SIIG HDMIGATEWAY Full HD Multi-Channel Expandable Wireless HDMI Gateway Extender User Manual 04 1097A pmd

SIIG Inc Full HD Multi-Channel Expandable Wireless HDMI Gateway Extender 04 1097A pmd

User Manual

1Full HD Multi-Channel ExpandableWireless HDMI Gateway Extender                                                  Installation GuideP/N: CE-H22T11-S1/CE-H22U11-S104-1097A
2IntroductionThe  Full HD Multi-Channel Expandable Wireless HDMIGateway Extender connects up to 3 HDMI sources andtransmits HDMI A/V signals wirelessly up to 165ft with1080p resolution.Features and Benefits• 10 selectable wireless channels available to preventsignal interference and to provide optimal receptionquality• Integrated HDMI output on the transmitter allowsfor local monitoring of the extended display• Built-it switch button and the included palm sizeremote control allows you to select the HDMI sourceeasily• Built-in LED indicators provide instant recognitionfor the connecting status• Included IR extension modules allow remotecontrolling of the HDMI source device from thedisplay unit• Aluminum construction provides overall durabilityand reliability• Wall mountable, extraordinary cube-style designcreates a sleek and stylish presence to furtheraccommodate with A/V equipment
3Package Contents•Full HD Multi-Channel Expandable Wireless HDMIGateway Extender• IR blaster extension cable• IR receiver extension cable• Power adapters (x2)• Remote control (with one battery)• Installation GuideSpecificationsNote: The transmission distance will vary depending on building layout, electronicinterference, other environmental conditions, and may be much less than themaximum.Wireless Technology 5 GHzSignal Type HDMIHDMI Version HDMI 1.3 compatibleHDCP Version HDCP 1.2 compatibleTransmission Distance Up to 50m (165ft)Supported Resolutions 1080p/1080i/720p/576p/576i/480p/480iHDMI Cable Distance Up to 5m (Input & Output)Audio Format R/L stereo audio (2-ch)PowerInput:AC 100-240V, 50/60HzOutput:DC 5V/2AColor Black and deep greyDimensions (TX & RX) 4.25" (W) x 2.36" (H) x 3.94" (D)Weight 0.57lbs (TX) / 0.48lbs(RX)Operating Temperature 32 to 122 degrees FStorage Temperature 14 to 140 degrees FOperating Humidity 0% ~ 90% RH (non-condensing)
4Product LayoutFigure 1: Transmitter (TX) - front sideSwitch button(Source)IR windowInput channel indicator•Switch button (Source): Press to switch betweenHDMI sources (HDMI sources 1, 2 or 3)•Input channel indicator: Indicates the input channelselected. There are 10 channels (0-9)•Switch button (Channel): Press to select the channel•Input indicator: On when the HDMI signal is linkedproperly•Connection indicator:         - On: The Transmitter is powered on        - Blinking: The wireless connection is established•IR window: Receives infrared signals from theincluded remote controlSwitch button (Channel)Input indicatorConnection indicator
5IR OutAntenna portHDMI outHDMI In   Power jackFigure 2: Transmitter (TX) - rear side•Antenna port: Attach the included Antenna here•HDMI Output (optional): Connects to an HDMIdisplay for local monitoring of the extended HDMIdisplay•IR out: Plug the IR Blaster extension cable here•Reset button: Press when the unit doesn't workproperly•Power jack: Connects to the included power adapter•HDMI In: Connect to your HDMI sources withHDMI cables (cables not included)Reset button
6Figure 3: Receiver (RX) - front side•Switch button (Source): Press to switch betweenHDMI sources (HDMI sources 1, 2 or 3)•Input channel indicator: Indicates the input channelselected. There are 10 channels (0-9)•Switch button (Channel): Press to select the channel•Connection indicator:         - On: The receiver is powered on         - Blinking: The wireless connection is established•Data transmission indicator: On when the HDMIsignal is linked properly•IR window: Receives infrared signals from theremote controlData transmissionindicatorConnection indicatorIR windowInput channel indicatorSwitch button(Source)Switch button (Channel)
7HDMI Out IR inAntenna port    Power jackFigure 4: Receiver (RX) - rear side•Antenna port: Attach the included Antenna here•Power jack: Connects to the included power adapter•HDMI Out: Connects to your HDMI display with aHDMI cable (cable not included)•IR in: Plug the IR Receiver extension cable here•Reset button: Press when the unit doesn't workproperlyReset button
8IR Remote ControlFigure 5: IR Remote Control•Previous (CH-): Select the previous input source•Next (CH+): Select the next input source•Input Select Button (1-3): Select input source 1, 2, 3Previous NextInput Select Button
9IR Extension cables (20-60Hz Frequency Range)The IR Extension feature allows you to control yourHDMI source device from a remote location.Figure 6: IR blasterextension cable (IR OUT)Figure 7: IR receiverextension cable (IR IN)•IR blaster extension cable (IR OUT): Plugs into theTransmitter's IR Out socket. It emits the IR signalsreceived from the IR receiver extension cable of theReceiver unit and directs it to the HDMI source's IRreceiver window•IR receiver extension cable (IR IN): Plugs into theReceiver's IR In socket.  It receives IR signals fromthe HDMI source's remote control and directs it tothe IR blaster extension cable of the TransmitterunitNote: Incorrect placement of the IR Blaster and IRReceiver extension cables may result in failure ofthese cables.  Please check carefully beforeplugging in the IR cables to ensure connecting tothe proper IR sockets.
