SHUOYING U0101 UMPC User Manual Manual

SHUOYING INDUSTRIAL (SHENZHEN) CO., LTD. UMPC Manual

Manual

11. Description of appearanceProduct structure:EarphoneDC inUSB portUSB portHDMI portSD card slotOTG portthernet portPower keyTouch panelSpeaker
2Get readyStatement: This Company is committed to continuous improvement of product quality, andthe software version will be updated from time to time. In case of any functionalinconsistency of finally delivered products with the description in this manual, please refer tothe finally delivered products. Thank you for your understanding!2.1 Battery chargingThe pad has a built-in battery. Charging will be recommended by the system when the batterylevel is low.Power adapterOne end of the adapter is connected to an outlet, and the other end to the pad’spowerjack,tocharge the device. (It is strongly recommended to use the power adapter supplied to avoiddamage.)Charging method:1. Plug in power adapter, and the battery charging indicator turns red, indicating the battery isbeing charged. When the battery is fully charged, the indicator shows green. Plug out the adapterand the indicator will extinguish.2. During charging, the user may still use the pad.2.2 Use of storage cardInsert storage card:Indicator for direction keyCaps indicatorIndicator for numeric keyWorking indicatorCharging indicatorWIFI indicator
3Insert the storage card into the slot, and press the card into it with a finger until a click is heard.The top left of the screen will read: Preparing storage card.Browse the files on the storage card:Start “My pad”procedure to show all files under the root directory. Select “Storage card 1”andopen it to browse the contents of the card.Draw the storage card:Close all files opened on the card. Click menu to select “Setting –Internal storage of the storagedevice –Storage card 1 –Unload the storage card”, and the system will pop up a prompt: “Thestorage card removed successfully”. Press it lightly to bounce a portion of the card, and then takeit out of the slot. The top left of the screen will read “The storage card removed successfully”.Precautions:1. The card shall be inserted into right position, or it may be damaged;2. Please do not forcedly draw the storage card from slot without “unloading the storage card”,to avoid any damages to the card;3. It is recommended to use the storage cards of main brands, to avoid incompatibility of cards.2.3 Hot plugging of the storage card and external USB diskPlease do not hot plug the storage card or external USB disk while using or browsing the files onthem. Directly plugging out of the storage card or external USB disk whose files are beingbrowsed or used in such software as My video, My music and My photos may damage the cardand disk, and may also automatically exit the procedure for the purpose of self-protection. For theplugging of the storage card, please refer to “2.2 Use of storage card”. Close all files being usedbefore plugging out of the external USB disk.2.4 Storage spaceThe device has three storage spaces: internal memory, USB disk and storage card. The device’sinternal storage will not be displayed; the file name of the storage card displayed is “SD card 1”;and the file names of the external USB disk are “USB 1”and “USB 2”. The storage space for thesystem is used for storing system files only; the total internal storage space is 4B; and the space ofUSB disk and storage card depends on their capacity, with 32GB at most.For specific information about memory, please refer to 8.7 Storage card and device storage.2.5 Start-up and shutdown1. Start- up: When the battery power is sufficient, press and hold the power key for 2 seconds tostart up the device. After start-up, enter main interface directly;2. Shutdown: Press and hold the power key (for 4 seconds) and a shutdown confirmation interfacewill pop up.
