SKY WING Communication Electronics EM510 Bluetooth Headset User Manual
SKY WING Communication Electronics Co.,Ltd Bluetooth Headset
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1852137 |
| Application ID | 45ki+NqCacFbeX4vhq0+IQ== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 324.74kB (4059287 bits) |
| Date Submitted | 2012-12-04 00:00:00 |
| Date Available | 2012-12-04 00:00:00 |
| Creation Date | 2012-12-04 14:28:00 |
| Producing Software | Adobe Acrobat 10.1 Image Conversion Plug-in |
| Document Lastmod | 2012-12-04 14:28:19 |
| Document Title | User Manual |
| Document Creator | Adobe Acrobat 10.1 |
EM510: User Guide Owner’s Manual Charging the Bluetooth Headphones i.Connect the charging pin ofthe USB cable to the charging socket of the headphones. 2. Connect the other end ofthe USB cable to either the: - plug into a wall (A/Cl outlet. . Computer's use port. 3.The RED LED indicator light turns on. 4. The RED LED indicator light shuts offwhen the headphones are fully charged (approximately 3 hours). IErnerson'” NOTE: The Bluetooth Headphones wiIl emit an intermittent beep tone and the RED LED will flash when the battery is running low and requires recharging. indicator / light usa pert ’_ Socket GB Bluetoothfl STEREO WIRELESS HEADPHONES Ne USB Cable EM510 NOTE: Make sure you charge your headphones for 3 hours before using it for the first time. Pairing the headphones with a Bluetooth enabled device i. Make sure the Bluetooth Headphones are turned off 2. Keep your Bluetooth Headphones and mobile phone within 3 feet of each other during the pairing process. 3. Press down and HOLD the[ (I) ] button until the RED and BLUE lights flash alternately. 4.The headphones are now in Palrlng Mode and ready to “figmg connect to your mobile phone. nrtmnoflfi Bluetooth _ _ Headphones User Gu'de USBCCahbaIEmQ SML DDD Silicone cushions Power button 4—» (Press down 8. HOLD) within 3 feet / indicator light NOTE:To enterthe Pairing Mode, you must press down and Location of controls HOLD the [ (I) ] button for approximately 10 seconds. Forward + Play/stop d) 5. Set your mobile phone or other Bluetooth enabled device to sea rch for Bluetooth devices. Bluaiuodi: Enabled Backward I Paired Devices Searching for devices Volume Down I Power ONIOFF d) Volume Up + a. When the phone finds the headphones, connrm by selecting EM510 from the list. Blustoodi: Enabled Paired Devices: Select Device: EMS’I D I: 7. Enter passcode ”0000” when prompted by the phone. Eluanodi: Enabled Paired Devices: Enter numeric passkey for EM510: on depending on which model mobile phone you are trying to connect the headphones to, it may not be necessaryto enter a passcode and the following message (or similar) may appear on your phone's display. Bluetoodi: Enabled Paired Devices: “EM510" would like to pair with your phone. Would you like to allow it to pair? Select"Pair”to connect the headphones to your phone. 8. Your mobile phone will confirm that the pairing wascompleted, and prompt you to accept the connection. Please respond yes to connect the headphones to your mobile phone. Ifthe pairing was successful, the headphones’s indicator light flashesa steady blue. Elluemoth: Enabled Confirm connection to EM51 D? /: 9. When attempting to reconnect the headphones to your mobile phone, you may see the message below, and your mobile phone will prompt you to accept the connection request to the EMS‘l 0 headphones, and an option not to ask this again. Please accept the connection, and if you select "Don’t ask this again’l your phone will automatically accept future connection requestsfrom your Bluetooth Headphones. Ellumoth: Enabled Paired Devices: Accept connection request from EM510? |YES I/ E Don‘t: ask this again NOTE: The screenshots above are typical of many Bluetooth enabled phones in the market today, and are used to assist in the explanation ofthe pairing processYour mobile phones interface and interaction with the Bluetth Headphones may slightly differ from the illustrations above. Pairing With the SONY PlayStation’EB (PS3 Pa gthe Bluetooth Headphones with a Sony PlayStation 3 <5EI' ACCESSORY to BLUETOOTH on P53> 1.go to the P53 main menu, scroll to and select “Settings”. 2. Scroll to and select “Accessory Settings”. 3, Scroll to and select "Manage Bluetootll Devices". 