registration code page. This page is initially shown when the label is shipped. After registration this page can be used as a custom page. To restore the original content a service utility is required. To prevent accidentials overwrite this page is protected. To unlock this page contact the SES-imagotag support team. The content of all pages except page number 0 won't remain after a firmware update. Page 5 of 31 G1 Labels Product Specification Barcode Information The labels come with a label ID (which is a unique identifier – just like a MAC address) and this label ID as a barcode on the display (and printed on the back of the label). The label ID consists of 8 hexadecimal digits (0-9 / A-F). The first 2 digits identify the different label types, shown on the following table: 2.1 Caption G1 1.6 BWR NFC Label-ID F1xxxxxx G1 2.2 BWR NFC A5xxxxxx G1 2.6 BWR NFC B6xxxxxx G1 2.7 BW NFC B3xxxxxx G1 2.7 BWR NFC G1 4.2 BW NFC G1 4.2 BWR NFC B5xxxxxx C7xxxxxx C5xxxxxx G1 4.4 BW NFC C1xxxxxx G1 4.4 BWR NFC G1 4.5 BWR NFC G1 6.0 BWR NFC C4xxxxxx C6xxxxxx D4xxxxxx G1 7.4 BW NFC D1xxxxxx G1 7.4 BWR NFC D3xxxxxx Product Code R16N01xxx R22N01xxx R22N02xxx R26N01xxx R26N02xxx G1Bxxxxxx B27N01xxx R27N01xxx B42N01xxx R42N01xxx G1Cxxxxxx B44N03xxx R44N01xxx R45N01xxx R60N01xxx G1Dxxxxxx B74N05xxx B74N03xxx R74N01xxx Model Code EDG1-0160-A EDG1-0220-A EDG1-0260-A EDG1-0270-B EDG1-0270-B EDG1-0420-A EDG1-0420-A EDG1-0440-A EDG1-0440-A EDG1-0450-A EDG1-0600-A EDG1-0740-A EDG1-0740-A Serial Number Depends on Producer (A) Page 6 of 31 G1 Labels Product Specification 2.1.1 Producer is 01 Part Description Producer Format Example Comment Specified by SESimagotag once for each fab 2 alpha 01 Product family Product version Source 3 alpha G1B 3 alpha 301 Product revision 3 alpha 001 Separator Internal Year “-“ 1 alpha B 1 dec Week 2 dec 10 Weekday 1 dec Internal 5 dec 00060 Incremented on every change of product specification Specified by SESimagotag in the product specification document Fixed Internal 4=2014, 5=2015,... Calendar week in current year (01-53) Calculated during production Continuous Serial Number (Counter) Format: AABBBCCCDDD-EFGGHIIIII Example: 01G1B301001-B410300060 2.1.2 Producer is not 01 Part Description Format Example Producer alpha Product family Product version alpha alpha Product revision alpha Separator Year Week “-“ alpha 2 dec Internal 6 dec 000065 Comment Source Specified by SESimagotag once for each fab 02 R22 N01 N = with NFC 001 Incremented on every change of product specification Specified by SESimagotag in the product specification document Fixed E=2014, A=2010, B=2011,.. 13 Continuous Serial Number (Counter) Format: AABBBCCCDDD-EFFGGGGGG Example: 02G1B302001-E13000065 Calculated during production Note: Calendar week date is calculated according to ISO 8601 (see http://en.wikipedia.org/wiki/ISO_ week_date) Page 7 of 31 G1 Labels Product Specification Mechanical Characteristics 3.1 Technical characteristics The G1 labels are made of several external parts: 1. Battery Cover including a. Label ID b. Label ID barcode c. S/N 2. Battery pack / Coin cell 3. Main Unit including a. Back Cover b. PCB c. Display d. Transparent Front Cover 4. Front Cover Frame a. Customizable in design and color b. Replaceable 3.1.1 G1 1.6 BWR Page 8 of 31 G1 Labels Product Specification 3.1.2 G1 2.2 BWR 3.1.3 G1 2.6 BWR and G1 2.7 BW / BWR Page 9 of 31 G1 Labels Product Specification 3.1.4 G1 4.2 BW / BWR and G1 4.4 BW / BWR 3.1.5 G1 4.5 BWR Page 10 of 31 G1 Labels Product Specification 3.1.6 G1 6.0 BWR 3.1.7 G1 7.4 BW / BWR Page 11 of 31 G1 Labels Product Specification 3.1.8 S-tag 6 HF 3.2 Mechanical Dimensions 3.2.1 G1 1.6 BWR Outline (mm): 49 x 36.8 x 14.8 Weight: 24 g 3.2.2 G1 2.2 BWR Outline (mm): 70.2 x 35.8 x 15.85 