SIRONEX U S A SIRONEX-SRX1A SIRONEX SRX SMD LED XTUBE T5, T8, T10 and T12 User Manual
SIRONEX? U.S.A SIRONEX SRX SMD LED XTUBE T5, T8, T10 and T12
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1313673 |
| Application ID | JUN7DaY/IKSKlit3Q3zqvg== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 84.17kB (1052133 bits) |
| Date Submitted | 2010-07-19 00:00:00 |
| Date Available | 2010-07-19 00:00:00 |
| Creation Date | 2010-07-07 15:01:13 |
| Producing Software | Adobe Acrobat 7.0 Image Conversion Plug-in |
| Document Lastmod | 2010-07-09 13:50:49 |
| Document Title | User Manual |
| Document Creator | Adobe Acrobat 7.0 |
REV: - qt SIRONEH” z-zs-zmo The World Class LED hghting Revolution Us A DANGER — TURN OFF THE MAIN POWER AT THE CIRCUIT BREAKER BEFORE INSTALLING SIRONEX SRX SMD LED XTUBE T5, T8, T10 and T12 Installation Guide Models: SRX1150-6W, SRX1160-12W, SRX1170—16W, SRX1180-32W, SRX1190—22.4W, SRX1200-44.8W Product Information SIRONEX SRX SMD LED XTUBE are a breakthrough lighting solution for residential and commercial lighting fixtures. They are available in a range of models to suit every need and operating environment. The SIRONEX SRX SMD LED XTUBE Installation Guide explains in detail how to safely install, operate and maintain a SIRONEX SRX SMD LED XTUBE . Operating Conditions The SIRONEX SRX SMD LED XTUBE is extremely robust, using the highest quality components, that made in (US, Japan, Korea, Malaysia, China and Taiwan). Before You Begin To avoid damage, always handle the SRX SMD LED XTUBE carefully. Unpacking: Handle with Care Before installing the SRX SMD LED XTUBE, check that you have received the items and that no parts have been damaged. Do not remove the data label, any permanent instructions, or any labels from the SRX SMD LED XTUBE. Read these installation instructions carefully and follow them exactly. After installing the SRX SMD LED XTUBE , keep this guide in a safe place for future reference. Install Always follow the directions in this guide exactly. If the SIRONEX SRX SMD LED XTUBE is installed incorrectly, it may not operate reliably and failure to install the SIRONEX SRX SMD LED XTUBE properly could void the product‘s warranty. Warning (Qualified Installation) Do not try to install the SIRONEX SRX SMD LED XTUBE replacement should be performed only by qualified electrician. In accordance with all National Electrical Code (NEC). Safety Standards for the intended working environment may cause serious personal injury, death and/or property damage. During installation the Mains Power to fixture must be disconnected at all times. Fixture must be grounded. Precautions To ensure the safe operation of the lamp and for your own safety, follow the following precautions carefully. Before connecting the SIRONEX SRX SMD LED XTUBE , check that the AC source voltage has been switched off. Wiring Diagram Following diagram shows all wiring connection for the SIRONEX SRX SMD LED XTUBE : Black (Hot) 90-277VAC 50mm White (Gold) Switch Existing T8 Fluorescent Fig: A 1. Remove lamps and fixture metal cover 2 leave the ballast in place 3 Cut or disconnect leads of hot, cold and ballast wire 4. After disconnecting Wire. follow Fig. B Wiring Diagram Black (Hot) 90-277VAC 5050“ White (Cold) Switch SRX SMD LED T8 Fig: B 1. Refer to the wiring diagram 2. Connect hot and cold vwe 3 Inspect all wiring connections 4. Switch on the power Wiring Diagram Testing After installing the SIRONEX SRX SMD LED XTUBE, Turn on the SIRONEX SRX SMD LED XTUBE‘s operating temperature for at least 24 hours. FCC warning statement This device complies with Part 18 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including in- terference that may cause undesired operation. Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to op- erate this equipment. SIRONEX Installation Guide No part of this document may be reproduced or distributed in any form or by any means. or stored in a database retrieval system without the prior express permission of the copyright holder. Contact SIRONEX customer support for more information SIRONEX San Gabriel, CA 91776 U S A Http //www sironex com Email support@sironex com Copyright © 2010 All rights reserved
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : Yes XMP Toolkit : Adobe XMP Core 4.0-c321 44.398116, Tue Aug 04 2009 14:24:39 Modify Date : 2010:07:09 13:50:49-07:00 Create Date : 2010:07:07 15:01:13+08:00 Metadata Date : 2010:07:09 13:50:49-07:00 Creator Tool : Adobe Acrobat 7.0 Format : application/pdf Document ID : uuid:c430f3cb-4f9a-44ff-b69d-1a5e68e2d66d Instance ID : uuid:8726171a-1989-44f0-8f55-f7bd1a6cbd66 Producer : Adobe Acrobat 7.0 Image Conversion Plug-in Page Count : 2 Creator : Adobe Acrobat 7.0EXIF Metadata provided by EXIF.tools