SKY RICH STAR BT0312AA0820 LED Wall Light User Manual BT0312AA0820 IM E Posting 2018 8 17
SKY RICH STAR LIMITED LED Wall Light BT0312AA0820 IM E Posting 2018 8 17
user_manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3983352 |
| Application ID | DjfrJn/AndUR3VTq2YhjtQ== |
| Document Description | user_manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 444.42kB (5555190 bits) |
| Date Submitted | 2018-08-29 00:00:00 |
| Date Available | 2018-08-29 00:00:00 |
| Creation Date | 2018-08-17 18:12:38 |
| Producing Software | Adobe PDF library 10.01 |
| Document Lastmod | 2018-08-27 09:17:42 |
| Document Title | BT0312AA0820-IM (E) Posting 2018.8.17. |
| Document Creator | Adobe Illustrator CC (Windows) |
17” Fold INSTALLATION 17” Fold Fold FCC WARNING: INSTALLATION CAUTION: Before beginning installation turn off the circuit breaker and light switch. WARNING: Changes or modifications to this unit not expressly approved by the party responsible for WALL LANTERN MOUNTING BASE STEP 1 Tighten finial (Part F) to bottom of lantern by turning clockwise until secure. (Figure 1) compliance could void the user authority to operate the equipment. ********************************************************************************************** NOTES:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (Figure 1) (Figure 3) STEP 2 STEP 4 First installed screws (Part G) on the mounting bracket (Part A). Position the mounting bracket (Part A) to the junction box and secure using screws (Part E). Connect the AC wires to the corresponding wires (BLACK to BLACK, WHITE to WHITE and GROUND to GROUND) in the junction box using the wire nuts (Part D). (Figure 2) 11” • • • • Caulk completely around the area where the canopy meets the wall surface with silicone caulking compound to prevent water from seeping into the junction box. Turn power ON at the circuit breaker. Verify light function. (Figure 4) BLUETOOTH OPERATION NOTE: Verify light function by covering photocell with piece of electrical tape. Light should STEP 1: Download the Honeywell LED Lighting App for free from Apple or Google store depending on your device. Note: That App compatibility is only with iPhone (4S generation and iOS 7.0 or above) and Android devices (5.0 or above). come on. Remove electrical tape. The silicone is not included. RECOMMENDED: Wrap each wire nut with electrical tape (not included) after wires have been attached. RESET BUTTON INSTRUCTIONS Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. If you are unable to reset your user name and password using the app on your cell phone, follow these steps. A) During daytime cover the light sensor with a black cloth or tape which will turn on the lantern. Remove the cloth or tape and the lantern will turn off. Repeat this 5 times within 20 seconds until the light flashes red. Proceed to step C. B) During night time shine a bright light near the light sensor to turn off the lantern. Remove the bright light and lantern will turn on. Repeat this 5 times within 20 seconds until the light flashes red. Proceed to step C. C) Enter default password "1234" to control light. NOTE: To create new password, tap the lock icon on the app screen. Select desired password option and reset the password using your own number sequence. Note that any previously saved functions will need to be reset. Online password recovery is not currently supported. SILICONE CAULKING (Not Included) STEP 2: Make sure your mobile device’s Bluetooth is enabled. STEP 3: Open Honeywell LED Lighting App on your mobile device and select View Tutorial for instructions or select Control My Lights to begin using your lights. STEP 4: Select and tap a paired light from the list. Paired lights will be highlighted in white with a number in the lower right hand corner. The number indicates the available lights which can be paired. Enter the default password 1234 (when prompted). From this point, you can either tap the light