SHEN ZHEN HIDIN TECHNOLOGY KS501 WI-FI Home Automation Products User Manual

Hidin Tech Co., Ltd WI-FI Home Automation Products

UserManual.wiki >

a href="https://usermanual.wiki/SHEN-ZHEN-HIDIN-TECHNOLOGY" itemprop="url"> SHEN ZHEN HIDIN TECHNOLOGY >

KS501 User Manual >

User Manual ⚡ Mobile Version

User Manual

Smart Socket User ManualTechnological Specifications：Rated Current：10A(Max)Rated Voltage：AC100V~240V(50-60Hz)Rated Power：2200WUSB Output：5V/1AWireless Standard：IEEE802.11b/g/nWorking frequency：2.412~2.462MHzSafety：WEP/WPA-PSK/WPA2-PSKEncryption：WEP/AES/TKIPStatic power loss：<0.3WWorking Temp：-20゜C～75゜C Humidity：10%-80%Dimensions：　73x69x36.5MMGift box size ：96x93x78MMUnit package：Gift BoxUnit weight： 100gAccessories：　User Manual Warranty CardFunction introduction：1、Remote control 2、Timing switch function3、USB 4、ON/OFF5、Universal Scoket2、Open APP and login. Firstly should registered account( android system the same as IOS system),after registered successful then log in app.（Please choose your country area code then enter the phone number (ex: China +86) when you registered.　）AndroidIOS system operation interfaceIOS APP have some differences1、Login in APP and click“+”Search add the devicePilot lamp status1、Red Pilot light is continous brightness：socket is connect normally2、Green Pilot light is continous brightness：socket closed3、Green pilot light flash quickly： socket is connecting the network.4、Green pilot light flash slowly：connection failure or network is cut offDownload APP1、Scan below Qrcode or scan Qrcode onthebox name: e-welink IOS system please download from APP store name: e-welinkIOS3、Please make sure your home network is working , phone and wifi connect success.----If network is not working or you phone cannot connect with wifi, you will not connect success with wifi socket Smart socket introductionPilot LampPower plug hole USBON/OFFPower plug12345678Need manual switch WIFI connection TIEAD-100000XXXHome WIFI anmeNext2、Long press the socket on/off 5 seconds, when Green Pilot light is continous brightnes,choose the wifi name ITEAD(ex:ITEAD-1000xxx), Password is 12345678, connect success, pleas click confirmed. Go to next step.3、Now please back choose your home wifi and input the password connect success .4、Now if the socket green light brightness ,socket is connect success.5、Change the device name ,click complete pairing.Remote control Share the devicesTiming settingRemote control Share the devicesTiming settingAndroid system operation interface126877: Connect success with socket----Rename the socket (P2)the name use alphanumeric is better,do not use special symbols.8: If the socket offline,please make sure if the wifi account and passwords are correct and search add device when the green light flash quickly (90 seconds) ,If make sure 2 step all no problem still offline,please after 2 mins search add device again.34910 1154、When the green light flash slowly ---long press the on/off button 5seconds----the green light flash quickly （90seconds），now socket is connecting the network.5、Login in App search add device.6、If search the socket success go to next step input the wifi account and passwords (please remember the passwords) check (P1)P1 P2Home WIFI namePassword Your can change the device nameNeed manual switch WIFI connection Home WIFIHome WIFI

FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Download:
Mirror Download [FCC.gov]
Document ID	2941379
Application ID	RcdHZ32MVz9ZYrm+plg1wg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	141.7kB (1771248 bits)
Date Submitted	2016-03-25 00:00:00
Date Available	2016-03-25 00:00:00
Creation Date	2015-12-22 10:24:44
Producing Software	Adobe PDF library 9.00
Document Lastmod	2016-03-21 20:00:02
Document Title	User Manual
Document Creator	Adobe Illustrator CS4

FCC ID Filing: 2AHREKS501

Navigation menu