SHENGLAI TECHNOLOGY VF50013BT Bluetooth Headphones User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3665737
Application ID	r9Czx4utt9EyJQoWAJD2tw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	336.92kB (4211444 bits)
Date Submitted	2017-12-07 00:00:00
Date Available	2017-12-07 00:00:00
Creation Date	2017-11-27 18:31:53
Producing Software	Adobe Acrobat 7.0 Image Conversion Plug-in
Document Lastmod	2017-11-27 18:31:57
Document Title	User Manual
Document Creator	Adobe Acrobat 7.0

SLAI
FABRIC
COLLECTION
BLUETOOTH
HEADPHONES
069
BLUETOOTH CONTROL
MUSIC
@O
ANSWER RECHARGEABLE
CALLS BATTERY
VF50013BT
USER'S MANUAL
FCCID: 2ALQB-VF500133T
A Quick Look at Your Device
1. ON/OFF / Answer Call / Play/Pause 4. LED Indicator Light
2. Previous Track / Volume - 5. Charging Port
3. Next Track / Volume + 6. Auxilliary Port
7. Microphone
Maintenance and Care
-Before using your headphones, inspect the ports to make sure that they are clear of dust and
debris before charging.
-Use a soft cloth to clean your headphones. Never use any harsh chemicals or detergents. Make
sure your headphones are dry before using.
-When your headphones are not in use, they should be stored in a cool, dry place.
-Never tug or yank on the charging cable while it is connected to your headphones. Connect and
disconnect this cable as carefully as possible.
-Never expose your headphones to high temperatures, extreme cold, high humidity or excessive
moisture or water.
—Please recycle or dispose of your headphones properly based on the laws and rules of your
municipality. Contact local recycling facilities and/or the manufacturer of your headphones for
further information.
VIVITAR'
Charging Your Headphones
Your headphones have a built-in, rechargeable lithium ion battery. To avoid damage, do not
attempt to remove the battery. The full performance of the battery is only achieved after a few
charging-discharging cycles. Charge the battery fully before first use. To do so, follow the steps
below:
1. Connect one end of the included Micro USB charging cable to the charging port on your
headphones. Then plug the other end of the charging cable into a USB port on your computer or
a suitable power adapter in order to recharge the internal rechargeable battery.
NOTE: The internal battery of your headphones takes approximately two hours to charge when
completely drained.
2. When the battery is charging, the LED indicator light will turn red. The LED indicator light will
turn blue when the battery is fully charged. Unplug when charging is complete.
NOTE: Overcharging could reduce the life of the battery. A charged battery will lose its capacity
if it is not used on a regular basis.
Important!
To avoid a complete discharge of the battery, charge your headphones at least once every six
months.
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—— Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV technician for help.
8602
Important Safety Precautions
When using your Vivitar Bluetooth Headphones, basic safety precautions should always be followed, including the
following:
1. READ ALL INSTRUCTIONS BEFORE USING YOUR HEADPHONES.
2. Do not use your headphones near water. Clean using a dry or slightly moist cloth.
3. Do not place your headphones on any wet surfaces.
4. Do not allow children or the infirm to play with your headphones without adult supervision.
5. Do not expose your headphones to excessive heat, flames or fire.
6. Always press all buttons or switches carefully. Do not manhandle your headphones.
7. Do not use in extremely dry environments, as this can lead to static discharge during usage.
8. Do not expose your headphones to temperatures above 40°C. Keep out of direct sunlight.
9. Do not attempt to repair this product yourself. Contact a qualified service center if your headphones are in
need of service.
10. Do not drop, puncture or expose your headphones to excessive trauma.
11. Your headphones are not intended for commercial use.
12. Unplug this device when not in use for long periods of time or during lightning storms.
13. Do not place near objects that generate a strong magnetic field.
BATTERY WARNING:
-The device is equipped with an integrated lithium ion battery. The
ACAUT'ON battery cannot be replaced. Do not attempt to remove the battery
from the device.
-Do not dispose of in fire or expose to excessive heat.
-Do not crush, puncture. incinerate, or short circuit external contacts.
-Please recycle or dispose of the battery properly. Contact your local
recycling facilities and/or the manufacturer for further information.
Pairing Your Headphones with a Bluetooth Device
Your headphones can be paired with most Bluetooth devices including iPads, iPhones, iPod
Touches, and most smartphones, laptops and tablets. In order to pair your headphones with a
phone, follow the steps below:
1. Press and hold the ON/OFF button in order to power on your headphones. Once your
headphones are powered on, the LED indicator light will alternately blink red and blue. This
indicates that your headphones are in pairing mode.
2. Go to the Bluetooth Manager of your Bluetooth device.
3. Search Bluetooth devices and select "Vivitar headphones” to start connecting.
4. Enter "0000" if your device asks for the PIN code.
5. Once paired, the LED indicator light will stop blinking and steadily shine blue. Note that
anytime music is playing, the light will slowly blink blue every few seconds.
Vivitar One Year Warranty
This warranty covers the original consumer purchaser only and is not transferable.
This warranty covers products that fail to function properly UNDER NORMAL USAGE, due to
defects in material or workmanship. Your product will be repaired or replaced at no charge for
parts or labor for a period of one year.
What Is Not Covered by Warranty
Damages or malfunctions not resulting from defects in material or workmanship and damages or
malfunctions from other than normal use, including but limited to, repair by unauthorized parties,
tampering, modification or accident.
To Obtain Warranty Service and Troubleshooting Information:
Call 1-800-592-9541 in the US. or 0-800-917-4831 in the UK or visit our website at
www.vivitar.com.