icon to turn fixture on or off or press and hold the light icon to open the menu to control the light. A) Color wheel - select specific color using wheel. B) Preset and custom colors - select preset mode to display colors in various preset sequences or customize up to 3 colors. Press and hold custom button to save the customized color. C) White - Default your light to white only tone.You can select desired brightness by moving bar from lighter to darker. PHOTOCELL (Figure 4) APP TUTORIAL TROUBLE SHOOTING (Figure 2) STEP 3 PROBLEM A. Place wall lantern (Part I) over pre-installed screws on the mounting bracket (Part A) and through the mounting holes located on both sides of the wall lantern mounting base. (Figure 3) B. While holding the wall lantern (Part I) over mounting bracket (Part A) with the installed screws (Part G), make sure the the both screws (Part G) protruding through mounting holes of the wall lantern mounting base. C. Secure to the mounting bracket (Part A) using washers (Part B) and screw caps (Part C) onto the protruding screws in the previous step. Light will not come on. Lights come on during the day. EN | 2 APP HELP POSSIBLE CAUSE A. Fuse is blown or circuit breaker is turned off. B. Incorrect circuit wiring. A. Photocell covered. SOLUTION A. Replace fuse or turn circuit breaker on. B. Verify that fixture is wired properly. A. Clean photocell with damp cloth. EN | 3 Fold EN | 4 Fold EN | 5 Fold 17” Fold 17” Fold Fold SAFETY INFORMATION EN LED Outdoor Wireless Color Changing Wall Lantern Use and Care Guide WARNING: Read all safety precautions and installation instructions carefully before installing or servicing this fixture. Failure to comply with these instructions could result in a potentially fatal electric shock, fire, and/or property damage. Read and Save this Instructions Before Use • To reduce the risk of electrical shock or other personal injury, ensure the power is turned OFF at the fuse or breaker box before making any electrical connections. • For outdoor use only. • Must be connected to 120 volt, 60 Hz power source. • Fixture should be mounted to a grounded junction box marked for use in wet locations. • Suitable for wall mount. • NOT suitable for ground locations. Minimum of 4 feet or higher. • Wall lantern should be installed by a qualified electrician or person experienced with household wiring. The electrical system, and method of electrical connection of the fixture, must be in accordance with the National Electrical Code and local building codes. Trademark Attribution Footnote SUITABLE FOR WET LOCATIONS CONSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT BRANCH CIRCUIT CONDUCTOR. MINIMUM 90° C SUPPLY CONDUCTORS THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED. Whenever the Bluetooth Trademarks are used in a particular piece , they must be attributed with an appropriate trademark footnote. The recommended attribution footnote is as follows: “The Bluetooth ® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. And any use of such marks by SKY RICH STAR LIMITED is under license. Other trademarks and trade names are those of their respective owners.” PRE-INSTALLATION Model: BT0312AA0820 11” PLANNING INSTALLATION • Turn off the electrical power at the fuse or circuit breaker box before installing or servicing any part of this fixture. • Carefully remove the fixture from the carton and check that all parts are included. Be careful not to misplace any of the screws or parts needed for installing the fixture. HARDWARE INCLUDED B: Washers (2) 10 mm x 4 mm x 2 mm A: Mounting Bracket (1) Sky Rich Star Limited UNIT E, 10/F, WORLDWIDE CENTRE, 123 TUNG CHAU STREET, TAI KOK TSUI, KL, HONG KONG Toll-free: 1-877-723-0723 C: Screw Caps (2) 8.7 mm x 7 mm x 8.5 mm D: Wire Nut (3) P3 12 mm x 21.5 mm F: Finial (1) G: Phillips Head Screws (2) M4 x 32mm E: Phillips Head Screws (2) 8-32UNC x 20 PARTS AFI H- Made in China © 2018 Sky Rich Star Limited, all rights reserved. The Honeywell Trademark is used under license from Honeywell International Inc. Honeywell International Inc. makes no representations or warranties with respect to this product. This product is manufactured for Sky Rich Star Limited. Bracket Finial Lantern Light Sensor EN | 6 EN | 1 Fold Fold Fold
