SKY DRAGON Audio video Technology CK128 Multimedia speaker User Manual CK128 20160928

Download:
Mirror Download [FCC.gov]
Document ID	3199836
Application ID	GUQYcf0CYys9d9ExCRyOGg==
Document Description	user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	17.02kB (212797 bits)
Date Submitted	2016-11-18 00:00:00
Date Available	2016-11-18 00:00:00
Creation Date	2017-12-17 23:32:07
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-12-17 23:32:07
Document Title	Microsoft Word - CK128说明书20160928
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Administrator

CK128 User Manual
Picture is for reference only
Dear Customer
Thank you for your excellent choice of CK128 music lamp. Please read instructions
carefully before operating this Bluetooth speaker in order to bring it into full play.
Unpack the box, please make sure you get following product and accessories: 1*
Music Lamp, 1* Micro USB Charging Cable, 1* User Manual. Please keep user
manual properly for further reference.
Product Introduction
Adopting digital signal processing technique, CK128 is an advanced and portable
wireless music lamp for Bluetooth play, TF/SD card, external audio input and
amplification, compatible with most Bluetooth enabled devices and applicable to
indoor entertainment and outdoor activities.
Attentions
For better performance maintaining, please keep this speaker away from following
conditions:
● Damp or underwater conditions
● High‐temperature conditions
● Direct‐sun exposure conditions
● Easy fall off conditions
Warnings
Please keep it away from water and damp.
Please make sure it is charged with specified voltage to avoid fire or
electric shock hazards.
Power Supply
Powered by the built‐in 3.7V lithium battery. Please fully charge the speaker
3~5hrs before first time use and make sure to charge this speaker once a month
due to its 3.7V self power consuming lithium battery. It takes about 3hrs to be
fully charged with a standard micro USB cable (DV 5V) if this speaker run out of
juice completely.
This speaker could be charged any time in any mode, however, playing music
while charging would greatly lower charging efficiency which is not recommended
since there would be a relatively huge current consumption. Please make sure this
speaker is fully charged and do please remember to unplug micro USB charging
cable before music playing.
Charging Alert
Speaker beeps the first time indicating less than 10% battery jucie during music
mode; Speaker beeps several times during music mode and power off
automatically, do please to re‐charge it.
Diagram
1. Metal Ring: Touch to adjust lights or answer the phone call;
press 3s to turn off lights
‐
2. : Previous track/Volume‐
3.
: Long press to power on/off; short press to pause/play/answer/end a call
(Indicator flashes in blue when music is on; in steady red when charging)
4.
+: Next track/Volume+
5. Microphone
6. TF/SD Card Slot
7. USB Port
8. Single Cycle
9. Mode Switch
10. Timer
11. Eyelet for string
12. Reset
Bluetooth Mode
Turn on the speaker to enter into Bluetooth mode automatically (if not, switch
mode by pressing “mode” button).
● Indicator flashes fast in blue and voice prompts, waiting for device connecting
● Turn on Bluetooth on your device
● Pair with “CK128” (If it’s already paired with your device, it will reconnect
automatically)
● Voice prompts “Bluetooth Connected” and indictor goes on in blue steadily
Hands‐free Mode
When this speaker is connected your phone and, it rings for a coming call.
● Touch metal ring or short press
to answer incoming phone calls in
Bluetooth mode
● Touch metal ring or short press
to hang up and back to music playing
● Reminder: To reject a call couldn’t be operated by the speaker
TF Card Mode
Power on and insert TF∕SD card, the speaker would read and play music inside
automatically (supports MP3, WMA and WVA format).
TF Card Music Download
Insert TF card and connect the speaker with your PC by USB cable to download
music directly from the internet.
FM Mode
● Switch to FM mode by pressing “Mode” button
● Voice prompts “TF card mode”
● Under TF card mode, press
to search for radio stations and press again to
end it
● Indicator flashes fast during station searching
● Selected radio station would be saved automatically
Lamp Instruction
Speaker power on, finger touch or palm pat the metal ring to turn on the light.