Weight: 38 g Page 12 of 31 G1 Labels Product Specification 3.2.3 G1 2.6 BWR Outline (mm): 83.6 x 42.5 x 16.3 Weight: 45 g 3.2.4 G1 2.7 BW / BWR Outline (mm): 85.7 x 50 x 16.6 Weight: 50 g 3.2.5 G1 4.2 BW / BWR Outline (mm): 114.9 x 88.9 x 17.4 Weight: 104 g Page 13 of 31 G1 Labels Product Specification 3.2.6 G1 4.4 BW / BWR Outline (mm): 114.9 x 88.9 x 17.4 Weight: 104 g 3.2.7 G1 4.5 BWR Outline (mm): 132.6 x 50.9 x 16.4 Weight: 78g Page 14 of 31 G1 Labels Product Specification 3.2.8 G1 6.0 BWR Outline (mm): 149.0 x 111.1 x 15.0 Weight: 139g 3.2.9 G1 7.4 BW / BWR Outline (mm): 186.9 x 125.9 x 19.3 Weight: 239 g Page 15 of 31 G1 Labels Product Specification Page 16 of 31 G1 Labels Product Specification Electrical & RF Characteristics 4.1 Power and Current Consumption The power supply are 1, 2 or 3 cell-button batteries. The following table will give you a short overview about all kinds of labels and their batteries. Battery lifetime 5 years Battery Operating Nominal Wakeup Caption with N (Seconds) Type Voltage capacity updates per day G1 1.6 BWR NFC 1x CR2450 3V 550 mAh 30 G1 2.2 BWR NFC 2x CR2450 3V 1100 mAh 15 G1 2.6 BWR NFC 2x CR2450 3V 1100 mAh 15 G1 2.7 BW NFC 2x CR2450 3V 1100 mAh 15 G1 2.7 BWR NFC 2x CR2450 3V 1100 mAh 15 G1 4.2 BW NFC 2x CR2450 3V 1100 mAh 15 G1 4.2 BWR NFC 3x CR2450 3V 1650 mAh 15 G1 4.4 BW NFC 2x CR2450 3V 1100 mAh 15 G1 4.4 BWR NFC 3x CR2477 3V 3000 mAh 15 G1 4.5 BWR NFC 3x CR2450 3V 1650 mAh 15 G1 6.0 BWR NFC 3x CR2450 3V 1650 mAh 15 G1 7.4 BW NFC 3x CR2477 3V 3000 mAh 15 G1 7.4 BWR NFC 3x CR2477 3V 3000 mAh 15 Note: battery lifetime can vary depending on the operating conditions of the labels (temperature, radio usage etc…) see Battery lifetime on page 22 4.2 Transmission power Each label has got a transmission power of ≤ 10 dBm (according to the FCC certification). Page 17 of 31 G1 Labels Product Specification NFC All labels can be ordered with the NFC option. Labels with integrated NFC tag can be identified by the nameplate on the back of the label. FIGURE 1-1: Label with integrated NFC chip 5.1 Functionality If you put your NFC reading device on a label with integrated NFC chip, you will be automatically redirected to the following URL: https://nfc.imagotag.com/[e.g. https://nfc.imagotag.com/A5004824] FIGURE 1-2: NFC redirection to nfc.imagotag.com This URL/information can be used as follows: You can use if for your own developed application or redirection/forwarding to a specific URI (for demo purposes only). 5.1.1 Application A mobile application could extract the label ID information from the NFC tag. Based on the label ID, the application could get further details about the matched article and e.g. show this details via push. The required application needs to be developed by the customer. Example - Digital camera accessories A customer starts the mobile application and put his/her smartphone next to the label with integrated NFC chip which belongs to a digital camera. The developed application retrieves the product information data from the ESL system and pushes matching accessories for this digital camera model to his/her smartphone. Example - Recipe information Page 18 of 31 G1 Labels Product Specification A customer starts the mobile application and put his/her smartphone next to the label with integrated NFC chip which belongs topasta. The developed application retrieves the product information data from the ESL system and pushes corresponding recipes to his/her smartphone. 