SKSpruce Technologies WIM1200-20-A WiFi Module User Manual
Skspruce Technologies Inc. WiFi Module
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3575529 |
| Application ID | XFcyA41es5K7FwEgg0Varw== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 65.65kB (820621 bits) |
| Date Submitted | 2017-09-22 00:00:00 |
| Date Available | 2017-09-25 00:00:00 |
| Creation Date | 2016-10-20 17:56:03 |
| Producing Software | Microsoft® Word 2013 |
| Document Lastmod | 2017-09-21 10:14:25 |
| Document Title | User Manual |
| Document Creator | Microsoft® Word 2013 |
| Document Author: | sk-jihongfei |
http://www.skspruce.com/ San Jose 1885 Lundy Ave., Suite 270, San Jose, CA 95131, USA Tel: +1 (408) 449-5604 WIM1200-20 CONFIGURATION MANUAL Hong Kong 15K International Industrial Centre, 2-8 Kwei Tei Street, Shatin, Hong Kong Tel: +852 26983874 Revision: 01 Issued on 2016-04-20 Chengdu A1, Tianfu Software Park, 1129 Century City Road, High-tech Zone, Chengdu, Sichuan, P.R. China Tel: +86 28 85231119 SKSpruce Technologies No part of this documentation may be reproduced in any form or by any means or used to make any derivative work (such as translation, transformation, or adaptation) without prior, express and written permission from our company, Inc. Our company reserves the right to revise this documentation and to make changes in content from time to time without obligation on the part of our company to provide notification of such revision or changes. Our company provides this documentation without warranty of any kind, implied or expressed, including but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Our company may make improvements or changes in the product(s) and/or the program(s) described in this documentation at any time. UNITED STATES GOVERNMENT LEGENDS: If you are a United States government agency, then this documentation and the software described herein are provided to you subject to the following: United States Government Legend: All technical data and computer software is commercial in nature and developed solely at private expense. Software is delivered as Commercial Computer Software as defined in DFARS 252.227-7014 (June 1995) or as a commercial item as defined in FAR 2.101(a) and as such is provided with only such rights as are provided in our company’s standard commercial license for the Software. Technical data is provided with limited rights only as provided in DFAR 252.227-7015 (Nov 1995) or FAR 52.227-14 (June 1987), whichever is applicable. You agree not to remove or deface any portion of any legend provided on any licensed program or documentation contained in, or delivered to you in conjunction with, this User Guide. Contents Contents Preface ....................................................................................................................................................... 3 Audience ................................................................................................................................................ 3 Applicable Browers................................................................................................................................. 3 Documentation Structure ....................................................................................................................... 3 1 SSH Configuration................................................................................................................................... 4 1.1 Default Username and Password .................................................................................................... 4 1.2 Initial Password Change .................................................................................................................. 4 2 WEB Configuration .................................................................................................................................. 6 2.1 Page Login ....................................................................................................................................... 6 2.2 System Info ...................................................................................................................................... 6 2.3 Wi-Fi Settings ................................................................................................................................... 7 2.3.1 Revisible Wi-Fi Information...................................................................................................... 8 2.3.2 Default Wi-Fi Configuration ..................................................................................................... 8 2.3.3 DHCP Server Configuration .................................................................................................... 9 2.4 Admin Password Change ................................................................................................................. 9 2.5 Upgrade ............................................................................................................................................ 