Touch repeatedly to sequentially shift to dim white light, low white light, medium
white light, high white light, red light, blue light, green light, alternating light
(pause a color by pressing it); press again to run the circle again. Press the metal
ring for 3s to turn off light.
Timer Instruction
Press the “timer” button to shift between 10mins, 20mins, 30mins, 60mins,
90mins and 120mins timing. Both lamp and speaker turn off automatically after
set time. Press the “timer” button for 3s to cancel timing.
Technical Parameters
Battery Capacity: 3.7V, 2000mAh
Charging Time: 3‐3.5H
Driver Diameter: φ52*32mm
Speaker Power: 4Ω, 4W
Frequency Response: 70HZ‐20KHZ
Bluetooth Version: V2.1+EDR
Distortion: 0.5%
SNR: 65db
Main Material: ABS/PP, stainless steel
Product Dimensions: 86*86*121mm
Weight: 350g
Light Power: 1.2W
Troubleshooting
Situation
Solution
Bluetooth failed to connect
Make sure it is disconnected with previous
device since it would auto‐connect to the last
connected device. Please search and connect
speaker with new device.
Low or no volume
A: This speaker is designed with low output
volume．
B: Make sure you’ve turned up volume of both
devices and this speaker.
Poor
Bluetooth
while playing music
connection
Make sure there is no barrier between the
speaker and your Bluetooth device.
Make sure the speaker isn’t too far away from
your Bluetooth device. Working scope is less
than 10 meters.
Indicator light is off during
Low battery and please to charge
music playing
Failed to connect with two
It
devices
simultaneously.
could
not
pair
with
two
devices
Please disconnect with the first device and turn
off the Bluetooth function of the first device. To
pair and connect with the second device, please
turn on the Bluetooth of the second device to
pair with this speaker.
No audio output from TF/SD
card
A: Check the volume and the play/pause button.
B: Make sure TF/SD card insert into card slot
completely.
C: Try new music. The original music might be
incompatible or damaged..
Reset
If the above measures could not solve the
problem, please reset this speaker.
Tips
● Don’t disassemble or remold it
● Please charge it within the required power range
● Please keep the volume moderate to avoid hearing damage
● Disassembling it renders the warranty invalid
Notes
If all those solutions above failed to shoot troubles, please send email directly to
ckyservice@hotmail.com and turn to our customer officer for help. We promise
every valuable customer with 3‐month no hassle after‐sale services.
Company Information
Vomaxtech Limited is an energetic startup, established by the returnee from
Chicago along with a group of like‐minded comrades. We focus on the best
customer experience and creating an exclusive product world for them. Here, we
have a powerful Statistics Analysis team dedicated to market research to ensure
every product suit customers’ usage habits and aesthetic standard best. The
distinctive R &D team makes every product more energetic to guarantee
customers a perfect experience. Besides, the strict QC system and the most
intimate service team are ready here to serve you in every detail whenever you
need.
Warning：
changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation. changes or modifications not expressly approved
by the party responsible for compliance could void the user's authority to operate
the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
‐‐ Reorient or relocate the receiving antenna.
‐‐ Increase the separation between the equipment and receiver.
‐‐ Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
‐‐ Consult the dealer or an experienced radio/TV technician for help.
NOTE: This device and its antenna(s) must not be co‐located or operation in
conjunction with any other antenna or transmitter.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 1
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:c92a34a8-a6d9-11f2-0000-02c7314339d4
Producer                        : GPL Ghostscript 9.18
Modify Date                     : 2017:07:22 09:07:50Z
Create Date                     : 2017:07:22 09:07:50Z
Creator Tool                    : UnknownApplication
Document ID                     : uuid:c92a34a8-a6d9-11f2-0000-02c7314339d4
Format                          : application/pdf
Title                           : Untitled

EXIF Metadata provided by EXIF.tools