5.1.2 Redirection/Forwarding (for demo purposes only) If you don't want to develop your own application to handel NFC readings there's the possibility to request a redirection for your specific NFC label range to a URI of your choice. Currently this functionality is just for demo purposes. In future we will provide an service for it. Example - Customer's website You have bought a number of NFC tags and want to redirect to its website when reading the tags. Write an email with your forwarding request (relevant labels, customer, URI) to support.at@sesimagotag.com. The support team will manage the request and gives you feedback as soon as the forwarding works. E.g. Customer XY, G1 2.7 BWR NFC labels with IDs: B501ABC1, B501B324, forward to http://www.myownwebsite.com 5.2 Ordering Information Please contact our sales team for ordering information and pricing at sales@ses-imagotag.com. Page 19 of 31 G1 Labels Product Specification Environmental 6.1 General Temperature black/white labels l 0° C to + 45° C black/white/red labels l 10° C to 40° C optimal operating temperature at 21 ° C. Humidity: 10% to 80% (non-condensing) 6.2 Cleaning Instructions Clean the electronic label with the help of a damp cloth. Note: Do not use liquid or aerosol cleaners and keep it away from water. 6.3 Humidity Conditions Notes: High humidity combined with low temperature are not recommended Low temperature will reduce the battery lifetime Page 20 of 31 G1 Labels Product Specification Storage and warehousing We strongly recommend to observe the following points in order to ensure the best operation, functioning and battery lifetime: Storage temperature l -10° C to 40° C l Optimal operating and storage temperature at 21 ° C Humidity l 10% to 85% (non-condensing) It isn't allowed to operate an SES-imagotag AP-2010 or LANCOM access point in the warehouse or in radio coverage area. l Permanent connection attempts the label to the access point leading to high battery consumption FIFO (First In First Out) l Differ on base of the package IDs The maximum storage time of labels should not exceed 0.5-1 year If you not comply with these limits mentioned above, the specified battery runtime can vary. Page 21 of 31 G1 Labels Product Specification Battery lifetime For the definition of N update/day following requirements apply to reach the specified lifetime: The radio sync quality between labels and access points has to be “PERFECT” or “GOOD”. l To comply with these specifications, a Site Survey according to SES-imagotag GmbH guidelines is necessary. The declared number of updates per day is an average value applied on the specified lifetime. l It’s not allowed to exceed this number more than 20 updates per day. The most of the time the operation temperature of the labels has to be 21° C. To reach the specified lifetime, the requirements regarding see Storage and warehousing on page 21 also needs to be observed. Performing less than specified updates doesn't extend the battery lifetime significantly. Page 22 of 31 G1 Labels Product Specification Battery Replacement 9.1 Audience Only persons with the following knowledge are allowed to replace the battery: 9.2 Instructions 9.3 Battery Electronic assemblies like circuit board Compliance of the instructions Risk of explosion through incorrect battery replacement. Use battery pack exclusive provided from the company SES-imagotag GmbH. Keep attention that your hands are dry before you start with the replacement. Don’t use sharps to open the label. Don’t use your fingernails to open the label. Don’t touch the circuit board of the open label. Steps 9.3.1 G1 1.6 BWR 1. 2. 3. 4. 5. 6. 7. 8. Press a coin in the coin slot on the back side of the label (hidden behind the nameplate). Turn the coin with pressure contraclockwise. Take away the battery cover. Take out the coin cell. Put in the new coin cell. Put the battery cover back on the label. Press a coin in the coin slot on the battery cover and turn it clockwise. Check if the power status of the label switch to "GOOD" otherwise contact the SES-imagotag support (support.at@ses-imagotag.com). 