4, The menu will ask: ”The Bluetooth device has not been registered. Do you want to register I .", then select was". (REGISTER EM51 0 to P53> Put your Bluetooth Headphones into pairing mode. (See ‘Pain'ng the Headphones with a Bluetooth enabled device’? 1 . Select "Start Scanning” from the P53 menu. 2. Once the P53 has discovered the Headphones, the screen will read “Select the Bluetooth device to register”, then select “EM510” 3. The P53 will ask fora passkey. Enter [0000] then select "0K". Now press [0] (the P53 circle button) to get back to the previous menu. 4. Scroll to and select ”Audio Device Settings" to change the "Input Device” to "EM51 0". NOTE: "Input Device" is the microphone, and determines the method of hmv how others will hearyou speak. Bydefault, the "Output Device"wi|l now switch to "EM510". "Output Device" is the audio, and determines how you will hear the P53 audio and others speaking. To test the connection, speak into the Headphones and you will see the bars above the “Microphone Level”moving, if not, repeat the pairing process. Press "OK" to confirm the new settings. Vou are now ready to use the Bluetooth Headphones with your P53 Entenainment System. lfyou would like to hearthe P53 audio through yourTV or Audio System scroll to'Output Device‘and switch to“System Dehult Device’i Forfurther assistance with Bluetooth settings on your P53 please refer to your PS3 instruction manual. Using your Bluetoofh Headphones Powering ONIOFF . To turn on, press down and HOLD the [ d) ] button until the BLUE LED indicator light turns on. . To turn orr, press down and HOLD the[ d) ] button until the RED LED indicator light blinks and shuts off. Answering/Ending 3 ca | -To answer a call, pressthell O ] button once. .To end a call, press the l O ] button once. To make a call Dial the numberand press the send button on your mobile phone. the call is automatically transferred to the headphones. Adjusting the volume Press and HOLD the[ + ]or[ — ]buttontoadjustthe volume to the desired level. NOTE: You may also adjust the volume from your mobile phone’s volume control, Rejecting an incoming call To reject an incoming call, press and HOLD the [ (I) ] button until you hearthe confirmation tone. Redialing the last number called (Dependent on your phone supporting this feature) Double press the [ (I) ]button.The last number called will be redialed. e dial (Dependent on your phone supporting this feature) Press and HOLD the[ d) ] button until you hear the confirmation tone, and then say a name from your phone’s contact list. Transferring calls To transfer calls between yourBluetooth Headphones and phone during a conversation, press and HOLD the[ d) ] button until you hearthe confirmation tone. To transfer the call back to the Bluetooth Headphones press and HOLD the [ (I) ] button once again until you hear the confirmation tone. FRONT Microphone mute During a conversation, Press the [ + land [ — ]button at the same time until you hear the confirmation tone.The microphone of yourBluetooth Headphones will be mute. While it is in mute mode, your Bluetooth Headphones will beep everySseconds.To cancelmutemode,Press the[ + ]and[ — ]buttonagain until you hearthe confirmation tone. Wearing your Bluetooth Headphones For added comrort and noise suppression, 3 sets of silicone cushions are included with your Bluetooth Headphones. Choose the silicone cushions (5) (M) (L), which fit most comrortably in yourears, and insert them on the Bluetooth Headphones as shown in the diagram below. SML DDD silicone cushions Follow the illustrations to properly wear the head phones. Stereo Bluetooth These headphones allow you to listen (in full stereo) and control” the music on your Bluetooth enabled mobile phone, gaming console, computer or mp3 player and supports the following Bluetooth profiles: - AZDP - Advanced Audio Distribution Profile . AVRCP - AudioNideo Remote Control Profile o HSP - Headset Profile 0 HFP- Handsfree Profile To use the headphones to listen/control music, your Bluetooth enabled device must support the AZDP and AVRCP profiles. Please refer to the userguide of your Bluetooth enabled device for more information. E3 Bluetooth‘ «as...» Stereo Bl uetooth en to a control the music on Wurmobllevhone' Playing music To enjoy wireless music using your Bluetooth Headphones, press the [ d) 1 button ofyour Bluetooth enabled device to begin music playback Once playback has begun, you can control the music or answer phone calls from the control buttons of