SEVEN LIKE BTH02 Bluetooth Thermometer User Manual 20170220 BTH02 UM V1 curve

Download:
Mirror Download [FCC.gov]
Document ID	3508735
Application ID	0hdgcGMQsP6Y4aUxic0Qqg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	Yes
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	30.12kB (376455 bits)
Date Submitted	2017-08-11 00:00:00
Date Available	2017-08-14 00:00:00
Creation Date	2017-02-20 15:17:06
Producing Software	Adobe PDF library 10.01
Document Lastmod	2017-08-10 22:10:56
Document Title	20170220 BTH02 UM V1 curve
Document Creator	Adobe Illustrator CC (Macintosh)

Bluetooth Thermometer
Temcerature is Evervthina!
M del No.: BTH02
。
Instruction
Congratulations on your purch臼e of the Professional Smart Food Thermometer, an APP suppo巾d food
thermometer.You will now be able t
motely m nitor the temperatu
f cooking food and the temperatu
inside your grill, oven or smoke「 from your sma眈 m bile devices.
。陪
c。mp。nents
。
。
陪。
Features
1. LCD display
2. On/OFF
3. Ta用副厅imer+
4. Ta咱副厅imer 5. Battery Compartment
1.One smart thermometer unit.
2.One universal magnet base.
3.Tw detachable stainless steel
probes with steel mesh cable.
4.Three AAA ba忧eries.
。
陪
合〕在
LCD Screen
1.Current temperatu陪 Probe 1
2.Ta咱创temperatu『e Probe 1
3.Current temperature Probe2
4.Target temperatu陪 Probe2
5.πme『 1
6.Timer2
�需� <:=)
创始 。 。
。 。
忱。 。 。
Count d。w
， nTi er
1.Ch。。 se Timer 1 or Timer2, P陪ss+t。 your adjust timer setting.
『n
。何
。
。
忱。
，可C
26� 176
。
。
。
陪
忱。
。
Backlight
I w rking condition, pre：臼＋ t turn on backlight and -t turn off backlight.Using the backlight will 锦t up a I t
of p wer.If not necessary, the rec mmendati n is to turn
backlight.
Helpful Hints
1.Do not immerse the probe in water while cleaning.
2.D not use m副al probe in Microwave oven.
3.D not allow the probe or probe wire to contact with flames.
4. Avoid probe touching bone r heavy fat areas.It might 臼use termp四.tu陪 display seems increase too fast.
。
。
。
。
。
。
。何
。
。
。
Measure meat恒mperatu陪 to USDA d neness恒mperature range
Set from APP
1.Tape the Probe 1 r Probe2 meat setting ic n.
2.Sel臼t m倒t type BEEF, Lamb, Pork, Turkey, Fish， 创c.
3.Choose Gourmet or USDA standard temperature, then the ta咱et temperature will be send to smart device.
4.Once the temperature of meat Probe 1 or Probe2 陪aches the d neness level, the sma此device will beep.
Press any bu n to st p the beep.
。 。
。
陪
2. If you need to set up very long timer count down timer, h d
I +t increase and press -to deduct.
3.Leave the button for2 sec nds, the T imer will be set automatically. tI suppo眈999 minutes.
4.When countdown timer aches 0 , an alarm will beep.P ss any bu n to st p the beep.
Note: Smart Device count down timer is 臼parated with APP Timer just to avoid the confict.
。。
Turn On/i
Unit
ON-Press 3 seconds to turn ON the sma民device.
OFF-P陪ss 3 seconds to turn OFF the sma此device.
①
Set from device
1. You can use two probes (Probe 1 and Probe2) to measu用 and monitor temperatu用s of two pieces of meat or
tw，。
ti ns f the same la咱e piece of meat at the same time.
2.P『ess MODE to select Probe 1 or Probe2, then press +- to choose your ta�et temperature.Leave it for2
seconds, the target temperature will be s创automatically and sh w n the display.
3.Once the tem阴阳:tu阻。f meat Probe 1 or Probe2 reaches the doneness level, the smart device will beep.Press
any bu n t st p the beep.
。
Cau髓。ns:
1.D not expose the receiver or transmitter t di陪ct heat.
2.K，锦p the stainless steel probe sensor and wires away from child『审I.
3.D not touch the hot probe with bare hands.Wear a heat resistant gl ve to during r a阳r c king.
4.D not use in the rain.Smart Device is not waterproofed.
5.D not immerse the probe in water while cleaning O『 using dish washer to clean probe.Clean them with damp