9.3.2 All labels except G1 1.6 BWR 1. G1 2.2 BWR, G1 2.6 BWR and G1 2.7 BW / BWR: Press both snap-in-mounts of the battery cover (backside of the label) until the battery cover detaches. Afterwards take the battery cover from the label. G1 4.2 BW / BWR, G1 4.4 BW / BWR, G1 4.5 BWR, G1 6.0 BWR and G1 7.4 BW / BWR: Use the SES-imagotag battery opener tool to open the battery cover. Afterwards take the battery cover from the label. 2. Pull the white plug out of the socket, don’t pull on the cable. 3. Take out the battery pack. 4. Put in the new battery pack. 5. Push the white plug in the socket. 6. Put the battery cover on the label casing (the arrows have to show to each other) 7. Check if the power status of the label switch to "GOOD" otherwise contact the SES-imagotag support (support.at@ses-imagotag.com). We can also provide some battery replacement videos, for more information about that please contact the SES-imagotag support (support.at@ses-imagotag.com). Page 23 of 31 G1 Labels Product Specification 10 Reliability Test Items High Temperature Operation Low Temperature Operation High Temperature/Humidity Operation High Temperature Storage Low Temperature Storage High Temperature/Humidity Storage Temperature Shock (Storage) Package Drop Test Package Random Vibration Test Food Contact Test Page 24 of 31 G1 Labels Product Specification 11 Certifications 11.1 Types Housing, board and the display are conform with the ROHS Directive The product meets the EU safety, health and environmental protection requirements and has the approval of CE marking This device complies with part 15 of the FCC Rules. Passed all tests according to “FOOD CONTACT” requirements 11.2 Overview Caption G1 1.6 BWR NFC G1 2.2 BWR NFC G1 2.6 BWR NFC G1 2.7 BW NFC G1 2.7 BWR NFC G1 4.2 BW NFC G1 4.2 BWR NFC G1 4.4 BW NFC G1 4.4 BWR NFC G1 4.5 BWR NFC G1 6.0 BWR NFC G1 7.4 BW NFC G1 7.4 BWR NFC RoHS • • • • • • • • • • • • • Food Contact • • • • • • • • • • • • • CE FCC/IC •3 •3 •3 •2 •3 • •3 •2 •3 •3 •3 •2 •3 •4 •4 •4 •1 •4 •4 •4 •1 • • •1 •4 1FCC/IC certified since calendar week 9 / year 2015 (the FCC logo must be printed on the nameplate) 2R&TTE EN 300328 V1.8.1 3R&TTE EN 300328 V1.9.1 4FCC/IC certified starting calendar week 50 / year 2015 (the FCC logo must be printed on the nameplate) 11.3 Applied Standards Information Technology Equipment EN 60950-1/A2:2013 UL 60950-1/A2:2014 CSA CAN/CSA-C22.2 NO.60950-1-07 EMV EN 301489-17 V2.2.1 R&TTE EN 300328 V1.8.1 / EN 300328 V1.9.1 Human Exposure to Electromagnetic Fields EN 62479:2010 Page 25 of 31 G1 Labels Product Specification Radio international FCC: 47 CFR Part 15 (USA) RSS-210 Issue 8 (Canada) 11.4 Declaration The company SES-imagotag GmbH declares on his own responsibility that the G1 labels correspond to the standards mentioned above. 11.4.1 FCC This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the authority to operate the equipment. 11.4.2 IC This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. 11.4.3 IFT RCPSEM016-1628-A3“La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada.” 11.4.4 NCC 警 語 : 經型式認證合格之低功率射頻電機,非經許可,公司、商號或使用者均不得擅自變更頻率、 加大功率或變更原設計之特性及功能。 低功率射頻電機之使用不得影響飛航安全及干擾合法通信;經發現有干擾現象時,應立即停 用,並改善至無干擾時方得繼續使用。 前項合法通信,指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工 業、科學及醫療用電波輻射性電機設備之干擾。 