the Bluetooth Headphones (Not all mobile phones support the control of music using Bluetoothl. Adjusting the volume Press and HOLD the[ + lor[ — ]button to adjust the volume to the desired level. NOTE: You may also adjust the volume from your mobile phone's volume control. Play/Pause* Press the[ (D ] button to pause the music. To resume music playback, press the[ (I) ] button again. Skipping or searching songs* (Dependent on your phone supporting this feature) Press the [ + ] button to go to the next song. Press the [ — ] button to go to the previous song. Forward: Press + Play/Stop (I) Backward: Press I Volume DownzLong Press | Power ON/OFF (I) Volume Up :Long Press + *Emerson Bluetooth stereo wireless headphones are compatible with any brand of Bluetooth-enabled phone or music device that supports Advanced Audio Distribution Profile (AIDPl and AudioVideo Remote Control Profile (AVRCP). In order for Bluehoath devicesm mmmunicatiewith one another pmperl they must utilize the same Bluetooth profile. To determine the profiles supported by your device (mobile phone. gaming console, computer or mp3 player). please refer to the device's user guide. Certain Bluetooth features including those listed may not be supported by all compatible Bluetooth-enabled devices, and/or the functionality of such features may be limited in certain devices. Troubleshoo ng ps lCan pairthe Bluetooth Headphones with my Bluetooth device, but I cannot hear any music? - Make sure your Bluetooth device supports AZDP profile. My iPhone is paired conecdyand I hear music but I cannot control (play, pause, next song' previous song) the music using the controls on the Bluetooth Headphones -At the time ofthis User’s Guide publication, the iPhone only supports the playback of music using Bluetooth, and does not support the control ofthe music using Bluetooth. @ I cannot get the Bluetooth Headphones into Pairing Mode. - Make sure the Bluetooth Headphones are turned off before beginning the pairing process. . Press down and hold the[ d) ] button until the RED and awe lightsflash alternately,this will signal that the headphones are in Pa rig Mode. and ready to connect to your mobile phone. ® My mobile phone is not able to pair with the Bluetooth Headphones - Make sure that you fully charged the headphones before pairing. . Keepyour Bluetooth Headphones and mobile phone within 3 feet of each other during the pairing process. 0 Check that your phone's Bluetooth feature is turned ON. 0 Try repeating the pairing process, see”Pairing the headphones with a Bluetooth enabled device." Q) After successfully pairing my mobile phone and Bluetooth Headphones, when I shut my phone and turn it on again, my headphones did not automatically connect. a Try turning the headphones OFF, and then turning them 0" again. o Many mobile phones have an auto reconnect option when first attempting to reconnect to a newly paired Bluetooth device. Make sure you accept this option, so that your Bluetooth Headphones automatically reconnectstoyour mobile phone: checkthe user guide of your mobile phone for more information regarding this option. . Try unpairing the headphones from your phone, and repeat the pairing procedure, Q) I hear distortion, and the sound quality is poor. . Try keeping the headphones dosertothe Bl letooth enabled device. . Check that the battery is charged enough. ® The sound is very low. a Try adjusting the volume by using the[ + ] button on your headphones; make sure the volume on your mobile phone is turned up as well. Q) The headphones disconnect from my mobile phone. . On some mobile phones ifyou answer an incoming call from the phone instead of the headphones the Bluetooth connection may be lost.Turn the headphones off and then on to reconnect. Safety forma on CAUTION: Do not use this device while operating a motor vehicle.Although these headphones offer handsfree operation, they cover both ears of the user, and are not suitable for use when driving. TO OBTAIN WARRANTY SERVICE: 0 Provide proof of the date of purchase wit 'n the package (Dated bill of sale). - Prepay all shipping costs to the authorized service center, and remember to insure your return. - Indudea return shipping address (no P.0. BOXES), a telephone contact number, and the detective unit within lire package. . Describe the detect or reason you are returning the prodm. Your product will be repaired or replaced, at our