cloth.
。
。
。
。，
。
。
。。
LIMITED NE-YEAR WARRANTY
Cappec war阳nts this product to be协e of defects in pa巾， materials and w rkmanship for a peri d of ne year,
from date of purchase.
Sh uld any repairs or servicing under this warranty be required, contact Customer Service by email for instruc­
tions on how to pack and ship the product to Cappec.
而is war阻nty gives y u specific legal rights and you may also have ther rights which vary from剖ate to state.
。
。 。
。
。
。
OC:00.00 日户
唱r
Customer Service:
。
。
Email: SUDD rt@cacoec.c m
FCC Warning:
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this
equipment.
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement. Th
e device can be used in portable exposure condition without restriction.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Create Date                     : 2017:02:20 15:17:06+08:00
Creator                         : Adobe Illustrator CC (Macintosh)
Modify Date                     : 2017:08:10 22:10:56+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Creator Tool                    : Adobe Illustrator CC (Macintosh)
Metadata Date                   : 2017:08:10 22:10:56+08:00
Thumbnail Width                 : 256
Thumbnail Height                : 180
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 19917 bytes, use -b option to extract)
N Pages                         : 1
Has Visible Transparency        : True
Has Visible Overprint           : False
Max Page Size W                 : 430.828650
Max Page Size H                 : 303.315306
Max Page Size Unit              : Millimeters
Plate Names                     : Cyan, Magenta, Yellow, Black, PANTONE 877 C, PANTONE 199 C
Swatch Groups Group Name        : 默认色板组
Swatch Groups Group Type        : 0
Swatch Groups Colorants Swatch Name: PANTONE 877 C
Swatch Groups Colorants Type    : SPOT
Swatch Groups Colorants Tint    : 100.000000
Swatch Groups Colorants Mode    : LAB
Swatch Groups Colorants L       : 59.607800
Swatch Groups Colorants A       : -1
Swatch Groups Colorants B       : -1
Format                          : application/pdf
Title                           : 20170220 BTH02 UM V1 curve
Rendition Class                 : proof:pdf
Document ID                     : xmp.did:1d17c950-205f-441a-88e8-1f8a9b830b92
Instance ID                     : uuid:4be1a1c6-c3cc-461a-9999-b25fd7869afd
Original Document ID            : uuid:24afd8a0-c0df-c140-b176-4d084d9c7663
Derived From Instance ID        : xmp.iid:683146a0-fe04-4359-bf6a-a8597c4e1ce7
Derived From Document ID        : xmp.did:683146a0-fe04-4359-bf6a-a8597c4e1ce7
Derived From Original Document ID: uuid:24afd8a0-c0df-c140-b176-4d084d9c7663
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved, editedScannedDoc
History Instance ID             : xmp.iid:339ad56c-4a49-48c0-82ab-f7c148792be6, xmp.iid:1d17c950-205f-441a-88e8-1f8a9b830b92
History When                    : 2016:11:17 12:22:34+08:00, 2017:02:20 15:17:03+08:00, 2017:08:10 16:01:06+08:00
History Software Agent          : Adobe Illustrator CC (Macintosh), Adobe Illustrator CC (Macintosh)
History Changed                 : /, /
History Parameters              : Page:1
Manifest Link Form              : EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference
Manifest Reference File Path    : /Users/Benny/Desktop/Cappec/Cappe APP/2016 修改/2016 CAPPEC APP V5 iPhone6Ps 15.jpg, /Users/Benny/Desktop/Cappec/Cappe APP/2016 修改/2016 CAPPEC APP V5 iPhone6Ps 11.jpg, /Users/Benny/Desktop/Cappec/Cappe APP/2016 修改/2016 CAPPEC APP V5 iPhone6Ps 10.jpg, /Users/Benny/Desktop/Cappec/Cappe APP/2016 修改/2016 CAPPEC APP V5 iPhone6Ps 9.jpg
Producer                        : Adobe PDF library 10.01
Page Count                      : 2

EXIF Metadata provided by EXIF.tools