9 2.6 Restart ............................................................................................................................................. 11 WIM1200-20 Configuration Manual Contents Preface Audience This manual is directed for the technical services workers from SKSpruce Technologies, users and related pateners. It introduces the basic parameter configuration and management on module. Applicable Browers The web page is applicable in Firefox, Chrome and Internet Explorer. Note: for a better user experience, please use the Internet Explorer 8 or above. Documentation Structure Chapter Title Description Chapter 1 SSH Configuration Log in to the module for detailed and basic configuration update through SSH. Chapter 2 WEB Configuration Simple status monitoring and security parameter configuration through the WEB interface on module. WIM1200-20 Configuration Manual 1 SSH Configuration 1.1 Default Username and Password After launching the WIM1200-20 module, three SSID (AU-WIFI, AU-WIFI-1 and AUWIFI-2) would open and their passwords are the last 8 characters of the serial number on module by default, which can be acquired in the label on it. Then the SSID is searchable and connected by Wi-Fi terminal device. The default SSH username is “admin” and the password is “5upS%k!”. Please see the figure 1-1 below. Figure 1-1 SecureCRT Login 1.2 Initial Password Change The passward can be changed through passwd command “passwd admin”, then the user can input the new password according to the note. For further parameters change, please refer to the basic module configuration command manual. WIM1200-20 Configuration Manual Note: the WEB configuration is recommended for terminal users instead of SSH configuration, which may induce configuration fault. WIM1200-20 Configuration Manual 2 WEB Configuration This chapter introduces the basic WEB configuration for WIM1200-20 including login page, System Info, Wi-Fi Settings, Admin Password, Upgrade and Restart. 2.1 Page Login After launching WIM1200-20 module, three SSID (AU-WIFI, AU-WIFI-1 and AU-WIFI2) would open and their password is the last 8 characters of the serial number on module by default, which can be acquired in the label on it. Then SSID is searchable and connected by Wi-Fi terminal device. The module login page can be visited through http://192.168.1.1:8080/. See the figure below. Figure 2-1 Input the password “admin” and click “Enter” for the configuration page. 2.2 System Info System Info is used for module information and network connection monitoring. See the figure below. WIM1200-20 Configuration Manual Figure 2-2 This page displays the firmware version, serial number, MAC address, intranet IP, router, DNS and Internet IP, but the data of intranet IP, router and DNS are only visible under intranet connection. Firmware version: AmOS-4.5.4.050P00R01 Serial Number: 448E1C72A2B0 MAC Address: 44:8e:1c:72:a2:b0 Extranet IP: 10.10.23.56 Default route: 10.10.23.1 DNS: 192.168.10.3 Intranet IP:192.168.1.1 2.3 Wi-Fi Settings This page is used for configuring basic Wi-Fi information and DHCP Server. See the figure 2-3 and figure 2-4 below. WIM1200-20 Configuration Manual Figure 2-3 Figure 2-4 2.3.1 Revisible Wi-Fi Information The revisible Wi-Fi information includes the SSID name, password and switch for each SSID (if selected it is ON and otherwise OFF), any changes of it would take effect on the 2.4G / 5G interfaces and their SSIDs at the same time. Note: the definition of the first SSID of the checkbox is different from others. It is used for hiding the SSID or not (once putting the cursor on the checkbox, there would be “Broadcast/Hide” like figure 2-3. The definition of “Broadcast” is searchable for other users and “Hide” means not, once hiding the SSID, it can only be connected by manual input). While other checkbox means to open or close the SSID (once putting the cursor on the checkbox, there would be “On/Off” as figure 2-4). Input the new information, click “save” to submit the Wi-Fi configuration parameter. The SSID name should no more than 32 characters, password should between 8-64 characters. 2.3.2 Default Wi-Fi Configuration The default SSID amount: 3 SSIDs on 2.4G and 3 on 5G. The first SSID is ON, other two are OFF in factory settings and they are available to open or edit by users if necessary. WIM1200-20 Configuration Manual Maximum connected user amount: 16 under each radio permission and 32 for the overall unit. Deafult SSID name: they are AU-WIFI, AU-WIFI-1 and AU-WIFI-2 for both 2.4G and 5G. Default Wi-Fi password: the last 8 characters for all the SSID. Default Cipher mode: wpa2-psk+ccmp Default bandwidth rate limit: the utmost 1Mbps of uploading and downloading speed for each SSID and user. Default Wi-Fi mode: 802.11b\g\n mixed mode for 2.4G and 802.11a\n\ac mixed mode for 5G. Default Tx power: maximum Default channel: automatic Default country code: US 2.3.3 DHCP Server Configuration The configurable DHCP address pool through DHCP Server ranges from 2-254. 