SMC SMM-107AB Wireless Handheld Microphone User Manual STVD 1001 revised

International SMC (HK) Ltd. Wireless Handheld Microphone STVD 1001 revised

User Manual

1) Open the battery compartment.2) Place a 9V battery in the compartment as indicated by the polarity symbols (+ and -) marked inside thecompartment of the wireless microphone.3) Close the battery compartment.4) The switch on the wireless microphone has three settings:1. ON - The switch is in the top position.The microphone will function. The red indicator light is on.2. STANDBY - The switch is in the middle position. The microphone will not function. The red indicator light ison.The purpose of this setting is to maintain a connection between the microphone and the SingingMachine when moving around the area in which it is being used. (This function could also be considered amute function)3. OFF - The switch is in the bottom position.The microphone will not function. The red indicator light is off.To ensure long battery life, please make sure that the wireless microphones is set to the OFF position whennot in use. When not in use for a long period of time, we recommend that you remove the DC 9-V batteryThis wireless microphone system complies with Part 90 of FCC Rules. There is one frequency available for thesystem. You must get a licence for the frequency you plan to use before you use the system.Please look for this website to apply the licence or phone to the nearest FCC offices andcontact them to get the necessary application. Licensibility depends on how you will use the system.“IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements, no change to the antenna orthe device is permitted. Any change to the antenna or the device could result in the system exceeding the RFexposure requirements.”Your wireless microphone contains a low power transmitter. When the EUT is powered on and it sends out radiofrequency (RF) signals. In August 1996, the Federal Communications Commissions (FCC) adopted RF exposureguidelines with safety levels for wireless devices.To maintain compliance with the FCC's RF exposure guidelines hold the transmitter and antenna at least 1 inch (2.5centimetres) from your face and speak in a normal voice, with the antenna pointed up and away from the face.Insure that the antenna is at least 1 inch (2.5 centimetres) from your body when you using your wirelessmicrophone.Use only the supplied antenna. Unauthorised antennas, modifications, or attachments could damage thetransmitter and may violate FCC regulations.NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FORANY RADIO OR TV INTERFERENCE CAUSED BYUNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THEUSER’SAUTHORITYTO OPERATE THE EQUIPMENT.Operation of this device is subject to the following two conditions: (1) this device may not cause interference, and (2)this device must accept any interference, including interference that may cause undesired operation of the device.NOTE:NOTE:Warning: Changes or modifications not expressly approved by the party responsible for compliance couldvoid the user’s authority to operate the equipment.FCC NOTICEFor RF exposureSAFETY INFORMATIONIMPORTANTfrom thebattery compartment.http://wireless.fcc.gov/uls/SMM-107A WIRELESS MICROPHONE OPERATIONWIRELESS MICROPHONE INFORMATION
1) Open the battery compartment.2) Place a 9V battery in the compartment as indicated by the polarity symbols (+ and -) marked inside thecompartment of the wireless microphone.3) Close the battery compartment.4) The switch on the wireless microphone has three settings:1. ON - The switch is in the top position.The microphone will function. The red indicator light is on.2. STANDBY - The switch is in the middle position. The microphone will not function. The red indicator light ison.The purpose of this setting is to maintain a connection between the microphone and the SingingMachine when moving around the area in which it is being used. (This function could also be considered amute function)3. OFF - The switch is in the bottom position.The microphone will not function. The red indicator light is off.To ensure long battery life, please make sure that the wireless microphones is set to the OFF position whennot in use. When not in use for a long period of time, we recommend that you remove the DC 9-V batteryThis wireless microphone system complies with Part 90 of FCC Rules. There is one frequency available for thesystem. You must get a licence for the frequency you plan to use before you use the system.Please look for this website to apply the licence or phone to the nearest FCC offices andcontact them to get the necessary application. Licensibility depends on how you will use the system.“IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements, no change to the antenna orthe device is permitted. Any change to the antenna or the device could result in the system exceeding the RFexposure requirements.”Your wireless microphone contains a low power transmitter. When the EUT is powered on and it sends out radiofrequency (RF) signals. In August 1996, the Federal Communications Commissions (FCC) adopted RF exposureguidelines with safety levels for wireless devices.To maintain compliance with the FCC's RF exposure guidelines hold the transmitter and antenna at least 1 inch (2.5centimetres) from your face and speak in a normal voice, with the antenna pointed up and away from the face.Insure that the antenna is at least 1 inch (2.5 centimetres) from your body when you using your wirelessmicrophone.Use only the supplied antenna. Unauthorised antennas, modifications, or attachments could damage thetransmitter and may violate FCC regulations.NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FORANY RADIO OR TV INTERFERENCE CAUSED BYUNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THEUSER’SAUTHORITYTO OPERATE THE EQUIPMENT.Operation of this device is subject to the following two conditions: (1) this device may not cause interference, and (2)this device must accept any interference, including interference that may cause undesired operation of the device.NOTE:NOTE:Warning: Changes or modifications not expressly approved by the party responsible for compliance couldvoid the user’s authority to operate the equipment.FCC NOTICEFor RF exposureSAFETY INFORMATIONIMPORTANTfrom thebattery compartment.http://wireless.fcc.gov/uls/SMM-107B WIRELESS MICROPHONE OPERATIONWIRELESS MICROPHONE INFORMATION

Navigation menu