SHAREVISION IP007 Low power Wireless Battery Camera /Doorbell User Manual Users manual

Download:
Mirror Download [FCC.gov]
Document ID	3940296
Application ID	rFs9LuP2CQyGbXPOfp1ZqQ==
Document Description	Users manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	430.1kB (5376263 bits)
Date Submitted	2018-07-26 00:00:00
Date Available	2018-07-26 00:00:00
Creation Date	2018-06-13 10:08:39
Producing Software	Adobe PDF library 10.01
Document Lastmod	2018-07-13 15:56:23
Document Title	DC01电池摄像机说明书-英文-0519改
Document Creator	Adobe Illustrator CS6 (Windows)

Click to add the Equipment
Packing List
After opening the package, please check the door bell (the
“Equipment”) to verify whether the following parts are complete.
AC Input
Power is supplied to the equipment by installing
the AC input supply hole on the mounting bracket.
Reset Button
Equipment working status,long press 5 seconds
to restore factory settings.
Battery Compartment Mounting 18650 specification battery.
Fixed Hole
Fit the support on the wall with the mounting
screws for the mounting kit.
AC Input Hole
The power supply of the equipment can be
supplied by connecting the hole and the
AC /DC12-24V power supply on the wall.
Securily Screw Hole
Mounting the security screw on the fittings
to prevent the equipment from being removed.
Equipment
Low power Wireless Battery
Camera /Doorbell
XF-IP007
(including the installation support)
Tamper Button
Quick
Quick Guide
* Before using the product, please read the Quick Guide carefully
and keep it well.
Screw Package
(including Screw)
When the doorbell and the doorbell cover are
separated, The Phone will receive a alarm message.
Start Gu
ideline
Click to install the lens
3 Press the reset button for 5 seconds, waiting for
the indicator light to slow down( The equipment
should be in working condition, long press, sleep
state is invalid)
4 Mounting two 18650 specification batteries
and the bracket, push down and lock the
security screws to complete the installation
Equipment Connection
Before setting, ensure that the
Equipment is in the configuration
status. Under the configuration
status, there will be a voice
prompt to “enter the
configuration status”
If no prompting voice is heard,
please press the Reset Button for
5 seconds and wait until the LED
is OFF, and then release it. The
Equipment will be restarted to
enter the configuration status
Thanks for choosing our product. To start with, scan the following
QR codes to install the app. After completion, set up your Equipment
by following the steps below
3.Instructions on Use of Equipment
1) In the List of Equipment interface, click the Setting icon at the
upper-right corner of the Equipment to enter the setting interface
of the Equipment
1.Download the Mobile App
Set up
Open the call reminder, when someone presses the
power button or calling, you can receive a reminder, And
you will not receive the reminder after turn it off
Call reminding
Call reminding
QR code
删除设备
Deleting
equipment
Installation Guide
As shown in the figure, install the stand
If the Equipment is already set up, and you expect to
share it with friends and family members, you may
choose to send the QR code to them
QR code
iOS APP
Android APP
USB Interface
AC Input
The setting is done. The Equipment
will automatically enter the List of
Equipment interface.
Congratulations! The Equipment
has been successfully installed
5 Cover the battery cover, align the equipment
Quick Start Guide
Appearance
The Equipment has been
connected with the network.
Please enter the name and
password of the Equipment.
The password must be at least
8 characters long (including
upper case letters, lowercase
letters and digits) (the password
listed is for reference only)
1) Scan the QR codes to download it
2) For Apple users, search “UBell” in the App Store to download it
3) For Android users, search “UBell” in Google Play to down
the app
Tamper Button
Reset Button
Battery Compartment
Securily Screw Hole
1 Use the screws in the mounting kit to fit
the bracket on the wall
2 Connect the external power cord to the
Fixed Hole
AC Input Hole
AC ecternal power supply hole
2.Setting up New Equipment
Power on the Equipment and wait for the system voice prompting:
“Enter the Configuration Status”. (If not in this status, please press
and hold the Reset Button for 5 seconds after waking up the
Equipment, and release it after the Equipment’s LED is OFF. The
system is automatically restarted.) After the Equipment enters the
configuration status, please ensure that the cell phone is connected
to the available WiFi. After that, open the “UBell” app to install the
doorbell lens
The app will automatically
complete the name of the WiFi.
Please input the corresponding
WiFi password, turn up the
volume, and then click “Next”.
If this is the second time you
are connecting to the same
WiFi, the app will automatically
complete the password. It is
not necessary to re-enter the
password
The cell phone will send out a
sound wave. Please keep quiet
at this moment. Please put the