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No XMP Toolkit : Adobe XMP Core 5.5-c014 79.151739, 2013/04/03-12:12:15 Format : application/pdf Title : BT0312AA0820-IM (E) Posting 2018.8.17. Metadata Date : 2018:08:27 09:17:42+08:00 Modify Date : 2018:08:27 09:17:42+08:00 Create Date : 2018:08:17 18:12:38+09:00 Creator Tool : Adobe Illustrator CC (Windows) Thumbnail Width : 256 Thumbnail Height : 60 Thumbnail Format : JPEG Thumbnail Image : (Binary data 7486 bytes, use -b option to extract) Instance ID : uuid:65632c53-9c38-4b5e-bde1-ee48ee4c8356 Document ID : xmp.did:c75a6988-d115-924a-ab20-6d60443d8684 Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : uuid:dc3c9037-e20c-412c-8b7c-31955937a379 Derived From Document ID : xmp.did:ac35d46f-75e5-4c49-9333-e26a6e31f62a Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : proof:pdf History Action : saved, saved History Instance ID : xmp.iid:b30d6691-8fd7-4dad-b7d8-9273703292a1, xmp.iid:c75a6988-d115-924a-ab20-6d60443d8684 History When : 2016:08:23 10:14:54-05:00, 2018:08:17 18:12:34+08:00 History Software Agent : Adobe Illustrator CC 2015.3 (Macintosh), Adobe Illustrator CC (Windows) History Changed : /, / Manifest Link Form : EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference Manifest Reference File Path : \\Server\Packaging 2\Anna\HONEYWELL\手机APP\19.jpg, \\Server\Packaging 2\Anna\HONEYWELL\手机APP\20.jpg, \\Server\Packaging 2\Anna\HONEYWELL\手机APP\18.jpg, \\SERVER\Packaging 2\Anna\HONEYWELL\手机APP\14.jpg, \\Server\Packaging 2\Anna\HONEYWELL\手机APP\16.jpg, \\Server\Packaging 2\Anna\HONEYWELL\手机APP\17.jpg, \\SERVER\Packaging 2\Anna\HONEYWELL\手机APP\LOGO.tif, \\Server\Packaging 2\Anna\HONEYWELL\手机APP\03.jpg, \\SERVER\Packaging 2\Anna\HONEYWELL\手机APP\02.jpg, \\Server\Packaging 2\Anna\HONEYWELL\手机APP\01.jpg, \\Server\Packaging 2\Anna\HONEYWELL\手机APP\09.jpg, \\Server\Packaging 2\Anna\HONEYWELL\手机APP\07.jpg, \\Server\Packaging 2\Anna\HONEYWELL\手机APP\10.jpg, \\SERVER\Packaging 2\Anna\HONEYWELL\手机APP\06.jpg, \\SERVER\Packaging 2\Anna\HONEYWELL\手机APP\05.jpg, \\Server\Packaging 2\Anna\HONEYWELL\手机APP\04.jpg Startup Profile : Print Has Visible Overprint : True Has Visible Transparency : True N Pages : 1 Max Page Size W : 608.659182 Max Page Size H : 311.150000 Max Page Size Unit : Millimeters Font Name : Helvetica-Condensed-Bold, Helvetica-Condensed-Light, ArialMT, Arial-BoldMT, HoneywellCond-Light, HoneywellCond-Bold, HoneywellCondTT-Book, HoneywellSans-Bold Font Family : Helvetica Condensed, Helvetica Condensed Light, Arial, Arial, Honeywell Cond, Honeywell Cond, Honeywell Cond TT, Honeywell Sans Font Face : Bold, Regular, Regular, Bold, Light, Bold, Book, Bold Font Type : TrueType, Open Type, Open Type, Open Type, Open Type, Open Type, TrueType, Open Type Font Version : Version 1.0, 001.002, Version 5.01.2x, Version 5.01.2x, Version 1.200;PS 1.0;hotconv 1.0.81;makeotf.lib2.5.63406, Version 1.200;PS 1.0;hotconv 1.0.81;makeotf.lib2.5.63406, Version 1.200; Honeywell Cond TT, Version 1.200;PS 1.0;hotconv 1.0.81;makeotf.lib2.5.63406 Font Composite : False, False, False, False, False, False, False, False Font File Name : Helvetica Condensed Bold_0.ttf, helvetica-condensed-light_0.otf, Arial_2.ttf, Arial Bold.ttf, HoneywellCond-Light.otf, HoneywellCond-Bold.otf, HoneywellCondTT-Book.ttf, HoneywellSans-Bold.otf Plate Names : Cyan, Magenta, Yellow, Black Swatch Group Name : 默认色板组 Swatch Group Type : 0 Producer : Adobe PDF library 10.01 Page Count : 2 Creator : Adobe Illustrator(R) 17.0 For : Administrator, Bounding Box : -841 -35 3091 893 Container Version : 11 Creator Version : 17EXIF Metadata provided by EXIF.tools