10Hardware Installation1. Power off all devices including your HDMI sourceand display.2. Attach the included antennas to the TX and RX.3. Connect your HDMI sources to the Transmitter'sHDMI IN connectors.4. Optional: Connect the IR Blaster extension cable tothe Transmitter's IR Out.  Face the eye towards yourHDMI device's IR window. This connection is neededonly if you need to control your HDMI source fromthe remote location.5. Connect your HDMI display to the Receiver's HDMIOUT connector with an HDMI cable (not included).6. Optional: Connect your HDMI display to theTransmitter's HDMI OUT. It's only needed whenlocal monitoring of the extended HDMI display isrequired.7. Optional: Connect the IR Receiver extension cableto the Receiver's IR In. This connection is neededonly if you need to control your HDMI source fromthe remote location.8. Plug the included power adapters into theTransmitter's and Receiver's Power Jacks, then plugboth power adapters into reliable power outlets.9. Power on your HDMI devices and HDMI display(s).10. Use the included remote control or built-in switchbutton to select the same channel for the TX and RX(for channel pairing).11. The device is ready for use.
11ApplicationThe  Full HD Multi-Channel Expandable Wireless HDMIGateway Extender enables you to connect up to 3 HDMIsources and easily switch between multiple devices. Itextends HDMI signals wirelessly up to 165ft.Figure 8Note: The transmission distance will vary depending on building layout, electronicinterference, other environmental conditions, and may be much less than themaximum.
12Multicast ability: Broadcasts and independent streamsvideo content to two remotely located displayssimultaneously*.Figure 9*  Remark:  Extra receiver unit (CE-H22U11-S1) sold separately
13Notice• Wireless signals transmitted through walls, glass,brick or other solid objects will cause signal loss anddecrease the transmission distance• It's recommended that the distance between tworeceivers not less than 3 meters• Keep the unit in a well ventilated environment toprevent it from overheating•DO NOT expose the unit to rain, moisture, or liquids•DO NOT place anything on the unit•DO NOT open the housing, doing so will void thewarranty and may cause personal injury due toelectronic hazard•DO NOT plug-in or take-out the IR extension cableswhen the unit is powered onFAQ & SolutionsQ: The transmitter can't be connected with the receiver:A: 1) Check whether the power adapters of Transmitter(TX) and Receiver (RX) are connected.2) Make sure that the channel of the transmitter andreceiver are the same.Q: The unit isn't working properly:A: 1) Check the HDMI cable lengths are within 5m.2) Check the transmission distance is within 50m.3) Press Reset button on the Transmitter/Receiver.Unplug the cables and plug in again.4) Remove other wireless signals and move anyobstacles that are blocking the signal.5) Decrease the distance between the transmitter unitand the receiver unit.
14Q: There is no output on the display:A: 1) Make sure the HDMI devices are well connectedto the Transmitter (TX).2) Use different HDMI cables.3) If still not working, connect the HDMI device tothe TV directly to see if there's a signal.