To receive Warranty service along with the name and address of an authorized product service
center, the original consumer purchaser must contact us for problem determination and service
procedures. Proof of purchase in the form of a bill of sale or receipted invoice, evidencing that the
product is within the applicable Warranty period(s), MUST be presented in order to obtain the
requested service. It is your responsibility to properly package and send any defective products
along with a dated copy of proof of purchase, a written explanation of the problem, and a valid
return address to the authorized service center at your expense. Do not include any other items
or accessories with the defective product. Any products received by the authorized service
center that are not covered by warranty will be returned unrepaired.
Introduction
Thank you for purchasing your Vivitar Bluetooth Headphones, item VF5001SBT. You can use your
headphones with iPads, iPhones, iPods and many other types of smartphones and Bluetooth
devices to stream music and enjoy hands-free calling. In order to get the best results when using
this device, please read this manual first before using.
Package Contents
-Vivitar VFSOOISBT Bluetooth Headphones
-User’s Manual with Warranty Information
Specifications
Bluetooth Specification: v4.2
Bluetooth Range: Up to 33 Feet (10 Meters)
Charging Input: DC 5V
Battery Type: 160mAh Lithium Ion Battery
Charge Time: Approximately 2 Hours
Play Time: Approximately 4 Hours"
‘Applicable at 40% of maximum volume. Results will be lower when volume is higher.
Using Your Headphones
Powering Your Headphones On and OFF
1. Press and hold the ON/OFF button in order to power on your headphones. If you have paired
your headphones to your Bluetooth device previously, they will automatically remain paired each
time you power on your headphones.
2. Press and hold the ON/OFF button in order to power off your headphones.
Listening to Music
- Play/Pause Button : Press to play or pause a track.
- Press and hold the “NEXT TRACK/VOLUME UP" button to advance to the next song in a playlist.
- Press and hold the "PREVIOUS TRACK/VOLUME DOWN" button to go back to the previous
song in a playlist.
- Quickly tap the "NEXT TRACK/VOLUME UP" button to increase the volume.
- Quickly tap the "PREVIOUS TRACK/VOLUME DOWN" button to decrease the volume.
Using the Phone Function
- Last Number Re-dial: Double tap the Answer Call button to re-dial the last number called.
- Answering a Call: Quickly press the Answer Call button to answer an incoming call.
- Reject an Incoming Call: Press and hold the Answer Call button to reject an incoming call.
- Ending a Call: Quickly press the Answer Call button to end a call.
Auxiliary Input Mode
To use your headphones with devices that are not Bluetooth enabled, plug one end of a standard
3.5mm audio cable into the Auxiliary Port on your headphones. Plug the other end into the
headphone jack on your audio device.
Vivitar One Year Warranty (continued)
NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY
IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE,
OTHER THAN THOSE EXPRESSLY DESCRIBED ABOVE SHALL APPLY. DISTRIBUTOR FURTHER
DISCLAIMS ALL WARRANTIES AFTER THE EXPRESS WARRANTY PERIOD STATED ABOVE. NO
OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR ENTITY WITH
RESPECT TO THE PRODUCT SHALL BE BINDING ON DISTRIBUTOR. REPAIR, REPLACEMENT,
OR REFUND OF THE ORIGINAL PURCHASE PRICE - AT DISTRIBUTOR’S SOLE DISCRETION
-ARE THE EXCLUSIVE REMEDIES OF THE CONSUMER. IN NO EVENT WILL DISTRIBUTOR, ITS
MANUFACTURERS, OR SAKAR INT. BE LIABLE FOR ANY INCIDENTAL, DIRECT, INDIRECT,
SPECIAL, PUNITIVE OR CONSEQUENTIAL DAMAGES (SUCH AS, BUT NOT LIMITED TO,
DAMAGES FOR LOSS OF PROFITS, BUSINESS, SAVINGS, DATA OR RECORDS) CAUSED BY THE
USE, MISUSE OR INABILITY TO USE THE PRODUCT. EXCEPT AS STATED HEREIN, NO OTHER
WARRANTIES SHALL APPLY. NOTWITHSTANDING THE FOREGOING, CONSUMER’S RECOV-
ERY AGAINST DISTRIBUTOR SHALL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT
SOLD BY DISTRIBUTOR. THIS WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN
THE ORIGINAL CONSUMER WHO PURCHASED THE PRODUCT AND IS NOT TRANSFERABLE.
Some countries, states or provinces do not allow the exclusion or limitation of incidental or
consequential damages or allow limitations on warranties, so limitation or exclusions may not
apply to you. This warranty gives you specific legal rights, and you may have other rights that
vary from state to state or province to province. Contact your authorized retailer to determine
if another warranty applies. This product is manufactured, distributed and sold by SAKAR
International, Inc. All other trademarks are the property of the respective owner, who has not
sponsored, endorsed or approved this product.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : 3.1-701
Modify Date                     : 2017:11:27 18:31:57+08:00
Create Date                     : 2017:11:27 18:31:53+08:00
Metadata Date                   : 2017:11:27 18:31:57+08:00
Creator Tool                    : Adobe Acrobat 7.0
Format                          : application/pdf
Document ID                     : uuid:ad608af8-0091-4329-ab4f-b62e3ae7219d
Instance ID                     : uuid:808b627f-b071-4b0e-b3ee-fbd957fb5cc1
Producer                        : Adobe Acrobat 7.0 Image Conversion Plug-in
Page Count                      : 1
Creator                         : Adobe Acrobat 7.0

EXIF Metadata provided by EXIF.tools