2.4 Admin Password Change For admin password changes, please see the figure below. Figure 2-5 According to the note, input old password, new password, confirm password and click “Save”. 2.5 Upgrade The module supports for local upgrade and online upgrade, and when the module cannot detect the new version for remote server, there would be only local upgrade on the page. See the figure 2-6 below. WIM1200-20 Configuration Manual When the system detects the upgradable firmware like figure 2-7 below, the user can choose to upgrade in Local or Online column. The page displays Online upgrade first by default. For Local upgrade page, please see the figure 2-8 below. Figure 2-6 This page is used for the local upgrade for module system. First, the user needs to download the firmware to the local path from official website, then browse the object on this page and click “Upgrade Now”. It requires 3 to 4 minutes before completed. Figure 2-7 This page displays the current firmware version and detected version from remote server. Clicking “Upgrade Now” means the automatic downloading and upgrading of module. WIM1200-20 Configuration Manual 10 Figure 2-8 The operation on this page is used for local upgrade. Note: please don not switch the power off for the good performance of firmware. 2.6 Restart This page is used for local restart in module. See the figure below. Clicking Restart means restart the module. WIM1200-20 Configuration Manual 11 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. This device is restricted to indoor use. IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. The module is limited to OEM installation ONLY. This module is intended for OEM integrators under the following conditions: 1. This module is restricted to installation in products for use only in mobile and fixed applications. 2. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. 3. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter. 4. OEM integrator has be limited the operation channels in channel 1-11 for 2.4GHz band. The OEM integrator is still responsible for 1. ensuring that the end-user has no manual instructions to remove or install module 2. the FCC compliance requirement of the end product, which integrates this module. 3. Appropriate measurements (e.g. 15 B compliance) and if applicable additional equipment authorizations (e.g. Verification, Doc) of the host device to be addressed by the integrator/manufacturer. 4. The separate approval is required for all other operating configurations, including portable configurations with respect to Part 2.1093 and different antenna configurations The user manual of the end product should include 1. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. 2. the restriction of operating this device in indoor could void the user’s authority to operate the equipment. 3. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. 4. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. 5. The FCC part 15.19 statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Label of the end product: The final end product must be labeled in a visible area with the following " Contains TX FCC ID: 2ACKD-WIM1200-20-A ". The end product shall bear the following 15.19 statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. If the labeling area is considered too small and therefore it is impractical (smaller than the palm of the hand) to display the compliance statement, then the statement may be placed in the user manual or product packaging. Guidance to the Host Manufacturer: 1. We hereby acknowledge our responsibility to provide guidance to the host manufacturer in the event that they require assistance for ensuring compliance with the Part 15 Subpart B requirements. The host manufacturer is responsible for additional testing to verify compliance as a composite system. 2. When testing the host device for compliance with the Part 15 Subpart B requirements, the host manufacturer is required to show compliance with the Part 15 Subpart B while the transmitter module(s) are installed and operating. The modules should be transmitting and the evaluation should confirm that the module’s intentional emissions are compliant (i.e. fundamental and out of band emissions) with the Radio essential requirements. The host manufacturer must verify that there are no additional unintentional emissions other than what is permitted in the Part 15 Subpart B or emissions are complaint with the Radio aspects.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : No Author : sk-jihongfei Create Date : 2016:10:20 17:56:03+08:00 Modify Date : 2017:09:21 10:14:25+08:00 Subject : 解决方案 Has XFA : No Language : zh-CN Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30 Format : application/pdf Creator : sk-jihongfei Description : 解决方案 Creator Tool : Microsoft® Word 2013 Metadata Date : 2017:09:21 10:14:25+08:00 Producer : Microsoft® Word 2013 Document ID : uuid:72ca20fd-7a62-42b1-872d-30df2f5dd00d Instance ID : uuid:0a4689e9-c452-4b92-a374-c84b9653f34d Page Count : 14EXIF Metadata provided by EXIF.tools