4Click “Power off”toshutdownthedevice.PressESCkeytoreturntooperationinterfaceforfurther use.Click “Silent mode” to enter silent mode or close silent mode.3. Sleep: Press and hold the power key (for 2 seconds) to enter sleep status, where the LCD willdim out. Under sleep status, press the power key to wake it up. If the battery level is very lowunder sleep status, the device will shutdown automatically after start-up for saving energy.3. Input operation3.1 KeyboardWhile using procedures or files that require input text and numbers, you may use the keyboard toinput them.Note: The device supports external USB keyboard, but some keys may fail to work when you usesuch external USB keyboard.3.2 Touch panelThe touch panel can sense the moves of your fingers. Following operations are available:Note: Please do not place any object on the surface of the touch panel, for it may scrape or pressthe panel.Click: Select an icon, and click the left mouse key to choose a desired icon or item.Press and hold: Select an icon, and press and hold the left mouse key to choose the icon. You mayalso drag it down to the shortcut bar on the bottom of the desktop for display.Drag: You may drag an icon on the desktop to move among different pages within target interface.You may also drag the application procedure icon to the shortcut bar.3.3 MouseThe device supports external USB mouse. When the USB mouse was inserted, you may click,select, drag, slide and right click to pop up the function menu.4. Desktop
54.1 Status barThe top of the screen is status bar. There is a software button on the left of the status bar, andanother 6 on the right. They are Homepage button, Manual refresh button, Screen capture button,Volume +/- button, Menu button, and Return button. The status bar also displays systeminformation including 3G signal intensity, WI-FI signal intensity, Ethernet status, battery status,and time.4.2 Main interfaceThe main interface procedure of the pad includes two modes: desktop widget mode andapplication procedure icon mode, which may be switched through the button of the shortcut center.The main interface of the desktop widget mode is shown as below:Click the button on the shortcut bar to enter the interface of application procedure iconmode. The main interface of the application procedure icon mode is shown as below:Click toreturn toHomepageRefresh multi-mediaScreen captureVo l u m e -Vo l u me +MenuReturn
6Click button to return to the interface of the desktop widget mode.4.3 ShortcutOn the main interface of the desktop widget mode, press Menu key or click the menu buttonon the status bar, and a menu shortcut will pop up on the lower part of the screen. Themenu includes Add widget, Wallpaper, Notifications, and Settings as shown in the followingpicture:4.4 Shortcut to add widget1. Add window widgetTo add window widget to the main screen, please press “Menu –Add –Window widget”. Choose
7a window widget to add it to the main screen. After that, click the shortcut icon to executecorresponding shortcut operations.4.5 Use of desktop widgetThe user may add, delete or install desktop widget, may add or delete application procedure icons,may also remove and adjust the position of icons, and may also drag icons within working area orbetween working area and shortcut bar, add or delete icons as well.On the main interface of the desktop widget mode, press and hold the widget icon, and a bin markwill pop up in the right center. At this moment, you may drag this icon to any position on thedesktop, or directly drag it into the bin to delete it.5. Web browsingThe device may be connected to the Internet via a browser.Click the icon on the desktop to open web browsing function. When the web wasopened, an interface pops up as below:
8WebPhotoPeripheryNewsMoreRestaurantCafeBarMoreFailed to get location information updateLog-inSetting HelpSelect Google impression Mobile/TraditionalPrivacy right6. Introduction to typical application6.1 E-mailClick the E-mail icon to enter E-mail mode. Set your E-mail account number, and thenoperate as below:1. Create a new E-mail;2. Receive and send E-mails; and3. Download or open attachments.Tip: Press Menu key to pop up shortcut menu as shown below:
91. Refresh the current folder: Re-scan this folder2. Compose a new E-mail: Send a new E-mail3. Folder: Switch among different folders4. Accounts: When more than one account is added, the user may select one from them5. Account settings: The regular settings of accounts6.2 File browsingClick My pad icon to enter file browsing interface.After entering browsing interface, you may choose from many browsing manners, and copy, cut,paste, create, rename or delete files on LOCAL, SD 1, and USB disk.
10Procedure installingTo install software in the file browser, you just need to click the installation file whose fileextension is .APK. An installation prompt box will pop up. Select installation to install theprocedure onto the device.6.3 GalleryClick the gallery icon to enter gallery interface, as shown below:1. After entering the gallery, press the right mouse key to pop up shortcut menu, to select all,cancel “Select all”, share, delete, or check photo information.