15Technical Support and WarrantyQUESTIONS?  SIIG’s Online Support has answers!  Simply visit our web siteat www.siig.com and click Support. Our online support database is updateddaily with new drivers and solutions.  Answers to your questions could be justa few clicks away.  You can also submit questions online and a technical supportanalyst will promptly respond.SIIG offers a 2-year manufacturer warranty with this product.  This warrantycovers the original purchaser and guarantees the product to be free of any defectsin materials or workmanship for two (2) years from the date of purchase of theproduct.  This warranty is not transferable and is available only to the originalpurchaser of the product.SIIG will, at our discretion, repair or replace (with an identical product or producthaving similar features and functionality) the product if defective in materials orworkmanship.  This warranty gives you specific legal rights, and you may alsohave other rights which vary from state to state.  Please see our web site for morewarranty details.If you encounter any problems with this product, please follow the proceduresbelow.A)  If it is within the store's return policy period, please return the product to thestore where you purchased it.B)  If your purchase has passed the store's return policy period, please follow thesesteps to have the product repaired or replaced.Step 1:  Submit your RMA request. Go to www.siig.com, click Support, thenRequest A Product Replacement to submit a request to SIIG RMA or faxa request to 510-657-5962.  Your RMA request will be processed, if the productis determined to be defective, an RMA number will be issued.Step 2:  After obtaining an RMA number, ship the product.•Properly pack the product for shipping.  All software, cable(s) and anyother accessories that came with the original package must be included•Include a copy of your original sales receipt inside the package with dateof purchase and place of purchase circled and clearly visible•Clearly write your RMA number on the top of the returned package.  SIIGwill refuse to accept any shipping package, and will not be responsible fora product returned without an RMA number posted on the outside of theshipping carton•You are responsible for the cost of shipping to SIIG.  Ship the product tothe following address:SIIG, Inc.6078 Stewart AvenueFremont, CA 94538-3152, USARMA #:•SIIG will ship the repaired or replaced product via Ground in the U.S. andInternational Economy outside of the U.S. at no cost to the customer
About SIIG, Inc.Founded in 1985, SIIG, Inc. is a leading manufacturer of IT connectivitysolutions (including Serial ATA and Ultra ATA Controllers, FireWire, USB,and legacy I/O adapters) that bridge the connection between Desktop/Notebook systems and external peripherals.  SIIG continues to grow byadding A/V and Digital Signage connectivity solutions to our extensiveportfolio.  All centered around the distribution and switching of A/V signalsover CAT5/6, these products include matrix switches, distribution amplifiers,extenders, converters, splitters, cabling, and more.SIIG is the premier one-stop source of upgrades and is committed toproviding high quality products while keeping economical and competitiveprices.  High-quality control standards are evident by one of the lowestdefective return rates in the industry.  Our products offer comprehensiveuser manuals, user-friendly features, and are backed by an extensivemanufacturer warranty.SIIG products can be found in many computer retail stores, mail ordercatalogs, and e-commerce sites in the Americas, as well as through majordistributors, system integrators, VARs and e-commerce sites.PRODUCT NAMEFull HD Multi-Channel Expandable Wireless HDMI Gateway ExtenderFCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASSB OPERATING ENVIRONMENT: FOR HOME OR OFFICE USEFCC COMPLIANCE STATEMENT:This device complies with part 15 of the FCC Rules.  Operation issubject to the following two conditions:  (1) This device may not causeharmful interference, and (2) this device must accept any interferencereceived, including interference that may cause undesired operation.THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCESIIG, Inc.6078 Stewart AvenueFremont, CA 94538-3152, USAPhone: 510-657-8688Full HD Multi-Channel Expandable Wireless HDMI Gateway Extender is a trademarkof SIIG, Inc.  SIIG and the SIIG logo are registered trademarks of SIIG, Inc.  Microsoftand Windows are registered trademarks of Microsoft Corporation.  All other namesused in this publication are for identification only and may be trademarks of theirrespective owners.November, 2017                    Copyright © 2017 by SIIG, Inc. All rights reserved.
FCC Warning: This  equipment  has  been  tested  and  found  to  comply  with  the  limits  for  a  Class  B digital  device,  pursuant  to  part  15  of  the  FCC  Rules.  These  limits  are  designed  to provide reasonable protection against harmful interference in a residential installation. This  equipment  generates,  uses  and  can  radiate  radio  frequency  energy  and,  if  not installed and used in accordance with the instructions, may cause harmful interference to  radio  communications.  However,  there  is  no  guarantee  that  interference  will  not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: •  Reorient or relocate the receiving antenna. •  Increase the separation between the equipment and receiver. •  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. •  Consult the dealer or an experienced radio/TV technician for help.  Caution:  Any  changes  or  modifications  to  this  device  not  explicitly  approved  by manufacturer could void your authority to operate this equipment.  This  equipment  complies  with  FCC  RF  radiation  exposure  limits  set  forth  for  an uncontrolled  environment.  This  device  and  its  antenna  must  not  be  located  or operating in conjunction with any other antenna or transmitter.  “To comply with FCC RF exposure compliance requirements, this grant is applicable to only mobile configurations. The antennas used for this transmitter must be installed to provide  a separation  distance of  at  least 20  cm  from all  persons and  must  not  be co-located or operating in conjunction with any other antenna or transmitter.” Note: This device should be used for indoors only.

Navigation menu