SMC SMM-107AB Wireless Handheld Microphone User Manual STVD 1001 revised

Download:
Mirror Download [FCC.gov]
Document ID	684380
Application ID	UPhmTNaDRbcioIWwWCFXOQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	3.64kB (45559 bits)
Date Submitted	2006-07-20 00:00:00
Date Available	2006-07-21 00:00:00
Creation Date	2006-06-30 10:26:28
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2006-06-30 10:41:11
Document Title	STVD-1001 revised.cdr
Document Creator	CorelDRAW 10

SMM-107A WIRELESS MICROPHONE OPERATION
1) Open the battery compartment.
2) Place a 9V battery in the compartment as indicated by the polarity symbols (+ and -) marked inside the
compartment of the wireless microphone.
3) Close the battery compartment.
4) The switch on the wireless microphone has three settings:
1. ON - The switch is in the top position. The microphone will function. The red indicator light is on.
2. STANDBY - The switch is in the middle position. The microphone will not function. The red indicator light is
on.
NOTE: The purpose of this setting is to maintain a connection between the microphone and the Singing
Machine when moving around the area in which it is being used. (This function could also be considered a
mute function)
3. OFF - The switch is in the bottom position. The microphone will not function. The red indicator light is off.
NOTE: To ensure long battery life, please make sure that the wireless microphones is set to the OFF position when
not in use. When not in use for a long period of time, we recommend that you remove the DC 9-V battery from the
battery compartment.
WIRELESS MICROPHONE INFORMATION
Warning: Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
FCC NOTICE
This wireless microphone system complies with Part 90 of FCC Rules. There is one frequency available for the
system. You must get a licence for the frequency you plan to use before you use the system.
Please look for this website http://wireless.fcc.gov/uls/ to apply the licence or phone to the nearest FCC offices and
contact them to get the necessary application. Licensibility depends on how you will use the system.
For RF exposure
“IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements, no change to the antenna or
the device is permitted. Any change to the antenna or the device could result in the system exceeding the RF
exposure requirements.”
SAFETY INFORMATION
Your wireless microphone contains a low power transmitter. When the EUT is powered on and it sends out radio
frequency (RF) signals. In August 1996, the Federal Communications Commissions (FCC) adopted RF exposure
guidelines with safety levels for wireless devices.
IMPORTANT
To maintain compliance with the FCC's RF exposure guidelines hold the transmitter and antenna at least 1 inch (2.5
centimetres) from your face and speak in a normal voice, with the antenna pointed up and away from the face.
Insure that the antenna is at least 1 inch (2.5 centimetres) from your body when you using your wireless
microphone.
Use only the supplied antenna. Unauthorised antennas, modifications, or attachments could damage the
transmitter and may violate FCC regulations.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY
UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE
USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
Operation of this device is subject to the following two conditions: (1) this device may not cause interference, and (2)
this device must accept any interference, including interference that may cause undesired operation of the device.
SMM-107B WIRELESS MICROPHONE OPERATION
1) Open the battery compartment.
2) Place a 9V battery in the compartment as indicated by the polarity symbols (+ and -) marked inside the
compartment of the wireless microphone.
3) Close the battery compartment.
4) The switch on the wireless microphone has three settings:
1. ON - The switch is in the top position. The microphone will function. The red indicator light is on.
2. STANDBY - The switch is in the middle position. The microphone will not function. The red indicator light is
on.
NOTE: The purpose of this setting is to maintain a connection between the microphone and the Singing
Machine when moving around the area in which it is being used. (This function could also be considered a
mute function)
3. OFF - The switch is in the bottom position. The microphone will not function. The red indicator light is off.
NOTE: To ensure long battery life, please make sure that the wireless microphones is set to the OFF position when
not in use. When not in use for a long period of time, we recommend that you remove the DC 9-V battery from the
battery compartment.
WIRELESS MICROPHONE INFORMATION
Warning: Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
FCC NOTICE
This wireless microphone system complies with Part 90 of FCC Rules. There is one frequency available for the
system. You must get a licence for the frequency you plan to use before you use the system.
Please look for this website http://wireless.fcc.gov/uls/ to apply the licence or phone to the nearest FCC offices and
contact them to get the necessary application. Licensibility depends on how you will use the system.
For RF exposure
“IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements, no change to the antenna or
the device is permitted. Any change to the antenna or the device could result in the system exceeding the RF
exposure requirements.”
SAFETY INFORMATION
Your wireless microphone contains a low power transmitter. When the EUT is powered on and it sends out radio
frequency (RF) signals. In August 1996, the Federal Communications Commissions (FCC) adopted RF exposure
guidelines with safety levels for wireless devices.
IMPORTANT
To maintain compliance with the FCC's RF exposure guidelines hold the transmitter and antenna at least 1 inch (2.5
centimetres) from your face and speak in a normal voice, with the antenna pointed up and away from the face.
Insure that the antenna is at least 1 inch (2.5 centimetres) from your body when you using your wireless
microphone.
Use only the supplied antenna. Unauthorised antennas, modifications, or attachments could damage the
transmitter and may violate FCC regulations.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY
UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE
USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
Operation of this device is subject to the following two conditions: (1) this device may not cause interference, and (2)
this device must accept any interference, including interference that may cause undesired operation of the device.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Create Date                     : 2006:06:30 10:26:28+08:00
Creator Tool                    : CorelDRAW 10
Modify Date                     : 2006:06:30 10:41:11+08:00
Metadata Date                   : 2006:06:30 10:41:11+08:00
Format                          : application/pdf
Title                           : STVD-1001 revised.cdr
Document ID                     : uuid:65850b7d-97b6-41db-9421-ee62a259e52e
Instance ID                     : uuid:29dffd90-5677-47ca-93c1-da6172711ca4
Has XFA                         : No
Page Count                      : 2
Creator                         : CorelDRAW 10

EXIF Metadata provided by EXIF.tools