cell phone 30cm away from the
Equipment, and wait for the
Equipment to configure the
network
Delete the Equipment in the List of Equipment. After
deletion, the Equipment will not be in the List, and calling
will not be received any more, but the lens will not be
affected. The Equipment can still be checked by other
connected cell phones
Note: If used in a higher traffic environment, OFF or Lowered
Sensitivity is suggested in order to reduce the waking up of the
Equipment and call times, thus prolonging the battery life
4.Attention!
1) The Equipment uses a polymer battery. When charged full, it is
estimated to last 6 months. When it is running out of power, the cell
phone app will prompt you. Please recharge the Equipment in a
timely manner after receiving the prompt
2) During installation, please ensure that the network is normal in the
installation environment, and especially outdoors, please check
whether WiFi covers the area. In the case of a weak WiFi signal, it
is required to add a WiFi signal relay amplifier
3) This device is a low-power consumption smart product that can
support APP remote wake-up, PIR human detection wake-up and
press the power button to wake up,
Every 15 seconds after awaken it will automatically go to sleep
mode until the next wake up
Technical Parameters
Resolution
1280* 720
Field of Angle View
166° (opposite angle)
LED
6 lights, 850mm
Wi-Fi
802.11b/g/n supported
Audio
Two-say talk, with echo removal
function
Recording
TF Card (15 seconds/time)
Storage
8G/16G/32G
Battery
two 18650 batteries, 6800mAh
Push
Quick push for 2 seconds to wake up
for 600ms
Prompting
Press/PIR/cell phone positive
waking up
power
Standby current 120uA/working current
170uA
Working Temperature
-10℃ ~+50℃
删除设备
Deleting
equipment
Instructions on PIR
The PIR function is supported. To activate it, just choose PIR in the
setting menu
Inactivated
- In this status, PIR is closed
Lowered Sensitivity
- In this status, continuous 7-second body induction will
wake up the recording of the Equipment and call the
cell phone
Moderate Sensitivity
- In this status, continuous 5-second body induction will
wake up the recording of the Equipment and call the
cell phone
High Sensitivity
- In this status, continuous 1-second body induction will
wake up the recording of the Equipment and call the
cell phone
Q&A
Q:Why can’t the Equipment be connected to WIFI?
A: 1. Please confirm that the WiFi connection is under the 2.4G
protocol.
2. Confirm that the Blue Indicator Light is blinking slowly.
3. Check whether the account name and password are correct,
and whether there are excessive spaces.
Q: The Equipment is online, and there is a trigger event, but the cell
phone doesn’t receive any push messages
A: Check whether the app has “automatic starting” activated, and
whether the “application authority” has the notification function
activated.
Disable “battery optimization” and “close the app when in the
background and Always On Display” (depending upon the actual
situations, considering different optimization modes for different
cell phone manufacturers)
Q:What kinds of power supply modes are supported?
A:1. Equipment can work with 18650 battery alone
2. Can charge the device via USB, When connected with USB
it will be turned on
Q: Does the Equipment support 3G?
A: 3G cell phones are not supported, only 4G is supported
Introduction to Functions
Li-ion battery can be used for 6~8 months
HD pixels matched with a 1.7mm wide-angle lens
Cell phone waking up supported
2.4G WiFi connection supported
Clear two-way audio
Advanced PIR motion detecting distance up to 5m
Automatic switching of Day&Night mode, night vision
detecting distance up to 5m
Tip: There will be no further notification of any change of the above
functions. Please take the actual object as the standard. Thanks!
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation. Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note 1: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
Note 2: 1.Changes or modifications to this unit not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
2. The minimum separation generally be used is at least 20 cm.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Has XFA                         : No
Warning                         : Metadata object (12 0 obj) not found at 562274
Page Count                      : 2
Creator                         : Adobe Illustrator(R) 16.0
For                             : Administrator,
Title                           : 门铃摄像机说明书-英文-0613.pdf
Create Date                     : 6/13/2018 11:54 AM
Bounding Box                    : 0 0 1747 530
Container Version               : 11
Creator Version                 : 16
Modify Date                     : 2018:07:13 15:56:23+08:00
Producer                        : Adobe PDF library 10.01
Image Height                    : 530
Image Width                     : 1747
Image Size                      : 1747x530
Megapixels                      : 0.926

EXIF Metadata provided by EXIF.tools