Page 26 of 31 G1 Labels Product Specification 12 Packing 12.1 G1 1.6 BWR DIMENSIONS STACKING QUANTITY LENGTH WIDTH HEIGHT BOX 445 245 100 LAYER / UNIT 10 PALLET 1200 800 140 BOXES / LAYER UNIT 800 1140 BOXES / UNIT 60 1200 SETS / BOX SETS / LAYER SETS / UNIT 100 600 6000 Purchase Unit: 100 labels / box Minimum Order Quantity: 6000 12.2 G1 2.2 BWR DIMENSIONS STACKING QUANTITY LENGTH WIDTH HEIGHT BOX 445 245 100 LAYER / UNIT 10 PALLET 1200 800 140 BOXES / LAYER UNIT 800 1140 BOXES / UNIT 60 1200 SETS / BOX SETS / LAYER SETS / UNIT 100 600 6000 Purchase Unit: 100 labels / box Minimum Order Quantity: 6000 12.3 G1 2.6 BWR DIMENSIONS STACKING QUANTITY LENGTH WIDTH HEIGHT BOX 400 270 135 LAYER / UNIT PALLET 1200 800 140 BOXES / LAYER UNIT 800 1355 BOXES / UNIT 72 1200 SETS / BOX SETS / LAYER SETS / UNIT 80 640 5760 Purchase Unit: 80 labels / box Minimum Order Quantity: 5760 Page 27 of 31 G1 Labels Product Specification 12.4 G1 2.7 BW / BWR DIMENSIONS STACKING QUANTITY LENGTH WIDTH HEIGHT BOX 400 270 135 LAYER / UNIT PALLET 1200 800 140 BOXES / LAYER UNIT 800 1355 BOXES / UNIT 72 1200 SETS / BOX SETS / LAYER SETS / UNIT 80 640 5760 Purchase Unit: 80 labels / box Minimum Order Quantity: 5760 12.5 G1 4.2 BW / BWR DIMENSIONS STACKING QUANTITY LENGTH WIDTH HEIGHT BOX 400 260 250 LAYER / UNIT PALLET 1200 800 140 BOXES / LAYER UNIT 800 1390 BOXES / UNIT 40 1200 SETS / BOX SETS / LAYER SETS / UNIT 60 480 2400 12.6 G1 4.4 BW / BWR DIMENSIONS STACKING QUANTITY LENGTH WIDTH HEIGHT BOX 400 260 250 LAYER / UNIT PALLET 1200 800 140 BOXES / LAYER UNIT 800 1390 BOXES / UNIT 40 1200 SETS / BOX SETS / LAYER SETS / UNIT 60 480 2400 Purchase Unit: 60 labels / box Minimum Order Quantity: 2400 Page 28 of 31 G1 Labels Product Specification 12.7 G1 4.5 BWR DIMENSIONS STACKING QUANTITY LENGTH WIDTH HEIGHT BOX 395 300 155 LAYER / UNIT PALLET 1200 800 140 BOXES / LAYER UNIT 800 1380 BOXES / UNIT 64 1200 SETS / BOX SETS / LAYER SETS / UNIT 80 640 5120 Purchase Unit: 80 labels / box Minimum Order Quantity: 5120 12.8 G1 6.0 BWR and G1 7.4 BW / BWR DIMENSIONS STACKING QUANTITY LENGTH WIDTH HEIGHT BOX 570 260 250 LAYER / UNIT PALLET 1200 800 140 BOXES / LAYER UNIT 800 890 BOXES / UNIT 18 1200 SETS / BOX SETS / LAYER SETS / UNIT 40 240 720 Purchase Unit: 40 labels / box Minimum Order Quantity: 720 Page 29 of 31 G1 Labels Product Specification 13 Intended Use The G1 electronic shelf label family is exclusively designed to connect to AP-2010, MAP-2014T or LN-830E of the company SES-imagotag GmbH via radio. The device may only be used in areas where the environmental conditions be the same as described in the chapter see Environmental on page 20. Page 30 of 31 G1 Labels Product Specification 14 Improper Use Any use that is not mentioned in Section Intended Use (see Intended Use on page 1), shall be deemed to be improper. Any damage which result from improper use, the operator will assumes liability. The following usage is not allowed: Never dismantle the electronic device because except battery there is no component which could be changed by someone who is not qualified. Don't drop it. Keep it away from water. Strictly avoid direct contact with groceries. Don’t use the electronic device with defective parts. Don’t use the electronic device with spare parts and accessories which are not examined and approved by the SES-imagotag GmbH. Unauthorized changes or modifications to the electronic device and their components without the consent of SES-imagotag GmbH are not allowed. Don't heat, recharge or bend battery. We take no responsibility for stolen labels without encryption. Keep away batteries from children. Don't throw defective batteries into the dustbin. Give them to a reprocessing company. Don't throw electronic device into the dustbin. Give them to a reprocessing company. Contact SES-imagotag GmbH for more details about this process. Page 31 of 31
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Page Count : 31 Page Mode : UseOutlines Language : en-us Producer : madbuild Create Date : 2018:08:16 13:37:20+02:00 Modify Date : 2018:08:16 13:37:20+02:00 Title : My Document Author : kac Subject :EXIF Metadata provided by EXIF.tools