SHANTOU YESTE ELECTRONIC AND TECHNOLOGY Y9 Bluetooth speaker User Manual

SHANTOU YESTE ELECTRONIC AND TECHNOLOGY CO.,LTD Bluetooth speaker Users Manual

UserManual.wiki >

SHANTOU YESTE ELECTRONIC AND TECHNOLOGY >

Users Manual

2．International advanced bluetooth chip and circuit design techniques, support all bluetooth device ; play music after pairing with bluetooth device .for example mobile/ MID/ TV, the working distance is within25M. 3．with Mic for hands-free phone call function. 4．Built-in MP3/WMA decoding, can directly play TF card, U disk, mobile and other USB storage devices stored MP3, WMA format music files. 5．Build-in the FM radio module, convenient to auto scan and save radio channels. 6．Support LINE IN audio input, connect bluetooth speaker through output devices, for example MP3,MP4,PSP,tablet pc, mobile phone,etc. key & slot function: ⑦⑨⑧⑥

1．Power switch: off to close, on is working. 2．DC 5V:use the standard mini USB V8 charging cable for power charging. 3．MICRO SD slot: it can decode and play MP3 format audio when put Micro SD card into the slot 4．USB slot: it can decode and play MP3 format audio when put USB card into the slot 5．Eadphone output Speaker will automatically turn off while listening by earphone without interfering others and continuing wonderful music 6．When play music, press short to switch USB/TF/FM /bluetooth/line in . 7．Press short for last song, press long to turn down the volume. 8．Press short for next song, press long to turn up the volume. 9．When play music(USB card/ TF card/LINE IN/ bluetooth), press short for "play/pause ". under bluetooth mode with mobile paired , press short to answer a call , press again to hand up, press twice to ring up a call. press ②③ ① ④ ⑤

long to disconnect Bluetooth( at this moment press shortly to connect again). in FM mode, press short to search station automatically, press again to stop searching. 10．LED display： display the playing details. NOTE: Under FM mode, put in the AUX cable to get better FM radio station FCC NOTE： This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS OR CHANGE TO THIS EQUIPMENT. SUCH MODIFICATIONS OR CHANGE COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. RF:exposure statementThis equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.