option, for the same or similar model of equal value ifexamination by the service center determines this product is defective. Products received damaged as a result ofshipping will require you to file a claim with the carrier. Warranty service not provided This warranty does not cover damage resulting from accident, misuse,abuse.improper installation oroperation, lack ofreasonable care, and unauthorixed modification. This warranty is voided in the event any unauthorized person opens, alters or repairs this product. All products being returned to the authorized service center for repair must be suitably packaged. niesiiipping addressoithe authorined serviae center is: é Southern Telecom Inc. ATTN: Returns Department 1 LC 53rd Street Brooklyn, NY 11232 should you have any questions or problems concerning this product, please contact our customer service department at: (9 1-877-768-8483 (Toll Free) Monday -Thursday: 9AM - 5PM (EST) Friday: 9AM - 3PM (EST) or via e-mail at E cs@southerntelecom.com ~ Do not use these headphones while driving. ~ Observe all signs in the designated areas where some electronic devices or RF radio products are required to be switched off. These could include airplanes, hospitals, blasting areas, and potentially explosive atmospheres. FCC and telephone company information FCC Part 1 5 This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of the Federal Communications Commission (FCC) rules. These requirements are intended to provide reasonable protection against harmful interference in a residential installation. This equipment generates, usesand can radiate radio frequency energy and, f not installed and used in accordance with the instructions, may cause hamiful interference to radio communications However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: . Re-orient or relocate the receiving antenna. . increase the separation between the equipment and receiver. . Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. Do not attempt to repair or modify this equipment. Warnin ‘ Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Warrantyi farma on Limited Warranty In the unlikely event that this product is defective, or does not perform properly, you may within ninety 1 year from your original date of purchase return it to the authorized service center for repair or exchange. Limitation of Warranty: -THE WARRANTY STATED ABOVE IS THE ONLY WARRANTY APPLICABLE TO THIS PRODUCT. ALL OTHER WARRANTIES, EXPRBS OR IMPLIED (INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE) ARE HEREBY DISCLAIMED. NO VERBAL OR WRITTEN INFORMATION GIVEN BY SOUTHERN TELECOM INC. IT'S AGENTS, OR EMPLOYEES SHALL CREATE A GUARANTY OR IN ANY WAY INCREASE THE SCOPE OF THIS WARRANTY. o REPAIROR REPLACEMENTAS PROVIDED UNDERTHIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER. SOUTHERN TELECOM INC. SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OFTHIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. THIS DISCLAIMER OF WARRANTIES AND LIMITED WARRANTY ARE GOVERNED BY THE LAWS OF THE STATE OF NEW YORK. EXCEPTTO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED TO THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE. Some states do not allow the exclusion nor limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts so the above limitations or exclusions may not apply to you. Thiswarranty gives you spec'fic legal rights, and you also may have other rights that vary from state to state. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Emerson and the GrClel logo are registered trademarks or Emerson Radio corp. Parslppany, New lersey USA www.emersonphones.tom The Bluetooth" word mark and logos are owned by the Bluetooth SIG, lnc. sour PlayStatIIon‘ at P53” are either trademarks or registered trademarks of SONY, All other trademarks are trademarks of their respective owners BACK
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Create Date : 2012:12:04 14:28:00+08:00 Creator : Adobe Acrobat 10.1 Modify Date : 2012:12:04 14:28:19+08:00 Title : XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Metadata Date : 2012:12:04 14:28:19+08:00 Creator Tool : Adobe Acrobat 10.1 Format : application/pdf Document ID : uuid:94197b42-b45c-44c8-b22d-215c283d7e3a Instance ID : uuid:34e1a656-ffd9-4522-b60e-7bb6533b41c8 Producer : Adobe Acrobat 10.1 Image Conversion Plug-in Page Count : 1EXIF Metadata provided by EXIF.tools