112. To enter full screen mode, click the thumbnails of pictures on the gallery interface.Click the screen, and Photographic Transparencies will pop up. There are two options on the menu:zoom in or zoom out, which can be achieved by clicking the icon. Click the above “Menu”ordirectly press the right mouse key, and the following three options will pop up:1) Share: Select G-mail or E-mail to share pictures2) Delete: Directly delete pictures3) Check more: Click it, and five options will pop up: Detail, Set, Cut, Rotate anticlockwise andRotate clockwise. The pictures may be set as wallpaper or contact icon. To check detailedinformation about picture, click “Detail”.6.4 MusicClick icon to enter music interface. You may choose from Music, Favorite andMy list in the Music Base.Click a song to enter playing interface.32541
126.4.1 Search: Click it to search songs6.4.2 List: Include Music, Favorite and My List.6.4.3 Add: Click it to add new list6.4.4 Button: Click to choose Play/Pause, Previous/Next song.6.4.5 Display mode: Include Song, Artist and Album6.4.6 Volume progress bar: Use it to adjust volume6.4.7 Star index: Songs over three stars will be classified into “My List”6.4.8 Click icon to enter shuffle play mode; click icon to switch between “Repeatall”and “Repeat one”modes.6.4.9 Return: Click it to return to music interface6.4.10 Searching LRC: Click it to connect web and search for desired lyrics (WIFI or cablednetwork is required)6.5 Video playerClick icon to enter the interface of video player.761098
136.5.1 Search: Click it to search for video6.5.2 List: Include Movies, Favorites and History6.5.3 Check mode: Click it to shift to movie check modeClick video directly to play. Click the image while playing, and a play menu will pop up, asshown below:Press to stop.Star index: Songs over four stars will automatically be classified intoMyFavorites.Play/Pause, Previous/Next sectionVolume progress bar6.6 eReaderClick icon to eReader.123
146.6.1 eReader icon: Click it to read e-books6.6.2 Import & Edit: Click “Import”to add the files on disk into the list; click “Eidt”to deletebooks from the list6.7 CalenderClick icon to enter calender interface, only available for devices that exchangeaccounts.After entering the interface, you may manage the agenda. Press the right mouse key, and a menuwillpopup. Andthenoperateasbelow:12
151. Check modes available: Day, Week, Month, Agenda, Today (today’s agenda), and More (Clickit to create a new calender, check calender and set calender)2. Press and hold the date with left mouse key, and a menu will pop up; you may check agenda oradd new one to it6.8 Sound recorderClick icon to enter sound recorder interface.12
166.8.1 Status: While recording, the light will turn red6.8.2 Click to start recording; click to stop recording, and click to listen tothe sound recorded.After recording, press to pop up a dialog box as shown below:Click “Use this recording” to save the message recorded (as shown below); and click “Discard”todiscard the message recordedWhile saving message, you may choose the recording name and path7 Tips and skills
177.1 Convenient settings7.1.1 Wi-Fi connectionClick icon to enter Wi-Fi settings interface, as shown below:Tick the WIFI check box, and the computer will automatically search for wireless network.1. All APs searched will be listed. Click the AP name to be connected to.2. If such AP was connected before, the AP information will be saved. Select“Connecting”to start connecting; select “Forget” to delete AP information.3. If such AP is not encoded, click “Connecting”in the window to start connecting.4. If such AP is encoded, input password in the window and click “Connecting”tostart connecting.5. After the WI-FI was connected, the status bar on top of the desktop will appear aWIFI icon.Note: Please select appropriate wireless network in accordance with actual situation.7.1.2 Ethernet connectionAfter the device was connected to Ethernet via the Ethernet port, click icon to enterEthernet settings interface, as shown below:
18Tick Ethernet check box, and the computer will automatically search for IP to connect it to thenetwork.You may also use static IP. Tick “Use static IP”check box and set all parameters to connect.7.2TipsforbatteryuseThe device will consume a lot of power due to its broad screen. To extend the use life of thebattery, you may reduce the frequency of using following functions:1. Watch movies and listen to music2. Brightness: Please press “Menu key –Settings –Sound and Display (Display settings) –Brightness”to reduce the brightness.3. Network searching: Please press “Menu key –Settings –WIFI network –WIFI connection –WIFI settings –Network notification”.8. Personalized settingsTo enter personalized settings, click icon on shortcut menu.8.1 Wireless networkWIFIConnect WIFI networkTo set and manage WIFI port, please press “Menu key –System settings –Wireless network –WIFI settings”.For more details, please refer to 7.1.1 WIFI connection under Convenient settings.8.2 Cabled networkConnect the device to wideband network or Ethernet.For more details, please refer to 7.1.2 Cabled network under Convenient settings.8.3 Sound
19Set ringtone, notification and volumeSilent modeTo set all sounds except alarm clock in silent mode, please press “Menu –System settings –Sound –Silent mode”.A.M.Sound settingsSilent modeSilence all sounds exclude alarmsVo l u meNotificationsNotification ringtone
20FeedbackAudible selectionPlay sound when making screen selectionVo l u meMediaAlarmNotificationOK CancelMedia volumeTo set music and video volume, please press “Menu key–System settings –Sound –Vo l u m e–Media volume”.Alarm clock volumeTo set music and video volume, please press “Menu key–System settings –Sound –Vo l u m e–Alarm clock volume”.Notification ringtoneTo set default notification ringtone, please press “Menu key–System settings –Sound –Vo l u m e –Notification ringtone”.Select operating soundTo play sound when making screen selection, please press “Menu key–System settings –Sound – Audible selection”.8.4 DisplayA.M.Display setting
21BrightnessAnimationNot display window animationScreen overtimeAdjust the delay time before the screen automatic lockingBrightnessTo adjust the brightness of the screen, please press “Menu key–System settings –Display–Brightness”.AnimationTo display the animation effect of all or partial windows, please press “Menu key–Systemsettings –Display -- Animation”.Screen stand-byTo adjust the delay time before the screen automatic locking, please press “Menu key–System settings –Sound –Vo l u m e –Media volume”.8.5 Location and securityUse wireless networksTo check location using wireless network in application procedure, please press “Menu key –System settings –Location & security –Use wireless networks”.Visible passwordsTo make the passwords visible while inputting, please press “Menu key –System settings –Location & security –Visible passwords”; when the setting is completed, the passwords will bevisible upon inputting.8.5 Application procedures
22Click it to the interface of application proceduresA.M.Application procedure settingUnknown sourceAllow installing application procedures not supplied by economic marketManage application proceduresManage and delete the application procedures installedRunning servicesCheck and control the currently running serviceUnknown sourceTick the check box to allow installing application procedures not supplied by economicmarket.Manage application proceduresTo manage and delete the application procedures installed, please “Menu key –Systemsettings – Application procedures –Manage application procedures”.Running servicesTo check and control the currently running service, please press “Menu key –System settings–Application procedures –Running service”.8.6 Account and synchronizingClick the icon to enter account and synchronizing setting interface
23A.M.Account and synchronizing settingRegular synchronizing settingBackground dataThe application procedures may allow synchronizing, sending and receiving data.Self synchronizingThe application procedures may automatically synchronize data.Manage accountAdd accountBackground dataThe application procedures may allow synchronizing, sending and receiving data.Self synchronizingThe application procedures may automatically synchronize data.Add accountClick it to add Google, Skype, and company account.8.7 SD card and internal device storageCheck available space
24Storage device (SD card and USB disk)To check and operate the storage device, e.g. unmount, please follow “Menu key–Settings–SD card and device internal storage" to select desired storage device under the directory of storagedevices, e.g. storage card 1. Enter the storage device interface to check its total space and availablespace, or unmount the device. The interface is shown as below:Internal device storageTo check the internal device storage, please follow “Menu key–Settings–SD card and deviceinternal storage", and check it under the directory of storage devices.8.8 Language and keyboard
25Set language and region (language and region), word input and automatic correction items.Select language regionTo select language and region, please press “Menu key –Settings–Language & keyboard –Select language region”.Android keyboardTo set Android keyboard, please press “Menu key –Settings–Language & keyboard –Android keyboard”.User dictionaryTo add into or delete words from the user dictionary, please press “Menu key–Settings–Language & keyboard –User dictionary”.8.9 Date and timeTo set date, time, time zone, time system and format, please press “Menu key –Settings–Date &time settings”.
268.10 About deviceCheck legal information, device statusand software versionStatusTo check the battery status, battery level, start-up time and WIFI address, please press “Menukey –Settings–About device –Status”.Legal informationTo check related legal information, please press “Menu key –Settings–About device –Legalinformation”.
27Model numberTo check device model number, please press “Menu key –Settings–About device –Modelnumber”.Firmware versionTo check firmware version, please press “Menu key –Settings–About device –Firmwareversion”.Version numberTo check version number, please press “Menu key –Settings–About device –Ve r s i onnumber”.9. Use of HDMIVia HDMI, the video played on the pad will be switched to a HDMI display device(e.g. TV with a HDMI port) for playing. The max output resolution supported by a tabletPC is 720P. The use method is shown as below:1. Turn on the pad.2. Connect the computer to a HDMI display device with a HDMI cable. Turn on thedisplay device and the HDMI connecting information will pop up on the status bar.3. Play videos on the computer.4. The videos will automatically be switched to the HDMI display device and continueto be played. Please wait. It will take about 5 seconds.5. The videos can be switched back to the pad by the following 3 ways:1) After the video was played, it will automatically switched to display on thepad;2) You may also press ESC key during playing to switch the video to the pad; or3) You may directly plug out of the HDMI cable during playing to switch thevideo to the pad.10. Troubleshooting10.1 Close application proceduresAny procedures that were opened will occupy the internal storage space in the device. Too manysuch procedures may affect the running speed of this device. Therefore, the procedures not usedshall be closed promptly to reduce their occupation of internal storage space so that the devicemay run at normal speed.To close procedures, please click icon on the shortcut bar to enter setting interface.Select “Application procedure –Running services”, as shown below:
28Click the application procedure to be closed, and a window of “Stop service?”will pop up, asshown below:Click “Stop”, the selected application procedure will be closed and disappear from thecurrent window.10.2 Forced shutdownPress and hold the power switch of this device for about 7 seconds to shut it down.10.3 Reset default settingTo reset the device factory setting and delete all information, please press “Menu key –System settings –Privacy –Factory data reset”.
29LOCAL-----Select to reset LOCAL, and the files on the local disks will be all deleted; notselect LOCAL, and the files on the local disks will not be deleted.Warning: To reset the device will delete Google account, the data and setting of the systemand application procedures, and the application procedures downloaded. Please use this functionwith prudence.11. ShortcutsNo. Shortcut Function1 F1 Setting2F2 Browser3 F3 Sending E-mail4 F4 Calendar5 F6 APK manager6 F7 Sound recorder7F8 Video8 F9 Music player9 F10 Gallery10 F11 WI-FI settings11 F12 Cabled network settings12 Fn+F8 Volume -13 Fn+F9 Volume +14 Fn+UnmLk Open numeric keyboard15 Fn+ScrLk Open direction key
30FCC Warning:This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and(2) this device must acceptany interference received, including interference that may cause undesiredoperation.NOTE: changes or modifications not expressly approved by the party responsible forcompliance could void the user's authority to operate the equipment.This equipment has been tested and found to comply with the limits for aClass B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radiofrequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user isencouraged to try to correct the interference by one or more of the followingmeasures:-- Reorient or relocate the receiving antenna.-- Increase the separation between the equipment and receiver.-- Connect the equipment into an outlet on a circuit differentfrom that to which the receiver is connected.-- Consult the dealer or an experienced radio/TV technician for help.FCC RF warning statement: The device has been evaluated to meet general RF exposurerequirement. The device can be used in portable exposure condition withoutrestriction.:

Navigation menu